[SOLVED with installing rpi3 image] Modprobe: FATAL: Module fuse not found



Hi there I want Mount my external hard drive in my rpi3
But I get this message:

saeb@saeb-pi  ~  sudo mount /dev/sda1 ~/Mount/sda1
[sudo] password for saeb:
modprobe: FATAL: Module fuse not found in directory /lib/modules/4.14.66-1-MANJARO-ARM
fuse: device not found, try 'modprobe fuse' first

Let me try modprobe fuse

This message comes:

✘ saeb@saeb-pi  ~  sudo modprobe fuse
[sudo] password for saeb:
modprobe: FATAL: Module fuse not found in directory /lib/modules/4.14.66-1-MANJARO-ARM
 ✘ saeb@saeb-pi  ~ 

I updated my Manjaro right now and reboot that but before and after uodate I have that issue,

I installed ntfs-3g and fuse3

ity/btfs 2.18-4
    A bittorrent filesystem based on FUSE
 saeb@saeb-pi  ~  lsblk
sda           8:0    0 931.5G  0 disk
└─sda1        8:1    0 931.5G  0 part
sdb           8:16   0 465.8G  0 disk
└─sdb1        8:17   0 465.8G  0 part
mmcblk0     179:0    0  29.8G  0 disk
├─mmcblk0p1 179:1    0    94M  0 part
└─mmcblk0p2 179:2    0  29.7G  0 part /
 saeb@saeb-pi  ~ 


Like I said, I did that


is this service working from systemctl ?
sys-module-fuse.device loaded active plugged /sys/module/fuse



polkit-agent-helper-1: pam_authenticate failed: Authentication failure
Failed to enable unit: Access denied
✘ saeb@saeb-pi  ~  sudo !!
✘ saeb@saeb-pi  ~  sudo systemctl enable sys-fs-fuse-connections.mount
The unit files have no installation config (WantedBy, RequiredBy, Also, Alias
settings in the [Install] section, and DefaultInstance for template units).
This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:

  1. A unit may be statically enabled by being symlinked from another unit’s
    .wants/ or .requires/ directory.
  2. A unit’s purpose may be to act as a helper for some other unit which has
    a requirement dependency on it.
  3. A unit may be started when needed via activation (socket, path, timer,
    D-Bus, udev, scripted systemctl call, …).
  4. In case of template units, the unit is meant to be enabled with some
    instance name specified.
    saeb@saeb-pi  ~ 


Thanks, but it didn’t help. I have latest version of manjaro-arm kernel and reboot didint help


Do you have the kernel headers installed?
They might be needed for fuse.

saeb@saeb-pi  ~  pacman -Ss linux-raspberrypi-headers
core/linux-raspberrypi-headers 4.14.76-1 [installed]
    Header files and scripts for building modules for linux kernel - Raspberry Pi
 saeb@saeb-pi  ~ 

Can I install linux418 for my rpi3?


Is the OS recently installed or did you use an older install?


The rpi3 18.10 images are using 4.18 and will be on 4.19 if they update.
You seem to have used a rpi2 image.


Filesystem created: Sat Sep 1 15:39:40 2018

So I just need install for rpi3 image,
I’ll try that. Thx