tomdf
December 14, 2022, 3:59pm
1
Hi there,
systemctl status --user ssh-agent ✔
● ssh-agent.service - SSH key agent
Loaded: loaded (/usr/lib/systemd/user/ssh-agent.service; disabled; preset: enabled)
Active: active (running) since Wed 2022-12-14 15:43:57 WET; 3min 38s ago
Main PID: 2065 (ssh-agent)
Tasks: 1 (limit: 19069)
Memory: 1.0M
CPU: 5ms
CGroup: /user.slice/user-1000.slice/user@1000.service/app.slice/ssh-agent.service
└─2065 /usr/bin/ssh-agent -D -a /run/user/1000/ssh-agent.socket
Dec 14 15:43:57 mini2 systemd[625]: Started SSH key agent.
Dec 14 15:43:57 mini2 ssh-agent[2065]: SSH_AUTH_SOCK=/run/user/1000/ssh-agent.socket; export SSH_AUT>
Dec 14 15:43:57 mini2 ssh-agent[2065]: echo Agent pid 2065;
KeepassXC sais: no agent running
i put in keepassXC:
enable SSH Agent integration
i use zsh konsole
however it does not work.
thanks a lot for your kind help
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text
FYI, it’s <pre><code> for code blocks.
xabbu
December 14, 2022, 4:56pm
3
Just to clarify, do you have a problem with ssh or your fancy ssh-agend, KeepassXC combo. Neither ssh-agend or KeepassXC are needed for ssh. This is just a fancy way so you don’t have to type in a password.
So what happens if you just use ssh and type in your password?
tomdf
December 14, 2022, 6:14pm
4
hi thanks a lot for your answer:
~ inxi --admin --verbosity=7 --filter --no-host --width 1 ✘
System:
Kernel: 5.15.81-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=3bc41958-c5d5-4d33-a5d5-da80bff9c294 rw quiet
udev.log_priority=3
Desktop: KDE Plasma v: 5.26.4 tk: Qt v: 5.15.7 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: Apple product: Macmini5,1 v: 1.0
serial: <superuser required> Chassis: type: 16 v: Mac-8ED6AF5B48C039E1
serial: <superuser required>
Mobo: Apple model: Mac-8ED6AF5B48C039E1 v: Macmini5,1
serial: <superuser required> UEFI: Apple v: MM51.88Z.0080.B00.1804091930
date: 04/09/2018
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: discharging
Memory:
RAM: total: 15.54 GiB used: 3.18 GiB (20.4%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-2415M bits: 64 type: MT MCP arch: Sandy Bridge
gen: core 2 level: v2 built: 2010-12 process: Intel 32nm family: 6
model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 823 high: 858 min/max: 800/2900 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 858 2: 798 3: 840 4: 798
bogomips: 18367
Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs ida lahf_lm lm mca mce
md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid
pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdtscp rep_good
sep ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Apple driver: i915 v: kernel arch: Gen-6 process: Intel 32nm
built: 2011 ports: active: DP-1,HDMI-A-3 empty: DP-2, DP-3, HDMI-A-1,
HDMI-A-2, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0126 class-ID: 0300
Display: x11 server: X.Org v: 21.1.4 with: Xwayland v: 22.1.5
compositor: kwin_x11 driver: X: loaded: modesetting alternate: fbdev,vesa
dri: crocus gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.00x11.22")
s-diag: 1055mm (41.54")
Monitor-1: DP-1 pos: primary,left model: ASUS VA24E serial: <filter>
built: 2020 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-2: HDMI-A-3 mapped: HDMI-3 pos: right model: ASUS VA24E
serial: <filter> built: 2020 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: OpenGL v: 3.3 Mesa 22.2.4 renderer: Mesa Intel HD Graphics 3000 (SNB
GT2) direct render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20
class-ID: 0403
Sound API: ALSA v: k5.15.81-1-MANJARO running: yes
Sound Server-1: JACK v: 1.9.21 running: no
Sound Server-2: PulseAudio v: 16.1 running: yes
Sound Server-3: PipeWire v: 0.3.61 running: yes
Network:
Device-1: Broadcom NetXtreme BCM57765 Gigabit Ethernet PCIe driver: tg3
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 02:00.0
chip-ID: 14e4:16b4 class-ID: 0200
IF: enp2s0f0 state: down mac: <filter>
Device-2: Broadcom BCM4331 802.11a/b/g/n driver: bcma-pci-bridge v: N/A
modules: bcma pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0
chip-ID: 14e4:4331 class-ID: 0280
Device-3: Edimax EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
type: USB driver: rtl8192cu bus-ID: 1-1.2:4 chip-ID: 7392:7811 class-ID: 0000
serial: <filter>
IF: wlp0s26f7u1u2 state: down mac: <filter>
IF-ID-1: wlp3s0b1 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Apple Bluetooth Host Controller type: USB driver: btusb v: 0.8
bus-ID: 1-1.1.3:8 chip-ID: 05ac:8281 class-ID: fe01
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 465.76 GiB used: 19.35 GiB (4.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: 2B6Q scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 465.46 GiB size: 457.09 GiB (98.20%) used: 19.35 GiB (4.2%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: 3bc41958-c5d5-4d33-a5d5-da80bff9c294
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: NO_LABEL
uuid: 2679-22AA
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 1-1:2 info: Microchip (formerly SMSC) 2.0 Hub ports: 3 rev: 2.0
speed: 480 Mb/s power: 2mA chip-ID: 0424:2513 class-ID: 0900
Hub-3: 1-1.1:3 info: Broadcom BCM2046B1 USB 2.0 Hub (part of BCM2046
Bluetooth) ports: 3 rev: 2.0 speed: 12 Mb/s power: 94mA chip-ID: 0a5c:4500
class-ID: 0900
Device-1: 1-1.1.3:8 info: Apple Bluetooth Host Controller type: Bluetooth
driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip-ID: 05ac:8281
class-ID: fe01
Device-2: 1-1.2:4 info: Edimax EW-7811Un 802.11n Wireless Adapter [Realtek
RTL8188CUS] type: Network driver: rtl8192cu interfaces: 1 rev: 2.0
speed: 480 Mb/s power: 500mA chip-ID: 7392:7811 class-ID: 0000
serial: <filter>
Device-3: 1-1.3:5 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
power: 98mA chip-ID: 046d:c52b class-ID: 0300
Hub-4: 2-0:1 info: Full speed or root hub ports: 8 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-5: 2-1:2 info: Microchip (formerly SMSC) 2.0 Hub ports: 3 rev: 2.0
speed: 480 Mb/s power: 2mA chip-ID: 0424:2513 class-ID: 0900
Device-1: 2-1.1:3 info: Apple Built-in IR Receiver type: HID
driver: appleir,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA
chip-ID: 05ac:8242 class-ID: 0300
Device-2: 2-1.3:4 info: Cherry GmbH Keyboard type: Keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s
power: 100mA chip-ID: 046a:b090 class-ID: 0300
Hub-6: 3-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip-ID: 1d6b:0001 class-ID: 0900
Hub-7: 4-0:1 info: Full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip-ID: 1d6b:0001 class-ID: 0900
Sensors:
System Temperatures: cpu: 59.0 C mobo: 50.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 222 Uptime: 2h 30m wakeups: 4 Init: systemd v: 251
default: graphical tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6
Packages: 1275 pm: pacman pkgs: 1266 libs: 326 tools: pamac pm: flatpak
pkgs: 0 pm: snap pkgs: 9 Shell: Zsh v: 5.9 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.23
edited to adjust format
tomdf
December 14, 2022, 6:15pm
5
Hi,user@myserver.com
flipper
December 14, 2022, 7:16pm
6
Please check, by creating the /etc/profile.d/ssh_auth_sock.sh file
The other way works automatically. This is important, since with that, i can use it in other applications to.
[grafik]
If you dont want to install the AUR package, you can create the shell script and insert, the content by yourself. You must do that with root privileges. For example on the shell:
sudo nano /etc/profile.d/ssh_auth_sock.sh
then insert both lines:
#!/bin/sh
export SSH_AUTH_SOCK="$XDG_RUNTIME_DIR/ssh-agent.socket"
Save this with Ctrl + X > Enter
Make it executable with: sud…
xabbu
December 14, 2022, 7:23pm
7
Then try with
ssh -v user@myserver.com
and check at which point the connections hangs. You can add v to get even more verbose output.
Please use proper formatting, see
Difficulty: ★☆☆☆☆
Discourse – this forum’s engine – uses Markdown to format its posts, and removes “unnecessary” whitespace.
Terminal commands often produce output formatted so that they are better readable by the user, taking advantage of the monospaced font used.
Programming code often rely on indentation to make it more readable.
I’ve corrected your post for better readability this time.
How did you use ssh to log in to your servers?
What did you usually do - which now does not work anymore?
tomdf
December 15, 2022, 2:48pm
10
thanks for your answer.
...
~ ssh -v name@myserver.com INT ✘ 4s
OpenSSH_9.1p1, OpenSSL 3.0.7 1 Nov 2022
debug1: Reading configuration data /home/tom/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Connecting to myserver [164.68.102.220]
debug1: Connection established.
debug1: identity file /home/tom/.ssh/id_rsa type 0
debug1: identity file /home/tom/.ssh/id_rsa-cert type -1
debug1: identity file /home/tom/.ssh/id_ecdsa type -1
debug1: identity file /home/tom/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/tom/.ssh/id_ecdsa_sk type -1
debug1: identity file /home/tom/.ssh/id_ecdsa_sk-cert type -1
debug1: identity file /home/tom/.ssh/id_ed25519 type -1
debug1: identity file /home/tom/.ssh/id_ed25519-cert type -1
debug1: identity file /home/tom/.ssh/id_ed25519_sk type -1
debug1: identity file /home/tom/.ssh/id_ed25519_sk-cert type -1
debug1: identity file /home/tom/.ssh/id_xmss type -1
debug1: identity file /home/tom/.ssh/id_xmss-cert type -1
debug1: identity file /home/tom/.ssh/id_dsa type -1
debug1: identity file /home/tom/.ssh/id_dsa-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_9.1
debug1: Remote protocol version 2.0, remote software version OpenSSH_8.2p1 Ubuntu-4ubuntu0.4
debug1: compat_banner: match: OpenSSH_8.2p1 Ubuntu-4ubuntu0.4 pat OpenSSH* compat 0x04000000
debug1: Authenticating to server as 'root'
debug1: load_hostkeys: fopen /home/tom/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
Connection closed by 164.68.102.220 port 69
...
post edited for readability
There seem to be no file with hostkeys
Has this host ever been connected from this user in this machine ?
)