Sometimes when I startup I just get a blank screen. I can press Alt+F6 and startx from there. It seems to happen only after the first startup of the day. What can I do to troubleshoot this?
You could start here.
Thanks. Once I experience it again, I’ll try the info.
I shutdown and let it sit for a few hours. When I started it up here’s what I got. What should I be looking for?
sudo dmesg -l emerg,alert,crit,err,warn
[ 0.323666] TSC synchronization [CPU#0 -> CPU#8]:
[ 0.323667] Measured 4698 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.324726] #9 #10 #11 #12 #13 #14 #15
[ 0.332141] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.608333] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
[ 0.608449] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.608450] pci 0000:00:00.2: PCI INT A: not connected
[ 0.611231] PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.621451] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 0.638542] nvme nvme0: missing or invalid SUBNQN field.
[ 0.944752] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.029924] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.417334] nvidia: loading out-of-tree module taints kernel.
[ 1.417341] nvidia: module license 'NVIDIA' taints kernel.
[ 1.417342] Disabling lock debugging due to kernel taint
[ 1.485271] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 450.66 Wed Aug 12 19:42:48 UTC 2020
[ 1.594053] i2c_hid i2c-MSFT0001:00: supply vdd not found, using dummy regulator
[ 1.594074] i2c_hid i2c-MSFT0001:00: supply vddl not found, using dummy regulator
[ 1.621017] snd_pci_acp3x 0000:05:00.5: Invalid ACP audio mode : 0
[ 1.894072] iwlwifi 0000:04:00.0: api flags index 2 larger than supported by driver
[ 1.894362] iwlwifi 0000:04:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2
[ 2.168202] ATPX version 1, functions 0x00000001
[ 2.168335] ATPX Hybrid Graphics
[ 2.174369] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[ 2.174371] caller pci_map_rom+0x68/0x171 mapping multiple BARs
[ 2.192069] usb: port power management may be unreliable
[ 2.399563] thermal thermal_zone0: failed to read out thermal zone (-61)
[ 2.730145] sos fw version = 0x11003c.
[ 2.926037] SMU driver if version not matched
[ 3.239088] uvcvideo 1-3:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 3.239093] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.239095] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.239097] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.758946] kauditd_printk_skb: 39 callbacks suppressed
[ 192.914903] [drm:mod_hdcp_add_display_to_topology [amdgpu]] *ERROR* Failed to add display topology, DTM TA is not initialized.
[ 192.914908] [drm] [Link 0] WARNING MOD_HDCP_STATUS_FAILURE IN STATE HDCP_UNINITIALIZED STAY COUNT 0
[ 202.694998] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[ 202.695329] caller _nv030454rm+0x58/0xa0 [nvidia] mapping multiple BARs
[ 202.698961] ACPI Warning: \_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200326/nsarguments-59)
[ 203.096656] NVRM: nv_acpi_dsm_method: DSM data invalid!
[ 205.992326] kauditd_printk_skb: 4 callbacks suppressed
[ 237.466951] kauditd_printk_skb: 6 callbacks suppressed
journalctl -x -p3 -b1
-- Logs begin at Mon 2020-08-31 18:48:20 PST, end at Tue 2020-09-01 21:11:27 PS>
Aug 31 18:48:20 magicpotion kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/wr>
Aug 31 18:48:20 magicpotion kernel: snd_pci_acp3x 0000:05:00.5: Invalid ACP aud>
Aug 31 18:48:22 magicpotion systemd-backlight[919]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has fin>
░░
░░ The job identifier is 463 and the job result is failed.
Aug 31 18:48:22 magicpotion systemd-backlight[920]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video1.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video1.service has fin>
░░
░░ The job identifier is 469 and the job result is failed.
Aug 31 18:48:24 magicpotion kernel: [drm:mod_hdcp_add_display_topology [amdgpu]>
Aug 31 18:48:24 magicpotion bluetoothd[1297]: Failed to set mode: Blocked throu>
Aug 31 18:48:28 magicpotion gdm-password][1728]: gkr-pam: unable to locate daem>
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for Headset >
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for :1.65/Pr>
Aug 31 18:48:55 magicpotion kernel: watchdog: watchdog0: watchdog did not stop!
...skipping...
-- Logs begin at Mon 2020-08-31 18:48:20 PST, end at Tue 2020-09-01 21:11:27 PS>
Aug 31 18:48:20 magicpotion kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/wr>
Aug 31 18:48:20 magicpotion kernel: snd_pci_acp3x 0000:05:00.5: Invalid ACP aud>
Aug 31 18:48:22 magicpotion systemd-backlight[919]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has fin>
░░
░░ The job identifier is 463 and the job result is failed.
Aug 31 18:48:22 magicpotion systemd-backlight[920]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video1.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video1.service has fin>
░░
░░ The job identifier is 469 and the job result is failed.
Aug 31 18:48:24 magicpotion kernel: [drm:mod_hdcp_add_display_topology [amdgpu]>
Aug 31 18:48:24 magicpotion bluetoothd[1297]: Failed to set mode: Blocked throu>
Aug 31 18:48:28 magicpotion gdm-password][1728]: gkr-pam: unable to locate daem>
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for Headset >
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for :1.65/Pr>
Aug 31 18:48:55 magicpotion kernel: watchdog: watchdog0: watchdog did not stop!
~
ESCOC
PST, end at Tue 2020-09-01 21:11:27 PST. --
0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
pci_acp3x 0000:05:00.5: Invalid ACP audio mode : 0
light[919]: Failed to get backlight or LED device 'backlight:acpi_video0': No s>
Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
-backlight@backlight:acpi_video0.service has failed
support
t@backlight:acpi_video0.service has finished with a failure.
result is failed.
light[920]: Failed to get backlight or LED device 'backlight:acpi_video1': No s>
Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video1.
-backlight@backlight:acpi_video1.service has failed
support
t@backlight:acpi_video1.service has finished with a failure.
result is failed.
:mod_hdcp_add_display_topology [amdgpu]] *ERROR* Failed to add display topology>
297]: Failed to set mode: Blocked through rfkill (0x12)
][1728]: gkr-pam: unable to locate daemon control file
297]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address alre>
297]: RFCOMM server failed for :1.65/Profile/HSPHSProfile/00001108-0000-1000-80>
hdog: watchdog0: watchdog did not stop!
~
ESCOC
. --
te to IOMMU perf counter.
o mode : 0
ED device 'backlight:acpi_video0': No such device
ht Brightness of backlight:acpi_video0.
has failed
shed with a failure.
ED device 'backlight:acpi_video1': No such device
ht Brightness of backlight:acpi_video1.
has failed
shed with a failure.
*ERROR* Failed to add display topology, DTM TA is not initialized.
h rfkill (0x12)
n control file
oice gateway: rfcomm_bind: Address already in use (98)
file/HSPHSProfile/00001108-0000-1000-8000-00805f9b34fb: rfcomm_bind: Address al>
~
ESCOD
PST, end at Tue 2020-09-01 21:11:27 PST. --
0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
pci_acp3x 0000:05:00.5: Invalid ACP audio mode : 0
light[919]: Failed to get backlight or LED device 'backlight:acpi_video0': No s>
Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
-backlight@backlight:acpi_video0.service has failed
support
t@backlight:acpi_video0.service has finished with a failure.
result is failed.
light[920]: Failed to get backlight or LED device 'backlight:acpi_video1': No s>
Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video1.
-backlight@backlight:acpi_video1.service has failed
support
t@backlight:acpi_video1.service has finished with a failure.
result is failed.
:mod_hdcp_add_display_topology [amdgpu]] *ERROR* Failed to add display topology>
297]: Failed to set mode: Blocked through rfkill (0x12)
][1728]: gkr-pam: unable to locate daemon control file
297]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address alre>
297]: RFCOMM server failed for :1.65/Profile/HSPHSProfile/00001108-0000-1000-80>
hdog: watchdog0: watchdog did not stop!
~
ESCOD
-- Logs begin at Mon 2020-08-31 18:48:20 PST, end at Tue 2020-09-01 21:11:27 PS>
Aug 31 18:48:20 magicpotion kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/wr>
Aug 31 18:48:20 magicpotion kernel: snd_pci_acp3x 0000:05:00.5: Invalid ACP aud>
Aug 31 18:48:22 magicpotion systemd-backlight[919]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has fin>
░░
░░ The job identifier is 463 and the job result is failed.
Aug 31 18:48:22 magicpotion systemd-backlight[920]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video1.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video1.service has fin>
░░
░░ The job identifier is 469 and the job result is failed.
Aug 31 18:48:24 magicpotion kernel: [drm:mod_hdcp_add_display_topology [amdgpu]>
Aug 31 18:48:24 magicpotion bluetoothd[1297]: Failed to set mode: Blocked throu>
Aug 31 18:48:28 magicpotion gdm-password][1728]: gkr-pam: unable to locate daem>
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for Headset >
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for :1.65/Pr>
Aug 31 18:48:55 magicpotion kernel: watchdog: watchdog0: watchdog did not stop!
~
ESCOD
-- Logs begin at Mon 2020-08-31 18:48:20 PST, end at Tue 2020-09-01 21:11:27 PS>
Aug 31 18:48:20 magicpotion kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/wr>
Aug 31 18:48:20 magicpotion kernel: snd_pci_acp3x 0000:05:00.5: Invalid ACP aud>
Aug 31 18:48:22 magicpotion systemd-backlight[919]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has fin>
░░
░░ The job identifier is 463 and the job result is failed.
Aug 31 18:48:22 magicpotion systemd-backlight[920]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video1.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video1.service has fin>
░░
░░ The job identifier is 469 and the job result is failed.
Aug 31 18:48:24 magicpotion kernel: [drm:mod_hdcp_add_display_topology [amdgpu]>
Aug 31 18:48:24 magicpotion bluetoothd[1297]: Failed to set mode: Blocked throu>
Aug 31 18:48:28 magicpotion gdm-password][1728]: gkr-pam: unable to locate daem>
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for Headset >
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for :1.65/Pr>
Aug 31 18:48:55 magicpotion kernel: watchdog: watchdog0: watchdog did not stop!
~
ESCOD
-- Logs begin at Mon 2020-08-31 18:48:20 PST, end at Tue 2020-09-01 21:11:27 PS>
Aug 31 18:48:20 magicpotion kernel: pci 0000:00:00.2: AMD-Vi: Unable to read/wr>
Aug 31 18:48:20 magicpotion kernel: snd_pci_acp3x 0000:05:00.5: Invalid ACP aud>
Aug 31 18:48:22 magicpotion systemd-backlight[919]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video0.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video0.service has fin>
░░
░░ The job identifier is 463 and the job result is failed.
Aug 31 18:48:22 magicpotion systemd-backlight[920]: Failed to get backlight or >
Aug 31 18:48:22 magicpotion systemd[1]: Failed to start Load/Save Screen Backli>
░░ Subject: A start job for unit systemd-backlight@backlight:acpi_video1.servic>
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░
░░ A start job for unit systemd-backlight@backlight:acpi_video1.service has fin>
░░
░░ The job identifier is 469 and the job result is failed.
Aug 31 18:48:24 magicpotion kernel: [drm:mod_hdcp_add_display_topology [amdgpu]>
Aug 31 18:48:24 magicpotion bluetoothd[1297]: Failed to set mode: Blocked throu>
Aug 31 18:48:28 magicpotion gdm-password][1728]: gkr-pam: unable to locate daem>
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for Headset >
Aug 31 18:48:30 magicpotion bluetoothd[1297]: RFCOMM server failed for :1.65/Pr>
Aug 31 18:48:55 magicpotion kernel: watchdog: watchdog0: watchdog did not stop!
cat /var/log/Xorg.0.log
[ 201.686] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 201.686]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 201.686] Build Operating System: Linux Manjaro Linux
[ 201.687] Current Operating System: Linux magic-potion 5.7.17-2-MANJARO #1 SMP PREEMPT Sat Aug 22 14:58:17 UTC 2020 x86_64
[ 201.687] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.7-x86_64 root=UUID=260c331a-ce37-421e-b75f-696a4df21616 rw quiet resume=UUID=8b3f4d8e-89ca-47ef-800c-08fce76aa125 udev.log_priority=3
[ 201.687] Build Date: 01 August 2020 07:25:56AM
[ 201.687]
[ 201.687] Current version of pixman: 0.40.0
[ 201.687] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 201.687] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 201.687] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 1 21:05:18 2020
[ 201.688] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 201.688] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 201.688] (==) ServerLayout "layout"
[ 201.688] (==) No screen section available. Using defaults.
[ 201.688] (**) |-->Screen "Default Screen Section" (0)
[ 201.688] (**) | |-->Monitor "<default monitor>"
[ 201.688] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 201.688] (==) Automatically adding devices
[ 201.688] (==) Automatically enabling devices
[ 201.688] (==) Automatically adding GPU devices
[ 201.688] (==) Automatically binding GPU devices
[ 201.688] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 201.688] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 201.688] Entry deleted from font path.
[ 201.688] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 201.688] Entry deleted from font path.
[ 201.688] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[ 201.688] Entry deleted from font path.
[ 201.688] (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[ 201.688] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[ 201.688] Entry deleted from font path.
[ 201.688] (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[ 201.688] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF
[ 201.688] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 201.688] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 201.688] (II) Module ABI versions:
[ 201.688] X.Org ANSI C Emulation: 0.4
[ 201.688] X.Org Video Driver: 24.1
[ 201.688] X.Org XInput driver : 24.1
[ 201.688] X.Org Server Extension : 10.0
[ 201.690] (++) using VT number 6
[ 201.695] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 201.696] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 201.697] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 201.698] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 201.700] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[ 201.702] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 201.702] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 202.020] (--) PCI: (1@0:0:0) 10de:1f95:17aa:3a3e rev 161, Mem @ 0xc1000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 202.020] (--) PCI:*(5@0:0:0) 1002:1636:17aa:3a3e rev 198, Mem @ 0xb0000000/268435456, 0xc0000000/2097152, 0xc2500000/524288, I/O @ 0x00001000/256, BIOS @ 0x????????/131072
[ 202.020] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 202.021] (II) LoadModule: "glx"
[ 202.021] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 202.023] (II) Module glx: vendor="X.Org Foundation"
[ 202.023] compiled for 1.20.8, module version = 1.0.0
[ 202.023] ABI class: X.Org Server Extension, version 10.0
[ 202.023] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 202.023] loading driver: amdgpu
[ 202.023] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 202.023] loading driver: amdgpu
[ 202.023] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 202.023] loading driver: nvidia
[ 202.023] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 202.023] loading driver: nvidia
[ 202.023] (==) Matched amdgpu as autoconfigured driver 0
[ 202.023] (==) Matched ati as autoconfigured driver 1
[ 202.023] (==) Matched nvidia as autoconfigured driver 2
[ 202.023] (==) Matched nouveau as autoconfigured driver 3
[ 202.023] (==) Matched nv as autoconfigured driver 4
[ 202.023] (==) Matched modesetting as autoconfigured driver 5
[ 202.023] (==) Matched fbdev as autoconfigured driver 6
[ 202.023] (==) Matched vesa as autoconfigured driver 7
[ 202.023] (==) Assigned the driver to the xf86ConfigLayout
[ 202.023] (II) LoadModule: "amdgpu"
[ 202.023] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 202.028] (II) Module amdgpu: vendor="X.Org Foundation"
[ 202.028] compiled for 1.20.8, module version = 19.1.0
[ 202.028] Module class: X.Org Video Driver
[ 202.028] ABI class: X.Org Video Driver, version 24.1
[ 202.028] (II) LoadModule: "ati"
[ 202.028] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 202.028] (II) Module ati: vendor="X.Org Foundation"
[ 202.028] compiled for 1.20.8, module version = 19.1.0
[ 202.028] Module class: X.Org Video Driver
[ 202.028] ABI class: X.Org Video Driver, version 24.1
[ 202.028] (II) LoadModule: "nvidia"
[ 202.029] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 202.029] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 202.029] compiled for 1.6.99.901, module version = 1.0.0
[ 202.029] Module class: X.Org Video Driver
[ 202.029] (II) LoadModule: "nouveau"
[ 202.029] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 202.030] (II) Module nouveau: vendor="X.Org Foundation"
[ 202.030] compiled for 1.20.8, module version = 1.0.16
[ 202.030] Module class: X.Org Video Driver
[ 202.030] ABI class: X.Org Video Driver, version 24.1
[ 202.030] (II) LoadModule: "nv"
[ 202.030] (WW) Warning, couldn't open module nv
[ 202.030] (EE) Failed to load module "nv" (module does not exist, 0)
[ 202.030] (II) LoadModule: "modesetting"
[ 202.030] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 202.031] (II) Module modesetting: vendor="X.Org Foundation"
[ 202.031] compiled for 1.20.8, module version = 1.20.8
[ 202.031] Module class: X.Org Video Driver
[ 202.031] ABI class: X.Org Video Driver, version 24.1
[ 202.031] (II) LoadModule: "fbdev"
[ 202.031] (WW) Warning, couldn't open module fbdev
[ 202.031] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 202.031] (II) LoadModule: "vesa"
[ 202.032] (WW) Warning, couldn't open module vesa
[ 202.032] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 202.032] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 202.032] (II) NVIDIA dlloader X Driver 450.66 Wed Aug 12 19:44:12 UTC 2020
[ 202.032] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 202.032] (II) NOUVEAU driver
[ 202.032] (II) NOUVEAU driver for NVIDIA chipset families :
[ 202.032] RIVA TNT (NV04)
[ 202.032] RIVA TNT2 (NV05)
[ 202.032] GeForce 256 (NV10)
[ 202.032] GeForce 2 (NV11, NV15)
[ 202.032] GeForce 4MX (NV17, NV18)
[ 202.032] GeForce 3 (NV20)
[ 202.032] GeForce 4Ti (NV25, NV28)
[ 202.032] GeForce FX (NV3x)
[ 202.032] GeForce 6 (NV4x)
[ 202.032] GeForce 7 (G7x)
[ 202.032] GeForce 8 (G8x)
[ 202.032] GeForce 9 (G9x)
[ 202.032] GeForce GTX 2xx/3xx (GT2xx)
[ 202.032] GeForce GTX 4xx/5xx (GFxxx)
[ 202.032] GeForce GTX 6xx/7xx (GKxxx)
[ 202.032] GeForce GTX 9xx (GMxxx)
[ 202.032] GeForce GTX 10xx (GPxxx)
[ 202.032] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 202.035] (WW) Falling back to old probe method for modesetting
[ 202.035] (II) systemd-logind: releasing fd for 226:0
[ 202.037] (II) Loading sub module "fb"
[ 202.037] (II) LoadModule: "fb"
[ 202.037] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 202.037] (II) Module fb: vendor="X.Org Foundation"
[ 202.037] compiled for 1.20.8, module version = 1.0.0
[ 202.037] ABI class: X.Org ANSI C Emulation, version 0.4
[ 202.037] (II) Loading sub module "wfb"
[ 202.038] (II) LoadModule: "wfb"
[ 202.038] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 202.038] (II) Module wfb: vendor="X.Org Foundation"
[ 202.038] compiled for 1.20.8, module version = 1.0.0
[ 202.038] ABI class: X.Org ANSI C Emulation, version 0.4
[ 202.038] (II) Loading sub module "ramdac"
[ 202.038] (II) LoadModule: "ramdac"
[ 202.038] (II) Module "ramdac" already built-in
[ 202.039] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 202.039] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 202.039] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 202.039] (==) AMDGPU(0): Default visual is TrueColor
[ 202.039] (==) AMDGPU(0): RGB weight 888
[ 202.039] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 202.039] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID = 0x1636)
[ 202.039] (II) Loading sub module "fb"
[ 202.039] (II) LoadModule: "fb"
[ 202.039] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 202.039] (II) Module fb: vendor="X.Org Foundation"
[ 202.039] compiled for 1.20.8, module version = 1.0.0
[ 202.039] ABI class: X.Org ANSI C Emulation, version 0.4
[ 202.039] (II) Loading sub module "dri2"
[ 202.039] (II) LoadModule: "dri2"
[ 202.039] (II) Module "dri2" already built-in
[ 202.172] (II) Loading sub module "glamoregl"
[ 202.172] (II) LoadModule: "glamoregl"
[ 202.173] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 202.179] (II) Module glamoregl: vendor="X.Org Foundation"
[ 202.179] compiled for 1.20.8, module version = 1.0.1
[ 202.179] ABI class: X.Org ANSI C Emulation, version 0.4
[ 202.217] (II) AMDGPU(0): glamor X acceleration enabled on AMD RENOIR (DRM 3.37.0, 5.7.17-2-MANJARO, LLVM 10.0.1)
[ 202.218] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 202.218] (==) AMDGPU(0): TearFree property default: auto
[ 202.218] (==) AMDGPU(0): VariableRefresh: disabled
[ 202.218] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 202.218] (II) AMDGPU(0): Output eDP has no monitor section
[ 202.222] (II) AMDGPU(0): EDID for output eDP
[ 202.222] (II) AMDGPU(0): Manufacturer: AUO Model: d1ed Serial#: 0
[ 202.222] (II) AMDGPU(0): Year: 2019 Week: 34
[ 202.222] (II) AMDGPU(0): EDID Version: 1.4
[ 202.222] (II) AMDGPU(0): Digital Display Input
[ 202.222] (II) AMDGPU(0): 8 bits per channel
[ 202.222] (II) AMDGPU(0): Digital interface is DisplayPort
[ 202.222] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 202.222] (II) AMDGPU(0): Gamma: 2.20
[ 202.222] (II) AMDGPU(0): No DPMS capabilities specified
[ 202.222] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 202.222] (II) AMDGPU(0): First detailed timing is preferred mode
[ 202.222] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 202.222] (II) AMDGPU(0): Display is continuous-frequency
[ 202.222] (II) AMDGPU(0): redX: 0.560 redY: 0.340 greenX: 0.350 greenY: 0.570
[ 202.222] (II) AMDGPU(0): blueX: 0.160 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 202.222] (II) AMDGPU(0): Manufacturer's mask: 0
[ 202.222] (II) AMDGPU(0): Supported detailed timing:
[ 202.222] (II) AMDGPU(0): clock: 285.0 MHz Image Size: 344 x 193 mm
[ 202.222] (II) AMDGPU(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2076 h_border: 0
[ 202.222] (II) AMDGPU(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1142 v_border: 0
[ 202.222] (II) AMDGPU(0): Unknown vendor-specific block f
[ 202.222] (II) AMDGPU(0): Ranges: V min: 60 V max: 120 Hz, H min: 138 H max: 138 kHz, PixClock max 295 MHz
[ 202.222] (II) AMDGPU(0): B156HAN13.1
[ 202.222] (II) AMDGPU(0): EDID (in hex):
[ 202.222] (II) AMDGPU(0): 00ffffffffffff0006afedd100000000
[ 202.222] (II) AMDGPU(0): 221d0104a52213780348358f57599229
[ 202.222] (II) AMDGPU(0): 1e505400000001010101010101010101
[ 202.222] (II) AMDGPU(0): 010101010101546f809c70383e406c30
[ 202.222] (II) AMDGPU(0): aa0058c1100000180000000f00000000
[ 202.222] (II) AMDGPU(0): 00000000000000000020000000fd003c
[ 202.222] (II) AMDGPU(0): 788a8a1d010a202020202020000000fe
[ 202.222] (II) AMDGPU(0): 004231353648414e31332e31200a00a9
[ 202.222] (II) AMDGPU(0): Printing probed modes for output eDP
[ 202.222] (II) AMDGPU(0): Modeline "1920x1080"x120.2 285.00 1920 2028 2076 2076 1080 1090 1100 1142 -hsync -vsync (137.3 kHz eP)
[ 202.222] (II) AMDGPU(0): Modeline "1680x1050"x120.2 285.00 1680 2028 2076 2076 1050 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "1280x1024"x120.2 285.00 1280 2028 2076 2076 1024 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "1440x900"x120.2 285.00 1440 2028 2076 2076 900 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "1280x800"x120.2 285.00 1280 2028 2076 2076 800 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "1280x720"x120.2 285.00 1280 2028 2076 2076 720 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "1024x768"x120.2 285.00 1024 2028 2076 2076 768 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "800x600"x120.2 285.00 800 2028 2076 2076 600 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Modeline "640x480"x120.2 285.00 640 2028 2076 2076 480 1090 1100 1142 -hsync -vsync (137.3 kHz e)
[ 202.222] (II) AMDGPU(0): Output eDP connected
[ 202.222] (II) AMDGPU(0): Using exact sizes for initial modes
[ 202.222] (II) AMDGPU(0): Output eDP using initial mode 1920x1080 +0+0
[ 202.222] (II) AMDGPU(0): mem size init: gart size :bf7b6000 vram size: s:1e388000 visible:1e388000
[ 202.222] (==) AMDGPU(0): DPI set to (96, 96)
[ 202.222] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 202.222] (II) Loading sub module "ramdac"
[ 202.222] (II) LoadModule: "ramdac"
[ 202.222] (II) Module "ramdac" already built-in
[ 202.222] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[ 202.222] (==) NVIDIA(G0): RGB weight 888
[ 202.222] (==) NVIDIA(G0): Default visual is TrueColor
[ 202.222] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 202.223] (**) Option "AllowNVIDIAGpuScreens"
[ 202.223] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 202.223] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 202.223] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[ 202.223] (**) NVIDIA(G0): Enabling 2D acceleration
[ 202.223] (II) Loading sub module "glxserver_nvidia"
[ 202.223] (II) LoadModule: "glxserver_nvidia"
[ 202.223] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 202.248] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 202.248] compiled for 1.6.99.901, module version = 1.0.0
[ 202.248] Module class: X.Org Server Extension
[ 202.248] (II) NVIDIA GLX Module 450.66 Wed Aug 12 19:41:37 UTC 2020
[ 202.249] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 203.671] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 203.671] (--) NVIDIA(0): DFP-0
[ 203.671] (--) NVIDIA(0): DFP-1
[ 203.671] (--) NVIDIA(0): DFP-2
[ 203.671] (--) NVIDIA(0): DFP-3
[ 203.673] (II) NVIDIA(G0): NVIDIA GPU GeForce GTX 1650 Ti (TU117-A) at PCI:1:0:0 (GPU-0)
[ 203.673] (--) NVIDIA(G0): Memory: 4194304 kBytes
[ 203.673] (--) NVIDIA(G0): VideoBIOS: 90.17.4e.00.1c
[ 203.673] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[ 203.673] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 203.673] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 203.673] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 203.673] (--) NVIDIA(GPU-0):
[ 203.673] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 203.673] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 203.673] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 203.673] (--) NVIDIA(GPU-0):
[ 203.673] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 203.673] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 203.673] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 203.673] (--) NVIDIA(GPU-0):
[ 203.673] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 203.673] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 203.673] (--) NVIDIA(GPU-0): DFP-3: 2660.0 MHz maximum pixel clock
[ 203.673] (--) NVIDIA(GPU-0):
[ 203.674] (II) NVIDIA(G0): Validated MetaModes:
[ 203.674] (II) NVIDIA(G0): "NULL"
[ 203.674] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[ 203.674] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[ 203.674] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[ 203.674] (II) UnloadModule: "nouveau"
[ 203.674] (II) Unloading nouveau
[ 203.674] (II) UnloadModule: "modesetting"
[ 203.674] (II) Unloading modesetting
[ 203.675] (II) AMDGPU(0): [DRI2] Setup complete
[ 203.675] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 203.675] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 203.755] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[ 203.756] (II) AMDGPU(0): SYNC extension fences enabled
[ 203.756] (II) AMDGPU(0): Present extension enabled
[ 203.756] (==) AMDGPU(0): DRI3 enabled
[ 203.756] (==) AMDGPU(0): Backing store enabled
[ 203.756] (II) AMDGPU(0): Direct rendering enabled
[ 203.806] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 203.806] (II) AMDGPU(0): Acceleration enabled
[ 203.806] (==) AMDGPU(0): DPMS enabled
[ 203.806] (==) AMDGPU(0): Silken mouse disabled
[ 203.807] (II) AMDGPU(0): Set up textured video (glamor)
[ 203.820] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 203.820] (II) NVIDIA: access.
[ 203.835] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 203.835] (II) NVIDIA(G0): may not be running or the "AcpidSocketPath" X
[ 203.835] (II) NVIDIA(G0): configuration option may not be set correctly. When the
[ 203.835] (II) NVIDIA(G0): ACPI event daemon is available, the NVIDIA X driver will
[ 203.835] (II) NVIDIA(G0): try to use it to receive ACPI event notifications. For
[ 203.835] (II) NVIDIA(G0): details, please see the "ConnectToAcpid" and
[ 203.835] (II) NVIDIA(G0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 203.835] (II) NVIDIA(G0): Config Options in the README.
[ 203.861] (II) NVIDIA(G0): Setting mode "NULL"
[ 203.874] (==) NVIDIA(G0): Disabling shared memory pixmaps
[ 203.874] (==) NVIDIA(G0): Backing store enabled
[ 203.874] (==) NVIDIA(G0): Silken mouse disabled
[ 203.874] (==) NVIDIA(G0): DPMS enabled
[ 203.875] (II) Loading sub module "dri2"
[ 203.875] (II) LoadModule: "dri2"
[ 203.875] (II) Module "dri2" already built-in
[ 203.875] (II) NVIDIA(G0): [DRI2] Setup complete
[ 203.875] (II) NVIDIA(G0): [DRI2] VDPAU driver: nvidia
[ 203.875] (II) Initializing extension Generic Event Extension
[ 203.875] (II) Initializing extension SHAPE
[ 203.875] (II) Initializing extension MIT-SHM
[ 203.875] (II) Initializing extension XInputExtension
[ 203.875] (II) Initializing extension XTEST
[ 203.875] (II) Initializing extension BIG-REQUESTS
[ 203.875] (II) Initializing extension SYNC
[ 203.875] (II) Initializing extension XKEYBOARD
[ 203.875] (II) Initializing extension XC-MISC
[ 203.875] (II) Initializing extension SECURITY
[ 203.875] (II) Initializing extension XFIXES
[ 203.875] (II) Initializing extension RENDER
[ 203.875] (II) Initializing extension RANDR
[ 203.875] (II) Initializing extension COMPOSITE
[ 203.875] (II) Initializing extension DAMAGE
[ 203.875] (II) Initializing extension MIT-SCREEN-SAVER
[ 203.875] (II) Initializing extension DOUBLE-BUFFER
[ 203.875] (II) Initializing extension RECORD
[ 203.875] (II) Initializing extension DPMS
[ 203.875] (II) Initializing extension Present
[ 203.875] (II) Initializing extension DRI3
[ 203.875] (II) Initializing extension X-Resource
[ 203.875] (II) Initializing extension XVideo
[ 203.875] (II) Initializing extension XVideo-MotionCompensation
[ 203.875] (II) Initializing extension GLX
[ 203.875] (II) Initializing extension GLX
[ 203.875] (II) Indirect GLX disabled.
[ 203.881] (II) AIGLX: Loaded and initialized radeonsi
[ 203.881] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 203.881] (II) Initializing extension XFree86-VidModeExtension
[ 203.881] (II) Initializing extension XFree86-DGA
[ 203.881] (II) Initializing extension XFree86-DRI
[ 203.881] (II) Initializing extension DRI2
[ 203.881] (II) Initializing extension NV-GLX
[ 203.881] (II) Initializing extension NV-CONTROL
[ 203.883] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[ 203.965] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 203.965] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 203.965] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 203.965] (**) Power Button: Applying InputClass "system-keyboard"
[ 203.965] (II) LoadModule: "libinput"
[ 203.965] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 203.968] (II) Module libinput: vendor="X.Org Foundation"
[ 203.968] compiled for 1.20.8, module version = 0.30.0
[ 203.968] Module class: X.Org XInput Driver
[ 203.968] ABI class: X.Org XInput driver, version 24.1
[ 203.968] (II) Using input driver 'libinput' for 'Power Button'
[ 203.970] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 36 paused 0
[ 203.970] (**) Power Button: always reports core events
[ 203.970] (**) Option "Device" "/dev/input/event2"
[ 203.970] (**) Option "_source" "server/udev"
[ 203.975] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 203.975] (II) event2 - Power Button: device is a keyboard
[ 203.976] (II) event2 - Power Button: device removed
[ 203.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 203.976] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 203.976] (**) Option "xkb_model" "pc105"
[ 203.976] (**) Option "xkb_layout" "us"
[ 203.977] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 203.977] (II) event2 - Power Button: device is a keyboard
[ 203.977] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 203.977] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 203.977] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 203.977] (**) Video Bus: Applying InputClass "system-keyboard"
[ 203.977] (II) Using input driver 'libinput' for 'Video Bus'
[ 203.979] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 39 paused 0
[ 203.979] (**) Video Bus: always reports core events
[ 203.979] (**) Option "Device" "/dev/input/event3"
[ 203.979] (**) Option "_source" "server/udev"
[ 203.980] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 203.981] (II) event3 - Video Bus: device is a keyboard
[ 203.981] (II) event3 - Video Bus: device removed
[ 203.981] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3/event3"
[ 203.981] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 203.981] (**) Option "xkb_model" "pc105"
[ 203.981] (**) Option "xkb_layout" "us"
[ 203.982] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 203.982] (II) event3 - Video Bus: device is a keyboard
[ 203.983] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 203.983] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 203.983] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 203.983] (**) Video Bus: Applying InputClass "system-keyboard"
[ 203.983] (II) Using input driver 'libinput' for 'Video Bus'
[ 203.984] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 40 paused 0
[ 203.985] (**) Video Bus: always reports core events
[ 203.985] (**) Option "Device" "/dev/input/event4"
[ 203.985] (**) Option "_source" "server/udev"
[ 203.986] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 203.986] (II) event4 - Video Bus: device is a keyboard
[ 203.986] (II) event4 - Video Bus: device removed
[ 203.986] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/LNXVIDEO:01/input/input4/event4"
[ 203.986] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 203.986] (**) Option "xkb_model" "pc105"
[ 203.986] (**) Option "xkb_layout" "us"
[ 203.987] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 203.987] (II) event4 - Video Bus: device is a keyboard
[ 203.988] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 203.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 203.988] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 203.988] (**) Power Button: Applying InputClass "system-keyboard"
[ 203.988] (II) Using input driver 'libinput' for 'Power Button'
[ 203.990] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[ 203.990] (**) Power Button: always reports core events
[ 203.990] (**) Option "Device" "/dev/input/event1"
[ 203.990] (**) Option "_source" "server/udev"
[ 203.991] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 203.991] (II) event1 - Power Button: device is a keyboard
[ 203.991] (II) event1 - Power Button: device removed
[ 203.991] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 203.991] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 203.991] (**) Option "xkb_model" "pc105"
[ 203.991] (**) Option "xkb_layout" "us"
[ 203.992] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 203.992] (II) event1 - Power Button: device is a keyboard
[ 203.993] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 203.993] (II) No input driver specified, ignoring this device.
[ 203.993] (II) This device may have been added with another device file.
[ 203.994] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event13)
[ 203.994] (**) Integrated Camera: Integrated C: Applying InputClass "evdev keyboard catchall"
[ 203.994] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[ 203.994] (**) Integrated Camera: Integrated C: Applying InputClass "system-keyboard"
[ 203.994] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[ 203.995] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 42 paused 0
[ 203.995] (**) Integrated Camera: Integrated C: always reports core events
[ 203.995] (**) Option "Device" "/dev/input/event13"
[ 203.995] (**) Option "_source" "server/udev"
[ 203.997] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 203.997] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[ 203.997] (II) event13 - Integrated Camera: Integrated C: device removed
[ 203.997] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-3/1-3:1.0/input/input15/event13"
[ 203.997] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 10)
[ 203.997] (**) Option "xkb_model" "pc105"
[ 203.997] (**) Option "xkb_layout" "us"
[ 203.999] (II) event13 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 203.999] (II) event13 - Integrated Camera: Integrated C: device is a keyboard
[ 204.000] (II) config/udev: Adding input device Lenovo Lenovo Legion M300 RGB Gaming Mouse (/dev/input/event17)
[ 204.000] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 204.000] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 204.000] (II) Using input driver 'libinput' for 'Lenovo Lenovo Legion M300 RGB Gaming Mouse'
[ 204.001] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 43 paused 0
[ 204.001] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: always reports core events
[ 204.002] (**) Option "Device" "/dev/input/event17"
[ 204.002] (**) Option "_source" "server/udev"
[ 204.004] (II) event17 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: is tagged by udev as: Mouse
[ 204.004] (II) event17 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: device is a pointer
[ 204.004] (II) event17 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: device removed
[ 204.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.0/0003:17EF:60E4.0003/input/input19/event17"
[ 204.004] (II) XINPUT: Adding extended input device "Lenovo Lenovo Legion M300 RGB Gaming Mouse" (type: MOUSE, id 11)
[ 204.004] (**) Option "AccelerationScheme" "none"
[ 204.004] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: (accel) selected scheme none/0
[ 204.004] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: (accel) acceleration factor: 2.000
[ 204.004] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: (accel) acceleration threshold: 4
[ 204.006] (II) event17 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: is tagged by udev as: Mouse
[ 204.006] (II) event17 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: device is a pointer
[ 204.006] (II) config/udev: Adding input device Lenovo Lenovo Legion M300 RGB Gaming Mouse (/dev/input/mouse2)
[ 204.006] (II) No input driver specified, ignoring this device.
[ 204.006] (II) This device may have been added with another device file.
[ 204.007] (II) config/udev: Adding input device Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control (/dev/input/event18)
[ 204.007] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 204.007] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 204.007] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: Applying InputClass "system-keyboard"
[ 204.007] (II) Using input driver 'libinput' for 'Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control'
[ 204.009] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 44 paused 0
[ 204.009] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: always reports core events
[ 204.009] (**) Option "Device" "/dev/input/event18"
[ 204.009] (**) Option "_source" "server/udev"
[ 204.011] (II) event18 - Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 204.011] (II) event18 - Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: device is a keyboard
[ 204.012] (II) event18 - Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: device removed
[ 204.012] (II) libinput: Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: needs a virtual subdevice
[ 204.012] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.0/0003:17EF:60E4.0003/input/input20/event18"
[ 204.012] (II) XINPUT: Adding extended input device "Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control" (type: MOUSE, id 12)
[ 204.012] (**) Option "AccelerationScheme" "none"
[ 204.012] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: (accel) selected scheme none/0
[ 204.012] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: (accel) acceleration factor: 2.000
[ 204.012] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: (accel) acceleration threshold: 4
[ 204.013] (II) event18 - Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: is tagged by udev as: Keyboard
[ 204.013] (II) event18 - Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: device is a keyboard
[ 204.015] (II) config/udev: Adding input device Lenovo Lenovo Legion M300 RGB Gaming Mouse (/dev/input/event19)
[ 204.015] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[ 204.015] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 204.015] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: Applying InputClass "system-keyboard"
[ 204.015] (II) Using input driver 'libinput' for 'Lenovo Lenovo Legion M300 RGB Gaming Mouse'
[ 204.016] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 45 paused 0
[ 204.017] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse: always reports core events
[ 204.017] (**) Option "Device" "/dev/input/event19"
[ 204.017] (**) Option "_source" "server/udev"
[ 204.019] (II) event19 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: is tagged by udev as: Keyboard
[ 204.019] (II) event19 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: device is a keyboard
[ 204.019] (II) event19 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: device removed
[ 204.019] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.1/0003:17EF:60E4.0004/input/input21/event19"
[ 204.019] (II) XINPUT: Adding extended input device "Lenovo Lenovo Legion M300 RGB Gaming Mouse" (type: KEYBOARD, id 13)
[ 204.019] (**) Option "xkb_model" "pc105"
[ 204.019] (**) Option "xkb_layout" "us"
[ 204.021] (II) event19 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: is tagged by udev as: Keyboard
[ 204.021] (II) event19 - Lenovo Lenovo Legion M300 RGB Gaming Mouse: device is a keyboard
[ 204.022] (II) config/udev: Adding input device SEM USB Keyboard (/dev/input/event20)
[ 204.022] (**) SEM USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 204.022] (**) SEM USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 204.022] (**) SEM USB Keyboard: Applying InputClass "system-keyboard"
[ 204.022] (II) Using input driver 'libinput' for 'SEM USB Keyboard'
[ 204.023] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 46 paused 0
[ 204.023] (**) SEM USB Keyboard: always reports core events
[ 204.023] (**) Option "Device" "/dev/input/event20"
[ 204.023] (**) Option "_source" "server/udev"
[ 204.026] (II) event20 - SEM USB Keyboard: is tagged by udev as: Keyboard
[ 204.026] (II) event20 - SEM USB Keyboard: device is a keyboard
[ 204.026] (II) event20 - SEM USB Keyboard: device removed
[ 204.026] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.0/0003:1A2C:2124.0006/input/input22/event20"
[ 204.026] (II) XINPUT: Adding extended input device "SEM USB Keyboard" (type: KEYBOARD, id 14)
[ 204.026] (**) Option "xkb_model" "pc105"
[ 204.026] (**) Option "xkb_layout" "us"
[ 204.028] (II) event20 - SEM USB Keyboard: is tagged by udev as: Keyboard
[ 204.028] (II) event20 - SEM USB Keyboard: device is a keyboard
[ 204.029] (II) config/udev: Adding input device SEM USB Keyboard Consumer Control (/dev/input/event21)
[ 204.029] (**) SEM USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 204.029] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 204.029] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 204.029] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[ 204.031] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 47 paused 0
[ 204.031] (**) SEM USB Keyboard Consumer Control: always reports core events
[ 204.031] (**) Option "Device" "/dev/input/event21"
[ 204.031] (**) Option "_source" "server/udev"
[ 204.033] (II) event21 - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 204.033] (II) event21 - SEM USB Keyboard Consumer Control: device is a keyboard
[ 204.033] (II) event21 - SEM USB Keyboard Consumer Control: device removed
[ 204.033] (II) libinput: SEM USB Keyboard Consumer Control: needs a virtual subdevice
[ 204.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.1/0003:1A2C:2124.0007/input/input23/event21"
[ 204.033] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: MOUSE, id 15)
[ 204.033] (**) Option "AccelerationScheme" "none"
[ 204.033] (**) SEM USB Keyboard Consumer Control: (accel) selected scheme none/0
[ 204.033] (**) SEM USB Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 204.033] (**) SEM USB Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 204.035] (II) event21 - SEM USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 204.035] (II) event21 - SEM USB Keyboard Consumer Control: device is a keyboard
[ 204.036] (II) config/udev: Adding input device SEM USB Keyboard System Control (/dev/input/event22)
[ 204.036] (**) SEM USB Keyboard System Control: Applying InputClass "evdev keyboard catchall"
[ 204.036] (**) SEM USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 204.036] (**) SEM USB Keyboard System Control: Applying InputClass "system-keyboard"
[ 204.036] (II) Using input driver 'libinput' for 'SEM USB Keyboard System Control'
[ 204.037] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 48 paused 0
[ 204.037] (**) SEM USB Keyboard System Control: always reports core events
[ 204.038] (**) Option "Device" "/dev/input/event22"
[ 204.038] (**) Option "_source" "server/udev"
[ 204.040] (II) event22 - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[ 204.040] (II) event22 - SEM USB Keyboard System Control: device is a keyboard
[ 204.040] (II) event22 - SEM USB Keyboard System Control: device removed
[ 204.040] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.1/0003:1A2C:2124.0007/input/input24/event22"
[ 204.040] (II) XINPUT: Adding extended input device "SEM USB Keyboard System Control" (type: KEYBOARD, id 16)
[ 204.040] (**) Option "xkb_model" "pc105"
[ 204.040] (**) Option "xkb_layout" "us"
[ 204.042] (II) event22 - SEM USB Keyboard System Control: is tagged by udev as: Keyboard
[ 204.042] (II) event22 - SEM USB Keyboard System Control: device is a keyboard
[ 204.043] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Keyboard (/dev/input/event14)
[ 204.043] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "evdev keyboard catchall"
[ 204.043] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[ 204.043] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard"
[ 204.043] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[ 204.044] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 49 paused 0
[ 204.045] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[ 204.045] (**) Option "Device" "/dev/input/event14"
[ 204.045] (**) Option "_source" "server/udev"
[ 204.046] (II) event14 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[ 204.046] (II) event14 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[ 204.047] (II) event14 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed
[ 204.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-4/3-4:1.0/0003:048D:C100.0002/input/input16/event14"
[ 204.047] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: KEYBOARD, id 17)
[ 204.047] (**) Option "xkb_model" "pc105"
[ 204.047] (**) Option "xkb_layout" "us"
[ 204.048] (II) event14 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[ 204.049] (II) event14 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[ 204.049] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Consumer Control (/dev/input/event15)
[ 204.049] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 204.049] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 204.049] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: Applying InputClass "system-keyboard"
[ 204.049] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Consumer Control'
[ 204.051] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 50 paused 0
[ 204.051] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: always reports core events
[ 204.051] (**) Option "Device" "/dev/input/event15"
[ 204.051] (**) Option "_source" "server/udev"
[ 204.053] (II) event15 - ITE Tech. Inc. ITE Device(8910) Consumer Control: is tagged by udev as: Keyboard
[ 204.053] (II) event15 - ITE Tech. Inc. ITE Device(8910) Consumer Control: device is a keyboard
[ 204.053] (II) event15 - ITE Tech. Inc. ITE Device(8910) Consumer Control: device removed
[ 204.053] (II) libinput: ITE Tech. Inc. ITE Device(8910) Consumer Control: needs a virtual subdevice
[ 204.053] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-4/3-4:1.0/0003:048D:C100.0002/input/input17/event15"
[ 204.053] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Consumer Control" (type: MOUSE, id 18)
[ 204.054] (**) Option "AccelerationScheme" "none"
[ 204.054] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: (accel) selected scheme none/0
[ 204.054] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: (accel) acceleration factor: 2.000
[ 204.054] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: (accel) acceleration threshold: 4
[ 204.055] (II) event15 - ITE Tech. Inc. ITE Device(8910) Consumer Control: is tagged by udev as: Keyboard
[ 204.055] (II) event15 - ITE Tech. Inc. ITE Device(8910) Consumer Control: device is a keyboard
[ 204.056] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control (/dev/input/event16)
[ 204.056] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[ 204.056] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 204.056] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "system-keyboard"
[ 204.056] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Wireless Radio Control'
[ 204.058] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 51 paused 0
[ 204.058] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: always reports core events
[ 204.058] (**) Option "Device" "/dev/input/event16"
[ 204.058] (**) Option "_source" "server/udev"
[ 204.060] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[ 204.060] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[ 204.060] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed
[ 204.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-4/3-4:1.0/0003:048D:C100.0002/input/input18/event16"
[ 204.060] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Wireless Radio Control" (type: KEYBOARD, id 19)
[ 204.060] (**) Option "xkb_model" "pc105"
[ 204.060] (**) Option "xkb_layout" "us"
[ 204.062] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[ 204.062] (II) event16 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[ 204.062] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event10)
[ 204.062] (II) No input driver specified, ignoring this device.
[ 204.063] (II) This device may have been added with another device file.
[ 204.063] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 204.063] (II) No input driver specified, ignoring this device.
[ 204.063] (II) This device may have been added with another device file.
[ 204.063] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event9)
[ 204.063] (II) No input driver specified, ignoring this device.
[ 204.063] (II) This device may have been added with another device file.
[ 204.063] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event7)
[ 204.063] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 204.063] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 204.063] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 204.063] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 204.065] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 52 paused 0
[ 204.065] (**) Ideapad extra buttons: always reports core events
[ 204.065] (**) Option "Device" "/dev/input/event7"
[ 204.065] (**) Option "_source" "server/udev"
[ 204.067] (II) event7 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 204.067] (II) event7 - Ideapad extra buttons: device is a keyboard
[ 204.067] (II) event7 - Ideapad extra buttons: device removed
[ 204.067] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input7/event7"
[ 204.067] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 20)
[ 204.067] (**) Option "xkb_model" "pc105"
[ 204.067] (**) Option "xkb_layout" "us"
[ 204.068] (II) event7 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 204.068] (II) event7 - Ideapad extra buttons: device is a keyboard
[ 204.069] (II) config/udev: Adding input device MSFT0001:00 04F3:3140 Mouse (/dev/input/event11)
[ 204.069] (**) MSFT0001:00 04F3:3140 Mouse: Applying InputClass "evdev pointer catchall"
[ 204.069] (**) MSFT0001:00 04F3:3140 Mouse: Applying InputClass "libinput pointer catchall"
[ 204.069] (II) Using input driver 'libinput' for 'MSFT0001:00 04F3:3140 Mouse'
[ 204.071] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 53 paused 0
[ 204.071] (**) MSFT0001:00 04F3:3140 Mouse: always reports core events
[ 204.071] (**) Option "Device" "/dev/input/event11"
[ 204.071] (**) Option "_source" "server/udev"
[ 204.073] (II) event11 - MSFT0001:00 04F3:3140 Mouse: is tagged by udev as: Mouse Pointingstick
[ 204.073] (II) event11 - MSFT0001:00 04F3:3140 Mouse: device is a pointer
[ 204.074] (II) event11 - MSFT0001:00 04F3:3140 Mouse: device removed
[ 204.074] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-MSFT0001:00/0018:04F3:3140.0001/input/input13/event11"
[ 204.074] (II) XINPUT: Adding extended input device "MSFT0001:00 04F3:3140 Mouse" (type: MOUSE, id 21)
[ 204.075] (**) Option "AccelerationScheme" "none"
[ 204.075] (**) MSFT0001:00 04F3:3140 Mouse: (accel) selected scheme none/0
[ 204.075] (**) MSFT0001:00 04F3:3140 Mouse: (accel) acceleration factor: 2.000
[ 204.075] (**) MSFT0001:00 04F3:3140 Mouse: (accel) acceleration threshold: 4
[ 204.076] (II) event11 - MSFT0001:00 04F3:3140 Mouse: is tagged by udev as: Mouse Pointingstick
[ 204.076] (II) event11 - MSFT0001:00 04F3:3140 Mouse: device is a pointer
[ 204.077] (II) config/udev: Adding input device MSFT0001:00 04F3:3140 Mouse (/dev/input/mouse0)
[ 204.077] (II) No input driver specified, ignoring this device.
[ 204.077] (II) This device may have been added with another device file.
[ 204.078] (II) config/udev: Adding input device MSFT0001:00 04F3:3140 Touchpad (/dev/input/event12)
[ 204.078] (**) MSFT0001:00 04F3:3140 Touchpad: Applying InputClass "evdev touchpad catchall"
[ 204.078] (**) MSFT0001:00 04F3:3140 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 204.078] (II) Using input driver 'libinput' for 'MSFT0001:00 04F3:3140 Touchpad'
[ 204.080] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 54 paused 0
[ 204.080] (**) MSFT0001:00 04F3:3140 Touchpad: always reports core events
[ 204.080] (**) Option "Device" "/dev/input/event12"
[ 204.080] (**) Option "_source" "server/udev"
[ 204.081] (II) event12 - MSFT0001:00 04F3:3140 Touchpad: is tagged by udev as: Touchpad
[ 204.083] (II) event12 - MSFT0001:00 04F3:3140 Touchpad: device is a touchpad
[ 204.083] (II) event12 - MSFT0001:00 04F3:3140 Touchpad: device removed
[ 204.083] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-MSFT0001:00/0018:04F3:3140.0001/input/input14/event12"
[ 204.083] (II) XINPUT: Adding extended input device "MSFT0001:00 04F3:3140 Touchpad" (type: TOUCHPAD, id 22)
[ 204.084] (**) Option "AccelerationScheme" "none"
[ 204.084] (**) MSFT0001:00 04F3:3140 Touchpad: (accel) selected scheme none/0
[ 204.084] (**) MSFT0001:00 04F3:3140 Touchpad: (accel) acceleration factor: 2.000
[ 204.084] (**) MSFT0001:00 04F3:3140 Touchpad: (accel) acceleration threshold: 4
[ 204.085] (II) event12 - MSFT0001:00 04F3:3140 Touchpad: is tagged by udev as: Touchpad
[ 204.086] (II) event12 - MSFT0001:00 04F3:3140 Touchpad: device is a touchpad
[ 204.087] (II) config/udev: Adding input device MSFT0001:00 04F3:3140 Touchpad (/dev/input/mouse1)
[ 204.087] (II) No input driver specified, ignoring this device.
[ 204.087] (II) This device may have been added with another device file.
[ 204.087] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 204.087] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 204.087] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 204.087] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 204.087] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 204.090] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 55 paused 0
[ 204.090] (**) AT Translated Set 2 keyboard: always reports core events
[ 204.090] (**) Option "Device" "/dev/input/event5"
[ 204.090] (**) Option "_source" "server/udev"
[ 204.091] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 204.091] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 204.092] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 204.092] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 204.092] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 23)
[ 204.092] (**) Option "xkb_model" "pc105"
[ 204.092] (**) Option "xkb_layout" "us"
[ 204.093] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 204.093] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 204.095] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 204.095] (II) No input driver specified, ignoring this device.
[ 204.095] (II) This device may have been added with another device file.
[ 204.117] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 204.117] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 204.117] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: Applying InputClass "system-keyboard"
[ 204.117] (II) Using input driver 'libinput' for 'Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control'
[ 204.117] (II) systemd-logind: returning pre-existing fd for /dev/input/event18 13:82
[ 204.117] (**) Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: always reports core events
[ 204.117] (**) Option "Device" "/dev/input/event18"
[ 204.117] (**) Option "_source" "_driver/libinput"
[ 204.117] (II) libinput: Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control: is a virtual subdevice
[ 204.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2:1.0/0003:17EF:60E4.0003/input/input20/event18"
[ 204.117] (II) XINPUT: Adding extended input device "Lenovo Lenovo Legion M300 RGB Gaming Mouse Consumer Control" (type: KEYBOARD, id 24)
[ 204.117] (**) Option "xkb_model" "pc105"
[ 204.117] (**) Option "xkb_layout" "us"
[ 204.117] (**) SEM USB Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 204.117] (**) SEM USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 204.117] (**) SEM USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 204.117] (II) Using input driver 'libinput' for 'SEM USB Keyboard Consumer Control'
[ 204.117] (II) systemd-logind: returning pre-existing fd for /dev/input/event21 13:85
[ 204.117] (**) SEM USB Keyboard Consumer Control: always reports core events
[ 204.117] (**) Option "Device" "/dev/input/event21"
[ 204.117] (**) Option "_source" "_driver/libinput"
[ 204.117] (II) libinput: SEM USB Keyboard Consumer Control: is a virtual subdevice
[ 204.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-1/3-1.1/3-1.1.3/3-1.1.3:1.1/0003:1A2C:2124.0007/input/input23/event21"
[ 204.117] (II) XINPUT: Adding extended input device "SEM USB Keyboard Consumer Control" (type: KEYBOARD, id 25)
[ 204.117] (**) Option "xkb_model" "pc105"
[ 204.117] (**) Option "xkb_layout" "us"
[ 204.117] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: Applying InputClass "evdev keyboard catchall"
[ 204.117] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 204.118] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: Applying InputClass "system-keyboard"
[ 204.118] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Consumer Control'
[ 204.118] (II) systemd-logind: returning pre-existing fd for /dev/input/event15 13:79
[ 204.118] (**) ITE Tech. Inc. ITE Device(8910) Consumer Control: always reports core events
[ 204.118] (**) Option "Device" "/dev/input/event15"
[ 204.118] (**) Option "_source" "_driver/libinput"
[ 204.118] (II) libinput: ITE Tech. Inc. ITE Device(8910) Consumer Control: is a virtual subdevice
[ 204.118] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-4/3-4:1.0/0003:048D:C100.0002/input/input17/event15"
[ 204.118] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Consumer Control" (type: KEYBOARD, id 26)
[ 204.118] (**) Option "xkb_model" "pc105"
[ 204.118] (**) Option "xkb_layout" "us"
[ 204.697] (II) AMDGPU(0): EDID vendor "AUO", prod id 53741
[ 204.697] (II) AMDGPU(0): Using EDID range info for horizontal sync
[ 204.697] (II) AMDGPU(0): Using EDID range info for vertical refresh
[ 204.697] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 204.697] (II) AMDGPU(0): Modeline "1920x1080"x0.0 285.00 1920 2028 2076 2076 1080 1090 1100 1142 -hsync -vsync (137.3 kHz eP)
[ 204.698] (II) AMDGPU(0): EDID vendor "AUO", prod id 53741
[ 204.698] (II) AMDGPU(0): Using hsync ranges from config file
[ 204.698] (II) AMDGPU(0): Using vrefresh ranges from config file
[ 204.698] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 204.698] (II) AMDGPU(0): Modeline "1920x1080"x0.0 285.00 1920 2028 2076 2076 1080 1090 1100 1142 -hsync -vsync (137.3 kHz eP)
[ 204.698] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 204.698] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[ 204.698] (--) NVIDIA(GPU-0): DFP-0: 2660.0 MHz maximum pixel clock
[ 204.698] (--) NVIDIA(GPU-0):
[ 204.699] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 204.699] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 204.699] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 204.699] (--) NVIDIA(GPU-0):
[ 204.699] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 204.699] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 204.699] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 204.699] (--) NVIDIA(GPU-0):
[ 204.699] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 204.699] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[ 204.699] (--) NVIDIA(GPU-0): DFP-3: 2660.0 MHz maximum pixel clock
[ 204.699] (--) NVIDIA(GPU-0):
[ 669.342] (EE) event20 - SEM USB Keyboard: client bug: event processing lagging behind by 18ms, your system is too slow
[ 671.654] (EE) event20 - SEM USB Keyboard: client bug: event processing lagging behind by 30ms, your system is too slow
Now, this has been going on since I installed Manjaro Gnome about a week ago. I’ve tried downgrading the kernel to 5.4.60-2 LTS. For a time it seemed to work but it came back. I tried going to 5.8, again it seemed to work then the issue just comes back.
Can you post your /etc/fstab file?
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=260c331a-ce37-421e-b75f-696a4df21616 / ext4 defaults,noatime 0 1
UUID=8b3f4d8e-89ca-47ef-800c-08fce76aa125 swap swap defaults,noatime 0 2
Deleting default.target seemed to fix the problem.
Turns out the problems still happens. It’s just weird that sometimes it works sometimes it doesn’t.
Found a solution in a thread titled “[SOLVED] Gnome (GDM) wont auto start on boot” in an archlinux.org forum:
Solution was to Unlink /etc/systemd/system/display-manager.service and the again enabling gdm service with systemctl enable gdm.service.
hi, this is the same solution for the
“watchdog did not stop” message ? I have to press ctrl alt delete to make it work again.
And could u point a step by step guide for this solution? i don’t know where to begin with it.
thanks
- I removed default.target:
rm /etc/systemd/system/default.target
- I unlinked display-manager.service from gdm.service:
unlink /etc/systemd/system/display-manager.service
- I then enabled gdm.service:
systemctl enable gdm.service
In the thread that I mentioned ([SOLVED] Gnome (GDM) wont auto start on boot), user WonderWoofy stated that:
When you “enable” a service, systemctl parses the [Install] section of the systemd.service, and uses that information to determine what it will do. In the case of gdm.service (as well as other display managers), they are aliased to display-manager.service. When the graphical.target is enabled, or booted to, it pulls in the display-manager.service as a dependency (Wants=display-manager.service). So it looks for that service in the usual places and runs that, whatever it is. So it will find the “enabled” /etc/systemd/system/display-manager.service and run that. In this case it is a symlink that points to /usr/lib/systemd/system/gdm.service.
So what KaiKratz did was manually delete the symlink /etc/systemd/system/display-manager.service. Then he used systemctl to re-enable the gdm.service. Presumably, the symlink must have somehow been borked, or pointed to the wrong place. So recreating it allowed to to fix it and point to the correct destination.
Regarding the “watchdog did not stop message”, I assume you’re talking about the shutdown message? If that’s what you’re talking about, I masked the service with:
systemctl mask mkinitcpio-generate-shutdown-ramfs
Hope this helps. 
1 Like
Thanks for the detailed step by step.
I did first step and it says there is no such file or directory. So maybe my issue is a little bit different from the issue posted originally.
The thing is that sometimes boot up a blank screen and i have to press ctrl alt delete, to make it boot again properly.
And lately is mostly asking to choose Manjaro. On the GNU GRUB screen.
Thanks
Hmm it’s possible it could be something else. You could skip the first step if default.target is already gone.
1 Like
Alright , so with step 2 it says “permission denied”
That means you need to use sudo.
1 Like
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.