SSD USB JMicron JMS567 ID 152d:0562 only works fine on Windows and mac

Support
,
1

When I connect the SSD to any USB port I got the following messages on dmesg:

[  411.669802] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  411.686276] usb 2-2: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 6.06
[  411.686298] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  411.686305] usb 2-2: Product: External
[  411.686310] usb 2-2: Manufacturer: JMicron
[  411.686314] usb 2-2: SerialNumber: DD56419884719
[  412.273840] usbcore: registered new interface driver usb-storage
[  412.279914] scsi host3: uas
[  412.279974] usbcore: registered new interface driver uas
[  412.397915] scsi 3:0:0:0: Direct-Access     JMicron  Tech             0606 PQ: 0 ANSI: 6
[  412.399470] sd 3:0:0:0: Attached scsi generic sg1 type 0
[  412.400536] sd 3:0:0:0: [sdb] 15624192 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[  412.400661] sd 3:0:0:0: tag#28 data cmplt err -75 uas-tag 1 inflight: CMD
[  412.400669] sd 3:0:0:0: tag#28 CDB: Mode Sense(6) 1a 00 3f 00 04 00
[  412.400696] sd 3:0:0:0: [sdb] Write Protect is off
[  412.400701] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00


[  443.475701] sd 3:0:0:0: tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  443.475713] sd 3:0:0:0: tag#29 CDB: Mode Sense(6) 1a 00 08 00 04 00
[  443.512485] scsi host3: uas_eh_device_reset_handler start
[  443.636385] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  443.655699] scsi host3: uas_eh_device_reset_handler success
[  443.662326] sd 3:0:0:0: tag#29 data cmplt err -75 uas-tag 1 inflight: CMD
[  443.662339] sd 3:0:0:0: tag#29 CDB: Mode Sense(6) 1a 00 08 00 04 00
[  443.662413] sd 3:0:0:0: [sdb] Asking for cache data failed
[  443.662418] sd 3:0:0:0: [sdb] Assuming drive cache: write through


[  474.195418] sd 3:0:0:0: tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  474.195431] sd 3:0:0:0: tag#29 CDB: Inquiry 12 01 00 00 40 00
[  474.225512] scsi host3: uas_eh_device_reset_handler start
[  474.349679] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  474.368299] scsi host3: uas_eh_device_reset_handler success
[  474.379078] sd 3:0:0:0: [sdb] Optimal transfer size 268431360 bytes
[  474.417247]  sdb: sdb1
[  474.419356] sd 3:0:0:0: tag#28 data cmplt err -75 uas-tag 1 inflight: CMD
[  474.419366] sd 3:0:0:0: tag#28 CDB: Mode Sense(6) 1a 00 3f 00 04 00


[  504.915607] sd 3:0:0:0: tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  504.915620] sd 3:0:0:0: tag#29 CDB: Mode Sense(6) 1a 00 08 00 04 00
[  504.918167] sd 3:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
[  504.918179] sd 3:0:0:0: [sdb] tag#20 CDB: Inquiry 12 00 00 00 24 00
[  504.955326] scsi host3: uas_eh_device_reset_handler start
[  505.079594] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  505.098376] scsi host3: uas_eh_device_reset_handler success
[  505.100875] sd 3:0:0:0: tag#29 data cmplt err -75 uas-tag 1 inflight: CMD
[  505.100885] sd 3:0:0:0: tag#29 CDB: Mode Sense(6) 1a 00 08 00 04 00


[  535.635296] sd 3:0:0:0: tag#28 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[  535.635309] sd 3:0:0:0: tag#28 CDB: Inquiry 12 01 00 00 40 00
[  535.637955] sd 3:0:0:0: [sdb] tag#24 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
[  535.637967] sd 3:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 00 ee 67 f0 00 00 01 00
[  535.689054] scsi host3: uas_eh_device_reset_handler start
[  535.812894] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  535.831557] scsi host3: uas_eh_device_reset_handler success
[  535.838720] sd 3:0:0:0: [sdb] Attached SCSI disk

The blank lines between messages denote several seconds.

Before and after connect the SSD:

$ lsusb -t -v
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 5000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 7: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
        ID 8087:0a2a Intel Corp. Bluetooth wireless interface
    |__ Port 7: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
        ID 8087:0a2a Intel Corp. Bluetooth wireless interface
    |__ Port 9: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
        ID 04f2:b5f7 Chicony Electronics Co., Ltd
    |__ Port 9: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
        ID 04f2:b5f7 Chicony Electronics Co., Ltd


$ lsusb -t -v
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/8p, 5000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
    |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
        ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6Gb/s bridge
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 7: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
        ID 8087:0a2a Intel Corp. Bluetooth wireless interface
    |__ Port 7: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
        ID 8087:0a2a Intel Corp. Bluetooth wireless interface
    |__ Port 9: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
        ID 04f2:b5f7 Chicony Electronics Co., Ltd
    |__ Port 9: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
        ID 04f2:b5f7 Chicony Electronics Co., Ltd

Output of neofetch on my laptop:

██████████████████  ████████   peracchi@nitro
██████████████████  ████████   --------------
██████████████████  ████████   OS: Manjaro Linux x86_64
██████████████████  ████████   Host: Nitro AN515-51 V1.22
████████            ████████   Kernel: 5.11.10-1-MANJARO
████████  ████████  ████████   Uptime: 10 mins
████████  ████████  ████████   Packages: 1185 (pacman)
████████  ████████  ████████   Shell: bash 5.1.0
████████  ████████  ████████   Resolution: 1920x1080
████████  ████████  ████████   DE: Plasma 5.21.3
████████  ████████  ████████   WM: KWin
████████  ████████  ████████   Theme: Breath2 [Plasma], Breath [GTK2/3]
████████  ████████  ████████   Icons: breath2 [Plasma], breath2 [GTK2/3]
████████  ████████  ████████   Terminal: konsole
                               Terminal Font: Noto Mono 10
                               CPU: Intel i7-7700HQ (8) @ 3.800GHz
                               GPU: NVIDIA GeForce GTX 1050 Ti Mobile
                               GPU: Intel HD Graphics 630
                               Memory: 922MiB / 15893MiB

Link to product: China Customized FS200 Mini Portable SSD - USB3.1 Manufacturers, Suppliers - Factory Direct Wholesale - DM Life Technology

2

having some issues with my 2 tb seagate basic where the log looks somewhat similar to yours, the drive would seemingly disconnect every few minutes. plugging into a 2.0 usb port insted of a 3.0 usb port solved the issue. Not sure it we’re actually facing the same problem, might make my own post later if not.

1 Like
3

These sticks are not compatible due used sectore size:
image
error message with Rufus.
These stickes are completly unusual, I don’t use them not even once.
The risk of data loss is too high
Best way: get your money back

I’m looking for firmware update on JMicron site but there is no MS567 controller.

1 Like