[Solved] Video/Display Glitch on All Kernels above 4.14

Hello all. I've been experiencing an issue since I got this new computer a month ago. Some info first:

  • CPU - Ryzen 2600 & stock Wraith cooler (3.9GHz all cores @ 1.29V, stock P-states)
  • M/B - ASRock B450 Pro 4
  • RAM - 16GB Corsair Venegance LPX 3200MHz C16 (Tightened timings @ 14-15-15-15-34, stock voltage)
  • GPU - Gigabyte Aorus AMD Radeon RX570 4GB
  • Display - Acer SA270 Monitor via 4K-compatible HDMI Cable (unsure which HDMI version for cable)

The only way to get this monitor to work was with the 4K-compatible HDMI cable. The other cable i have just would not play well with this monitor.

On Manjaro XFCE 17.1.12 with free drivers as far as i know, and with any Kernel above 4.14 LTS including RT Kernels, weird video glitches are encountered. This was with the video card at stock settings, and display refresh rates of 75Hz, 60Hz, 59.9Hz and 50Hz.

On Kernel 4.14 LTS, with the GPU manually overclocked at 9% above stock (1395MHz according to "cat /sys/class/drm/card0/device/pp_dpm_sclk"), the glitches happen with the display at 75Hz refresh rate. Only at 60Hz does the glitch not seem to happen.

Hoping that things might improve with Manjaro XFCE 18.0, i installed this last night with free drivers as far as i know. However, the same issue persists with Kernel 4.19 LTS. I did a Timeshift restore, which also gave back Kernel 4.14 LTS, and during the restore process, when text was scrolling very fast on screen, glitches were also noticed.

Here are 3 videos shot of the glitches. Sorry folks, was unable to embed the videos from BitChute into the reply.

The first is right after a fresh install of Manjaro XFCE 18.0 during window dragging and moving (glitch happens at both slow and fast dragging and moving speeds).

The second video was shot during Timeshift restore.

The last video was shot with Firefox open, and while opening YouTube.

All 3 videos are on Kernel 4.19 LTS with GPU at stock speed (no overclock) and display at 60Hz refresh rate.

Screenshots from each video showing the glitches:

Once the computer had rebooted back into Kernel 4.19 LTS after Timeshift restore, i tried different refresh rates of 75, 60, 59.9 and 50Hz. Glitches on all of them. Am now booted up on Kernel 4.14 LTS with GPU overclocked to 1395MHz at 60Hz refresh rate, and so far no glitches.

Any suggestions on how to overcome this display glitch issue would be most appreciated. I'd like to move up to a much newer kernel because the CPU temperature display error on Kernel 4.14 (Ryzen CPU) is driving my OCD nuts.

this seems like more than im capable of but have a look at this so you know what info to provide those that can help you, maybe it also gives you all the info you need to fix yourself?

Thank you for the info. Here are some of the outputs (edit: on 4.14 LTS):

$ inxi -Fxxxz

System:
  Kernel: 4.14.81-1-MANJARO x86_64 bits: 64 
  compiler: gcc v: 8.2.1 Desktop: N/A wm: xfwm4 dm: LightDM 1.28.0 
  Distro: Manjaro Linux 
Machine:
  Type: Desktop Mobo: ASRock model: B450 Pro4 serial: <filter> 
  UEFI [Legacy]: American Megatrends v: P1.30 date: 07/04/2018 
Battery:
  Device-1: hidpp_battery_0 model: Logitech K520 serial: <filter> 
  charge: 70% (should be ignored) rechargeable: yes status: Discharging 
  Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M325 
  serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
  status: Discharging 
CPU:
  Topology: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ 
  rev: 2 L2 cache: 3072 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 93466 
  Speed: 1843 MHz min/max: 1550/3900 MHz boost: enabled Core speeds (MHz): 
  1: 1843 2: 1973 3: 1533 4: 2216 5: 1971 6: 1402 7: 1409 8: 1520 9: 3444 
  10: 3879 11: 1609 12: 1552 
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X] 
  vendor: Gigabyte driver: amdgpu v: kernel bus ID: 26:00.0 
  chip ID: 1002:67df 
  Display: x11 server: X.org 1.20.3 driver: amdgpu,ati unloaded: modesetting 
  alternate: fbdev,vesa resolution: <xdpyinfo missing> 
  OpenGL: renderer: Radeon RX 570 Series (POLARIS10 DRM 3.19.0 
  4.14.81-1-MANJARO LLVM 7.0.0) 
  v: 4.5 Mesa 18.2.5 compat-v: 4.4 direct render: Yes 
Audio:
  Device-1: AMD Ellesmere [Radeon RX 580] vendor: Gigabyte 
  driver: snd_hda_intel v: kernel bus ID: 26:00.1 chip ID: 1002:aaf0 
  Device-2: AMD Family 17h HD Audio vendor: ASRock driver: snd_hda_intel 
  v: kernel bus ID: 28:00.3 chip ID: 1022:1457 
  Device-3: C-Media CM106 Like Sound Device type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-6:5 chip ID: 0d8c:0102 
  Device-4: Blue Microphones Yeti Stereo Microphone type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-10:4 chip ID: b58e:9e84 
  serial: <filter> 
  Sound Server: ALSA v: k4.14.81-1-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASRock driver: r8168 v: 8.045.08-NAPI port: d000 bus ID: 25:00.0 
  chip ID: 10ec:8168 
  IF: enp37s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:
  Local Storage: total: 3.86 TiB used: 2.03 TiB (52.5%) 
  ID-1: /dev/sda vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB 
  speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC29 scheme: GPT 
  ID-2: /dev/sdb vendor: OCZ model: TRION150 size: 223.57 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: 12.2 scheme: GPT 
  ID-3: /dev/sdc vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB 
  speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC29 scheme: GPT 
Partition:
  ID-1: / size: 43.00 GiB used: 14.73 GiB (34.2%) fs: ext4 dev: /dev/sdb1 
  ID-2: /home size: 172.92 GiB used: 106.79 GiB (61.8%) fs: ext4 
  dev: /dev/sdb3 
  ID-3: swap-1 size: 2.93 GiB used: 3.2 MiB (0.1%) fs: swap dev: /dev/sdb2 
Sensors:
  System Temperatures: cpu: 87.1 C mobo: N/A gpu: amdgpu temp: 35 C 
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 743 
Info:
  Processes: 281 Uptime: 11h 35m Memory: 15.66 GiB used: 5.47 GiB (35.0%) 
  Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23 
  running in: xfce4-terminal inxi: 3.0.27

$ dmesg

[    0.000000] Linux version 4.14.81-1-MANJARO (builduser@development) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Tue Nov 13 22:12:35 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=43f68119-e94a-4d75-9145-c9f6cfe36844 rw quiet resume=UUID=a365dd42-bbe0-4f8a-b262-024a3d241626
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dae3cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dae3d000-0x00000000dc328fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc329000-0x00000000dc41dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc41e000-0x00000000dc7f4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc7f5000-0x00000000dd257fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd258000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Pro4, BIOS P1.30 07/04/2018
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Using PIT calibration value
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000420000000 aka 16896M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff953480097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x14063a000, 0x14063afff] PGTABLE
[    0.000000] BRK [0x14063b000, 0x14063bfff] PGTABLE
[    0.000000] BRK [0x14063c000, 0x14063cfff] PGTABLE
[    0.000000] BRK [0x14063d000, 0x14063dfff] PGTABLE
[    0.000000] BRK [0x14063e000, 0x14063efff] PGTABLE
[    0.000000] BRK [0x14063f000, 0x14063ffff] PGTABLE
[    0.000000] BRK [0x140640000, 0x140640fff] PGTABLE
[    0.000000] BRK [0x140641000, 0x140641fff] PGTABLE
[    0.000000] BRK [0x140642000, 0x140642fff] PGTABLE
[    0.000000] BRK [0x140643000, 0x140643fff] PGTABLE
[    0.000000] BRK [0x140644000, 0x140644fff] PGTABLE
[    0.000000] BRK [0x140645000, 0x140645fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36caf000-0x3764efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DC41E098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DC4249A0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170728/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000DC41E1E8 0067B4 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DC7DDE00 000040
[    0.000000] ACPI: APIC 0x00000000DC424AB8 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DC424B98 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DC424BE0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DC424C80 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DC42D918 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DC42F370 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DC42FF40 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DC42FF70 002C36 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DC432BA8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: AAFT 0x00000000DC432BE8 000294 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DC432E80 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DC432EB8 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DC432EE0 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x00000000DC432F28 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DC432FF8 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DC434A40 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: WSMT 0x00000000DC434B38 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009cfffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20a000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000dae3cfff]
[    0.000000]   node   0: [mem 0x00000000dc329000-0x00000000dc41dfff]
[    0.000000]   node   0: [mem 0x00000000dd258000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.000000] On node 0 totalpages: 4177100
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14055 pages used for memmap
[    0.000000]   DMA32 zone: 899504 pages, LIFO batch:31
[    0.000000]   Normal zone: 51150 pages used for memmap
[    0.000000]   Normal zone: 3273600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae3d000-0xdc328fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc41e000-0xdc7f4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc7f5000-0xdd257fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x4d3 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff95389ec00000 s134360 r8192 d29480 u262144
[    0.000000] pcpu-alloc: s134360 r8192 d29480 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4111810
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=43f68119-e94a-4d75-9145-c9f6cfe36844 rw quiet resume=UUID=a365dd42-bbe0-4f8a-b262-024a3d241626
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16344748K/16708400K available (10252K kernel code, 1171K rwdata, 2880K rodata, 1380K init, 956K bss, 363652K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 29542 entries in 116 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 8448, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 3892.755 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 7788.90 BogoMIPS (lpj=12975850)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170728
[    0.009949] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.009975] Security Framework initialized
[    0.009976] Yama: becoming mindful.
[    0.011667] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.012596] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012635] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.012664] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.012828] mce: CPU supports 23 MCE banks
[    0.012844] LVT offset 1 assigned for vector 0xf9
[    0.012902] LVT offset 2 assigned for vector 0xf4
[    0.012912] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.012912] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.012914] Spectre V2 : Mitigation: Full AMD retpoline
[    0.012914] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.012914] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.012915] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.016975] Freeing SMP alternatives memory: 24K
[    0.020057] smpboot: Max logical packages: 3
[    0.023335] Switched APIC routing to physical flat.
[    0.024090] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059999] smpboot: CPU0: AMD Ryzen 5 2600 Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.070007] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.070011] ... version:                0
[    0.070011] ... bit width:              48
[    0.070012] ... generic registers:      6
[    0.070012] ... value mask:             0000ffffffffffff
[    0.070013] ... max period:             00007fffffffffff
[    0.070013] ... fixed-purpose events:   0
[    0.070013] ... event mask:             000000000000003f
[    0.076671] Hierarchical SRCU implementation.
[    0.090081] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.096670] smp: Bringing up secondary CPUs ...
[    0.123345] x86: Booting SMP configuration:
[    0.123346] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.392151] smp: Brought up 1 node, 12 CPUs
[    0.392151] smpboot: Total of 12 processors activated (93463.87 BogoMIPS)
[    0.393430] devtmpfs: initialized
[    0.393430] x86/mm: Memory block size: 128MB
[    0.394077] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[    0.394077] PM: Registering ACPI NVS region [mem 0xdc41e000-0xdc7f4fff] (4026368 bytes)
[    0.394077] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.394077] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.394077] pinctrl core: initialized pinctrl subsystem
[    0.394077] RTC time: 12:55:28, date: 11/21/18
[    0.394077] NET: Registered protocol family 16
[    0.394077] cpuidle: using governor ladder
[    0.394077] cpuidle: using governor menu
[    0.394077] ACPI: bus type PCI registered
[    0.394077] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.394077] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.394077] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.394077] PCI: Using configuration type 1 for base access
[    0.394077] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.394077] mtrr: probably your BIOS does not setup all CPUs.
[    0.394077] mtrr: corrected configuration.
[    0.394077] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.394077] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.394077] ACPI: Added _OSI(Module Device)
[    0.394077] ACPI: Added _OSI(Processor Device)
[    0.394077] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.394077] ACPI: Added _OSI(Processor Aggregator Device)
[    0.394077] ACPI: Executed 2 blocks of module-level executable AML code
[    0.399462] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.401037] ACPI: Interpreter enabled
[    0.401048] ACPI: (supports S0 S3 S4 S5)
[    0.401048] ACPI: Using IOAPIC for interrupt routing
[    0.401216] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.401399] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.406135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.406137] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.406260] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.406266] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.406454] PCI host bridge to bus 0000:00
[    0.406456] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.406456] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.406457] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.406458] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.406459] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.406460] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.406461] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.406461] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.406463] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.406467] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.406524] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.406595] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.406646] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.406747] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.406810] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.406871] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.406917] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.407017] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.407083] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.407148] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.407195] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.407421] pci 0000:00:07.1: enabling Extended Tags
[    0.407495] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.407559] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.407605] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.407632] pci 0000:00:08.1: enabling Extended Tags
[    0.407706] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.407806] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.408003] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.408203] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.408240] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.408276] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.408311] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.408349] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.408384] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.408419] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.408455] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.408571] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.408591] pci 0000:03:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
[    0.408664] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.408716] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.408759] pci 0000:03:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
[    0.408765] pci 0000:03:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
[    0.408799] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.408838] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.408904] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.416688] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.416691] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.416693] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.416766] pci 0000:1d:00.0: [1022:43c7] type 01 class 0x060400
[    0.416844] pci 0000:1d:00.0: PME# supported from D3hot D3cold
[    0.416900] pci 0000:1d:01.0: [1022:43c7] type 01 class 0x060400
[    0.416977] pci 0000:1d:01.0: PME# supported from D3hot D3cold
[    0.417032] pci 0000:1d:04.0: [1022:43c7] type 01 class 0x060400
[    0.417109] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[    0.417161] pci 0000:1d:05.0: [1022:43c7] type 01 class 0x060400
[    0.417237] pci 0000:1d:05.0: PME# supported from D3hot D3cold
[    0.417291] pci 0000:1d:06.0: [1022:43c7] type 01 class 0x060400
[    0.417367] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[    0.417421] pci 0000:1d:07.0: [1022:43c7] type 01 class 0x060400
[    0.417498] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[    0.417562] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.417566] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.417569] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.417599] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.417636] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.417676] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.417713] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.417764] pci 0000:24:00.0: [1b21:0612] type 00 class 0x010601
[    0.417791] pci 0000:24:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.417803] pci 0000:24:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.417814] pci 0000:24:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.417826] pci 0000:24:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.417837] pci 0000:24:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.417849] pci 0000:24:00.0: reg 0x24: [mem 0xfe600000-0xfe6001ff]
[    0.426688] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.426693] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.426696] pci 0000:1d:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.426752] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
[    0.426792] pci 0000:25:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.426826] pci 0000:25:00.0: reg 0x18: [mem 0xfe504000-0xfe504fff 64bit]
[    0.426847] pci 0000:25:00.0: reg 0x20: [mem 0xfe500000-0xfe503fff 64bit]
[    0.426968] pci 0000:25:00.0: supports D1 D2
[    0.426969] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436704] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.436709] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.436712] pci 0000:1d:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.436808] pci 0000:26:00.0: [1002:67df] type 00 class 0x030000
[    0.436830] pci 0000:26:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.436838] pci 0000:26:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.436843] pci 0000:26:00.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.436849] pci 0000:26:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
[    0.436854] pci 0000:26:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
[    0.436903] pci 0000:26:00.0: supports D1 D2
[    0.436904] pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.436970] pci 0000:26:00.1: [1002:aaf0] type 00 class 0x040300
[    0.436987] pci 0000:26:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
[    0.437045] pci 0000:26:00.1: supports D1 D2
[    0.446688] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.446691] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.446693] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.446696] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.446763] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[    0.446792] pci 0000:27:00.0: enabling Extended Tags
[    0.446845] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[    0.446860] pci 0000:27:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
[    0.446869] pci 0000:27:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
[    0.446875] pci 0000:27:00.2: enabling Extended Tags
[    0.446930] pci 0000:27:00.3: [1022:145f] type 00 class 0x0c0330
[    0.446941] pci 0000:27:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
[    0.446958] pci 0000:27:00.3: enabling Extended Tags
[    0.446982] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[    0.447030] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.447033] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.447094] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[    0.447125] pci 0000:28:00.0: enabling Extended Tags
[    0.447177] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[    0.447203] pci 0000:28:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
[    0.447209] pci 0000:28:00.2: enabling Extended Tags
[    0.447234] pci 0000:28:00.2: PME# supported from D3hot D3cold
[    0.447269] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[    0.447279] pci 0000:28:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
[    0.447301] pci 0000:28:00.3: enabling Extended Tags
[    0.447324] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.447372] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.447376] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.447596] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.447634] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.447666] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.447708] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.447744] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.447774] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.447803] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.447833] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.448126] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.448126] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.448126] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.448126] vgaarb: loaded
[    0.448126] EDAC MC: Ver: 3.0.0
[    0.448126] PCI: Using ACPI for IRQ routing
[    0.450983] PCI: pci_cache_line_size set to 64 bytes
[    0.451039] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.451040] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.451041] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.451041] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.451042] e820: reserve RAM buffer [mem 0xdae3d000-0xdbffffff]
[    0.451042] e820: reserve RAM buffer [mem 0xdc41e000-0xdfffffff]
[    0.451043] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.451043] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.451090] NetLabel: Initializing
[    0.451090] NetLabel:  domain hash size = 128
[    0.451090] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.451099] NetLabel:  unlabeled traffic allowed by default
[    0.451112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.451112] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.452076] clocksource: Switched to clocksource hpet
[    0.455977] VFS: Disk quotas dquot_6.6.0
[    0.455991] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.456031] pnp: PnP ACPI init
[    0.456108] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.456112] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.456153] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.456155] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.456200] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.456315] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.456316] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.456317] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.456318] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.456320] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.456470] pnp 00:04: [dma 0 disabled]
[    0.456498] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.456643] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.456644] system 00:05: [io  0x040b] has been reserved
[    0.456645] system 00:05: [io  0x04d6] has been reserved
[    0.456646] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.456647] system 00:05: [io  0x0c14] has been reserved
[    0.456648] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.456648] system 00:05: [io  0x0c52] has been reserved
[    0.456649] system 00:05: [io  0x0c6c] has been reserved
[    0.456650] system 00:05: [io  0x0c6f] has been reserved
[    0.456651] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.456652] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.456653] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.456653] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.456654] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.456655] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.456656] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.456657] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.456658] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.456658] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.456660] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.456661] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.456662] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.456663] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.456664] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.456665] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.456666] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.456668] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.456929] pnp: PnP ACPI: found 6 devices
[    0.463156] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.463212] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.463221] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.463229] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.463238] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.463246] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.463248] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.463251] pci 0000:1d:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.463258] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.463259] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.463262] pci 0000:1d:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.463268] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.463270] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.463273] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.463278] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.463280] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.463281] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.463285] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.463286] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.463288] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.463290] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.463292] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.463294] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.463297] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.463299] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.463303] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.463304] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.463305] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.463306] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.463306] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.463307] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.463308] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.463309] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.463310] pci_bus 0000:03: resource 0 [io  0xd000-0xefff]
[    0.463311] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe7fffff]
[    0.463311] pci_bus 0000:1d: resource 0 [io  0xd000-0xefff]
[    0.463312] pci_bus 0000:1d: resource 1 [mem 0xfe500000-0xfe6fffff]
[    0.463313] pci_bus 0000:24: resource 0 [io  0xe000-0xefff]
[    0.463314] pci_bus 0000:24: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.463315] pci_bus 0000:25: resource 0 [io  0xd000-0xdfff]
[    0.463315] pci_bus 0000:25: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.463316] pci_bus 0000:26: resource 0 [io  0xf000-0xffff]
[    0.463317] pci_bus 0000:26: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.463318] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.463318] pci_bus 0000:27: resource 1 [mem 0xfe200000-0xfe4fffff]
[    0.463319] pci_bus 0000:28: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.463377] NET: Registered protocol family 2
[    0.463494] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.463631] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.463739] TCP: Hash tables configured (established 131072 bind 65536)
[    0.463772] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.463806] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.463862] NET: Registered protocol family 1
[    0.463976] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.464049] PCI: CLS 64 bytes, default 64
[    0.464069] Unpacking initramfs...
[    0.546314] Freeing initrd memory: 9856K
[    0.546331] AMD-Vi: IOMMU performance counters supported
[    0.546555] iommu: Adding device 0000:00:01.0 to group 0
[    0.546643] iommu: Adding device 0000:00:01.3 to group 1
[    0.546731] iommu: Adding device 0000:00:02.0 to group 2
[    0.546820] iommu: Adding device 0000:00:03.0 to group 3
[    0.546896] iommu: Adding device 0000:00:03.1 to group 4
[    0.546981] iommu: Adding device 0000:00:04.0 to group 5
[    0.547060] iommu: Adding device 0000:00:07.0 to group 6
[    0.547145] iommu: Adding device 0000:00:07.1 to group 7
[    0.547226] iommu: Adding device 0000:00:08.0 to group 8
[    0.547309] iommu: Adding device 0000:00:08.1 to group 9
[    0.547387] iommu: Adding device 0000:00:14.0 to group 10
[    0.547397] iommu: Adding device 0000:00:14.3 to group 10
[    0.547502] iommu: Adding device 0000:00:18.0 to group 11
[    0.547512] iommu: Adding device 0000:00:18.1 to group 11
[    0.547521] iommu: Adding device 0000:00:18.2 to group 11
[    0.547530] iommu: Adding device 0000:00:18.3 to group 11
[    0.547539] iommu: Adding device 0000:00:18.4 to group 11
[    0.547548] iommu: Adding device 0000:00:18.5 to group 11
[    0.547559] iommu: Adding device 0000:00:18.6 to group 11
[    0.547568] iommu: Adding device 0000:00:18.7 to group 11
[    0.547659] iommu: Adding device 0000:03:00.0 to group 12
[    0.547676] iommu: Adding device 0000:03:00.1 to group 12
[    0.547691] iommu: Adding device 0000:03:00.2 to group 12
[    0.547700] iommu: Adding device 0000:1d:00.0 to group 12
[    0.547708] iommu: Adding device 0000:1d:01.0 to group 12
[    0.547718] iommu: Adding device 0000:1d:04.0 to group 12
[    0.547726] iommu: Adding device 0000:1d:05.0 to group 12
[    0.547735] iommu: Adding device 0000:1d:06.0 to group 12
[    0.547743] iommu: Adding device 0000:1d:07.0 to group 12
[    0.547753] iommu: Adding device 0000:24:00.0 to group 12
[    0.547769] iommu: Adding device 0000:25:00.0 to group 12
[    0.547877] iommu: Adding device 0000:26:00.0 to group 13
[    0.547894] iommu: Using direct mapping for device 0000:26:00.0
[    0.547916] iommu: Adding device 0000:26:00.1 to group 13
[    0.547954] iommu: Adding device 0000:27:00.0 to group 14
[    0.548024] iommu: Adding device 0000:27:00.2 to group 15
[    0.548101] iommu: Adding device 0000:27:00.3 to group 16
[    0.548186] iommu: Adding device 0000:28:00.0 to group 17
[    0.548267] iommu: Adding device 0000:28:00.2 to group 18
[    0.548355] iommu: Adding device 0000:28:00.3 to group 19
[    0.548552] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.548552] AMD-Vi: Extended features (0xf77ef22294ada):
[    0.548553]  PPR NX GT IA GA PC GA_vAPIC
[    0.548555] AMD-Vi: Interrupt remapping enabled
[    0.548555] AMD-Vi: virtual APIC enabled
[    0.548647] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.549277] amd_uncore: AMD NB counters detected
[    0.549279] amd_uncore: AMD LLC counters detected
[    0.549685] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.549717] Scanning for low memory corruption every 60 seconds
[    0.550161] Initialise system trusted keyrings
[    0.550172] Key type blacklist registered
[    0.550217] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.550801] zbud: loaded
[    0.552438] Key type asymmetric registered
[    0.552444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.552487] io scheduler noop registered
[    0.552487] io scheduler deadline registered
[    0.552502] io scheduler cfq registered
[    0.552502] io scheduler mq-deadline registered
[    0.552503] io scheduler kyber registered
[    0.552515] io scheduler bfq registered
[    0.552528] io scheduler bfq-sq registered (default)
[    0.552529] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    0.552542] io scheduler bfq-mq registered
[    0.552542] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    0.554253] pcieport 0000:00:01.3: AER enabled with IRQ 26
[    0.554265] pcieport 0000:00:03.1: AER enabled with IRQ 27
[    0.554277] pcieport 0000:00:07.1: AER enabled with IRQ 28
[    0.554290] pcieport 0000:00:08.1: AER enabled with IRQ 30
[    0.554297] pcieport 0000:00:01.3: Signaling PME with IRQ 26
[    0.554306] pcieport 0000:00:03.1: Signaling PME with IRQ 27
[    0.554316] pcieport 0000:00:07.1: Signaling PME with IRQ 28
[    0.554328] pcieport 0000:00:08.1: Signaling PME with IRQ 30
[    0.554344] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.554344] vesafb: scrolling: redraw
[    0.554345] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.554352] vesafb: framebuffer at 0xe0000000, mapped to 0xffffb43942800000, using 8128k, total 8128k
[    0.572676] Console: switching to colour frame buffer device 240x67
[    0.590883] fb0: VESA VGA frame buffer device
[    0.590902] Monitor-Mwait will be used to enter C-1 state
[    0.599134] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.620082] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.621136] rtc_cmos 00:02: RTC can wake from S4
[    0.621345] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.621396] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.621635] ledtrig-cpu: registered to indicate activity on CPUs
[    0.621663] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.621809] NET: Registered protocol family 10
[    0.624153] Segment Routing with IPv6
[    0.624163] NET: Registered protocol family 17
[    0.624689] RAS: Correctable Errors collector initialized.
[    0.625507] microcode: CPU0: patch_level=0x08008206
[    0.625518] microcode: CPU1: patch_level=0x08008206
[    0.625532] microcode: CPU2: patch_level=0x08008206
[    0.625544] microcode: CPU3: patch_level=0x08008206
[    0.625545] microcode: CPU4: patch_level=0x08008206
[    0.625553] microcode: CPU5: patch_level=0x08008206
[    0.625565] microcode: CPU6: patch_level=0x08008206
[    0.625578] microcode: CPU7: patch_level=0x08008206
[    0.625588] microcode: CPU8: patch_level=0x08008206
[    0.625598] microcode: CPU9: patch_level=0x08008206
[    0.625611] microcode: CPU10: patch_level=0x08008206
[    0.625623] microcode: CPU11: patch_level=0x08008206
[    0.625652] microcode: Microcode Update Driver: v2.2.
[    0.625659] sched_clock: Marking stable (625647441, 0)->(857822780, -232175339)
[    0.625931] registered taskstats version 1
[    0.625939] Loading compiled-in X.509 certificates
[    0.625952] zswap: loaded using pool lzo/zbud
[    0.627705] Key type big_key registered
[    0.627973]   Magic number: 10:771:936
[    0.627995] acpi AMDI0010:05: hash matches
[    0.628090] rtc_cmos 00:02: setting system clock to 2018-11-21 12:55:28 UTC (1542804928)
[    0.861971] Freeing unused kernel memory: 1380K
[    0.876715] Write protecting the kernel read-only data: 16384k
[    0.877854] Freeing unused kernel memory: 2016K
[    0.879712] Freeing unused kernel memory: 1216K
[    0.925715] ACPI: bus type USB registered
[    0.925729] usbcore: registered new interface driver usbfs
[    0.925733] usbcore: registered new interface driver hub
[    0.925771] usbcore: registered new device driver usb
[    0.926735] SCSI subsystem initialized
[    0.928744] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.928748] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.929144] libata version 3.00 loaded.
[    0.981656] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
[    0.981907] hub 1-0:1.0: USB hub found
[    0.981919] hub 1-0:1.0: 10 ports detected
[    0.982112] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.982114] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.982116] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[    0.982141] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.982210] hub 2-0:1.0: USB hub found
[    0.982218] hub 2-0:1.0: 4 ports detected
[    0.982277] usb: port power management may be unreliable
[    0.982367] ahci 0000:03:00.1: version 3.0
[    0.982453] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    0.982456] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
[    0.982503] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    0.982535] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    0.982537] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.982560] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
[    0.982785] hub 3-0:1.0: USB hub found
[    0.982790] hub 3-0:1.0: 4 ports detected
[    0.982928] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    0.982931] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
[    0.982933] xhci_hcd 0000:27:00.3: Host supports USB 3.0  SuperSpeed
[    0.982944] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.983030] hub 4-0:1.0: USB hub found
[    0.983036] hub 4-0:1.0: 4 ports detected
[    0.983146] scsi host0: ahci
[    0.983348] scsi host1: ahci
[    0.983456] scsi host2: ahci
[    0.983571] scsi host3: ahci
[    0.983675] scsi host4: ahci
[    0.983778] scsi host5: ahci
[    0.983936] scsi host6: ahci
[    0.984067] scsi host7: ahci
[    0.984105] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 51
[    0.984107] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 51
[    0.984108] ata3: DUMMY
[    0.984108] ata4: DUMMY
[    0.984110] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 51
[    0.984111] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 51
[    0.984112] ata7: DUMMY
[    0.984114] ata8: DUMMY
[    0.984228] ahci 0000:24:00.0: SSS flag set, parallel bus scan disabled
[    0.984266] ahci 0000:24:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.984267] ahci 0000:24:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    0.984468] scsi host8: ahci
[    0.984546] scsi host9: ahci
[    0.984569] ata9: SATA max UDMA/133 abar m512@0xfe600000 port 0xfe600100 irq 60
[    0.984571] ata10: SATA max UDMA/133 abar m512@0xfe600000 port 0xfe600180 irq 60
[    0.984659] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.984660] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.984784] scsi host10: ahci
[    0.984807] ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 62
[    1.298437] ata1: SATA link down (SStatus 0 SControl 330)
[    1.298443] ata11: SATA link down (SStatus 0 SControl 300)
[    1.310405] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    1.310413] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.457101] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.457267] ata9.00: ATA-9: OCZ-TRION150, SAFZ12.2, max UDMA/133
[    1.457269] ata9.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.457506] ata9.00: configured for UDMA/133
[    1.463115] hub 3-2:1.0: USB hub found
[    1.463451] hub 3-2:1.0: 4 ports detected
[    1.573743] tsc: Refined TSC clocksource calibration: 3892.685 MHz
[    1.573751] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7038b8db878, max_idle_ns: 881590710692 ns
[    1.610007] ata2: SATA link down (SStatus 0 SControl 330)
[    1.657232] hidraw: raw HID events driver (C) Jiri Kosina
[    1.708028] usbcore: registered new interface driver usbhid
[    1.708029] usbhid: USB HID core driver
[    1.708999] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-5/input2
[    1.763352] usb 3-2.2: new full-speed USB device number 3 using xhci_hcd
[    1.776677] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.841105] input: Logitech K830 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input0
[    1.841139] logitech-hidpp-device 0003:046D:404C.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K830] on usb-0000:03:00.0-5:1
[    1.847067] input: Logitech K520 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input1
[    1.847103] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:03:00.0-5:2
[    1.861026] input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:400A.0006/input/input2
[    1.861053] logitech-hidpp-device 0003:046D:400A.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-5:3
[    2.080018] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.081133] ata5.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    2.081134] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.082003] ata5.00: configured for UDMA/133
[    2.082112] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    2.083072] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.083073] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    2.083088] sd 4:0:0:0: [sda] Write Protect is off
[    2.083089] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.083112] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.099610] input: USB Sound Device         as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.3/0003:0D8C:0102.0007/input/input3
[    2.130891]  sda: sda1 sda2
[    2.131227] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.153387] hid-generic 0003:0D8C:0102.0007: input,hidraw4: USB HID v1.00 Device [USB Sound Device        ] on usb-0000:03:00.0-6/input3
[    2.223351] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    2.393346] ata6: SATA link down (SStatus 0 SControl 330)
[    2.393495] scsi 8:0:0:0: Direct-Access     ATA      OCZ-TRION150     12.2 PQ: 0 ANSI: 5
[    2.393717] sd 8:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.393734] sd 8:0:0:0: [sdb] Write Protect is off
[    2.393735] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.393764] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.406731]  sdb: sdb1 sdb2 sdb3
[    2.407083] sd 8:0:0:0: [sdb] Attached SCSI disk
[    2.484339] random: fast init done
[    2.502228] input: Blue Microphones Yeti Stereo Microphone as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.3/0003:B58E:9E84.0008/input/input4
[    2.556763] hid-generic 0003:B58E:9E84.0008: input,hiddev1,hidraw5: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:03:00.0-10/input3
[    2.586787] clocksource: Switched to clocksource tsc
[    2.863338] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.864448] ata10.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    2.864449] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.865326] ata10.00: configured for UDMA/133
[    2.865392] scsi 9:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    2.865515] sd 9:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.865517] sd 9:0:0:0: [sdc] 4096-byte physical blocks
[    2.865526] sd 9:0:0:0: [sdc] Write Protect is off
[    2.865527] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.865542] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.914510]  sdc: sdc1 sdc2
[    2.914664] sd 9:0:0:0: [sdc] Attached SCSI disk
[    3.082832] PM: Starting manual resume from disk
[    3.083037] PM: Image not found (code -22)
[    3.170842] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.298005] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.307745] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.323584] systemd[1]: Detected architecture x86-64.
[    3.327267] systemd[1]: Set hostname to <xfceman>.
[    3.458244] random: systemd: uninitialized urandom read (16 bytes read)
[    3.458302] systemd[1]: Listening on Journal Socket.
[    3.458870] random: systemd: uninitialized urandom read (16 bytes read)
[    3.460134] systemd[1]: Starting Load Kernel Modules...
[    3.460148] random: systemd: uninitialized urandom read (16 bytes read)
[    3.460153] systemd[1]: Reached target Login Prompts.
[    3.460596] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.460648] systemd[1]: Listening on udev Kernel Socket.
[    3.460662] systemd[1]: Reached target Remote File Systems.
[    3.460842] systemd[1]: Created slice system-getty.slice.
[    3.471004] vboxdrv: loading out-of-tree module taints kernel.
[    3.474473] vboxdrv: Found 12 processor cores
[    3.493468] vboxdrv: TSC mode is Invariant, tentative frequency 3892682763 Hz
[    3.493469] vboxdrv: Successfully loaded version 5.2.22 (interface 0x00290001)
[    3.494174] VBoxNetAdp: Successfully started.
[    3.495195] VBoxNetFlt: Successfully started.
[    3.496075] VBoxPciLinuxInit
[    3.504901] vboxpci: IOMMU found
[    3.565066] systemd-journald[311]: Received request to flush runtime journal from PID 1
[    3.572924] systemd-journald[311]: File /var/log/journal/b2d91a2d0f22425ab22522a000850f26/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.628416] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    3.638182] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.666050] acpi_cpufreq: overriding BIOS provided _PSD data
[    3.668305] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    3.668315] ACPI: Power Button [PWRB]
[    3.668415] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    3.668655] ACPI: Power Button [PWRF]
[    3.690981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.723712] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.724962] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[    3.724979] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    3.724980] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    3.727895] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    3.727942] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
[    3.727945] sp5100_tco: I/O address 0x0cd6 already in use
[    3.732290] Linux agpgart interface v0.103
[    3.732679] AVX2 version of gcm_enc/dec engaged.
[    3.732680] AES CTR mode by8 optimization enabled
[    3.735141] ccp 0000:27:00.2: ccp enabled
[    3.735142] ccp 0000:27:00.2: enabled
[    3.744109] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    3.744114] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    3.944532] Adding 3071996k swap on /dev/sdb2.  Priority:-2 extents:1 across:3071996k SSDscFS
[    3.983787] r8168 0000:25:00.0 enp37s0: renamed from eth0
[    4.031485] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    4.031486] snd_hda_intel 0000:26:00.1: Force to non-snoop mode
[    4.050297] random: crng init done
[    4.050298] random: 7 urandom warning(s) missed due to ratelimiting
[    4.050966] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input8
[    4.051008] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input9
[    4.051047] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input10
[    4.051093] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input11
[    4.051151] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input12
[    4.051185] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input13
[    4.052696] fuse init (API version 7.26)
[    4.053749] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.053751] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.053752] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.053753] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.053754] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.053756] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.053757] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.053758] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.069244] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input14
[    4.069283] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input15
[    4.069320] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input16
[    4.069355] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input17
[    4.069422] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input18
[    4.090068] kvm: Nested Virtualization enabled
[    4.090073] kvm: Nested Paging enabled
[    4.090074] SVM: Virtual VMLOAD VMSAVE supported
[    4.090074] SVM: Virtual GIF supported
[    4.092923] MCE: In-kernel MCE decoding enabled.
[    4.095019] EDAC amd64: Node 0: DRAM ECC disabled.
[    4.095020] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    4.113436] mousedev: PS/2 mouse device common for all mice
[    4.129921] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.148173] Bluetooth: Core ver 2.22
[    4.148183] NET: Registered protocol family 31
[    4.148184] Bluetooth: HCI device and connection manager initialized
[    4.148186] Bluetooth: HCI socket layer initialized
[    4.148187] Bluetooth: L2CAP socket layer initialized
[    4.148191] Bluetooth: SCO socket layer initialized
[    4.162672] [drm] amdgpu kernel modesetting enabled.
[    4.165732] usbcore: registered new interface driver btusb
[    4.166807] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    4.187589] Found CRAT image with size=3024
[    4.187592] Parsing CRAT table with 1 nodes
[    4.187594] Found CU entry in CRAT table with proximity_domain=0 caps=0
[    4.187595] CU CPU: cores=12 id_base=0
[    4.187595] Found memory entry in CRAT table with proximity_domain=0
[    4.187596] Found memory entry in CRAT table with proximity_domain=0
[    4.187597] Found memory entry in CRAT table with proximity_domain=0
[    4.187598] Found cache entry in CRAT table with processor_id=0
[    4.187599] Found cache entry in CRAT table with processor_id=0
[    4.187600] Found cache entry in CRAT table with processor_id=0
[    4.187601] Found cache entry in CRAT table with processor_id=0
[    4.187602] Found cache entry in CRAT table with processor_id=2
[    4.187602] Found cache entry in CRAT table with processor_id=2
[    4.187603] Found cache entry in CRAT table with processor_id=2
[    4.187604] Found cache entry in CRAT table with processor_id=4
[    4.187604] Found cache entry in CRAT table with processor_id=4
[    4.187605] Found cache entry in CRAT table with processor_id=4
[    4.187606] Found cache entry in CRAT table with processor_id=8
[    4.187606] Found cache entry in CRAT table with processor_id=8
[    4.187607] Found cache entry in CRAT table with processor_id=8
[    4.187608] Found cache entry in CRAT table with processor_id=8
[    4.187608] Found cache entry in CRAT table with processor_id=10
[    4.187609] Found cache entry in CRAT table with processor_id=10
[    4.187610] Found cache entry in CRAT table with processor_id=10
[    4.187610] Found cache entry in CRAT table with processor_id=12
[    4.187611] Found cache entry in CRAT table with processor_id=12
[    4.187612] Found cache entry in CRAT table with processor_id=12
[    4.187612] Found TLB entry in CRAT table (not processing)
[    4.187613] Found TLB entry in CRAT table (not processing)
[    4.187613] Found TLB entry in CRAT table (not processing)
[    4.187614] Found TLB entry in CRAT table (not processing)
[    4.187615] Found TLB entry in CRAT table (not processing)
[    4.187615] Found TLB entry in CRAT table (not processing)
[    4.187616] Found TLB entry in CRAT table (not processing)
[    4.187616] Found TLB entry in CRAT table (not processing)
[    4.187617] Found TLB entry in CRAT table (not processing)
[    4.187617] Found TLB entry in CRAT table (not processing)
[    4.187618] Found TLB entry in CRAT table (not processing)
[    4.187618] Found TLB entry in CRAT table (not processing)
[    4.187619] Found TLB entry in CRAT table (not processing)
[    4.187619] Found TLB entry in CRAT table (not processing)
[    4.187620] Found TLB entry in CRAT table (not processing)
[    4.187620] Found TLB entry in CRAT table (not processing)
[    4.187621] Found TLB entry in CRAT table (not processing)
[    4.187621] Found TLB entry in CRAT table (not processing)
[    4.187622] Found TLB entry in CRAT table (not processing)
[    4.187622] Found TLB entry in CRAT table (not processing)
[    4.187623] Found TLB entry in CRAT table (not processing)
[    4.187623] Found TLB entry in CRAT table (not processing)
[    4.187624] Found TLB entry in CRAT table (not processing)
[    4.187624] Found TLB entry in CRAT table (not processing)
[    4.187625] Creating topology SYSFS entries
[    4.187648] Finished initializing topology ret=0
[    4.187681] kfd kfd: Initialized module
[    4.187927] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    4.187928] fb: switching to amdgpudrmfb from VESA VGA
[    4.187943] Console: switching to colour dummy device 80x25
[    4.188141] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F0 0xEF).
[    4.188149] [drm] register mmio base: 0xFE900000
[    4.188150] [drm] register mmio size: 262144
[    4.188158] [drm] probing gen 2 caps for device 1022:1453 = 737903/e
[    4.188159] [drm] probing mlw for device 1022:1453 = 737903
[    4.188166] [drm] UVD is enabled in VM mode
[    4.188168] [drm] VCE enabled in VM mode
[    4.188346] amdgpu 0000:26:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[    4.188365] ATOM BIOS: xxx-xxx-xxx
[    4.188371] [drm] GPU post is not needed
[    4.188487] [drm] vm size is 64 GB, block size is 13-bit, fragment size is 4-bit
[    4.193786] amdgpu 0000:26:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    4.193787] amdgpu 0000:26:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[    4.193790] [drm] Detected VRAM RAM=4096M, BAR=256M
[    4.193791] [drm] RAM width 256bits GDDR5
[    4.193843] [TTM] Zone  kernel: Available graphics memory: 8212596 kiB
[    4.193843] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    4.193844] [TTM] Initializing pool allocator
[    4.193846] [TTM] Initializing DMA pool allocator
[    4.193858] [drm] amdgpu: 4096M of VRAM memory ready
[    4.193859] [drm] amdgpu: 4096M of GTT memory ready.
[    4.193864] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.193936] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[    4.193952] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.193953] [drm] Driver supports precise vblank timestamp query.
[    4.193981] amdgpu 0000:26:00.0: amdgpu: using MSI.
[    4.193998] [drm] amdgpu: irq initialized.
[    4.200288] usb 1-6: current rate 30464 is different from the runtime rate 96000
[    4.208628] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard
[    4.239297] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[    4.239298] usb 1-6: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
[    4.263299] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[    4.263301] usb 1-6: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
[    4.325319] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[    4.325323] usb 1-6: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
[    4.349316] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[    4.349318] usb 1-6: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
[    4.366378] amdgpu: [powerplay] amdgpu: powerplay sw initialized
[    4.366606] [drm] AMDGPU Display Connectors
[    4.366606] [drm] Connector 0:
[    4.366607] [drm]   DP-1
[    4.366607] [drm]   HPD6
[    4.366608] [drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[    4.366608] [drm]   Encoders:
[    4.366609] [drm]     DFP1: INTERNAL_UNIPHY2
[    4.366609] [drm] Connector 1:
[    4.366609] [drm]   DP-2
[    4.366609] [drm]   HPD4
[    4.366610] [drm]   DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[    4.366610] [drm]   Encoders:
[    4.366611] [drm]     DFP2: INTERNAL_UNIPHY2
[    4.366611] [drm] Connector 2:
[    4.366611] [drm]   DP-3
[    4.366611] [drm]   HPD1
[    4.366612] [drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[    4.366612] [drm]   Encoders:
[    4.366613] [drm]     DFP3: INTERNAL_UNIPHY1
[    4.366613] [drm] Connector 3:
[    4.366613] [drm]   HDMI-A-1
[    4.366613] [drm]   HPD5
[    4.366614] [drm]   DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[    4.366614] [drm]   Encoders:
[    4.366615] [drm]     DFP4: INTERNAL_UNIPHY1
[    4.366615] [drm] Connector 4:
[    4.366615] [drm]   DVI-D-1
[    4.366615] [drm]   HPD3
[    4.366616] [drm]   DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[    4.366616] [drm]   Encoders:
[    4.366617] [drm]     DFP5: INTERNAL_UNIPHY
[    4.371787] [drm] Chained IB support enabled!
[    4.373317] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[    4.373318] usb 1-6: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
[    4.379176] amdgpu 0000:26:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0xffffb439424e5040
[    4.379203] amdgpu 0000:26:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0xffffb439424e50c0
[    4.379229] amdgpu 0000:26:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0xffffb439424e5140
[    4.379259] amdgpu 0000:26:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0xffffb439424e51c0
[    4.379283] amdgpu 0000:26:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0xffffb439424e5240
[    4.379309] amdgpu 0000:26:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0xffffb439424e52c0
[    4.379336] amdgpu 0000:26:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0xffffb439424e5340
[    4.379360] amdgpu 0000:26:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0xffffb439424e53c0
[    4.379383] amdgpu 0000:26:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0xffffb439424e5440
[    4.379400] amdgpu 0000:26:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0xffffb439424e54e0
[    4.383013] amdgpu 0000:26:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0xffffb439424e5560
[    4.383042] amdgpu 0000:26:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0xffffb439424e55e0
[    4.385639] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.386075] amdgpu 0000:26:00.0: fence driver on ring 12 use gpu addr 0x000000f4002aea80, cpu addr 0xffffb43942c5ba80
[    4.387166] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.387228] amdgpu 0000:26:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0xffffb439424e56e0
[    4.387253] amdgpu 0000:26:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0xffffb439424e5760
[    4.387274] amdgpu 0000:26:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0xffffb439424e57e0
[    4.448543] [drm] ring test on 0 succeeded in 11 usecs
[    4.449167] [drm] ring test on 9 succeeded in 9 usecs
[    4.449190] [drm] ring test on 1 succeeded in 7 usecs
[    4.449237] [drm] ring test on 2 succeeded in 16 usecs
[    4.449265] [drm] ring test on 3 succeeded in 9 usecs
[    4.449296] [drm] ring test on 4 succeeded in 10 usecs
[    4.449324] [drm] ring test on 5 succeeded in 9 usecs
[    4.449355] [drm] ring test on 6 succeeded in 10 usecs
[    4.449383] [drm] ring test on 7 succeeded in 9 usecs
[    4.449414] [drm] ring test on 8 succeeded in 10 usecs
[    4.449499] [drm] ring test on 10 succeeded in 5 usecs
[    4.449507] [drm] ring test on 11 succeeded in 5 usecs
[    4.469013] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.469013] Bluetooth: BNEP filters: protocol multicast
[    4.469015] Bluetooth: BNEP socket layer initialized
[    4.476000] [drm] ring test on 12 succeeded in 1 usecs
[    4.476002] [drm] UVD initialized successfully.
[    4.576973] [drm] ring test on 13 succeeded in 5 usecs
[    4.576985] [drm] ring test on 14 succeeded in 2 usecs
[    4.577000] [drm] ring test on 15 succeeded in 3 usecs
[    4.577000] [drm] VCE initialized successfully.
[    4.577187] [drm] ib test on ring 0 succeeded
[    4.577351] [drm] ib test on ring 1 succeeded
[    4.577416] [drm] ib test on ring 2 succeeded
[    4.577462] [drm] ib test on ring 3 succeeded
[    4.577507] [drm] ib test on ring 4 succeeded
[    4.577552] [drm] ib test on ring 5 succeeded
[    4.577598] [drm] ib test on ring 6 succeeded
[    4.577637] [drm] ib test on ring 7 succeeded
[    4.577683] [drm] ib test on ring 8 succeeded
[    4.610465] usbcore: registered new interface driver snd-usb-audio
[    4.708819] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[    4.709066] enp37s0: 0xffffb43941ab1000, 70:85:c2:a2:9a:48, IRQ 63
[    4.758826] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[    5.093358] [drm] ib test on ring 9 succeeded
[    5.093397] [drm] ib test on ring 10 succeeded
[    5.093424] [drm] ib test on ring 11 succeeded
[    5.094654] [drm] ib test on ring 12 succeeded
[    5.094905] [drm] ib test on ring 13 succeeded
[    5.278863] [drm] fb mappable at 0xE062F000
[    5.278865] [drm] vram apper at 0xE0000000
[    5.278866] [drm] size 8294400
[    5.278866] [drm] fb depth is 24
[    5.278867] [drm]    pitch is 7680
[    5.278943] fbcon: amdgpudrmfb (fb0) is primary device
[    5.501141] Console: switching to colour frame buffer device 240x67
[    5.673842] amdgpu 0000:26:00.0: fb0: amdgpudrmfb frame buffer device
[    5.700471] amdgpu 0000:26:00.0: kfd not supported on this ASIC
[    5.700487] [drm] Initialized amdgpu 3.19.0 20150101 for 0000:26:00.0 on minor 0
[    6.517379] [drm:dce_v11_0_afmt_setmode [amdgpu]] *ERROR* Couldn't read SADs: 0
[    7.798216] r8168: enp37s0: link up
[    7.798230] IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
[   11.800680] logitech-hidpp-device 0003:046D:2011.0005: HID++ 1.0 device connected.
[   13.343273] systemd-journald[311]: File /var/log/journal/b2d91a2d0f22425ab22522a000850f26/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   13.970310] [drm:dce_v11_0_afmt_setmode [amdgpu]] *ERROR* Couldn't read SADs: 0
[   14.430013] Bluetooth: RFCOMM TTY layer initialized
[   14.430018] Bluetooth: RFCOMM socket layer initialized
[   14.430024] Bluetooth: RFCOMM ver 1.11
[   15.040974] ata5.00: configured for UDMA/133
[   15.040976] ata5: EH complete
[   15.049324] ata9.00: configured for UDMA/133
[   15.049327] ata9: EH complete
[   15.064552] ata10.00: configured for UDMA/133
[   15.064554] ata10: EH complete
[   15.327125] logitech-hidpp-device 0003:046D:400A.0006: HID++ 2.0 device connected.
[   23.992233] tun: Universal TUN/TAP device driver, 1.6
[ 5815.711710] usb usb1-port6: disabled by hub (EMI?), re-enabling...
[ 5815.711721] usb 1-6: USB disconnect, device number 3
[ 5816.072372] usb 1-6: new full-speed USB device number 5 using xhci_hcd
[ 5816.466759] usb 1-6: current rate 30464 is different from the runtime rate 96000
[ 5816.505729] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[ 5816.505734] usb 1-6: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
[ 5816.529732] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[ 5816.529736] usb 1-6: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
[ 5816.592755] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[ 5816.592760] usb 1-6: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
[ 5816.617744] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[ 5816.617749] usb 1-6: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
[ 5816.641774] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[ 5816.641779] usb 1-6: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
[ 5816.653216] input: USB Sound Device         as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.3/0003:0D8C:0102.0009/input/input19
[ 5816.709199] hid-generic 0003:0D8C:0102.0009: input,hidraw4: USB HID v1.00 Device [USB Sound Device        ] on usb-0000:03:00.0-6/input3
[31986.271795] usb 1-3: new high-speed USB device number 6 using xhci_hcd
[31986.517793] usb-storage 1-3:1.1: USB Mass Storage device detected
[31986.517961] scsi host11: usb-storage 1-3:1.1
[31986.518210] usbcore: registered new interface driver usb-storage
[31986.523013] usbcore: registered new interface driver uas
[31987.545503] scsi 11:0:0:0: CD-ROM            Linux    File-CD Gadget   0404 PQ: 0 ANSI: 2
[31987.577590] sr 11:0:0:0: [sr0] scsi-1 drive
[31987.577593] cdrom: Uniform CD-ROM driver Revision: 3.20
[31987.577750] sr 11:0:0:0: Attached scsi CD-ROM sr0
[31989.644481] usb 1-3: USB disconnect, device number 6
[31990.068012] usb 1-3: new high-speed USB device number 7 using xhci_hcd
[31990.258253] usb-storage 1-3:1.1: USB Mass Storage device detected
[31990.258433] scsi host11: usb-storage 1-3:1.1
[31991.278649] scsi 11:0:0:0: CD-ROM            Linux    File-CD Gadget   0404 PQ: 0 ANSI: 2
[31991.280568] sr 11:0:0:0: [sr0] scsi-1 drive
[31991.280734] sr 11:0:0:0: Attached scsi CD-ROM sr0
[31992.972692] ISO 9660 Extensions: Microsoft Joliet Level 1
[31992.975109] ISOFS: changing to secondary root
[32029.193611] usb 1-3: reset high-speed USB device number 7 using xhci_hcd
[32029.359355] VFS: busy inodes on changed media or resized disk sr0
[32134.426247] usb 1-3: USB disconnect, device number 7
[33486.122372] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.

so you used timeshift to go back before installing 4.19 right? meaning 4.19 is no longer on there ?
maybe install 4.19 and produce those outputs so that the problem can be worked towards your intended outcome. it also provides a comparison as to why its behaving differently in 4.19

4.19 is still there. I used Timeshift after Manjaro XFCE 18.0 with 4.19 LTS was installed. I can use GRUB to switch between the two kernels.

if running 4.19 is your intended outcome, post relevant info after booting to 4.19 for comparison and so you can work the problem live if possible.

2 Likes

DUH! Thank you for the heads-up. Sorry, not thinking straight this morning. Here are the outputs for 4.19 LTS:

$ inxi -Fxxxz

System:
Kernel: 4.19.2-1-MANJARO x86_64 bits: 64 
  compiler: gcc v: 8.2.1 Desktop: N/A wm: xfwm4 dm: LightDM 1.28.0 
  Distro: Manjaro Linux 
Machine:
  Type: Desktop Mobo: ASRock model: B450 Pro4 serial: <filter> 
  UEFI [Legacy]: American Megatrends v: P1.30 date: 07/04/2018 
Battery:
  Device-1: hidpp_battery_0 model: Logitech K520 serial: <filter> 
  charge: 70% (should be ignored) rechargeable: yes status: Discharging 
  Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M325 
  serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
  status: Discharging 
CPU:
  Topology: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ 
  rev: 2 L2 cache: 3072 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 93462 
  Speed: 3328 MHz min/max: 1550/3900 MHz boost: enabled Core speeds (MHz): 
  1: 3328 2: 1893 3: 3435 4: 3845 5: 2923 6: 3295 7: 2338 8: 3245 9: 2689 
  10: 2984 11: 2458 12: 1515 
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X] 
  vendor: Gigabyte driver: amdgpu v: kernel bus ID: 26:00.0 
  chip ID: 1002:67df 
  Display: x11 server: X.org 1.20.3 driver: amdgpu,ati unloaded: modesetting 
  alternate: fbdev,vesa resolution: <xdpyinfo missing> 
  OpenGL: renderer: Radeon RX 570 Series (POLARIS10 DRM 3.27.0 
  4.19.2-1-MANJARO LLVM 7.0.0) 
  v: 4.5 Mesa 18.2.5 compat-v: 4.4 direct render: Yes 
Audio:
  Device-1: AMD Ellesmere [Radeon RX 580] vendor: Gigabyte 
  driver: snd_hda_intel v: kernel bus ID: 26:00.1 chip ID: 1002:aaf0 
  Device-2: AMD Family 17h HD Audio vendor: ASRock driver: snd_hda_intel 
  v: kernel bus ID: 28:00.3 chip ID: 1022:1457 
  Device-3: C-Media CM106 Like Sound Device type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-6:3 chip ID: 0d8c:0102 
  Device-4: Blue Microphones Yeti Stereo Microphone type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-10:4 chip ID: b58e:9e84 
  serial: <filter> 
  Sound Server: ALSA v: k4.19.2-1-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASRock driver: r8168 v: 8.045.08-NAPI port: d000 bus ID: 25:00.0 
  chip ID: 10ec:8168 
  IF: enp37s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:
  Local Storage: total: 3.86 TiB used: 2.03 TiB (52.5%) 
  ID-1: /dev/sda vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB 
  speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC29 scheme: GPT 
  ID-2: /dev/sdb vendor: OCZ model: TRION150 size: 223.57 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: 12.2 scheme: GPT 
  ID-3: /dev/sdc vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB 
  speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC29 scheme: GPT 
Partition:
  ID-1: / size: 43.00 GiB used: 14.72 GiB (34.2%) fs: ext4 dev: /dev/sdb1 
  ID-2: /home size: 172.92 GiB used: 106.77 GiB (61.7%) fs: ext4 
  dev: /dev/sdb3 
  ID-3: swap-1 size: 2.93 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb2 
Sensors:
  System Temperatures: cpu: 38.5 C mobo: N/A gpu: amdgpu temp: 35 C 
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 745 
Info:
  Processes: 324 Uptime: 1m Memory: 15.66 GiB used: 1.82 GiB (11.6%) 
  Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23 
  running in: xfce4-terminal inxi: 3.0.27

$ dmesg

[    0.000000] Linux version 4.19.2-1-MANJARO (builduser@development) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Tue Nov 13 22:35:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=43f68119-e94a-4d75-9145-c9f6cfe36844 rw quiet resume=UUID=a365dd42-bbe0-4f8a-b262-024a3d241626
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dae3cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dae3d000-0x00000000dc328fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc329000-0x00000000dc41dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc41e000-0x00000000dc7f4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc7f5000-0x00000000dd257fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd258000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Pro4, BIOS P1.30 07/04/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3892.565 MHz processor
[    0.000795] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000796] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000803] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000806] MTRR default type: uncachable
[    0.000807] MTRR fixed ranges enabled:
[    0.000807]   00000-9FFFF write-back
[    0.000808]   A0000-BFFFF write-through
[    0.000809]   C0000-FFFFF write-protect
[    0.000809] MTRR variable ranges enabled:
[    0.000810]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000811]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000812]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000813]   3 disabled
[    0.000813]   4 disabled
[    0.000813]   5 disabled
[    0.000814]   6 disabled
[    0.000814]   7 disabled
[    0.000815] TOM2: 0000000420000000 aka 16896M
[    0.001074] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001152] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001156] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.004533] Scanning 1 areas for low memory corruption
[    0.004535] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.004537] Using GB pages for direct mapping
[    0.004538] BRK [0x33f601000, 0x33f601fff] PGTABLE
[    0.004539] BRK [0x33f602000, 0x33f602fff] PGTABLE
[    0.004540] BRK [0x33f603000, 0x33f603fff] PGTABLE
[    0.004570] BRK [0x33f604000, 0x33f604fff] PGTABLE
[    0.004572] BRK [0x33f605000, 0x33f605fff] PGTABLE
[    0.004705] BRK [0x33f606000, 0x33f606fff] PGTABLE
[    0.004769] BRK [0x33f607000, 0x33f607fff] PGTABLE
[    0.004818] BRK [0x33f608000, 0x33f608fff] PGTABLE
[    0.004883] BRK [0x33f609000, 0x33f609fff] PGTABLE
[    0.004920] BRK [0x33f60a000, 0x33f60afff] PGTABLE
[    0.004980] BRK [0x33f60b000, 0x33f60bfff] PGTABLE
[    0.004981] BRK [0x33f60c000, 0x33f60cfff] PGTABLE
[    0.005168] RAMDISK: [mem 0x36cd3000-0x37660fff]
[    0.005172] ACPI: Early table checksum verification disabled
[    0.005198] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.005201] ACPI: XSDT 0x00000000DC41E098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005205] ACPI: FACP 0x00000000DC4249A0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.005209] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
[    0.005212] ACPI: DSDT 0x00000000DC41E1E8 0067B4 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.005214] ACPI: FACS 0x00000000DC7DDE00 000040
[    0.005216] ACPI: APIC 0x00000000DC424AB8 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.005218] ACPI: FPDT 0x00000000DC424B98 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005220] ACPI: FIDT 0x00000000DC424BE0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005223] ACPI: SSDT 0x00000000DC424C80 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.005225] ACPI: SSDT 0x00000000DC42D918 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.005227] ACPI: CRAT 0x00000000DC42F370 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.005229] ACPI: CDIT 0x00000000DC42FF40 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.005231] ACPI: SSDT 0x00000000DC42FF70 002C36 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.005234] ACPI: MCFG 0x00000000DC432BA8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.005236] ACPI: AAFT 0x00000000DC432BE8 000294 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.005238] ACPI: HPET 0x00000000DC432E80 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.005240] ACPI: SSDT 0x00000000DC432EB8 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.005242] ACPI: UEFI 0x00000000DC432EE0 000042 (v01                 00000000      00000000)
[    0.005244] ACPI: IVRS 0x00000000DC432F28 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.005246] ACPI: SSDT 0x00000000DC432FF8 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.005249] ACPI: SSDT 0x00000000DC434A40 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.005251] ACPI: WSMT 0x00000000DC434B38 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005256] ACPI: Local APIC address 0xfee00000
[    0.005372] No NUMA configuration found
[    0.005373] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.005375] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[    0.005395] Zone ranges:
[    0.005396]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005396]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005397]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.005398]   Device   empty
[    0.005399] Movable zone start for each node
[    0.005399] Early memory node ranges
[    0.005400]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.005400]   node   0: [mem 0x0000000000100000-0x0000000009cfffff]
[    0.005401]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.005401]   node   0: [mem 0x000000000a20a000-0x000000000affffff]
[    0.005401]   node   0: [mem 0x000000000b020000-0x00000000dae3cfff]
[    0.005402]   node   0: [mem 0x00000000dc329000-0x00000000dc41dfff]
[    0.005402]   node   0: [mem 0x00000000dd258000-0x00000000deffffff]
[    0.005403]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.005555] Reserved but unavailable: 14004 pages
[    0.005556] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.005557] On node 0 totalpages: 4177100
[    0.005558]   DMA zone: 64 pages used for memmap
[    0.005559]   DMA zone: 21 pages reserved
[    0.005559]   DMA zone: 3996 pages, LIFO batch:0
[    0.005617]   DMA32 zone: 14055 pages used for memmap
[    0.005617]   DMA32 zone: 899504 pages, LIFO batch:63
[    0.018735]   Normal zone: 51150 pages used for memmap
[    0.018737]   Normal zone: 3273600 pages, LIFO batch:63
[    0.064653] ACPI: PM-Timer IO Port: 0x808
[    0.064655] ACPI: Local APIC address 0xfee00000
[    0.064660] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.064676] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.064680] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.064682] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.064682] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.064683] ACPI: IRQ0 used by override.
[    0.064684] ACPI: IRQ9 used by override.
[    0.064685] Using ACPI (MADT) for SMP configuration information
[    0.064686] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.064690] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.064710] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.064711] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.064711] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.064712] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.064712] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.064713] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[    0.064714] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[    0.064715] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.064716] PM: Registered nosave memory: [mem 0xdae3d000-0xdc328fff]
[    0.064718] PM: Registered nosave memory: [mem 0xdc41e000-0xdc7f4fff]
[    0.064718] PM: Registered nosave memory: [mem 0xdc7f5000-0xdd257fff]
[    0.064719] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.064719] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.064720] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.064720] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[    0.064721] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[    0.064721] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.064721] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.064722] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.064722] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.064722] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.064723] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.064723] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.064724] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.064724] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.064724] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.064725] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.064725] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.064726] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.064726] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.064726] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.064727] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.064727] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.064727] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.064729] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.064730] Booting paravirtualized kernel on bare hardware
[    0.064732] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.150850] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.150855] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.151323] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.151329] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.151329] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.151348] Built 1 zonelists, mobility grouping on.  Total pages: 4111810
[    0.151348] Policy zone: Normal
[    0.151349] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=43f68119-e94a-4d75-9145-c9f6cfe36844 rw quiet resume=UUID=a365dd42-bbe0-4f8a-b262-024a3d241626
[    0.156622] Calgary: detecting Calgary via BIOS EBDA area
[    0.156623] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.181139] Memory: 16338676K/16708400K available (12300K kernel code, 1383K rwdata, 3688K rodata, 1536K init, 3804K bss, 369724K reserved, 0K cma-reserved)
[    0.181250] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.181256] ftrace: allocating 36074 entries in 141 pages
[    0.191172] rcu: Preemptible hierarchical RCU implementation.
[    0.191173] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.191173] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.191173] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.191174] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.191174] 	Tasks RCU enabled.
[    0.191175] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.192354] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[    0.192505] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.192571] spurious 8259A interrupt: IRQ7.
[    0.192587] Console: colour dummy device 80x25
[    0.192590] console [tty0] enabled
[    0.192603] ACPI: Core revision 20180810
[    0.192758] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.192782] hpet clockevent registered
[    0.192785] APIC: Switch to symmetric I/O mode setup
[    0.261315] Switched APIC routing to physical flat.
[    0.262066] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.276121] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x7037d5578e9, max_idle_ns: 881591017113 ns
[    0.276128] Calibrating delay loop (skipped), value calculated using timer frequency.. 7788.51 BogoMIPS (lpj=12975216)
[    0.276130] pid_max: default: 32768 minimum: 301
[    0.276171] Security Framework initialized
[    0.276171] Yama: becoming mindful.
[    0.276174] AppArmor: AppArmor disabled by boot time parameter
[    0.277914] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.278845] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.278888] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.278919] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.279104] mce: CPU supports 23 MCE banks
[    0.279120] LVT offset 1 assigned for vector 0xf9
[    0.279178] LVT offset 2 assigned for vector 0xf4
[    0.279188] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.279189] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.279190] Spectre V2 : Mitigation: Full AMD retpoline
[    0.279190] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.279190] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.279191] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.283134] Freeing SMP alternatives memory: 28K
[    0.289455] smpboot: CPU0: AMD Ryzen 5 2600 Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.306130] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.306135] ... version:                0
[    0.306135] ... bit width:              48
[    0.306135] ... generic registers:      6
[    0.306136] ... value mask:             0000ffffffffffff
[    0.306136] ... max period:             00007fffffffffff
[    0.306137] ... fixed-purpose events:   0
[    0.306137] ... event mask:             000000000000003f
[    0.312794] rcu: Hierarchical SRCU implementation.
[    0.336135] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.342799] smp: Bringing up secondary CPUs ...
[    0.382802] x86: Booting SMP configuration:
[    0.382803] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.784930] smp: Brought up 1 node, 12 CPUs
[    0.784930] smpboot: Max logical packages: 2
[    0.784930] smpboot: Total of 12 processors activated (93458.12 BogoMIPS)
[    0.786217] devtmpfs: initialized
[    0.786217] x86/mm: Memory block size: 128MB
[    0.786927] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[    0.786927] PM: Registering ACPI NVS region [mem 0xdc41e000-0xdc7f4fff] (4026368 bytes)
[    0.786927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.786927] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.786927] pinctrl core: initialized pinctrl subsystem
[    0.786927] RTC time:  2:32:41, date: 11/22/18
[    0.786927] NET: Registered protocol family 16
[    0.786927] audit: initializing netlink subsys (disabled)
[    0.786927] audit: type=2000 audit(1542853960.529:1): state=initialized audit_enabled=0 res=1
[    0.786927] cpuidle: using governor ladder
[    0.786927] cpuidle: using governor menu
[    0.786927] ACPI: bus type PCI registered
[    0.786927] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.786927] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.786927] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.786927] PCI: Using configuration type 1 for base access
[    0.786927] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.786927] mtrr: probably your BIOS does not setup all CPUs.
[    0.786927] mtrr: corrected configuration.
[    0.786927] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.786927] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.786927] ACPI: Added _OSI(Module Device)
[    0.786927] ACPI: Added _OSI(Processor Device)
[    0.786927] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.786927] ACPI: Added _OSI(Processor Aggregator Device)
[    0.786927] ACPI: Added _OSI(Linux-Dell-Video)
[    0.786927] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.797563] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.800198] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.803081] ACPI: Interpreter enabled
[    0.803093] ACPI: (supports S0 S3 S4 S5)
[    0.803094] ACPI: Using IOAPIC for interrupt routing
[    0.803362] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.803615] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.810900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.810904] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.811052] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.811193] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.811202] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.811512] PCI host bridge to bus 0000:00
[    0.811513] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.811514] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.811515] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.811516] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.811517] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.811518] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.811519] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.811520] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.811521] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.811525] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.811598] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.811687] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.811753] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.812090] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.812182] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.812258] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.812319] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.812421] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.812515] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.812596] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.812657] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.812683] pci 0000:00:07.1: enabling Extended Tags
[    0.812757] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.812853] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.812915] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.813094] pci 0000:00:08.1: enabling Extended Tags
[    0.813170] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.813298] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.813513] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.813730] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.813780] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.813831] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.813882] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.813931] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.813980] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.814029] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.814080] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.814216] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.814236] pci 0000:03:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
[    0.814310] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.814379] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.814421] pci 0000:03:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
[    0.814428] pci 0000:03:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
[    0.814463] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.814513] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.814580] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.814658] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.814660] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.814662] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.814748] pci 0000:1d:00.0: [1022:43c7] type 01 class 0x060400
[    0.814828] pci 0000:1d:00.0: PME# supported from D3hot D3cold
[    0.814894] pci 0000:1d:01.0: [1022:43c7] type 01 class 0x060400
[    0.814973] pci 0000:1d:01.0: PME# supported from D3hot D3cold
[    0.815040] pci 0000:1d:04.0: [1022:43c7] type 01 class 0x060400
[    0.815119] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[    0.815184] pci 0000:1d:05.0: [1022:43c7] type 01 class 0x060400
[    0.815263] pci 0000:1d:05.0: PME# supported from D3hot D3cold
[    0.815330] pci 0000:1d:06.0: [1022:43c7] type 01 class 0x060400
[    0.815409] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[    0.815476] pci 0000:1d:07.0: [1022:43c7] type 01 class 0x060400
[    0.815556] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[    0.815634] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.815638] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.815640] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.815673] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.815711] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.815755] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.815793] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.815844] pci 0000:24:00.0: [1b21:0612] type 00 class 0x010601
[    0.815871] pci 0000:24:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.815882] pci 0000:24:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.815894] pci 0000:24:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.815905] pci 0000:24:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.815916] pci 0000:24:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.815928] pci 0000:24:00.0: reg 0x24: [mem 0xfe600000-0xfe6001ff]
[    0.816033] pci 0000:24:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:1d:06.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.816091] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.816095] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.816097] pci 0000:1d:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.816152] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
[    0.816191] pci 0000:25:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.816226] pci 0000:25:00.0: reg 0x18: [mem 0xfe504000-0xfe504fff 64bit]
[    0.816247] pci 0000:25:00.0: reg 0x20: [mem 0xfe500000-0xfe503fff 64bit]
[    0.816370] pci 0000:25:00.0: supports D1 D2
[    0.816371] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.816531] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.816536] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.816538] pci 0000:1d:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.816630] pci 0000:26:00.0: [1002:67df] type 00 class 0x030000
[    0.816651] pci 0000:26:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.816659] pci 0000:26:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.816665] pci 0000:26:00.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.816670] pci 0000:26:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
[    0.816675] pci 0000:26:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
[    0.816725] pci 0000:26:00.0: supports D1 D2
[    0.816726] pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.816801] pci 0000:26:00.1: [1002:aaf0] type 00 class 0x040300
[    0.816818] pci 0000:26:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
[    0.816879] pci 0000:26:00.1: supports D1 D2
[    0.816946] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.816948] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.816950] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.816952] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.817146] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[    0.817175] pci 0000:27:00.0: enabling Extended Tags
[    0.817234] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[    0.817249] pci 0000:27:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
[    0.817259] pci 0000:27:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
[    0.817265] pci 0000:27:00.2: enabling Extended Tags
[    0.817327] pci 0000:27:00.3: [1022:145f] type 00 class 0x0c0330
[    0.817339] pci 0000:27:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
[    0.817356] pci 0000:27:00.3: enabling Extended Tags
[    0.817382] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[    0.817434] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.817437] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.817502] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[    0.817534] pci 0000:28:00.0: enabling Extended Tags
[    0.817597] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[    0.817623] pci 0000:28:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
[    0.817629] pci 0000:28:00.2: enabling Extended Tags
[    0.817656] pci 0000:28:00.2: PME# supported from D3hot D3cold
[    0.817701] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[    0.817711] pci 0000:28:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
[    0.817734] pci 0000:28:00.3: enabling Extended Tags
[    0.817759] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.817812] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.817816] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.818152] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.818206] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.818253] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.818311] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.818364] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.818407] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.818450] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.818493] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.819464] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.819465] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.819467] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.819467] vgaarb: loaded
[    0.819557] ACPI: bus type USB registered
[    0.819565] usbcore: registered new interface driver usbfs
[    0.819569] usbcore: registered new interface driver hub
[    0.819591] usbcore: registered new device driver usb
[    0.819605] pps_core: LinuxPPS API ver. 1 registered
[    0.819605] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.819607] PTP clock support registered
[    0.819611] EDAC MC: Ver: 3.0.0
[    0.819688] PCI: Using ACPI for IRQ routing
[    0.821876] PCI: pci_cache_line_size set to 64 bytes
[    0.821933] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.821934] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.821935] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.821935] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.821936] e820: reserve RAM buffer [mem 0xdae3d000-0xdbffffff]
[    0.821936] e820: reserve RAM buffer [mem 0xdc41e000-0xdfffffff]
[    0.821937] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.821938] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.822791] NetLabel: Initializing
[    0.822791] NetLabel:  domain hash size = 128
[    0.822791] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.822791] NetLabel:  unlabeled traffic allowed by default
[    0.822816] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.822819] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.826123] clocksource: Switched to clocksource tsc-early
[    0.833365] VFS: Disk quotas dquot_6.6.0
[    0.833379] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.833428] pnp: PnP ACPI init
[    0.833529] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.833533] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.833592] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.833594] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.833661] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.833834] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.833835] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.833836] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.833837] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.833839] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.834055] pnp 00:04: [dma 0 disabled]
[    0.834085] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.834300] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.834301] system 00:05: [io  0x040b] has been reserved
[    0.834302] system 00:05: [io  0x04d6] has been reserved
[    0.834303] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.834303] system 00:05: [io  0x0c14] has been reserved
[    0.834304] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.834305] system 00:05: [io  0x0c52] has been reserved
[    0.834306] system 00:05: [io  0x0c6c] has been reserved
[    0.834307] system 00:05: [io  0x0c6f] has been reserved
[    0.834308] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.834309] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.834310] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.834310] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.834311] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.834312] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.834313] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.834314] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.834315] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.834316] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.834317] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.834318] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.834319] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.834320] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.834321] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.834322] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.834323] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.834326] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.834704] pnp: PnP ACPI: found 6 devices
[    0.840176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.840232] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.840241] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.840249] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.840258] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.840266] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.840268] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.840272] pci 0000:1d:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.840278] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.840280] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.840283] pci 0000:1d:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.840289] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.840290] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.840293] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.840299] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.840300] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.840302] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.840306] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.840307] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.840309] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.840311] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.840313] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.840315] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.840319] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.840321] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.840325] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.840326] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.840327] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.840328] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.840329] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.840330] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.840331] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.840331] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.840332] pci_bus 0000:03: resource 0 [io  0xd000-0xefff]
[    0.840333] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe7fffff]
[    0.840334] pci_bus 0000:1d: resource 0 [io  0xd000-0xefff]
[    0.840335] pci_bus 0000:1d: resource 1 [mem 0xfe500000-0xfe6fffff]
[    0.840336] pci_bus 0000:24: resource 0 [io  0xe000-0xefff]
[    0.840337] pci_bus 0000:24: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.840337] pci_bus 0000:25: resource 0 [io  0xd000-0xdfff]
[    0.840338] pci_bus 0000:25: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.840339] pci_bus 0000:26: resource 0 [io  0xf000-0xffff]
[    0.840340] pci_bus 0000:26: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.840341] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.840342] pci_bus 0000:27: resource 1 [mem 0xfe200000-0xfe4fffff]
[    0.840343] pci_bus 0000:28: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.840414] NET: Registered protocol family 2
[    0.840564] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.840598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.840730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.840832] TCP: Hash tables configured (established 131072 bind 65536)
[    0.840865] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.840898] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.840958] NET: Registered protocol family 1
[    0.840962] NET: Registered protocol family 44
[    0.841092] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.841097] pci 0000:26:00.1: Linked as a consumer to 0000:26:00.0
[    0.841218] PCI: CLS 64 bytes, default 64
[    0.841240] Unpacking initramfs...
[    0.922712] Freeing initrd memory: 9784K
[    0.922729] AMD-Vi: IOMMU performance counters supported
[    0.922956] iommu: Adding device 0000:00:01.0 to group 0
[    0.923045] iommu: Adding device 0000:00:01.3 to group 1
[    0.923126] iommu: Adding device 0000:00:02.0 to group 2
[    0.923213] iommu: Adding device 0000:00:03.0 to group 3
[    0.923288] iommu: Adding device 0000:00:03.1 to group 4
[    0.923372] iommu: Adding device 0000:00:04.0 to group 5
[    0.923453] iommu: Adding device 0000:00:07.0 to group 6
[    0.923541] iommu: Adding device 0000:00:07.1 to group 7
[    0.923619] iommu: Adding device 0000:00:08.0 to group 8
[    0.923702] iommu: Adding device 0000:00:08.1 to group 9
[    0.923785] iommu: Adding device 0000:00:14.0 to group 10
[    0.923798] iommu: Adding device 0000:00:14.3 to group 10
[    0.923904] iommu: Adding device 0000:00:18.0 to group 11
[    0.923915] iommu: Adding device 0000:00:18.1 to group 11
[    0.923927] iommu: Adding device 0000:00:18.2 to group 11
[    0.923941] iommu: Adding device 0000:00:18.3 to group 11
[    0.923952] iommu: Adding device 0000:00:18.4 to group 11
[    0.923963] iommu: Adding device 0000:00:18.5 to group 11
[    0.923975] iommu: Adding device 0000:00:18.6 to group 11
[    0.923986] iommu: Adding device 0000:00:18.7 to group 11
[    0.924088] iommu: Adding device 0000:03:00.0 to group 12
[    0.924107] iommu: Adding device 0000:03:00.1 to group 12
[    0.924126] iommu: Adding device 0000:03:00.2 to group 12
[    0.924137] iommu: Adding device 0000:1d:00.0 to group 12
[    0.924149] iommu: Adding device 0000:1d:01.0 to group 12
[    0.924159] iommu: Adding device 0000:1d:04.0 to group 12
[    0.924169] iommu: Adding device 0000:1d:05.0 to group 12
[    0.924180] iommu: Adding device 0000:1d:06.0 to group 12
[    0.924190] iommu: Adding device 0000:1d:07.0 to group 12
[    0.924202] iommu: Adding device 0000:24:00.0 to group 12
[    0.924221] iommu: Adding device 0000:25:00.0 to group 12
[    0.924324] iommu: Adding device 0000:26:00.0 to group 13
[    0.924339] iommu: Using direct mapping for device 0000:26:00.0
[    0.924362] iommu: Adding device 0000:26:00.1 to group 13
[    0.924407] iommu: Adding device 0000:27:00.0 to group 14
[    0.924492] iommu: Adding device 0000:27:00.2 to group 15
[    0.924571] iommu: Adding device 0000:27:00.3 to group 16
[    0.924664] iommu: Adding device 0000:28:00.0 to group 17
[    0.924748] iommu: Adding device 0000:28:00.2 to group 18
[    0.924840] iommu: Adding device 0000:28:00.3 to group 19
[    0.925044] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.925045] AMD-Vi: Extended features (0xf77ef22294ada):
[    0.925045]  PPR NX GT IA GA PC GA_vAPIC
[    0.925047] AMD-Vi: Interrupt remapping enabled
[    0.925048] AMD-Vi: virtual APIC enabled
[    0.925144] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.925928] amd_uncore: AMD NB counters detected
[    0.925932] amd_uncore: AMD LLC counters detected
[    0.926120] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.926176] Scanning for low memory corruption every 60 seconds
[    0.926604] Initialise system trusted keyrings
[    0.926614] Key type blacklist registered
[    0.926637] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.927362] zbud: loaded
[    0.927512] pstore: using zstd compression
[    0.928456] Key type asymmetric registered
[    0.928457] Asymmetric key parser 'x509' registered
[    0.928473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.928508] io scheduler noop registered
[    0.928508] io scheduler deadline registered
[    0.928529] io scheduler cfq registered (default)
[    0.928530] io scheduler mq-deadline registered
[    0.928530] io scheduler kyber registered
[    0.928545] io scheduler bfq registered
[    0.928560] io scheduler bfq-sq registered
[    0.928560] BFQ I/O-scheduler: v9 (with cgroups support)
[    0.928561] blkcg_policy_register: BLKCG_MAX_POLS too small
[    0.930271] pcieport 0000:00:01.3: AER enabled with IRQ 26
[    0.930285] pcieport 0000:00:03.1: AER enabled with IRQ 27
[    0.930298] pcieport 0000:00:07.1: AER enabled with IRQ 28
[    0.930312] pcieport 0000:00:08.1: AER enabled with IRQ 30
[    0.930320] pcieport 0000:00:01.3: Signaling PME with IRQ 26
[    0.930330] pcieport 0000:00:03.1: Signaling PME with IRQ 27
[    0.930339] pcieport 0000:00:07.1: Signaling PME with IRQ 28
[    0.930351] pcieport 0000:00:08.1: Signaling PME with IRQ 30
[    0.930371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.930413] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.930413] vesafb: scrolling: redraw
[    0.930414] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.930422] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000a607efda, using 8128k, total 8128k
[    0.930465] fbcon: Deferring console take-over
[    0.930465] fb0: VESA VGA frame buffer device
[    0.930516] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.930521] ACPI: Power Button [PWRB]
[    0.930550] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.930560] ACPI: Power Button [PWRF]
[    0.930634] Monitor-Mwait will be used to enter C-1 state
[    0.931532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.952569] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.953586] usbcore: registered new interface driver usbserial_generic
[    0.953588] usbserial: USB Serial support registered for generic
[    0.953613] rtc_cmos 00:02: RTC can wake from S4
[    0.953869] rtc_cmos 00:02: registered as rtc0
[    0.953880] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.953984] ledtrig-cpu: registered to indicate activity on CPUs
[    0.954148] NET: Registered protocol family 10
[    0.956108] Segment Routing with IPv6
[    0.956119] NET: Registered protocol family 17
[    0.956473] RAS: Correctable Errors collector initialized.
[    0.957017] microcode: CPU0: patch_level=0x08008206
[    0.957023] microcode: CPU1: patch_level=0x08008206
[    0.957027] microcode: CPU2: patch_level=0x08008206
[    0.957030] microcode: CPU3: patch_level=0x08008206
[    0.957034] microcode: CPU4: patch_level=0x08008206
[    0.957038] microcode: CPU5: patch_level=0x08008206
[    0.957041] microcode: CPU6: patch_level=0x08008206
[    0.957045] microcode: CPU7: patch_level=0x08008206
[    0.957047] microcode: CPU8: patch_level=0x08008206
[    0.957051] microcode: CPU9: patch_level=0x08008206
[    0.957054] microcode: CPU10: patch_level=0x08008206
[    0.957060] microcode: CPU11: patch_level=0x08008206
[    0.957080] microcode: Microcode Update Driver: v2.2.
[    0.957087] sched_clock: Marking stable (893504814, 63571683)->(1114923220, -157846723)
[    0.957260] registered taskstats version 1
[    0.957264] Loading compiled-in X.509 certificates
[    0.958505] Loaded X.509 cert 'Build time autogenerated kernel key: 7f6e4b3182e05b628a0542b67232d36148044914'
[    0.958527] zswap: loaded using pool lzo/zbud
[    0.960221] Key type big_key registered
[    0.960449]   Magic number: 10:371:511
[    0.960467] pcieport 0000:00:01.3: hash matches
[    0.960559] rtc_cmos 00:02: setting system clock to 2018-11-22 02:32:41 UTC (1542853961)
[    1.236418] Freeing unused decrypted memory: 2040K
[    1.443676] Freeing unused kernel image memory: 1536K
[    1.443677] Write protecting the kernel read-only data: 18432k
[    1.444812] Freeing unused kernel image memory: 2008K
[    1.444899] Freeing unused kernel image memory: 408K
[    1.451512] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.451515] Run /init as init process
[    1.503648] SCSI subsystem initialized
[    1.503899] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.503904] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.508865] libata version 3.00 loaded.
[    1.510963] ahci 0000:03:00.1: version 3.0
[    1.511072] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    1.511103] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    1.511105] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    1.511591] scsi host0: ahci
[    1.511670] scsi host1: ahci
[    1.511726] scsi host2: ahci
[    1.511780] scsi host3: ahci
[    1.511832] scsi host4: ahci
[    1.511897] scsi host5: ahci
[    1.511959] scsi host6: ahci
[    1.512007] scsi host7: ahci
[    1.512029] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 42
[    1.512031] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 42
[    1.512031] ata3: DUMMY
[    1.512032] ata4: DUMMY
[    1.512033] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 42
[    1.512034] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 42
[    1.512035] ata7: DUMMY
[    1.512035] ata8: DUMMY
[    1.512155] ahci 0000:24:00.0: SSS flag set, parallel bus scan disabled
[    1.512193] ahci 0000:24:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.512195] ahci 0000:24:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    1.512363] scsi host8: ahci
[    1.512416] scsi host9: ahci
[    1.512440] ata9: SATA max UDMA/133 abar m512@0xfe600000 port 0xfe600100 irq 43
[    1.512442] ata10: SATA max UDMA/133 abar m512@0xfe600000 port 0xfe600180 irq 43
[    1.512543] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.512545] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    1.512656] scsi host10: ahci
[    1.512681] ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 45
[    1.556799] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    1.557076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.557078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.557079] usb usb1: Product: xHCI Host Controller
[    1.557080] usb usb1: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.557080] usb usb1: SerialNumber: 0000:03:00.0
[    1.557171] hub 1-0:1.0: USB hub found
[    1.557182] hub 1-0:1.0: 10 ports detected
[    1.557415] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.557418] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.557419] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[    1.557452] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.557465] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.557466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.557467] usb usb2: Product: xHCI Host Controller
[    1.557468] usb usb2: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.557469] usb usb2: SerialNumber: 0000:03:00.0
[    1.557522] hub 2-0:1.0: USB hub found
[    1.557529] hub 2-0:1.0: 4 ports detected
[    1.557583] usb: port power management may be unreliable
[    1.557687] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    1.557690] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
[    1.557779] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    1.557998] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.557999] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.558000] usb usb3: Product: xHCI Host Controller
[    1.558001] usb usb3: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.558001] usb usb3: SerialNumber: 0000:27:00.3
[    1.558057] hub 3-0:1.0: USB hub found
[    1.558062] hub 3-0:1.0: 4 ports detected
[    1.558180] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    1.558182] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
[    1.558184] xhci_hcd 0000:27:00.3: Host supports USB 3.0  SuperSpeed
[    1.558193] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.558207] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.558208] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.558209] usb usb4: Product: xHCI Host Controller
[    1.558210] usb usb4: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.558210] usb usb4: SerialNumber: 0000:27:00.3
[    1.558264] hub 4-0:1.0: USB hub found
[    1.558269] hub 4-0:1.0: 4 ports detected
[    1.827744] ata11: SATA link down (SStatus 0 SControl 300)
[    1.827747] ata1: SATA link down (SStatus 0 SControl 330)
[    1.886508] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.886509] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    1.936548] tsc: Refined TSC clocksource calibration: 3892.683 MHz
[    1.936556] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7038b5c86cb, max_idle_ns: 881590801795 ns
[    1.936599] clocksource: Switched to clocksource tsc
[    1.986532] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.986672] ata9.00: ATA-9: OCZ-TRION150, SAFZ12.2, max UDMA/133
[    1.986673] ata9.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.986877] ata9.00: configured for UDMA/133
[    2.028214] usb 3-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    2.028215] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.028216] usb 3-2: Product: USB 2.0 Hub
[    2.070377] hub 3-2:1.0: USB hub found
[    2.070711] hub 3-2:1.0: 4 ports detected
[    2.140611] ata2: SATA link down (SStatus 0 SControl 330)
[    2.223355] usb 1-5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
[    2.223357] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.223358] usb 1-5: Product: USB Receiver
[    2.223359] usb 1-5: Manufacturer: Logitech
[    2.242516] hidraw: raw HID events driver (C) Jiri Kosina
[    2.293299] usbcore: registered new interface driver usbhid
[    2.293300] usbhid: USB HID core driver
[    2.295472] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-5/input2
[    2.366161] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    2.366163] usb 3-2.2: new full-speed USB device number 3 using xhci_hcd
[    2.409378] input: Logitech Unifying Device. Wireless PID:404c Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input2
[    2.409396] input: Logitech Unifying Device. Wireless PID:404c Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input3
[    2.409421] input: Logitech Unifying Device. Wireless PID:404c Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input4
[    2.409436] input: Logitech Unifying Device. Wireless PID:404c System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input5
[    2.409483] hid-generic 0003:046D:404C.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404c] on usb-0000:03:00.0-5:1
[    2.425199] input: Logitech K520 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input9
[    2.456240] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:03:00.0-5:2
[    2.469125] input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:400A.0006/input/input10
[    2.491975] usb 3-2.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[    2.491977] usb 3-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.491979] usb 3-2.2: Product: CSR8510 A10
[    2.536606] logitech-hidpp-device 0003:046D:400A.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-5:3
[    2.549258] input: Logitech K830 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input11
[    2.549324] logitech-hidpp-device 0003:046D:404C.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K830] on usb-0000:03:00.0-5:1
[    2.609860] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.610436] ata5.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    2.610438] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.610975] ata5.00: configured for UDMA/133
[    2.611078] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    2.675158] usb 1-6: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10
[    2.675159] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.675161] usb 1-6: Product: USB Sound Device        
[    2.692693] input: USB Sound Device         as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.3/0003:0D8C:0102.0007/input/input12
[    2.746604] hid-generic 0003:0D8C:0102.0007: input,hidraw4: USB HID v1.00 Device [USB Sound Device        ] on usb-0000:03:00.0-6/input3
[    2.869494] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    2.922912] ata6: SATA link down (SStatus 0 SControl 330)
[    2.923142] scsi 8:0:0:0: Direct-Access     ATA      OCZ-TRION150     12.2 PQ: 0 ANSI: 5
[    2.925046] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.925047] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    2.925057] sd 4:0:0:0: [sda] Write Protect is off
[    2.925059] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.925074] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.925094] sd 8:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.925102] sd 8:0:0:0: [sdb] Write Protect is off
[    2.925103] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.925113] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.938011]  sdb: sdb1 sdb2 sdb3
[    2.938218] sd 8:0:0:0: [sdb] Attached SCSI disk
[    2.970978]  sda: sda1 sda2
[    2.971244] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.130510] usb 1-10: New USB device found, idVendor=b58e, idProduct=9e84, bcdDevice= 1.00
[    3.130512] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.130513] usb 1-10: Product: Yeti Stereo Microphone
[    3.130514] usb 1-10: Manufacturer: Blue Microphones
[    3.130515] usb 1-10: SerialNumber: REV8
[    3.151377] input: Blue Microphones Yeti Stereo Microphone Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.3/0003:B58E:9E84.0008/input/input13
[    3.206198] hid-generic 0003:B58E:9E84.0008: input,hiddev1,hidraw5: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:03:00.0-10/input3
[    3.396541] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.397642] ata10.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    3.397643] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.398617] ata10.00: configured for UDMA/133
[    3.398769] scsi 9:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    3.398945] sd 9:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.398946] sd 9:0:0:0: [sdc] 4096-byte physical blocks
[    3.398954] sd 9:0:0:0: [sdc] Write Protect is off
[    3.398956] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.398969] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.448886]  sdc: sdc1 sdc2
[    3.449142] sd 9:0:0:0: [sdc] Attached SCSI disk
[    3.467098] random: fast init done
[    3.662093] PM: Image not found (code -22)
[    3.673134] fbcon: Taking over console
[    3.673222] Console: switching to colour frame buffer device 240x67
[    3.724345] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.853866] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.869788] systemd[1]: Detected architecture x86-64.
[    3.879009] systemd[1]: Set hostname to <xfceman>.
[    3.980195] random: systemd: uninitialized urandom read (16 bytes read)
[    3.980203] systemd[1]: Reached target Login Prompts.
[    3.980237] random: systemd: uninitialized urandom read (16 bytes read)
[    3.980259] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.980263] random: systemd: uninitialized urandom read (16 bytes read)
[    3.980481] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.980536] systemd[1]: Listening on Journal Socket.
[    3.982597] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.982648] systemd[1]: Listening on udev Kernel Socket.
[    3.982819] systemd[1]: Created slice User and Session Slice.
[    3.994875] vboxdrv: loading out-of-tree module taints kernel.
[    3.995030] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.998384] vboxdrv: Found 12 processor cores
[    4.003039] audit: type=1130 audit(1542853964.539:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.011102] audit: type=1130 audit(1542853964.546:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.016261] vboxdrv: TSC mode is Invariant, tentative frequency 3892682866 Hz
[    4.016262] vboxdrv: Successfully loaded version 5.2.22 (interface 0x00290001)
[    4.016962] VBoxNetAdp: Successfully started.
[    4.017822] VBoxNetFlt: Successfully started.
[    4.018654] VBoxPciLinuxInit
[    4.018657] vboxpci: IOMMU found
[    4.026645] audit: type=1130 audit(1542853964.562:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.032597] audit: type=1130 audit(1542853964.566:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.034986] audit: type=1130 audit(1542853964.569:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.047616] audit: type=1325 audit(1542853964.582:7): table=filter family=2 entries=0
[    4.047915] audit: type=1300 audit(1542853964.582:7): arch=c000003e syscall=175 success=yes exit=0 a0=558079dff8b0 a1=2669 a2=5580785bfde6 a3=558079dfb010 items=0 ppid=265 pid=373 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[    4.047917] audit: type=1327 audit(1542853964.582:7): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[    4.052415] audit: type=1130 audit(1542853964.586:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.114554] systemd-journald[357]: Received request to flush runtime journal from PID 1
[    4.254339] acpi_cpufreq: overriding BIOS provided _PSD data
[    4.284268] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.284270] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.287372] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[    4.287831] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.287904] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.287914] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.292040] input: PC Speaker as /devices/platform/pcspkr/input/input15
[    4.302580] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    4.302584] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    4.310976] cryptd: max_cpu_qlen set to 1000
[    4.314757] ccp 0000:27:00.2: ccp enabled
[    4.314806] ccp 0000:27:00.2: psp enabled
[    4.314807] ccp 0000:27:00.2: enabled
[    4.322354] AVX2 version of gcm_enc/dec engaged.
[    4.322355] AES CTR mode by8 optimization enabled
[    4.329369] Linux agpgart interface v0.103
[    4.349054] r8168 0000:25:00.0 enp37s0: renamed from eth0
[    4.365644] mousedev: PS/2 mouse device common for all mice
[    4.382197] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    4.382199] snd_hda_intel 0000:26:00.1: Force to non-snoop mode
[    4.396195] random: crng init done
[    4.396196] random: 7 urandom warning(s) missed due to ratelimiting
[    4.398426] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input16
[    4.398472] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input17
[    4.398512] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input18
[    4.398553] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input19
[    4.398595] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input20
[    4.398632] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input21
[    4.478372] usb 1-6: current rate 30464 is different from the runtime rate 96000
[    4.517396] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[    4.517399] usb 1-6: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
[    4.541428] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[    4.541432] usb 1-6: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
[    4.603436] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[    4.603440] usb 1-6: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
[    4.627445] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[    4.627449] usb 1-6: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
[    4.630814] Adding 3071996k swap on /dev/sdb2.  Priority:-2 extents:1 across:3071996k SSDscFS
[    4.639283] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.639285] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.639287] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.639288] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.639289] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.639291] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.639292] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.639293] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.652716] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input22
[    4.652761] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input23
[    4.652823] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input24
[    4.652873] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input25
[    4.652913] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input26
[    4.656334] fuse init (API version 7.27)
[    4.656459] Bluetooth: Core ver 2.22
[    4.656490] NET: Registered protocol family 31
[    4.656492] Bluetooth: HCI device and connection manager initialized
[    4.656497] Bluetooth: HCI socket layer initialized
[    4.656500] Bluetooth: L2CAP socket layer initialized
[    4.656510] Bluetooth: SCO socket layer initialized
[    4.659398] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[    4.659400] usb 1-6: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
[    4.666895] usbcore: registered new interface driver btusb
[    4.673346] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard
[    4.694341] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.772984] [drm] amdgpu kernel modesetting enabled.
[    4.777175] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    4.787638] Parsing CRAT table with 1 nodes
[    4.787643] Ignoring ACPI CRAT on non-APU system
[    4.787644] Virtual CRAT table created for CPU
[    4.787645] Parsing CRAT table with 1 nodes
[    4.787645] Creating topology SYSFS entries
[    4.787662] Topology: Add CPU node
[    4.787662] Finished initializing topology
[    4.787699] kfd kfd: Initialized module
[    4.787886] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    4.787887] fb: switching to amdgpudrmfb from VESA VGA
[    4.787902] Console: switching to colour dummy device 80x25
[    4.788114] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F0 0xEF).
[    4.788123] [drm] register mmio base: 0xFE900000
[    4.788123] [drm] register mmio size: 262144
[    4.788130] [drm] add ip block number 0 <vi_common>
[    4.788131] [drm] add ip block number 1 <gmc_v8_0>
[    4.788131] [drm] add ip block number 2 <tonga_ih>
[    4.788132] [drm] add ip block number 3 <powerplay>
[    4.788132] [drm] add ip block number 4 <dm>
[    4.788133] [drm] add ip block number 5 <gfx_v8_0>
[    4.788134] [drm] add ip block number 6 <sdma_v3_0>
[    4.788134] [drm] add ip block number 7 <uvd_v6_0>
[    4.788135] [drm] add ip block number 8 <vce_v3_0>
[    4.788144] [drm] UVD is enabled in VM mode
[    4.788144] [drm] UVD ENC is enabled in VM mode
[    4.788146] [drm] VCE enabled in VM mode
[    4.788323] amdgpu 0000:26:00.0: No more image in the PCI ROM
[    4.788337] ATOM BIOS: xxx-xxx-xxx
[    4.788359] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.790850] amdgpu 0000:26:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    4.790851] amdgpu 0000:26:00.0: GART: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[    4.790856] [drm] Detected VRAM RAM=4096M, BAR=256M
[    4.790856] [drm] RAM width 256bits GDDR5
[    4.790889] [TTM] Zone  kernel: Available graphics memory: 8210216 kiB
[    4.790889] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    4.790890] [TTM] Initializing pool allocator
[    4.790892] [TTM] Initializing DMA pool allocator
[    4.790910] [drm] amdgpu: 4096M of VRAM memory ready
[    4.790910] [drm] amdgpu: 4096M of GTT memory ready.
[    4.790917] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.790978] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000).
[    4.792090] [drm] Chained IB support enabled!
[    4.799785] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.801351] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.860676] amdgpu: [powerplay] Failed to retrieve minimum clocks.
[    4.860677] amdgpu: [powerplay] Error in phm_get_clock_info 
[    4.860725] [drm] DM_PPLIB: values for Engine clock
[    4.860725] [drm] DM_PPLIB:	 300000
[    4.860725] [drm] DM_PPLIB:	 588000
[    4.860726] [drm] DM_PPLIB:	 952000
[    4.860726] [drm] DM_PPLIB:	 1041000
[    4.860726] [drm] DM_PPLIB:	 1106000
[    4.860727] [drm] DM_PPLIB:	 1168000
[    4.860727] [drm] DM_PPLIB:	 1209000
[    4.860727] [drm] DM_PPLIB:	 1280000
[    4.860728] [drm] DM_PPLIB: Validation clocks:
[    4.860728] [drm] DM_PPLIB:    engine_max_clock: 128000
[    4.860728] [drm] DM_PPLIB:    memory_max_clock: 175000
[    4.860728] [drm] DM_PPLIB:    level           : 8
[    4.860729] [drm] DM_PPLIB: values for Memory clock
[    4.860729] [drm] DM_PPLIB:	 300000
[    4.860730] [drm] DM_PPLIB:	 1000000
[    4.860730] [drm] DM_PPLIB:	 1750000
[    4.860730] [drm] DM_PPLIB: Validation clocks:
[    4.860731] [drm] DM_PPLIB:    engine_max_clock: 128000
[    4.860731] [drm] DM_PPLIB:    memory_max_clock: 175000
[    4.860731] [drm] DM_PPLIB:    level           : 8
[    4.879524] [drm] Display Core initialized with v3.1.59!
[    4.896555] usbcore: registered new interface driver snd-usb-audio
[    4.904821] [drm] SADs count is: 0, don't need to read it
[    4.904910] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.904910] [drm] Driver supports precise vblank timestamp query.
[    4.934159] [drm] UVD and UVD ENC initialized successfully.
[    4.974261] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.974262] Bluetooth: BNEP filters: protocol multicast
[    4.974264] Bluetooth: BNEP socket layer initialized
[    5.035106] [drm] VCE initialized successfully.
[    5.035965] kfd kfd: Allocated 3969056 bytes on gart
[    5.035978] Virtual CRAT table created for GPU
[    5.035978] Parsing CRAT table with 1 nodes
[    5.035986] Creating topology SYSFS entries
[    5.036041] Topology: Add dGPU node [0x67df:0x1002]
[    5.036094] kfd kfd: added device 1002:67df
[    5.037676] [drm] fb mappable at 0xE0D11000
[    5.037677] [drm] vram apper at 0xE0000000
[    5.037677] [drm] size 8294400
[    5.037677] [drm] fb depth is 24
[    5.037678] [drm]    pitch is 7680
[    5.037721] fbcon: amdgpudrmfb (fb0) is primary device
[    5.073710] Console: switching to colour frame buffer device 240x67
[    5.077081] amdgpu 0000:26:00.0: fb0: amdgpudrmfb frame buffer device
[    5.097240] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:26:00.0 on minor 0
[    5.201976] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[    5.202368] enp37s0: 0xffff9dbdc1ad1000, 70:85:c2:a2:9a:48, IRQ 63
[    5.260404] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[    7.152046] kauditd_printk_skb: 105 callbacks suppressed
[    7.152047] audit: type=1130 audit(1542853967.686:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.162254] audit: type=1006 audit(1542853967.696:73): pid=1006 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[    7.200551] audit: type=1130 audit(1542853967.736:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.991404] audit: type=1130 audit(1542853968.526:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.334472] r8168: enp37s0: link up
[    9.334536] IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
[    9.483194] ccp 0000:27:00.2: sev command 0x4 timed out, disabling PSP 
[    9.483197] ccp 0000:27:00.2: SEV: failed to get status. Error: 0x0
[    9.490812] kvm: Nested Virtualization enabled
[    9.490817] kvm: Nested Paging enabled
[    9.490817] SVM: Virtual VMLOAD VMSAVE supported
[    9.490818] SVM: Virtual GIF supported
[    9.494058] MCE: In-kernel MCE decoding enabled.
[    9.497318] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.497319] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.550683] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.550684] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.616924] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.616925] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.663216] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.663217] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.764295] audit: type=1131 audit(1542853970.299:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.562599] logitech-hidpp-device 0003:046D:2011.0005: HID++ 1.0 device connected.
[   13.945685] audit: type=1006 audit(1542853974.479:77): pid=1101 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   13.953781] audit: type=1130 audit(1542853974.489:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.959297] audit: type=1006 audit(1542853974.492:79): pid=1143 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   13.973080] audit: type=1131 audit(1542853974.509:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.992081] audit: type=1130 audit(1542853974.526:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.992711] audit: type=1131 audit(1542853974.526:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.384544] audit: type=1130 audit(1542853974.919:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.561003] audit: type=1130 audit(1542853975.096:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.568717] audit: type=1131 audit(1542853975.102:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.705710] audit: type=1325 audit(1542853975.239:86): table=filter family=2 entries=135
[   14.978874] Bluetooth: RFCOMM TTY layer initialized
[   14.978877] Bluetooth: RFCOMM socket layer initialized
[   14.978880] Bluetooth: RFCOMM ver 1.11
[   16.246155] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   16.256489] ata10.00: configured for UDMA/133
[   20.885908] logitech-hidpp-device 0003:046D:400A.0006: HID++ 2.0 device connected.
[   22.123390] kauditd_printk_skb: 64 callbacks suppressed
[   22.123391] audit: type=1325 audit(1542853982.659:109): table=filter family=10 entries=176
[   22.123407] audit: type=1300 audit(1542853982.659:109): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=55f7a9df15f0 items=0 ppid=1825 pid=1831 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="ip6tables" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   22.123409] audit: type=1327 audit(1542853982.659:109): proctitle=2F7362696E2F6970367461626C6573002D2D6E65772D636861696E005049415F495056364C45414B5F4F55545055545F52554C4553
[   22.125380] audit: type=1325 audit(1542853982.659:110): table=filter family=10 entries=178
[   22.125413] audit: type=1300 audit(1542853982.659:110): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=557888a34010 items=0 ppid=1825 pid=1834 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="ip6tables" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   22.125415] audit: type=1327 audit(1542853982.659:110): proctitle=2F7362696E2F6970367461626C6573002D2D617070656E64005049415F495056364C45414B5F4F55545055545F52554C4553002D2D6A756D700044524F50
[   22.127066] audit: type=1325 audit(1542853982.662:111): table=filter family=10 entries=179
[   22.127086] audit: type=1300 audit(1542853982.662:111): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=55a6d5ed7200 items=0 ppid=1825 pid=1837 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="ip6tables" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   22.127088] audit: type=1327 audit(1542853982.662:111): proctitle=2F7362696E2F6970367461626C6573002D2D696E73657274004F5554505554002D2D6A756D70005049415F495056364C45414B5F4F55545055545F52554C4553
[   28.113313] tun: Universal TUN/TAP device driver, 1.6
[   28.140861] audit: type=1130 audit(1542853988.676:112): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.211099] audit: type=1131 audit(1542853995.746:113): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.073721] audit: type=1131 audit(1542853998.609:114): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

I’m gonna have to boot back into 4.14 for now. 4.19 with the screen glitches is pretty much unusable especially with Firefox.

I can re-boot into 4.19 to try different solutions.

Updating the BIOS might help … you have v 1.30 and there is v 1.50
In the two dmsg i can’t see anything obvious to explain the glitches …

2 Likes

Hello Bogdan, good to see you again.

Updated to BIOS v1.50. Took awhile because RAM timings of 14-15-15-15-34 caused the MoBo to freak out, and i had to clear CMOS, redo settings and.... never mind.

Now rebooted into 4.19 LTS. The glitching seems to have reduced somewhat when on desktop and dragging a window around.

However, with Firefox open and typing this reply, still glitching like a mofo, please excuse the language.

Latest outputs below. Any more suggestions would be most welcome.

$ inxi -Fxxxz

System:
Kernel: 4.19.2-1-MANJARO x86_64 bits: 64 
  compiler: gcc v: 8.2.1 Desktop: N/A wm: xfwm4 dm: LightDM 1.28.0 
  Distro: Manjaro Linux 
Machine:
  Type: Desktop Mobo: ASRock model: B450 Pro4 serial: <filter> 
  UEFI [Legacy]: American Megatrends v: P1.50 date: 11/05/2018 
Battery:
  Device-1: hidpp_battery_0 model: Logitech K520 serial: <filter> 
  charge: 70% (should be ignored) rechargeable: yes status: Discharging 
  Device-2: hidpp_battery_1 model: Logitech Wireless Mouse M325 
  serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
  status: Discharging 
CPU:
  Topology: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ 
  rev: 2 L2 cache: 3072 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 93464 
  Speed: 2966 MHz min/max: 1550/3900 MHz boost: enabled Core speeds (MHz): 
  1: 2966 2: 3192 3: 2308 4: 1998 5: 2221 6: 2319 7: 1865 8: 3000 9: 2496 
  10: 3824 11: 3661 12: 3821 
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X] 
  vendor: Gigabyte driver: amdgpu v: kernel bus ID: 26:00.0 
  chip ID: 1002:67df 
  Display: x11 server: X.org 1.20.3 driver: amdgpu,ati unloaded: modesetting 
  alternate: fbdev,vesa resolution: <xdpyinfo missing> 
  OpenGL: renderer: Radeon RX 570 Series (POLARIS10 DRM 3.27.0 
  4.19.2-1-MANJARO LLVM 7.0.0) 
  v: 4.5 Mesa 18.2.5 compat-v: 4.4 direct render: Yes 
Audio:
  Device-1: AMD Ellesmere [Radeon RX 580] vendor: Gigabyte 
  driver: snd_hda_intel v: kernel bus ID: 26:00.1 chip ID: 1002:aaf0 
  Device-2: AMD Family 17h HD Audio vendor: ASRock driver: snd_hda_intel 
  v: kernel bus ID: 28:00.3 chip ID: 1022:1457 
  Device-3: Blue Microphones Yeti Stereo Microphone type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-10:3 chip ID: b58e:9e84 
  serial: <filter> 
  Device-4: C-Media CM106 Like Sound Device type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus ID: 1-6:4 chip ID: 0d8c:0102 
  Sound Server: ALSA v: k4.19.2-1-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASRock driver: r8168 v: 8.045.08-NAPI port: d000 bus ID: 25:00.0 
  chip ID: 10ec:8168 
  IF: enp37s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:
  Local Storage: total: 3.86 TiB used: 2.01 TiB (52.0%) 
  ID-1: /dev/sda vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB 
  speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC29 scheme: GPT 
  ID-2: /dev/sdb vendor: OCZ model: TRION150 size: 223.57 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: 12.2 scheme: GPT 
  ID-3: /dev/sdc vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB 
  speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC29 scheme: GPT 
Partition:
  ID-1: / size: 43.00 GiB used: 14.73 GiB (34.3%) fs: ext4 dev: /dev/sdb1 
  ID-2: /home size: 172.92 GiB used: 106.78 GiB (61.8%) fs: ext4 
  dev: /dev/sdb3 
  ID-3: swap-1 size: 2.93 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb2 
Sensors:
  System Temperatures: cpu: 38.4 C mobo: N/A gpu: amdgpu temp: 36 C 
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 749 
Info:
  Processes: 325 Uptime: 2m Memory: 15.66 GiB used: 2.00 GiB (12.8%) 
  Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23 
  running in: xfce4-terminal inxi: 3.0.27

$ dmesg

[    0.000000] Linux version 4.19.2-1-MANJARO (builduser@development) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Tue Nov 13 22:35:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=43f68119-e94a-4d75-9145-c9f6cfe36844 rw quiet resume=UUID=a365dd42-bbe0-4f8a-b262-024a3d241626
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a209fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20a000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dae20fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dae21000-0x00000000dc30cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dc30d000-0x00000000dc401fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc402000-0x00000000dc7d8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc7d9000-0x00000000dd23ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd240000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Pro4, BIOS P1.50 11/05/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3892.666 MHz processor
[    0.000795] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000796] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000803] last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[    0.000806] MTRR default type: uncachable
[    0.000807] MTRR fixed ranges enabled:
[    0.000807]   00000-9FFFF write-back
[    0.000808]   A0000-BFFFF write-through
[    0.000809]   C0000-FFFFF write-protect
[    0.000809] MTRR variable ranges enabled:
[    0.000810]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000811]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000812]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000813]   3 disabled
[    0.000813]   4 disabled
[    0.000814]   5 disabled
[    0.000814]   6 disabled
[    0.000814]   7 disabled
[    0.000815] TOM2: 0000000420000000 aka 16896M
[    0.001077] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001156] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001161] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.004541] Scanning 1 areas for low memory corruption
[    0.004542] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.004544] Using GB pages for direct mapping
[    0.004546] BRK [0x85c01000, 0x85c01fff] PGTABLE
[    0.004547] BRK [0x85c02000, 0x85c02fff] PGTABLE
[    0.004548] BRK [0x85c03000, 0x85c03fff] PGTABLE
[    0.004572] BRK [0x85c04000, 0x85c04fff] PGTABLE
[    0.004574] BRK [0x85c05000, 0x85c05fff] PGTABLE
[    0.004679] BRK [0x85c06000, 0x85c06fff] PGTABLE
[    0.004731] BRK [0x85c07000, 0x85c07fff] PGTABLE
[    0.004903] BRK [0x85c08000, 0x85c08fff] PGTABLE
[    0.004905] BRK [0x85c09000, 0x85c09fff] PGTABLE
[    0.004961] BRK [0x85c0a000, 0x85c0afff] PGTABLE
[    0.005028] BRK [0x85c0b000, 0x85c0bfff] PGTABLE
[    0.005064] RAMDISK: [mem 0x36cd3000-0x37660fff]
[    0.005068] ACPI: Early table checksum verification disabled
[    0.005095] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.005098] ACPI: XSDT 0x00000000DC402098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005102] ACPI: FACP 0x00000000DC408648 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.005105] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
[    0.005108] ACPI: DSDT 0x00000000DC4021E8 00645B (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.005111] ACPI: FACS 0x00000000DC7C1E00 000040
[    0.005113] ACPI: APIC 0x00000000DC408760 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.005115] ACPI: FPDT 0x00000000DC408840 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005117] ACPI: FIDT 0x00000000DC408888 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005120] ACPI: SSDT 0x00000000DC408928 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.005122] ACPI: SSDT 0x00000000DC4115C0 001A58 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.005124] ACPI: CRAT 0x00000000DC413018 000BD0 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.005126] ACPI: CDIT 0x00000000DC413BE8 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.005128] ACPI: SSDT 0x00000000DC413C18 002C36 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.005130] ACPI: MCFG 0x00000000DC416850 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.005133] ACPI: AAFT 0x00000000DC416890 00030C (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.005135] ACPI: HPET 0x00000000DC416BA0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.005137] ACPI: SSDT 0x00000000DC416BD8 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.005139] ACPI: UEFI 0x00000000DC416C00 000048 (v01                 00000000      00000000)
[    0.005141] ACPI: IVRS 0x00000000DC416C48 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.005143] ACPI: SSDT 0x00000000DC416D18 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.005145] ACPI: SSDT 0x00000000DC418760 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.005147] ACPI: WSMT 0x00000000DC418858 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.005153] ACPI: Local APIC address 0xfee00000
[    0.005492] No NUMA configuration found
[    0.005492] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[    0.005495] NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
[    0.005515] Zone ranges:
[    0.005515]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005516]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005517]   Normal   [mem 0x0000000100000000-0x000000041f37ffff]
[    0.005518]   Device   empty
[    0.005519] Movable zone start for each node
[    0.005519] Early memory node ranges
[    0.005520]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.005520]   node   0: [mem 0x0000000000100000-0x0000000009cfffff]
[    0.005521]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.005521]   node   0: [mem 0x000000000a20a000-0x000000000affffff]
[    0.005521]   node   0: [mem 0x000000000b020000-0x00000000dae20fff]
[    0.005522]   node   0: [mem 0x00000000dc30d000-0x00000000dc401fff]
[    0.005522]   node   0: [mem 0x00000000dd240000-0x00000000deffffff]
[    0.005523]   node   0: [mem 0x0000000100000000-0x000000041f37ffff]
[    0.005676] Reserved but unavailable: 14008 pages
[    0.005677] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[    0.005678] On node 0 totalpages: 4177096
[    0.005679]   DMA zone: 64 pages used for memmap
[    0.005679]   DMA zone: 21 pages reserved
[    0.005680]   DMA zone: 3996 pages, LIFO batch:0
[    0.005736]   DMA32 zone: 14055 pages used for memmap
[    0.005737]   DMA32 zone: 899500 pages, LIFO batch:63
[    0.018469]   Normal zone: 51150 pages used for memmap
[    0.018470]   Normal zone: 3273600 pages, LIFO batch:63
[    0.063960] ACPI: PM-Timer IO Port: 0x808
[    0.063963] ACPI: Local APIC address 0xfee00000
[    0.063968] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.063984] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[    0.063988] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[    0.063989] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.063990] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.063991] ACPI: IRQ0 used by override.
[    0.063992] ACPI: IRQ9 used by override.
[    0.063993] Using ACPI (MADT) for SMP configuration information
[    0.063994] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.063998] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.064017] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.064019] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.064019] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.064019] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.064020] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.064021] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
[    0.064022] PM: Registered nosave memory: [mem 0x0a200000-0x0a209fff]
[    0.064023] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.064024] PM: Registered nosave memory: [mem 0xdae21000-0xdc30cfff]
[    0.064025] PM: Registered nosave memory: [mem 0xdc402000-0xdc7d8fff]
[    0.064025] PM: Registered nosave memory: [mem 0xdc7d9000-0xdd23ffff]
[    0.064027] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.064027] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.064027] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.064028] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[    0.064028] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[    0.064028] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.064029] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.064029] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.064030] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.064030] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.064030] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.064031] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.064031] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.064032] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.064032] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.064032] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.064033] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.064033] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.064034] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.064034] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.064034] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.064035] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.064035] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.064037] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.064037] Booting paravirtualized kernel on bare hardware
[    0.064040] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.152438] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.152444] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.152915] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.152920] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.152921] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.152939] Built 1 zonelists, mobility grouping on.  Total pages: 4111806
[    0.152940] Policy zone: Normal
[    0.152941] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=43f68119-e94a-4d75-9145-c9f6cfe36844 rw quiet resume=UUID=a365dd42-bbe0-4f8a-b262-024a3d241626
[    0.158336] Calgary: detecting Calgary via BIOS EBDA area
[    0.158337] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.183173] Memory: 16338652K/16708384K available (12300K kernel code, 1383K rwdata, 3688K rodata, 1536K init, 3804K bss, 369732K reserved, 0K cma-reserved)
[    0.183283] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.183289] ftrace: allocating 36074 entries in 141 pages
[    0.193216] rcu: Preemptible hierarchical RCU implementation.
[    0.193217] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.193217] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.193218] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.193218] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.193218] 	Tasks RCU enabled.
[    0.193219] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.194395] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[    0.194546] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.194612] spurious 8259A interrupt: IRQ7.
[    0.194627] Console: colour dummy device 80x25
[    0.194630] console [tty0] enabled
[    0.194643] ACPI: Core revision 20180810
[    0.194798] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.194822] hpet clockevent registered
[    0.194825] APIC: Switch to symmetric I/O mode setup
[    0.263463] Switched APIC routing to physical flat.
[    0.264214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.278159] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x703893f650f, max_idle_ns: 881590884615 ns
[    0.278166] Calibrating delay loop (skipped), value calculated using timer frequency.. 7788.72 BogoMIPS (lpj=12975553)
[    0.278167] pid_max: default: 32768 minimum: 301
[    0.278208] Security Framework initialized
[    0.278209] Yama: becoming mindful.
[    0.278211] AppArmor: AppArmor disabled by boot time parameter
[    0.280014] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.280979] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.281022] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.281054] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.281238] mce: CPU supports 23 MCE banks
[    0.281253] LVT offset 1 assigned for vector 0xf9
[    0.281312] LVT offset 2 assigned for vector 0xf4
[    0.281321] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.281322] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.281323] Spectre V2 : Mitigation: Full AMD retpoline
[    0.281324] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.281324] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.281325] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.285269] Freeing SMP alternatives memory: 28K
[    0.291493] smpboot: CPU0: AMD Ryzen 5 2600 Six-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.308168] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.308172] ... version:                0
[    0.308173] ... bit width:              48
[    0.308173] ... generic registers:      6
[    0.308174] ... value mask:             0000ffffffffffff
[    0.308174] ... max period:             00007fffffffffff
[    0.308174] ... fixed-purpose events:   0
[    0.308175] ... event mask:             000000000000003f
[    0.314831] rcu: Hierarchical SRCU implementation.
[    0.338172] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.344837] smp: Bringing up secondary CPUs ...
[    0.384839] x86: Booting SMP configuration:
[    0.384841] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.786968] smp: Brought up 1 node, 12 CPUs
[    0.786968] smpboot: Max logical packages: 2
[    0.786968] smpboot: Total of 12 processors activated (93461.64 BogoMIPS)
[    0.788237] devtmpfs: initialized
[    0.788237] x86/mm: Memory block size: 128MB
[    0.788962] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a209fff] (40960 bytes)
[    0.788962] PM: Registering ACPI NVS region [mem 0xdc402000-0xdc7d8fff] (4026368 bytes)
[    0.788962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.788962] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.788962] pinctrl core: initialized pinctrl subsystem
[    0.788962] RTC time:  9:10:42, date: 11/22/18
[    0.788962] NET: Registered protocol family 16
[    0.788962] audit: initializing netlink subsys (disabled)
[    0.788962] audit: type=2000 audit(1542877842.529:1): state=initialized audit_enabled=0 res=1
[    0.788962] cpuidle: using governor ladder
[    0.788962] cpuidle: using governor menu
[    0.788962] ACPI: bus type PCI registered
[    0.788962] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.788962] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.788962] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.788962] PCI: Using configuration type 1 for base access
[    0.788962] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.788962] mtrr: probably your BIOS does not setup all CPUs.
[    0.788962] mtrr: corrected configuration.
[    0.788962] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.788962] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.788962] ACPI: Added _OSI(Module Device)
[    0.788962] ACPI: Added _OSI(Processor Device)
[    0.788962] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.788962] ACPI: Added _OSI(Processor Aggregator Device)
[    0.788962] ACPI: Added _OSI(Linux-Dell-Video)
[    0.788962] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.799387] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.801912] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.804763] ACPI: Interpreter enabled
[    0.804775] ACPI: (supports S0 S3 S4 S5)
[    0.804776] ACPI: Using IOAPIC for interrupt routing
[    0.805036] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.805280] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.812287] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.812291] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.812439] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.812581] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.812589] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.812899] PCI host bridge to bus 0000:00
[    0.812901] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.812902] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.812903] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.812904] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.812905] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.812905] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.812906] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.812907] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.812908] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.812913] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.812985] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.813075] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.813140] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.813247] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.813338] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.813414] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.813475] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.813576] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.813671] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.813751] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.813812] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.813838] pci 0000:00:07.1: enabling Extended Tags
[    0.813912] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.814246] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.814306] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.814334] pci 0000:00:08.1: enabling Extended Tags
[    0.814410] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.814538] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.814752] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.814970] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.815020] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.815072] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.815123] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.815172] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.815222] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.815272] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.815322] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.815458] pci 0000:03:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.815479] pci 0000:03:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
[    0.815554] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.815623] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.815666] pci 0000:03:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
[    0.815673] pci 0000:03:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
[    0.815709] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.815759] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.815827] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.815903] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.815906] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.815908] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.815994] pci 0000:1d:00.0: [1022:43c7] type 01 class 0x060400
[    0.816075] pci 0000:1d:00.0: PME# supported from D3hot D3cold
[    0.816141] pci 0000:1d:01.0: [1022:43c7] type 01 class 0x060400
[    0.816221] pci 0000:1d:01.0: PME# supported from D3hot D3cold
[    0.816287] pci 0000:1d:04.0: [1022:43c7] type 01 class 0x060400
[    0.816367] pci 0000:1d:04.0: PME# supported from D3hot D3cold
[    0.816434] pci 0000:1d:05.0: [1022:43c7] type 01 class 0x060400
[    0.816514] pci 0000:1d:05.0: PME# supported from D3hot D3cold
[    0.816581] pci 0000:1d:06.0: [1022:43c7] type 01 class 0x060400
[    0.816661] pci 0000:1d:06.0: PME# supported from D3hot D3cold
[    0.816728] pci 0000:1d:07.0: [1022:43c7] type 01 class 0x060400
[    0.816808] pci 0000:1d:07.0: PME# supported from D3hot D3cold
[    0.816886] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.816890] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.816893] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.816925] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.816964] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.817008] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.817046] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.817099] pci 0000:24:00.0: [1b21:0612] type 00 class 0x010601
[    0.817126] pci 0000:24:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.817138] pci 0000:24:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.817150] pci 0000:24:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.817161] pci 0000:24:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.817173] pci 0000:24:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.817184] pci 0000:24:00.0: reg 0x24: [mem 0xfe600000-0xfe6001ff]
[    0.817291] pci 0000:24:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:1d:06.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.817348] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.817352] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.817355] pci 0000:1d:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.817406] pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
[    0.817445] pci 0000:25:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.817480] pci 0000:25:00.0: reg 0x18: [mem 0xfe504000-0xfe504fff 64bit]
[    0.817501] pci 0000:25:00.0: reg 0x20: [mem 0xfe500000-0xfe503fff 64bit]
[    0.817625] pci 0000:25:00.0: supports D1 D2
[    0.817626] pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.817787] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.817791] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.817794] pci 0000:1d:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.817885] pci 0000:26:00.0: [1002:67df] type 00 class 0x030000
[    0.817907] pci 0000:26:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.817915] pci 0000:26:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.817920] pci 0000:26:00.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.817926] pci 0000:26:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
[    0.817931] pci 0000:26:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
[    0.817981] pci 0000:26:00.0: supports D1 D2
[    0.817982] pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.818057] pci 0000:26:00.1: [1002:aaf0] type 00 class 0x040300
[    0.818074] pci 0000:26:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
[    0.818134] pci 0000:26:00.1: supports D1 D2
[    0.818206] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.818208] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.818210] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.818212] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.818277] pci 0000:27:00.0: [1022:145a] type 00 class 0x130000
[    0.818307] pci 0000:27:00.0: enabling Extended Tags
[    0.818365] pci 0000:27:00.2: [1022:1456] type 00 class 0x108000
[    0.818381] pci 0000:27:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
[    0.818390] pci 0000:27:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
[    0.818397] pci 0000:27:00.2: enabling Extended Tags
[    0.818459] pci 0000:27:00.3: [1022:145f] type 00 class 0x0c0330
[    0.818470] pci 0000:27:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
[    0.818488] pci 0000:27:00.3: enabling Extended Tags
[    0.818514] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[    0.818565] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.818568] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.818634] pci 0000:28:00.0: [1022:1455] type 00 class 0x130000
[    0.818666] pci 0000:28:00.0: enabling Extended Tags
[    0.818729] pci 0000:28:00.2: [1022:7901] type 00 class 0x010601
[    0.818755] pci 0000:28:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
[    0.818761] pci 0000:28:00.2: enabling Extended Tags
[    0.818788] pci 0000:28:00.2: PME# supported from D3hot D3cold
[    0.818834] pci 0000:28:00.3: [1022:1457] type 00 class 0x040300
[    0.818844] pci 0000:28:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
[    0.818867] pci 0000:28:00.3: enabling Extended Tags
[    0.818891] pci 0000:28:00.3: PME# supported from D0 D3hot D3cold
[    0.818945] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.818948] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.819271] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.819325] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.819372] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.819430] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.819482] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.819525] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.819568] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.819611] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.821500] pci 0000:26:00.0: vgaarb: setting as boot VGA device
[    0.821502] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.821503] pci 0000:26:00.0: vgaarb: bridge control possible
[    0.821503] vgaarb: loaded
[    0.821593] ACPI: bus type USB registered
[    0.821601] usbcore: registered new interface driver usbfs
[    0.821605] usbcore: registered new interface driver hub
[    0.821628] usbcore: registered new device driver usb
[    0.821643] pps_core: LinuxPPS API ver. 1 registered
[    0.821643] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.821645] PTP clock support registered
[    0.821649] EDAC MC: Ver: 3.0.0
[    0.821726] PCI: Using ACPI for IRQ routing
[    0.822993] PCI: pci_cache_line_size set to 64 bytes
[    0.823050] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.823051] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[    0.823051] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.823052] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.823052] e820: reserve RAM buffer [mem 0xdae21000-0xdbffffff]
[    0.823053] e820: reserve RAM buffer [mem 0xdc402000-0xdfffffff]
[    0.823054] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.823054] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[    0.824828] NetLabel: Initializing
[    0.824828] NetLabel:  domain hash size = 128
[    0.824828] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.824828] NetLabel:  unlabeled traffic allowed by default
[    0.824854] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.824856] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.826874] clocksource: Switched to clocksource tsc-early
[    0.832083] VFS: Disk quotas dquot_6.6.0
[    0.832096] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.832146] pnp: PnP ACPI init
[    0.832247] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.832251] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.832308] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.832311] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.832377] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.832543] system 00:03: [io  0x0280-0x028f] has been reserved
[    0.832544] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.832545] system 00:03: [io  0x02a0-0x02af] has been reserved
[    0.832546] system 00:03: [io  0x02b0-0x02bf] has been reserved
[    0.832548] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.832763] pnp 00:04: [dma 0 disabled]
[    0.832792] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.833007] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.833008] system 00:05: [io  0x040b] has been reserved
[    0.833009] system 00:05: [io  0x04d6] has been reserved
[    0.833010] system 00:05: [io  0x0c00-0x0c01] has been reserved
[    0.833011] system 00:05: [io  0x0c14] has been reserved
[    0.833012] system 00:05: [io  0x0c50-0x0c51] has been reserved
[    0.833013] system 00:05: [io  0x0c52] has been reserved
[    0.833013] system 00:05: [io  0x0c6c] has been reserved
[    0.833014] system 00:05: [io  0x0c6f] has been reserved
[    0.833015] system 00:05: [io  0x0cd0-0x0cd1] has been reserved
[    0.833016] system 00:05: [io  0x0cd2-0x0cd3] has been reserved
[    0.833017] system 00:05: [io  0x0cd4-0x0cd5] has been reserved
[    0.833018] system 00:05: [io  0x0cd6-0x0cd7] has been reserved
[    0.833019] system 00:05: [io  0x0cd8-0x0cdf] has been reserved
[    0.833020] system 00:05: [io  0x0800-0x089f] has been reserved
[    0.833021] system 00:05: [io  0x0b00-0x0b0f] has been reserved
[    0.833021] system 00:05: [io  0x0b20-0x0b3f] has been reserved
[    0.833022] system 00:05: [io  0x0900-0x090f] has been reserved
[    0.833023] system 00:05: [io  0x0910-0x091f] has been reserved
[    0.833025] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.833026] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.833027] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.833028] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.833029] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.833030] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.833031] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.833033] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.833401] pnp: PnP ACPI: found 6 devices
[    0.838854] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.838909] pci 0000:1d:00.0: PCI bridge to [bus 1e]
[    0.838919] pci 0000:1d:01.0: PCI bridge to [bus 1f]
[    0.838928] pci 0000:1d:04.0: PCI bridge to [bus 22]
[    0.838936] pci 0000:1d:05.0: PCI bridge to [bus 23]
[    0.838945] pci 0000:1d:06.0: PCI bridge to [bus 24]
[    0.838947] pci 0000:1d:06.0:   bridge window [io  0xe000-0xefff]
[    0.838950] pci 0000:1d:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.838956] pci 0000:1d:07.0: PCI bridge to [bus 25]
[    0.838958] pci 0000:1d:07.0:   bridge window [io  0xd000-0xdfff]
[    0.838961] pci 0000:1d:07.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.838967] pci 0000:03:00.2: PCI bridge to [bus 1d-25]
[    0.838969] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.838972] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.838978] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.838979] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.838981] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.838985] pci 0000:00:03.1: PCI bridge to [bus 26]
[    0.838986] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.838988] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.838989] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.838992] pci 0000:00:07.1: PCI bridge to [bus 27]
[    0.838994] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.838998] pci 0000:00:08.1: PCI bridge to [bus 28]
[    0.839000] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.839004] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.839005] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.839006] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.839007] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.839008] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.839009] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.839010] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.839010] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.839011] pci_bus 0000:03: resource 0 [io  0xd000-0xefff]
[    0.839012] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe7fffff]
[    0.839013] pci_bus 0000:1d: resource 0 [io  0xd000-0xefff]
[    0.839014] pci_bus 0000:1d: resource 1 [mem 0xfe500000-0xfe6fffff]
[    0.839015] pci_bus 0000:24: resource 0 [io  0xe000-0xefff]
[    0.839016] pci_bus 0000:24: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.839016] pci_bus 0000:25: resource 0 [io  0xd000-0xdfff]
[    0.839017] pci_bus 0000:25: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.839018] pci_bus 0000:26: resource 0 [io  0xf000-0xffff]
[    0.839019] pci_bus 0000:26: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.839020] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.839021] pci_bus 0000:27: resource 1 [mem 0xfe200000-0xfe4fffff]
[    0.839022] pci_bus 0000:28: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.839088] NET: Registered protocol family 2
[    0.844478] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.844510] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.844646] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.844748] TCP: Hash tables configured (established 131072 bind 65536)
[    0.844781] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.844814] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.844875] NET: Registered protocol family 1
[    0.844879] NET: Registered protocol family 44
[    0.845006] pci 0000:26:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.845011] pci 0000:26:00.1: Linked as a consumer to 0000:26:00.0
[    0.845101] PCI: CLS 64 bytes, default 64
[    0.845123] Unpacking initramfs...
[    0.926669] Freeing initrd memory: 9784K
[    0.926686] AMD-Vi: IOMMU performance counters supported
[    0.926922] iommu: Adding device 0000:00:01.0 to group 0
[    0.927013] iommu: Adding device 0000:00:01.3 to group 1
[    0.927096] iommu: Adding device 0000:00:02.0 to group 2
[    0.927190] iommu: Adding device 0000:00:03.0 to group 3
[    0.927270] iommu: Adding device 0000:00:03.1 to group 4
[    0.927356] iommu: Adding device 0000:00:04.0 to group 5
[    0.927439] iommu: Adding device 0000:00:07.0 to group 6
[    0.927527] iommu: Adding device 0000:00:07.1 to group 7
[    0.927608] iommu: Adding device 0000:00:08.0 to group 8
[    0.927694] iommu: Adding device 0000:00:08.1 to group 9
[    0.927779] iommu: Adding device 0000:00:14.0 to group 10
[    0.927791] iommu: Adding device 0000:00:14.3 to group 10
[    0.927898] iommu: Adding device 0000:00:18.0 to group 11
[    0.927911] iommu: Adding device 0000:00:18.1 to group 11
[    0.927922] iommu: Adding device 0000:00:18.2 to group 11
[    0.927935] iommu: Adding device 0000:00:18.3 to group 11
[    0.927947] iommu: Adding device 0000:00:18.4 to group 11
[    0.927958] iommu: Adding device 0000:00:18.5 to group 11
[    0.927969] iommu: Adding device 0000:00:18.6 to group 11
[    0.927981] iommu: Adding device 0000:00:18.7 to group 11
[    0.928084] iommu: Adding device 0000:03:00.0 to group 12
[    0.928103] iommu: Adding device 0000:03:00.1 to group 12
[    0.928123] iommu: Adding device 0000:03:00.2 to group 12
[    0.928133] iommu: Adding device 0000:1d:00.0 to group 12
[    0.928145] iommu: Adding device 0000:1d:01.0 to group 12
[    0.928155] iommu: Adding device 0000:1d:04.0 to group 12
[    0.928166] iommu: Adding device 0000:1d:05.0 to group 12
[    0.928176] iommu: Adding device 0000:1d:06.0 to group 12
[    0.928187] iommu: Adding device 0000:1d:07.0 to group 12
[    0.928199] iommu: Adding device 0000:24:00.0 to group 12
[    0.928218] iommu: Adding device 0000:25:00.0 to group 12
[    0.928324] iommu: Adding device 0000:26:00.0 to group 13
[    0.928340] iommu: Using direct mapping for device 0000:26:00.0
[    0.928362] iommu: Adding device 0000:26:00.1 to group 13
[    0.928409] iommu: Adding device 0000:27:00.0 to group 14
[    0.928489] iommu: Adding device 0000:27:00.2 to group 15
[    0.928569] iommu: Adding device 0000:27:00.3 to group 16
[    0.928664] iommu: Adding device 0000:28:00.0 to group 17
[    0.928748] iommu: Adding device 0000:28:00.2 to group 18
[    0.928840] iommu: Adding device 0000:28:00.3 to group 19
[    0.929058] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.929058] AMD-Vi: Extended features (0xf77ef22294ada):
[    0.929059]  PPR NX GT IA GA PC GA_vAPIC
[    0.929061] AMD-Vi: Interrupt remapping enabled
[    0.929061] AMD-Vi: virtual APIC enabled
[    0.929159] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.929938] amd_uncore: AMD NB counters detected
[    0.929941] amd_uncore: AMD LLC counters detected
[    0.930139] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.930171] Scanning for low memory corruption every 60 seconds
[    0.930597] Initialise system trusted keyrings
[    0.930606] Key type blacklist registered
[    0.930633] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.931369] zbud: loaded
[    0.931518] pstore: using zstd compression
[    0.932546] Key type asymmetric registered
[    0.932547] Asymmetric key parser 'x509' registered
[    0.932551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.932585] io scheduler noop registered
[    0.932585] io scheduler deadline registered
[    0.932602] io scheduler cfq registered (default)
[    0.932602] io scheduler mq-deadline registered
[    0.932603] io scheduler kyber registered
[    0.932619] io scheduler bfq registered
[    0.932633] io scheduler bfq-sq registered
[    0.932634] BFQ I/O-scheduler: v9 (with cgroups support)
[    0.932634] blkcg_policy_register: BLKCG_MAX_POLS too small
[    0.934284] pcieport 0000:00:01.3: AER enabled with IRQ 26
[    0.934298] pcieport 0000:00:03.1: AER enabled with IRQ 27
[    0.934310] pcieport 0000:00:07.1: AER enabled with IRQ 28
[    0.934322] pcieport 0000:00:08.1: AER enabled with IRQ 30
[    0.934330] pcieport 0000:00:01.3: Signaling PME with IRQ 26
[    0.934340] pcieport 0000:00:03.1: Signaling PME with IRQ 27
[    0.934350] pcieport 0000:00:07.1: Signaling PME with IRQ 28
[    0.934362] pcieport 0000:00:08.1: Signaling PME with IRQ 30
[    0.934381] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.934420] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.934421] vesafb: scrolling: redraw
[    0.934422] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.934433] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000725a1bff, using 8128k, total 8128k
[    0.934460] fbcon: Deferring console take-over
[    0.934460] fb0: VESA VGA frame buffer device
[    0.934505] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.934510] ACPI: Power Button [PWRB]
[    0.934537] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.934548] ACPI: Power Button [PWRF]
[    0.934606] Monitor-Mwait will be used to enter C-1 state
[    0.938132] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.959168] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.960216] usbcore: registered new interface driver usbserial_generic
[    0.960219] usbserial: USB Serial support registered for generic
[    0.960244] rtc_cmos 00:02: RTC can wake from S4
[    0.960486] rtc_cmos 00:02: registered as rtc0
[    0.960495] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.960607] ledtrig-cpu: registered to indicate activity on CPUs
[    0.960767] NET: Registered protocol family 10
[    0.962734] Segment Routing with IPv6
[    0.962745] NET: Registered protocol family 17
[    0.963160] RAS: Correctable Errors collector initialized.
[    0.963717] microcode: CPU0: patch_level=0x08008206
[    0.963721] microcode: CPU1: patch_level=0x08008206
[    0.963723] microcode: CPU2: patch_level=0x08008206
[    0.963727] microcode: CPU3: patch_level=0x08008206
[    0.963730] microcode: CPU4: patch_level=0x08008206
[    0.963733] microcode: CPU5: patch_level=0x08008206
[    0.963738] microcode: CPU6: patch_level=0x08008206
[    0.963743] microcode: CPU7: patch_level=0x08008206
[    0.963749] microcode: CPU8: patch_level=0x08008206
[    0.963754] microcode: CPU9: patch_level=0x08008206
[    0.963758] microcode: CPU10: patch_level=0x08008206
[    0.963763] microcode: CPU11: patch_level=0x08008206
[    0.963786] microcode: Microcode Update Driver: v2.2.
[    0.963794] sched_clock: Marking stable (900215178, 63568252)->(1113009749, -149226319)
[    0.963961] registered taskstats version 1
[    0.963966] Loading compiled-in X.509 certificates
[    0.965255] Loaded X.509 cert 'Build time autogenerated kernel key: 7f6e4b3182e05b628a0542b67232d36148044914'
[    0.965274] zswap: loaded using pool lzo/zbud
[    0.966954] Key type big_key registered
[    0.967192]   Magic number: 10:254:172
[    0.967222] acpi device:35: hash matches
[    0.967297] rtc_cmos 00:02: setting system clock to 2018-11-22 09:10:43 UTC (1542877843)
[    1.243029] Freeing unused decrypted memory: 2040K
[    1.450259] Freeing unused kernel image memory: 1536K
[    1.450261] Write protecting the kernel read-only data: 18432k
[    1.451383] Freeing unused kernel image memory: 2008K
[    1.451463] Freeing unused kernel image memory: 408K
[    1.458079] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.458082] Run /init as init process
[    1.507605] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.507610] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    1.509030] SCSI subsystem initialized
[    1.514965] libata version 3.00 loaded.
[    1.517103] ahci 0000:03:00.1: version 3.0
[    1.517238] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    1.517271] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    1.517272] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    1.517816] scsi host0: ahci
[    1.517903] scsi host1: ahci
[    1.517971] scsi host2: ahci
[    1.518034] scsi host3: ahci
[    1.518092] scsi host4: ahci
[    1.518145] scsi host5: ahci
[    1.518264] scsi host6: ahci
[    1.518323] scsi host7: ahci
[    1.518346] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 42
[    1.518348] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 42
[    1.518348] ata3: DUMMY
[    1.518348] ata4: DUMMY
[    1.518350] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 42
[    1.518351] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 42
[    1.518351] ata7: DUMMY
[    1.518352] ata8: DUMMY
[    1.518473] ahci 0000:24:00.0: SSS flag set, parallel bus scan disabled
[    1.518510] ahci 0000:24:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.518512] ahci 0000:24:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    1.518688] scsi host8: ahci
[    1.518752] scsi host9: ahci
[    1.518783] ata9: SATA max UDMA/133 abar m512@0xfe600000 port 0xfe600100 irq 43
[    1.518785] ata10: SATA max UDMA/133 abar m512@0xfe600000 port 0xfe600180 irq 43
[    1.518890] ahci 0000:28:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.518892] ahci 0000:28:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    1.519033] scsi host10: ahci
[    1.519062] ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 45
[    1.560500] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    1.560790] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.560791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.560792] usb usb1: Product: xHCI Host Controller
[    1.560793] usb usb1: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.560794] usb usb1: SerialNumber: 0000:03:00.0
[    1.560881] hub 1-0:1.0: USB hub found
[    1.560892] hub 1-0:1.0: 10 ports detected
[    1.561398] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.561401] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.561403] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[    1.561435] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.561449] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.561450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.561450] usb usb2: Product: xHCI Host Controller
[    1.561451] usb usb2: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.561452] usb usb2: SerialNumber: 0000:03:00.0
[    1.561522] hub 2-0:1.0: USB hub found
[    1.561531] hub 2-0:1.0: 4 ports detected
[    1.561954] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    1.561956] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 3
[    1.562043] xhci_hcd 0000:27:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    1.562261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.562262] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.562263] usb usb3: Product: xHCI Host Controller
[    1.562264] usb usb3: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.562264] usb usb3: SerialNumber: 0000:27:00.3
[    1.562326] hub 3-0:1.0: USB hub found
[    1.562331] hub 3-0:1.0: 4 ports detected
[    1.562451] xhci_hcd 0000:27:00.3: xHCI Host Controller
[    1.562453] xhci_hcd 0000:27:00.3: new USB bus registered, assigned bus number 4
[    1.562455] xhci_hcd 0000:27:00.3: Host supports USB 3.0  SuperSpeed
[    1.562464] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.562477] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.562478] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.562479] usb usb4: Product: xHCI Host Controller
[    1.562480] usb usb4: Manufacturer: Linux 4.19.2-1-MANJARO xhci-hcd
[    1.562480] usb usb4: SerialNumber: 0000:27:00.3
[    1.562537] hub 4-0:1.0: USB hub found
[    1.562542] hub 4-0:1.0: 4 ports detected
[    1.832737] ata1: SATA link down (SStatus 0 SControl 300)
[    1.832739] ata11: SATA link down (SStatus 0 SControl 300)
[    1.888547] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.891520] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    1.938550] tsc: Refined TSC clocksource calibration: 3892.683 MHz
[    1.938559] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7038b5c86cb, max_idle_ns: 881590801795 ns
[    1.938597] clocksource: Switched to clocksource tsc
[    1.991930] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.992085] ata9.00: ATA-9: OCZ-TRION150, SAFZ12.2, max UDMA/133
[    1.992086] ata9.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.992306] ata9.00: configured for UDMA/133
[    2.033598] usb 3-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    2.033600] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.033601] usb 3-2: Product: USB 2.0 Hub
[    2.074636] hub 3-2:1.0: USB hub found
[    2.074971] hub 3-2:1.0: 4 ports detected
[    2.145767] ata2: SATA link down (SStatus 0 SControl 300)
[    2.225392] usb 1-5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
[    2.225394] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.225396] usb 1-5: Product: USB Receiver
[    2.225397] usb 1-5: Manufacturer: Logitech
[    2.244536] hidraw: raw HID events driver (C) Jiri Kosina
[    2.295325] usbcore: registered new interface driver usbhid
[    2.295325] usbhid: USB HID core driver
[    2.297482] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-5/input2
[    2.364864] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    2.371529] usb 3-2.2: new full-speed USB device number 3 using xhci_hcd
[    2.411415] input: Logitech Unifying Device. Wireless PID:404c Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input2
[    2.411433] input: Logitech Unifying Device. Wireless PID:404c Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input3
[    2.411458] input: Logitech Unifying Device. Wireless PID:404c Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input4
[    2.411472] input: Logitech Unifying Device. Wireless PID:404c System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input5
[    2.411512] hid-generic 0003:046D:404C.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404c] on usb-0000:03:00.0-5:1
[    2.427248] input: Logitech K520 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:2011.0005/input/input9
[    2.485333] logitech-hidpp-device 0003:046D:2011.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:03:00.0-5:2
[    2.497114] usb 3-2.2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[    2.497116] usb 3-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.497117] usb 3-2.2: Product: CSR8510 A10
[    2.497197] input: Logitech M325 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:400A.0006/input/input10
[    2.512011] logitech-hidpp-device 0003:046D:400A.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.0-5:3
[    2.525270] input: Logitech K830 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:404C.0004/input/input11
[    2.525314] logitech-hidpp-device 0003:046D:404C.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K830] on usb-0000:03:00.0-5:1
[    2.614871] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.616060] ata5.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    2.616062] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.616939] ata5.00: configured for UDMA/133
[    2.617054] scsi 4:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    2.625467] usb 1-10: New USB device found, idVendor=b58e, idProduct=9e84, bcdDevice= 1.00
[    2.625469] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.625470] usb 1-10: Product: Yeti Stereo Microphone
[    2.625471] usb 1-10: Manufacturer: Blue Microphones
[    2.625472] usb 1-10: SerialNumber: REV8
[    2.645773] input: Blue Microphones Yeti Stereo Microphone Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/1-10:1.3/0003:B58E:9E84.0007/input/input12
[    2.701999] hid-generic 0003:B58E:9E84.0007: input,hiddev1,hidraw4: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:03:00.0-10/input3
[    2.928739] ata6: SATA link down (SStatus 0 SControl 330)
[    2.928987] scsi 8:0:0:0: Direct-Access     ATA      OCZ-TRION150     12.2 PQ: 0 ANSI: 5
[    2.930881] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.930882] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    2.930889] sd 4:0:0:0: [sda] Write Protect is off
[    2.930890] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.930901] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.930950] sd 8:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.930959] sd 8:0:0:0: [sdb] Write Protect is off
[    2.930960] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.930974] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.943821]  sdb: sdb1 sdb2 sdb3
[    2.944040] sd 8:0:0:0: [sdb] Attached SCSI disk
[    2.980377]  sda: sda1 sda2
[    2.980647] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.395225] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.396322] ata10.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[    3.396324] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.397215] ata10.00: configured for UDMA/133
[    3.397342] scsi 9:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[    3.397524] sd 9:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.397525] sd 9:0:0:0: [sdc] 4096-byte physical blocks
[    3.397532] sd 9:0:0:0: [sdc] Write Protect is off
[    3.397534] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.397547] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.446241]  sdc: sdc1 sdc2
[    3.446517] sd 9:0:0:0: [sdc] Attached SCSI disk
[    3.476276] random: fast init done
[    3.617458] PM: Image not found (code -22)
[    3.628641] fbcon: Taking over console
[    3.628730] Console: switching to colour frame buffer device 240x67
[    3.679540] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.818866] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.835210] systemd[1]: Detected architecture x86-64.
[    3.843802] systemd[1]: Set hostname to <xfceman>.
[    3.950670] random: systemd: uninitialized urandom read (16 bytes read)
[    3.950727] systemd[1]: Listening on Journal Socket.
[    3.950763] random: systemd: uninitialized urandom read (16 bytes read)
[    3.952927] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.952949] random: systemd: uninitialized urandom read (16 bytes read)
[    3.953083] systemd[1]: Created slice User and Session Slice.
[    3.953508] systemd[1]: Mounting Huge Pages File System...
[    3.953684] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.953724] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.953971] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.978201] vboxdrv: loading out-of-tree module taints kernel.
[    3.978336] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    3.979195] audit: type=1130 audit(1542877846.507:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.981205] vboxdrv: Found 12 processor cores
[    3.998513] vboxdrv: TSC mode is Invariant, tentative frequency 3892682888 Hz
[    3.998514] vboxdrv: Successfully loaded version 5.2.22 (interface 0x00290001)
[    3.999276] VBoxNetAdp: Successfully started.
[    4.000198] VBoxNetFlt: Successfully started.
[    4.001087] VBoxPciLinuxInit
[    4.001089] vboxpci: IOMMU found
[    4.004842] audit: type=1130 audit(1542877846.534:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.007253] audit: type=1130 audit(1542877846.534:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.013613] audit: type=1130 audit(1542877846.541:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.017123] audit: type=1130 audit(1542877846.544:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.029552] audit: type=1325 audit(1542877846.557:7): table=filter family=2 entries=0
[    4.029711] audit: type=1300 audit(1542877846.557:7): arch=c000003e syscall=175 success=yes exit=0 a0=55c68170c8b0 a1=2669 a2=55c67f9d5de6 a3=55c681708010 items=0 ppid=259 pid=368 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[    4.029713] audit: type=1327 audit(1542877846.557:7): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[    4.042413] audit: type=1130 audit(1542877846.571:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    4.050839] systemd-journald[356]: Received request to flush runtime journal from PID 1
[    4.184400] acpi_cpufreq: overriding BIOS provided _PSD data
[    4.219729] input: PC Speaker as /devices/platform/pcspkr/input/input14
[    4.220860] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.220862] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.223590] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    4.223666] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    4.223676] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    4.223911] cryptd: max_cpu_qlen set to 1000
[    4.231298] ccp 0000:27:00.2: ccp enabled
[    4.231344] ccp 0000:27:00.2: psp enabled
[    4.231345] ccp 0000:27:00.2: enabled
[    4.245802] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[    4.252944] AVX2 version of gcm_enc/dec engaged.
[    4.252946] AES CTR mode by8 optimization enabled
[    4.258357] Linux agpgart interface v0.103
[    4.260771] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    4.260776] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    4.265438] r8168 0000:25:00.0 enp37s0: renamed from eth0
[    4.293466] snd_hda_intel 0000:26:00.1: Handle vga_switcheroo audio client
[    4.293468] snd_hda_intel 0000:26:00.1: Force to non-snoop mode
[    4.298263] mousedev: PS/2 mouse device common for all mice
[    4.321737] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input15
[    4.321788] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input16
[    4.321836] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input17
[    4.321882] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input18
[    4.321925] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input19
[    4.321968] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:26:00.1/sound/card0/input20
[    4.499907] Adding 3071996k swap on /dev/sdb2.  Priority:-2 extents:1 across:3071996k SSDscFS
[    4.504779] random: crng init done
[    4.504780] random: 7 urandom warning(s) missed due to ratelimiting
[    4.513696] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.513698] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.513699] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.513700] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.513700] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.513702] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.513703] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.513703] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    4.524529] fuse init (API version 7.27)
[    4.526982] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input21
[    4.527027] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input22
[    4.527067] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input23
[    4.527108] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input24
[    4.527145] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:28:00.3/sound/card1/input25
[    4.530147] Bluetooth: Core ver 2.22
[    4.530160] NET: Registered protocol family 31
[    4.530161] Bluetooth: HCI device and connection manager initialized
[    4.530164] Bluetooth: HCI socket layer initialized
[    4.530165] Bluetooth: L2CAP socket layer initialized
[    4.530175] Bluetooth: SCO socket layer initialized
[    4.540317] usbcore: registered new interface driver btusb
[    4.555857] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: discard
[    4.558549] usbcore: registered new interface driver snd-usb-audio
[    4.586587] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.665902] [drm] amdgpu kernel modesetting enabled.
[    4.669706] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    4.686062] Parsing CRAT table with 1 nodes
[    4.686067] Ignoring ACPI CRAT on non-APU system
[    4.686070] Virtual CRAT table created for CPU
[    4.686071] Parsing CRAT table with 1 nodes
[    4.686072] Creating topology SYSFS entries
[    4.686089] Topology: Add CPU node
[    4.686090] Finished initializing topology
[    4.686173] kfd kfd: Initialized module
[    4.686587] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    4.686588] fb: switching to amdgpudrmfb from VESA VGA
[    4.686606] Console: switching to colour dummy device 80x25
[    4.686851] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1458:0x22F0 0xEF).
[    4.686859] [drm] register mmio base: 0xFE900000
[    4.686859] [drm] register mmio size: 262144
[    4.686867] [drm] add ip block number 0 <vi_common>
[    4.686868] [drm] add ip block number 1 <gmc_v8_0>
[    4.686869] [drm] add ip block number 2 <tonga_ih>
[    4.686869] [drm] add ip block number 3 <powerplay>
[    4.686870] [drm] add ip block number 4 <dm>
[    4.686871] [drm] add ip block number 5 <gfx_v8_0>
[    4.686871] [drm] add ip block number 6 <sdma_v3_0>
[    4.686872] [drm] add ip block number 7 <uvd_v6_0>
[    4.686872] [drm] add ip block number 8 <vce_v3_0>
[    4.686882] [drm] UVD is enabled in VM mode
[    4.686882] [drm] UVD ENC is enabled in VM mode
[    4.686884] [drm] VCE enabled in VM mode
[    4.687061] amdgpu 0000:26:00.0: No more image in the PCI ROM
[    4.687077] ATOM BIOS: xxx-xxx-xxx
[    4.687099] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    4.691839] amdgpu 0000:26:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    4.691840] amdgpu 0000:26:00.0: GART: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[    4.691847] [drm] Detected VRAM RAM=4096M, BAR=256M
[    4.691848] [drm] RAM width 256bits GDDR5
[    4.691884] [TTM] Zone  kernel: Available graphics memory: 8210204 kiB
[    4.691884] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    4.691885] [TTM] Initializing pool allocator
[    4.691887] [TTM] Initializing DMA pool allocator
[    4.691910] [drm] amdgpu: 4096M of VRAM memory ready
[    4.691911] [drm] amdgpu: 4096M of GTT memory ready.
[    4.691922] [drm] GART: num cpu pages 65536, num gpu pages 65536
[    4.691983] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000).
[    4.700538] [drm] Chained IB support enabled!
[    4.716085] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[    4.718046] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[    4.778329] amdgpu: [powerplay] Failed to retrieve minimum clocks.
[    4.778330] amdgpu: [powerplay] Error in phm_get_clock_info 
[    4.778374] [drm] DM_PPLIB: values for Engine clock
[    4.778375] [drm] DM_PPLIB:	 300000
[    4.778375] [drm] DM_PPLIB:	 588000
[    4.778375] [drm] DM_PPLIB:	 952000
[    4.778376] [drm] DM_PPLIB:	 1041000
[    4.778376] [drm] DM_PPLIB:	 1106000
[    4.778376] [drm] DM_PPLIB:	 1168000
[    4.778377] [drm] DM_PPLIB:	 1209000
[    4.778377] [drm] DM_PPLIB:	 1280000
[    4.778377] [drm] DM_PPLIB: Validation clocks:
[    4.778378] [drm] DM_PPLIB:    engine_max_clock: 128000
[    4.778378] [drm] DM_PPLIB:    memory_max_clock: 175000
[    4.778378] [drm] DM_PPLIB:    level           : 8
[    4.778379] [drm] DM_PPLIB: values for Memory clock
[    4.778379] [drm] DM_PPLIB:	 300000
[    4.778380] [drm] DM_PPLIB:	 1000000
[    4.778380] [drm] DM_PPLIB:	 1750000
[    4.778380] [drm] DM_PPLIB: Validation clocks:
[    4.778381] [drm] DM_PPLIB:    engine_max_clock: 128000
[    4.778381] [drm] DM_PPLIB:    memory_max_clock: 175000
[    4.778381] [drm] DM_PPLIB:    level           : 8
[    4.798231] [drm] Display Core initialized with v3.1.59!
[    4.816898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.816900] Bluetooth: BNEP filters: protocol multicast
[    4.816904] Bluetooth: BNEP socket layer initialized
[    4.823536] [drm] SADs count is: 0, don't need to read it
[    4.823630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.823631] [drm] Driver supports precise vblank timestamp query.
[    4.852821] [drm] UVD and UVD ENC initialized successfully.
[    4.953765] [drm] VCE initialized successfully.
[    4.954639] kfd kfd: Allocated 3969056 bytes on gart
[    4.954652] Virtual CRAT table created for GPU
[    4.954653] Parsing CRAT table with 1 nodes
[    4.954660] Creating topology SYSFS entries
[    4.954715] Topology: Add dGPU node [0x67df:0x1002]
[    4.954768] kfd kfd: added device 1002:67df
[    4.956309] [drm] fb mappable at 0xE0D11000
[    4.956310] [drm] vram apper at 0xE0000000
[    4.956311] [drm] size 8294400
[    4.956311] [drm] fb depth is 24
[    4.956311] [drm]    pitch is 7680
[    4.956357] fbcon: amdgpudrmfb (fb0) is primary device
[    4.991452] Console: switching to colour frame buffer device 240x67
[    5.007901] amdgpu 0000:26:00.0: fb0: amdgpudrmfb frame buffer device
[    5.027903] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:26:00.0 on minor 0
[    5.062147] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[    5.062453] enp37s0: 0xffffaa4841ae1000, 70:85:c2:a2:9a:48, IRQ 66
[    5.112763] IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
[    6.852629] kauditd_printk_skb: 100 callbacks suppressed
[    6.852630] audit: type=1130 audit(1542877849.381:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.862049] audit: type=1006 audit(1542877849.391:68): pid=988 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[    6.899843] audit: type=1130 audit(1542877849.427:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.673786] audit: type=1130 audit(1542877850.201:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.163110] r8168: enp37s0: link up
[    8.163128] IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
[    9.271889] ccp 0000:27:00.2: sev command 0x4 timed out, disabling PSP 
[    9.271891] ccp 0000:27:00.2: SEV: failed to get status. Error: 0x0
[    9.291075] kvm: Nested Virtualization enabled
[    9.291079] kvm: Nested Paging enabled
[    9.291080] SVM: Virtual VMLOAD VMSAVE supported
[    9.291080] SVM: Virtual GIF supported
[    9.294093] MCE: In-kernel MCE decoding enabled.
[    9.297318] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.297319] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.640818] audit: type=1131 audit(1542877852.171:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.083043] audit: type=1131 audit(1542877857.611:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   35.072718] audit: type=1131 audit(1542877877.601:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.985286] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[   46.293861] usb 1-6: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10
[   46.293865] usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   46.293867] usb 1-6: Product: USB Sound Device        
[   46.376895] usb 1-6: current rate 30464 is different from the runtime rate 96000
[   46.415882] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[   46.415886] usb 1-6: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
[   46.439905] usb 1-6: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
[   46.439909] usb 1-6: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
[   46.501896] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[   46.501900] usb 1-6: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
[   46.525917] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[   46.525921] usb 1-6: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
[   46.549899] usb 1-6: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
[   46.549903] usb 1-6: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
[   46.561722] input: USB Sound Device         as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-6/1-6:1.3/0003:0D8C:0102.0008/input/input26
[   46.618746] hid-generic 0003:0D8C:0102.0008: input,hidraw5: USB HID v1.00 Device [USB Sound Device        ] on usb-0000:03:00.0-6/input3
[   50.713843] logitech-hidpp-device 0003:046D:2011.0005: HID++ 1.0 device connected.
[   52.626346] audit: type=1006 audit(1542877895.154:74): pid=1078 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   52.636999] audit: type=1130 audit(1542877895.164:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   52.641395] audit: type=1006 audit(1542877895.167:76): pid=1150 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   52.662605] audit: type=1131 audit(1542877895.191:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   52.684429] audit: type=1130 audit(1542877895.211:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   52.689186] audit: type=1131 audit(1542877895.217:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   53.082570] audit: type=1130 audit(1542877895.611:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   53.256528] audit: type=1130 audit(1542877895.784:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   53.263158] audit: type=1131 audit(1542877895.791:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pamac-system comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   53.435312] audit: type=1325 audit(1542877895.964:83): table=filter family=2 entries=135
[   53.720001] Bluetooth: RFCOMM TTY layer initialized
[   53.720005] Bluetooth: RFCOMM socket layer initialized
[   53.720007] Bluetooth: RFCOMM ver 1.11
[   56.290520] logitech-hidpp-device 0003:046D:400A.0006: HID++ 2.0 device connected.
[   60.898467] kauditd_printk_skb: 63 callbacks suppressed
[   60.898468] audit: type=1325 audit(1542877903.427:105): table=filter family=10 entries=176
[   60.898490] audit: type=1300 audit(1542877903.427:105): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=557f166745f0 items=0 ppid=1840 pid=1846 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="ip6tables" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   60.898492] audit: type=1327 audit(1542877903.427:105): proctitle=2F7362696E2F6970367461626C6573002D2D6E65772D636861696E005049415F495056364C45414B5F4F55545055545F52554C4553
[   60.900196] audit: type=1325 audit(1542877903.427:106): table=filter family=10 entries=178
[   60.900217] audit: type=1300 audit(1542877903.427:106): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=55d32dae8010 items=0 ppid=1840 pid=1849 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="ip6tables" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   60.900218] audit: type=1327 audit(1542877903.427:106): proctitle=2F7362696E2F6970367461626C6573002D2D617070656E64005049415F495056364C45414B5F4F55545055545F52554C4553002D2D6A756D700044524F50
[   60.901986] audit: type=1325 audit(1542877903.431:107): table=filter family=10 entries=179
[   60.902014] audit: type=1300 audit(1542877903.431:107): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=55ac7d9e6200 items=0 ppid=1840 pid=1852 auid=1000 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=2 comm="ip6tables" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   60.902016] audit: type=1327 audit(1542877903.431:107): proctitle=2F7362696E2F6970367461626C6573002D2D696E73657274004F5554505554002D2D6A756D70005049415F495056364C45414B5F4F55545055545F52554C4553
[   66.900016] tun: Universal TUN/TAP device driver, 1.6
[   66.927120] audit: type=1130 audit(1542877909.454:108): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   77.072675] audit: type=1131 audit(1542877919.601:109): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Just to make sure: are you overclocking your RAM (latencies and/or frequency)?
If yes, please try again with default RAM settings, i.e. the settings that your RAM is officially specified for.

1 Like

Hello Torvic, good to see you again too.

Before i’d overclocked anything when running Manjaro XFCE 17.1.2 on the older BIOS rev., the glitches happened with any kernels above 4.14 LTS.

With the new BIOS, i tested what you mentioned on 4.19 LTS. Corsair’s stock profile for these RAM sticks is 16-18-18-18-36. Their performance profile is 15-15-15-15-36.

With the new BIOS, tried the stock profile with XMP turned off. Still glitches.

Turned on XMP and kept the stock profile. Still glitches.

With XMP on, went in and set the performance profile. Still glitches. This is what i’m using now to type this message. With difficulty since the glitches are terrible when Firefox is running.

When Firefox is not running, the glitches are sparse and intermittent and nowhere near as bad as before, but still do happen. Referencing Video #1 from the OP, i can now drag Pacman around the screen like a madman, and the screen does not glitch as much as before.

When booting into LightDM, the screen glitches a couple of times and stops.

I have another SSD sitting here with Linux Mint 19. Gonna plug that in, and see what happens. Will report back later. Will stick to the current RAM timings from Corsair’s performance profile for now.

Back from troubleshooting.

On Linux Mint 19 with Kernel 4.15.0-34, still glitches.
With Kernel 4.15.0-39, still glitches.
Both glitch a fair bit worse than Manjaro XFCE 4.19 LTS without Firefox running.
With Firefox running, the glitches are better than Manjaro XFCE 4.19 LTS and i was able to watch a YT video without the glitches interrupting and ruining the fun.

With Kernel 4.15.0-39 still running, i toggled Freesync and Overdrive settings on my monitor. With all combinations of these 2 settings, glitches still happened.

Now booted back into Manjaro XFCE 4.14 LTS, and am sat here wondering about this one burning question - what is the intrinsic difference between Kernel 4.14 LTS and other newer kernels with respect to graphics?

I’ve got 3 HDMI cables here.

One was purchased online separately from the monitor. 5m long. Let’s call this Cable 1 .
One came with the monitor. 1m long. Let’s call this Cable 2.
One was bought from a local shop, 3m long, and is branded to support 4K. Let’s call this Cable 3.

I’ve been using Cable 3 all along because when this new computer first arrived, Cables 1 & 2 just would not deliver a signal to the monitor. Only Cable 3 did.

Just now, Cables 1 & 2 were connected one after the other while booted and re-booted into Kernel 4.19 LTS. The good news is that now Cables 1 & 2 work flawlessly. The bad news is that glitching is still there.

Think we can safely say cables most likely are not the source of the glitches. Currently using Cable 2 to run the monitor. Unfortunately, this monitor does not have Display Port, so am unable to test with DP cables.

The glitches have been seen happening with 5 specific scenarios:

  1. Booting into LightDM - 2 or 3 glitches, then normal.

  2. Booting into desktop - 2 or 3 glitches, then normal.

  3. When a window is dragged around the screen, and snap-maximizes - glitch during the maximize and revert-to-original-size processes. Tried this with Package Manager and LibreOffice Writer. Videos:

  1. When Whisker Menu is activated - glitches when opening and closing Whisker Menu.
  1. Firefox - heavy glitches when moving the mouse around on the screen, and when typing a reply. Glitches also when watching YT videos in fullscreen mode.

I’m happy to accept all the glitches above as quirks for day to day running, except one - Number 5. This is just too much distraction.

Thoughts/ideas please?

Off-topic - another issue has just cropped up.

I’m unable to copy-paste or cut-paste ANY files or folders from Desktop to other drives but am able to copy-paste from other drives to Desktop. Files on the Desktop can only be permanently deleted. The error message that comes up is:
Error when getting information for file “/home/xfceman/Desktop/01.png”: No such file or directory
and when i hit “Skip”, it says:
Operation not supported

If anyone could help with this issue, it would be most appreciated. :pray:

Regarding the video glitches … i would call @anon35400795 to the rescue (even tho i don’t like to summon people when i know they are busy)

Regarding the “from Desktop copy to other drives” - make sure your home directory has the correct permissions and ownership for all files and folders in it.

*appears*
Hu? :smiley:

DisplayCore comes to my mind. Try to boot a newer Kernel with amdgpu.dc=0 kernel option. It could also be a faulty videofirmware. try to boot up a Manjaro 18.0 ISO in UEFI mode, hopefully this one was better tested. But of course can also be damages caused by the overclocking, who only appear um newer Kernel version, because they support more parts of the hardware. It can however also be a drivers related bug. In that case you need to report that bug if nothing other helps.

I dont think its an Xorg related thing.

1 Like

From command line, “ls -ld Desktop” returned:
drwxr-xr-x 7 xfceman xfceman 4096 Nov 23 18:43 Desktop

So i went and issued “sudo chgrp xfceman Desktop” and “sudo chmod -R g+rwx Desktop”, and re-ran “ls -ld Desktop” which now returns:
drwxrwxr-x 7 xfceman xfceman 4096 Nov 23 18:43 Desktop

Looking at Properties of various files in Desktop, Owner (Xfceman) and Group (xfceman) both have read & write access. But the problem still persists when trying to copy-paste or cut-paste a file from Desktop to anywhere else.

And thank you for the @anon35400795 summon, it worked! :grin:

Hello Tids, and thank you for coming into the thread. Please be patient with me, as i’m a newbie and don’t have a good enough grasp of Linux yet to fly through things.

For instance,

how would one do this? Step-by-step or link to an existing tutorial would be very helpful.

I can do this hopefully tomorrow and report back, got some work to clear tonight. Interestingly, booting into Manjaro 18.0 ISO in Legacy mode was fine, no glitches observed. And if need be, i can also try to do a fresh install by :dizzy_face: nuking the Linux Mint SSD thoroughly and clean-installing Manjaro 18.0 XFCE there.

The glitches issue was happening before any overclocking was undertaken, GPU included. It was happening with bone stock settings throughout the computer.

Thank you for the tips and guidance! :pray:

Edited for incorrect interpretation
That 7 means is executable and it shouldn’t be. The default is 2
see here some hints
https://wiki.archlinux.org/index.php/Umask

Forum kindly sponsored by Bytemark