KDE Plasma bug - all customizing for 2nd Monitor got lost…
Controll-Panel, Wallpaper, etc. Just resolution and ratio are kept 
1 Like
There were a lot of changes made to multi monitor support with Plasma 5.27 LTS. Maybe you did customization and settings upstream didn’t expect. Migration scripts not always catch user changes and either reset or remove things to be able to have a functional desktop.
4 Likes
Mine is 
after said update. No problems or anything.
1 Like
My panel under KDE Plasma disappeared entirely after the update and reboot.
Edit: Nevermind it was on different not connected display. Found it in the panel edit mode like @belyash mentioned.
2 Likes
I got the following warnings, if I continue to update, boot hangs and timeshift restore is needed
:: installing nvidia-utils (530.41.03-4) breaks dependency 'nvidia-utils=525.89.02' required by lib32-nvidia-utils
:: installing nvidia-utils (530.41.03-4) breaks dependency 'nvidia-utils=525.89.02' required by linux515-nvidia
:: installing nvidia-utils (530.41.03-4) breaks dependency 'nvidia-utils=525.89.02' required by linux60-nvidia
I’m facing an issue with dnscrypt-proxy:
[Stable Update] 2023-03-31: DNSCrypt-proxy service no longer works (but dnscrypt itself works)
The service file stops with an error, but if I manually execute dnscrypt-proxy, it works.
EDIT:
Solved.
Well, it depends which kernel you are running. 6.0 for example got dropped. You may want to first install a newer kernel. Those nvidia-utils warnings might indicate that.
error: no such cryptodisk found , perhaps a needed disk or cryptodisk module is not loaded.
Press any key to continue …”
Re-installing grub should fix that. A similar issue was already posted in the testing threads: GRUB/Restore the GRUB Bootloader - Manjaro Also some discussion started here regarding luks encrypted installs: Can't boot LUKS encrypted install after 2023-03-31 stable update
After update to stable Manjaro Gnome I see following message after I enter the encryption password.
error: no such cryptodisk found. perhaps a needed disk or cryptodisk module is not loaded.
Press any key to continue …
Laptop boot-up OK automatically afterwards. Any suggestion?
Minor issues - 2nd monitor panel was incorrect so recreated it. Also a shortcut for Darktable on the Task Manager was not found so recreated it. Everything else perfect so far - slight delay on first boot but to be expected.
1 Like
Interesting first bug - many conkies have just turned RED.
I fixed one - instead of color #666, now we must put #666666
1 Like
Thanx, i’d got the same issue. Now it works well with xsettingsd.
1 Like
4 posts were merged into an existing topic: Can’t boot LUKS encrypted install after 2023-03-31 stable update
First time poster and first time I have had to report an issue with an upgrade. It seems that this upgrade has cause the Deluge torrent program to be unable to start. I’m not really sure what all information is needed to help out with this. I will post the error I found in the system logs as a start.
██████████████████ ████████
██████████████████ ████████ ----------------------
██████████████████ ████████ OS: Manjaro Linux x86_64
██████████████████ ████████ Kernel: 6.2.8-1-MANJARO
████████ ████████ Uptime: 31 mins
████████ ████████ ████████ Packages: 1389 (pacman), 11 (flatpak), 6 (snap)
████████ ████████ ████████ Shell: bash 5.1.16
████████ ████████ ████████ Resolution: 2560x1440, 3840x2160
████████ ████████ ████████ DE: Plasma 5.27.3
████████ ████████ ████████ WM: KWin
████████ ████████ ████████ Theme: [Plasma], Breeze [GTK2/3]
████████ ████████ ████████ Icons: [Plasma], breeze [GTK2/3]
████████ ████████ ████████ Terminal: konsole
████████ ████████ ████████ CPU: Intel i9-9900K (16) @ 5.000GHz
GPU: NVIDIA GeForce RTX 2080 SUPER
GPU: Intel CoffeeLake-S GT2 [UHD Graphics 630]
GPU: Intel DG2 [Arc A770]
Memory: 5525MiB / 64158MiB
3/31/23 5:45 AM systemd-coredump Process 15779 (deluge-gtk) of user 1000 dumped core.
Stack trace of thread 15779:
#0 0x00007f107756f35d n/a (libc.so.6 + 0x15635d)
#1 0x00007f107492fa78 g_strdup (libglib-2.0.so.0 + 0x7aa78)
#2 0x00007f1073ac1bc9 pango_font_description_copy (libpango-1.0.so.0 + 0x13bc9)
#3 0x00007f1075a374f6 n/a (libffi.so.8 + 0x74f6)
#4 0x00007f1075a33f5e n/a (libffi.so.8 + 0x3f5e)
#5 0x00007f1075a36b73 ffi_call (libffi.so.8 + 0x6b73)
#6 0x00007f10754b8941 n/a (_gi.cpython-310-x86_64-linux-gnu.so + 0x2b941)
#7 0x00007f10754b7290 n/a (_gi.cpython-310-x86_64-linux-gnu.so + 0x2a290)
#8 0x00007f10754aa37e n/a (_gi.cpython-310-x86_64-linux-gnu.so + 0x1d37e)
#9 0x00007f107775031b _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x15031b)
#10 0x00007f107774b726 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14b726)
#11 0x00007f107774f5fb _PyObject_FastCallDictTstate (libpython3.10.so.1.0 + 0x14f5fb)
#12 0x00007f107775f21d n/a (libpython3.10.so.1.0 + 0x15f21d)
#13 0x00007f10777502f3 _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x1502f3)
#14 0x00007f107774b14c _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14b14c)
#15 0x00007f10777570e9 _PyFunction_Vectorcall (libpython3.10.so.1.0 + 0x1570e9)
#16 0x00007f107774676a _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14676a)
#17 0x00007f1077762596 n/a (libpython3.10.so.1.0 + 0x162596)
#18 0x00007f1077746336 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x146336)
#19 0x00007f1077762596 n/a (libpython3.10.so.1.0 + 0x162596)
#20 0x00007f1077747476 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x147476)
#21 0x00007f107774f5fb _PyObject_FastCallDictTstate (libpython3.10.so.1.0 + 0x14f5fb)
#22 0x00007f107775f21d n/a (libpython3.10.so.1.0 + 0x15f21d)
#23 0x00007f10777502f3 _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x1502f3)
#24 0x00007f107774b14c _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14b14c)
#25 0x00007f107774f5fb _PyObject_FastCallDictTstate (libpython3.10.so.1.0 + 0x14f5fb)
#26 0x00007f107775f21d n/a (libpython3.10.so.1.0 + 0x15f21d)
#27 0x00007f10777502f3 _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x1502f3)
#28 0x00007f107774b14c _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14b14c)
#29 0x00007f107774f5fb _PyObject_FastCallDictTstate (libpython3.10.so.1.0 + 0x14f5fb)
#30 0x00007f107775f21d n/a (libpython3.10.so.1.0 + 0x15f21d)
#31 0x00007f10777502f3 _PyObject_MakeTpCall (libpython3.10.so.1.0 + 0x1502f3)
#32 0x00007f107774b14c _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14b14c)
#33 0x00007f10777570e9 _PyFunction_Vectorcall (libpython3.10.so.1.0 + 0x1570e9)
#34 0x00007f1077748e4b _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x148e4b)
#35 0x00007f10777570e9 _PyFunction_Vectorcall (libpython3.10.so.1.0 + 0x1570e9)
#36 0x00007f1077747476 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x147476)
#37 0x00007f10777570e9 _PyFunction_Vectorcall (libpython3.10.so.1.0 + 0x1570e9)
#38 0x00007f107774676a _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x14676a)
#39 0x00007f10777570e9 _PyFunction_Vectorcall (libpython3.10.so.1.0 + 0x1570e9)
#40 0x00007f1077746336 _PyEval_EvalFrameDefault (libpython3.10.so.1.0 + 0x146336)
#41 0x00007f1077744f80 n/a (libpython3.10.so.1.0 + 0x144f80)
#42 0x00007f10777f39e4 PyEval_EvalCode (libpython3.10.so.1.0 + 0x1f39e4)
#43 0x00007f1077804383 n/a (libpython3.10.so.1.0 + 0x204383)
#44 0x00007f10777ffaea n/a (libpython3.10.so.1.0 + 0x1ffaea)
#45 0x00007f10776a223f n/a (libpython3.10.so.1.0 + 0xa223f)
#46 0x00007f10776a1ef0 _PyRun_SimpleFileObject (libpython3.10.so.1.0 + 0xa1ef0)
#47 0x00007f10776a28a3 _PyRun_AnyFileObject (libpython3.10.so.1.0 + 0xa28a3)
#48 0x00007f1077810b5d Py_RunMain (libpython3.10.so.1.0 + 0x210b5d)
#49 0x00007f10777e4f3b Py_BytesMain (libpython3.10.so.1.0 + 0x1e4f3b)
#50 0x00007f107743c790 n/a (libc.so.6 + 0x23790)
#51 0x00007f107743c84a __libc_start_main (libc.so.6 + 0x2384a)
#52 0x00005570c1050045 _start (python3.10 + 0x1045)
Stack trace of thread 15796:
#0 0x00007f10775190dd syscall (libc.so.6 + 0x1000dd)
#1 0x00007f1074965d03 g_cond_wait_until (libglib-2.0.so.0 + 0xb0d03)
#2 0x00007f10748d9f83 n/a (libglib-2.0.so.0 + 0x24f83)
#3 0x00007f10749419fb n/a (libglib-2.0.so.0 + 0x8c9fb)
#4 0x00007f107493c315 n/a (libglib-2.0.so.0 + 0x87315)
#5 0x00007f107749ebb5 n/a (libc.so.6 + 0x85bb5)
#6 0x00007f1077520d90 n/a (libc.so.6 + 0x107d90)
Stack trace of thread 15788:
#0 0x00007f10775190dd syscall (libc.so.6 + 0x1000dd)
#1 0x00007f10749657b5 g_cond_wait (libglib-2.0.so.0 + 0xb07b5)
#2 0x00007f10748d9fb4 n/a (libglib-2.0.so.0 + 0x24fb4)
#3 0x00007f1074940f9e n/a (libglib-2.0.so.0 + 0x8bf9e)
#4 0x00007f107493c315 n/a (libglib-2.0.so.0 + 0x87315)
#5 0x00007f107749ebb5 n/a (libc.so.6 + 0x85bb5)
#6 0x00007f1077520d90 n/a (libc.so.6 + 0x107d90)
Stack trace of thread 15789:
#0 0x00007f10775139df __poll (libc.so.6 + 0xfa9df)
#1 0x00007f107496c17f n/a (libglib-2.0.so.0 + 0xb717f)
#2 0x00007f107490e1a2 g_main_context_iteration (libglib-2.0.so.0 + 0x591a2)
#3 0x00007f107490e1f2 n/a (libglib-2.0.so.0 + 0x591f2)
#4 0x00007f107493c315 n/a (libglib-2.0.so.0 + 0x87315)
#5 0x00007f107749ebb5 n/a (libc.so.6 + 0x85bb5)
#6 0x00007f1077520d90 n/a (libc.so.6 + 0x107d90)
Stack trace of thread 15790:
#0 0x00007f10775139df __poll (libc.so.6 + 0xfa9df)
#1 0x00007f107496c17f n/a (libglib-2.0.so.0 + 0xb717f)
#2 0x00007f107490ec7f g_main_loop_run (libglib-2.0.so.0 + 0x59c7f)
#3 0x00007f1074539d5c n/a (libgio-2.0.so.0 + 0x10ed5c)
#4 0x00007f107493c315 n/a (libglib-2.0.so.0 + 0x87315)
#5 0x00007f107749ebb5 n/a (libc.so.6 + 0x85bb5)
#6 0x00007f1077520d90 n/a (libc.so.6 + 0x107d90)
ELF object binary architecture: AMD x86-64
This helped in resolving the issue.
1 Like
I have the same problem kernel 5.4
Some Qt apps got lost after the update (no such file or directory), PlayStation 2 Emulator fully unusable now from the manager (cannot install any AUR of it and Flatpak version cannot detect any other disks or games)… Well, reinstalling the apps and using official AppImage of PCSX2 solved these problems, but one I couldn’t fix:
Cannot start any OBS version (for the previous versions is 'no such file or directory' and impossible to run directly, and 'core dumped' for the latest one):
details from terminal
It also says “libDeckLinkAPI.so: no such file or directory” at one line down.
debug: Found portal inhibitor
debug: Attempted path: share/obs/obs-studio/locale/en-US.ini
debug: Attempted path: /usr/share/obs/obs-studio/locale/en-US.ini
debug: Attempted path: share/obs/obs-studio/locale.ini
debug: Attempted path: /usr/share/obs/obs-studio/locale.ini
debug: Attempted path: share/obs/obs-studio/locale/ru-RU.ini
debug: Attempted path: /usr/share/obs/obs-studio/locale/ru-RU.ini
info: Using preferred locale 'ru-RU'
debug: Attempted path: share/obs/obs-studio/themes/Dark.qss
debug: Attempted path: /usr/share/obs/obs-studio/themes/Dark.qss
info: Using EGL/X11
info: CPU Name: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz
info: CPU Speed: 1600.000MHz
info: Physical Cores: 4, Logical Cores: 4
info: Physical Memory: 7885MB Total, 630MB Free
info: Kernel Version: Linux 5.15.104-2-MANJARO
info: Distribution: "Manjaro Linux" Unknown
info: Session Type: x11
info: Window System: X11.0, Vendor: The X.Org Foundation, Version: 1.21.1
info: Qt Version: 6.4.3 (runtime), 6.4.2 (compiled)
info: Portable mode: false
qt.core.qmetaobject.connectslotsbyname: QMetaObject::connectSlotsByName: No matching signal for on_tbar_position_valueChanged(int)
info: OBS 29.0.2-2 (linux)
info: ---------------------------------
info: ---------------------------------
info: audio settings reset:
samples per sec: 48000
speakers: 2
max buffering: 960 milliseconds
buffering type: dynamically increasing
info: ---------------------------------
info: Initializing OpenGL...
info: Loading up OpenGL on adapter NVIDIA Corporation NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2
info: OpenGL loaded successfully, version 3.3.0 NVIDIA 530.41.03, shading language 3.30 NVIDIA via Cg compiler
info: ---------------------------------
info: video settings reset:
base resolution: 1920x1080
output resolution: 1920x1080
downscale filter: Bicubic
fps: 48/1
format: NV12
YUV mode: Rec. 709/Partial
info: NV12 texture support not available
info: P010 texture support not available
info: Audio monitoring device:
name: По умолчанию
id: default
info: ---------------------------------
warning: Failed to load 'en-US' text for module: 'decklink-captions.so'
warning: Failed to load 'en-US' text for module: 'decklink-output-ui.so'
libDeckLinkAPI.so: невозможно открыть разделяемый объектный файл: Нет такого файла или каталога
warning: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
warning: Failed to initialize module 'decklink.so'
info: [pipewire] Available captures:
info: [pipewire] - Desktop capture
info: [pipewire] - Window capture
info: NVENC supported
zsh: segmentation fault (core dumped) obs