[SOLVED]No internet from any interface on live USB and on install afterwards

Hello Manjaro forums! Thank you for reading me out.

I recently installed Manajro on a desktop computer and I don’t have internet from both my ethernet interface and my wifi card on my Manjaro installation. I also don’t have internet when I boot from the live USB. I have Windows 10 on another HDD and I have no problems with internet when I boot on it.
I looked through the forums, and people often had single interfaces not working, and I wasn’t able to find a fix for my situation. I must also admit I’m an Arch and Manjaro noob, so I may not get the same information you probably do from reading a post or the wiki.

Here is my inxi -Fx output followed by the output of journalctl -b0 | grep enp5s0:

Another possibly helpful note: I remember installing Ubuntu a few months back on the same desktop and I had the same exact problem.

THanks in advance!!

You won’t get much help posting screencaps.

Please post all terminal commands as text with code tags, (not as pics).

Information on how to properly post hardware specs and logs:

Please format any terminal output with three backticks before and after, as shown in this picture:

Please post:

inxi -Fxxxz
dmesg
lsmod
hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|driver\:|status\:|cmd\:|file\:|detected\:" | grep -v "Config Status" 

This ^^^

Are you trolling the forum, or can you not read English. Perhaps use a better translator if language is a problem.

Woa.

I read the directions concerning screencaps, but having no internet, it makes copy pasting somewhat difficult. The second image was a queued post because first time posters cannot have two images per post, and can’t post twice in a thread before theirs a reply, it seems my second post was queued.

Anyways thank you for taking the time to reply: I borrowed a usb stick from a friend and here are the requested outputs:

inxi:

inxi -Fxxxz
System:
  Host: laurent-pc Kernel: 4.19.13-1-MANJARO x86_64 bits: 64 compiler: gcc 
  v: 8.2.1 Desktop: Gnome 3.30.2 wm: gnome-shell dm: GDM 3.30.2 
  Distro: Manjaro Linux 
Machine:
  Type: Desktop System: Gigabyte product: N/A v: N/A serial: <filter> 
  Chassis: type: 3 serial: <filter> 
  Mobo: Gigabyte model: 990FXA-UD3 v: x.x serial: <filter> 
  UEFI: American Megatrends v: F2 date: 07/15/2013 
CPU:
  Topology: 8-Core model: AMD FX-8320 bits: 64 type: MCP arch: Bulldozer 
  L2 cache: 2048 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
  bogomips: 56272 
  Speed: 1403 MHz min/max: 1400/3500 MHz boost: enabled Core speeds (MHz): 
  1: 1442 2: 1492 3: 1446 4: 1456 5: 1451 6: 1668 7: 1406 8: 1404 
Graphics:
  Device-1: NVIDIA GK104 [GeForce GTX 680] vendor: eVga.com. driver: nouveau 
  v: kernel bus ID: 01:00.0 chip ID: 10de:1180 
  Display: x11 server: X.org 1.20.3 driver: nouveau compositor: gnome-shell 
  resolution: <xdpyinfo missing> 
  OpenGL: renderer: NVE4 v: 4.3 Mesa 18.3.1 direct render: Yes 
Audio:
  Device-1: AMD SBx00 Azalia vendor: Gigabyte driver: snd_hda_intel 
  v: kernel bus ID: 00:14.2 chip ID: 1002:4383 
  Device-2: NVIDIA GK104 HDMI Audio vendor: eVga.com. driver: snd_hda_intel 
  v: kernel bus ID: 01:00.1 chip ID: 10de:0e0a 
  Device-3: Creative Labs CA0106/CA0111 [SB Live!/Audigy/X-Fi Series] 
  driver: snd_ca0106 v: kernel bus ID: 04:06.0 chip ID: 1102:0007 
  Sound Server: ALSA v: k4.19.13-1-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Gigabyte driver: r8168 v: 8.045.08-NAPI port: b000 bus ID: 05:00.0 
  chip ID: 10ec:8168 
  IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter> 
  Device-2: Qualcomm Atheros AR93xx Wireless Network Adapter driver: ath9k 
  v: kernel port: b000 bus ID: 06:00.0 chip ID: 168c:0030 
  IF: wlp6s0 state: down mac: <filter> 
Drives:
  Local Storage: total: 1.30 TiB used: 6.17 GiB (0.5%) 
  ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 120GB size: 111.79 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: BB0Q scheme: GPT 
  ID-2: /dev/sdb vendor: Kingston model: SA400S37240G size: 223.57 GiB 
  speed: 6.0 Gb/s serial: <filter> rev: 5A scheme: GPT 
  ID-3: /dev/sdc vendor: Western Digital model: WD7501AALS-00J7B1 
  size: 698.64 GiB speed: 3.0 Gb/s serial: <filter> rev: 0K05 scheme: MBR 
  ID-4: /dev/sdd vendor: Western Digital model: WD3200AAKS-00L9A0 
  size: 298.09 GiB speed: 3.0 Gb/s serial: <filter> rev: 3E01 scheme: MBR 
  ID-5: /dev/sde type: USB vendor: Silicon Power model: silicon -power 
  size: 983.0 MiB serial: <filter> rev: 0.00 scheme: MBR 
Partition:
  ID-1: / size: 100.58 GiB used: 5.77 GiB (5.7%) fs: ext4 dev: /dev/sda2 
  ID-2: swap-1 size: 8.80 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3 
Sensors:
  System Temperatures: cpu: 26.6 C mobo: N/A gpu: nouveau temp: 44 C 
  Fan Speeds (RPM): N/A gpu: nouveau fan: 1140 
Info:
  Processes: 231 Uptime: 1m Memory: 7.82 GiB used: 617.7 MiB (7.7%) 
  Init: systemd v: 239 Compilers: gcc: N/A Shell: bash v: 4.4.23 
  running in: gnome-terminal inxi: 3.0.28 

dmesg:

dmesg
[    0.000000] Linux version 4.19.13-1-MANJARO (builduser@development) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Sat Dec 29 15:43:56 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=6e92270d-1eea-4549-9bfa-d5dfeb8ec103 rw quiet resume=UUID=08427ebe-73a9-4dad-b9ab-739679178ab3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x1f9/0x290 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce860fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce861000-0x00000000cea38fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cea39000-0x00000000cea42fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cea43000-0x00000000cee32fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cee33000-0x00000000cf102fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf103000-0x00000000cf159fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000cf15a000-0x00000000cf15afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf15b000-0x00000000cf360fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf361000-0x00000000cf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xcea3b000  ACPI 2.0=0xcea3b000  SMBIOS=0xf04c0  MPS=0xfd4d0 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3516.001 MHz processor
[    0.002931] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002933] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.009135] AGP: No AGP bridge found
[    0.009191] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[    0.009195] MTRR default type: uncachable
[    0.009195] MTRR fixed ranges enabled:
[    0.009197]   00000-9FFFF write-back
[    0.009197]   A0000-BFFFF write-through
[    0.009198]   C0000-CFFFF write-protect
[    0.009199]   D0000-DFFFF uncachable
[    0.009200]   E0000-FFFFF write-protect
[    0.009200] MTRR variable ranges enabled:
[    0.009202]   0 base 000000000000 mask FFFF80000000 write-back
[    0.009203]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.009204]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.009205]   3 base 0000CF800000 mask FFFFFF800000 uncachable
[    0.009205]   4 disabled
[    0.009206]   5 disabled
[    0.009206]   6 disabled
[    0.009207]   7 disabled
[    0.009208] TOM2: 000000022f000000 aka 8944M
[    0.010116] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.010215] total RAM covered: 3320M
[    0.010709] Found optimal setting for mtrr clean up
[    0.010710]  gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
[    0.011500] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.011506] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.015618] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [(____ptrval____)]
[    0.015647] Scanning 1 areas for low memory corruption
[    0.015649] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.015652] Using GB pages for direct mapping
[    0.015653] BRK [0x127e01000, 0x127e01fff] PGTABLE
[    0.015656] BRK [0x127e02000, 0x127e02fff] PGTABLE
[    0.015657] BRK [0x127e03000, 0x127e03fff] PGTABLE
[    0.015699] BRK [0x127e04000, 0x127e04fff] PGTABLE
[    0.015701] BRK [0x127e05000, 0x127e05fff] PGTABLE
[    0.015948] BRK [0x127e06000, 0x127e06fff] PGTABLE
[    0.016016] BRK [0x127e07000, 0x127e07fff] PGTABLE
[    0.016124] BRK [0x127e08000, 0x127e08fff] PGTABLE
[    0.016206] BRK [0x127e09000, 0x127e09fff] PGTABLE
[    0.016488] Secure boot could not be determined
[    0.016489] RAMDISK: [mem 0x371a5000-0x378c9fff]
[    0.016495] ACPI: Early table checksum verification disabled
[    0.016498] ACPI: RSDP 0x00000000CEA3B000 000024 (v02 ALASKA)
[    0.016501] ACPI: XSDT 0x00000000CEA3B070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.016506] ACPI: FACP 0x00000000CEA40D20 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.016511] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180810/tbfadt-624)
[    0.016516] ACPI: DSDT 0x00000000CEA3B158 005BC1 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.016519] ACPI: FACS 0x00000000CEE2DF80 000040
[    0.016521] ACPI: APIC 0x00000000CEA40E18 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.016524] ACPI: FPDT 0x00000000CEA40EB8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.016527] ACPI: MCFG 0x00000000CEA40F00 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.016530] ACPI: HPET 0x00000000CEA40F40 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.016533] ACPI: BGRT 0x00000000CEA40F78 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.016536] ACPI: SSDT 0x00000000CEA40FB0 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.016544] ACPI: Local APIC address 0xfee00000
[    0.016652] No NUMA configuration found
[    0.016653] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[    0.016656] NODE_DATA(0) allocated [mem 0x22effa000-0x22effdfff]
[    0.016681] Zone ranges:
[    0.016681]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.016683]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.016684]   Normal   [mem 0x0000000100000000-0x000000022effffff]
[    0.016685]   Device   empty
[    0.016686] Movable zone start for each node
[    0.016686] Early memory node ranges
[    0.016687]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.016688]   node   0: [mem 0x0000000000100000-0x00000000ce860fff]
[    0.016689]   node   0: [mem 0x00000000cf15a000-0x00000000cf15afff]
[    0.016689]   node   0: [mem 0x00000000cf361000-0x00000000cf7fffff]
[    0.016690]   node   0: [mem 0x0000000100001000-0x000000022effffff]
[    0.016693] Reserved but unavailable: 97 pages
[    0.016694] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[    0.016696] On node 0 totalpages: 2088095
[    0.016697]   DMA zone: 64 pages used for memmap
[    0.016697]   DMA zone: 25 pages reserved
[    0.016698]   DMA zone: 3999 pages, LIFO batch:0
[    0.017200]   DMA32 zone: 13173 pages used for memmap
[    0.017201]   DMA32 zone: 843009 pages, LIFO batch:63
[    0.035839]   Normal zone: 19392 pages used for memmap
[    0.035841]   Normal zone: 1241087 pages, LIFO batch:63
[    0.062486] ACPI: PM-Timer IO Port: 0x808
[    0.062490] ACPI: Local APIC address 0xfee00000
[    0.062496] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.062504] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.062506] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.062508] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.062510] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.062512] ACPI: IRQ0 used by override.
[    0.062512] ACPI: IRQ9 used by override.
[    0.062514] Using ACPI (MADT) for SMP configuration information
[    0.062516] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.062527] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.062546] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.062548] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.062550] PM: Registered nosave memory: [mem 0xce861000-0xcea38fff]
[    0.062550] PM: Registered nosave memory: [mem 0xcea39000-0xcea42fff]
[    0.062551] PM: Registered nosave memory: [mem 0xcea43000-0xcee32fff]
[    0.062552] PM: Registered nosave memory: [mem 0xcee33000-0xcf102fff]
[    0.062552] PM: Registered nosave memory: [mem 0xcf103000-0xcf159fff]
[    0.062554] PM: Registered nosave memory: [mem 0xcf15b000-0xcf360fff]
[    0.062555] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[    0.062556] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.062556] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.062557] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.062557] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.062558] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.062558] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.062559] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.062559] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.062560] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.062561] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.062561] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.062562] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.062562] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.062563] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.062563] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.062564] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.062566] [mem 0xcf800000-0xf7ffffff] available for PCI devices
[    0.062567] Booting paravirtualized kernel on bare hardware
[    0.062569] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.179150] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.179667] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.179674] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.179675] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.179697] Built 1 zonelists, mobility grouping on.  Total pages: 2055441
[    0.179698] Policy zone: Normal
[    0.179699] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=6e92270d-1eea-4549-9bfa-d5dfeb8ec103 rw quiet resume=UUID=08427ebe-73a9-4dad-b9ab-739679178ab3
[    0.191289] AGP: Checking aperture...
[    0.197487] AGP: No AGP bridge found
[    0.197490] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[    0.231589] Memory: 7934508K/8352380K available (12300K kernel code, 1383K rwdata, 3692K rodata, 1540K init, 3796K bss, 417872K reserved, 0K cma-reserved)
[    0.231701] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.231708] ftrace: allocating 36082 entries in 141 pages
[    0.249083] rcu: Preemptible hierarchical RCU implementation.
[    0.249084] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.249084] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.249085] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.249086] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.249087] 	Tasks RCU enabled.
[    0.249087] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.250999] NR_IRQS: 20736, nr_irqs: 1032, preallocated irqs: 16
[    0.251252] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.251296] Console: colour dummy device 80x25
[    0.251300] console [tty0] enabled
[    0.251317] ACPI: Core revision 20180810
[    0.251473] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.251482] hpet clockevent registered
[    0.251484] APIC: Switch to symmetric I/O mode setup
[    0.251919] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.268154] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32ae5c2f928, max_idle_ns: 440795269452 ns
[    0.268163] Calibrating delay loop (skipped), value calculated using timer frequency.. 7034.00 BogoMIPS (lpj=11720003)
[    0.268165] pid_max: default: 32768 minimum: 301
[    0.268424] Security Framework initialized
[    0.268425] Yama: becoming mindful.
[    0.268429] AppArmor: AppArmor disabled by boot time parameter
[    0.270122] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.271131] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.271175] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.271204] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.271424] mce: CPU supports 7 MCE banks
[    0.271432] LVT offset 1 assigned for vector 0xf9
[    0.271437] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.271437] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.271439] Spectre V2 : Mitigation: Full AMD retpoline
[    0.271440] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.271447] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.271448] Spectre V2 : User space: Vulnerable
[    0.271449] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.271644] Freeing SMP alternatives memory: 28K
[    0.284821] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.301507] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.301512] ... version:                0
[    0.301512] ... bit width:              48
[    0.301513] ... generic registers:      6
[    0.301514] ... value mask:             0000ffffffffffff
[    0.301514] ... max period:             00007fffffffffff
[    0.301515] ... fixed-purpose events:   0
[    0.301515] ... event mask:             000000000000003f
[    0.308163] rcu: Hierarchical SRCU implementation.
[    0.331511] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.338172] smp: Bringing up secondary CPUs ...
[    0.378181] x86: Booting SMP configuration:
[    0.378182] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.640846] smp: Brought up 1 node, 8 CPUs
[    0.640846] smpboot: Max logical packages: 1
[    0.640846] smpboot: Total of 8 processors activated (56278.01 BogoMIPS)
[    0.641852] devtmpfs: initialized
[    0.641852] x86/mm: Memory block size: 128MB
[    0.642284] PM: Registering ACPI NVS region [mem 0xcea43000-0xcee32fff] (4128768 bytes)
[    0.642284] PM: Registering ACPI NVS region [mem 0xcf15b000-0xcf360fff] (2121728 bytes)
[    0.642284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.642284] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.642284] pinctrl core: initialized pinctrl subsystem
[    0.642284] RTC time: 14:44:33, date: 02/15/19
[    0.642284] NET: Registered protocol family 16
[    0.642284] audit: initializing netlink subsys (disabled)
[    0.642284] audit: type=2000 audit(1550241872.389:1): state=initialized audit_enabled=0 res=1
[    0.644831] cpuidle: using governor ladder
[    0.644839] cpuidle: using governor menu
[    0.644865] ACPI: bus type PCI registered
[    0.644867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.644936] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.644939] PCI: not using MMCONFIG
[    0.644940] PCI: Using configuration type 1 for base access
[    0.644940] PCI: Using configuration type 1 for extended access
[    0.648215] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.648215] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.648275] ACPI: Added _OSI(Module Device)
[    0.648275] ACPI: Added _OSI(Processor Device)
[    0.648275] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.648275] ACPI: Added _OSI(Processor Aggregator Device)
[    0.648275] ACPI: Added _OSI(Linux-Dell-Video)
[    0.648275] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.653325] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.655624] ACPI: Interpreter enabled
[    0.655642] ACPI: (supports S0 S3 S4 S5)
[    0.655644] ACPI: Using IOAPIC for interrupt routing
[    0.655810] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.655860] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.655873] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.655995] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.662549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.662554] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.662559] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.662987] PCI host bridge to bus 0000:00
[    0.662988] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.662990] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.662991] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.662992] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.662993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.662995] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.662996] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[    0.662997] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.663006] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.663138] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.663155] pci 0000:00:02.0: enabling Extended Tags
[    0.663176] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.663275] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.663291] pci 0000:00:09.0: enabling Extended Tags
[    0.663310] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.663401] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.663417] pci 0000:00:0a.0: enabling Extended Tags
[    0.663436] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.663536] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.663551] pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
[    0.663558] pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
[    0.663565] pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
[    0.663572] pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
[    0.663578] pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
[    0.663585] pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
[    0.663703] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.663716] pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
[    0.663847] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.663862] pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
[    0.663921] pci 0000:00:12.2: supports D1 D2
[    0.663922] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.664019] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.664032] pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
[    0.664162] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.664177] pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
[    0.664236] pci 0000:00:13.2: supports D1 D2
[    0.664237] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.664332] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.664465] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.664478] pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
[    0.664485] pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
[    0.664491] pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
[    0.664498] pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
[    0.664505] pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
[    0.664520] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.664521] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.664522] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.664523] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.664612] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.664630] pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.664706] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.664794] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.664935] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.665049] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.665062] pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
[    0.665193] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.665221] pci 0000:00:15.0: enabling Extended Tags
[    0.665254] pci 0000:00:15.0: supports D1 D2
[    0.665358] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    0.665388] pci 0000:00:15.3: enabling Extended Tags
[    0.665420] pci 0000:00:15.3: supports D1 D2
[    0.665521] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.665534] pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
[    0.665663] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.665679] pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
[    0.665737] pci 0000:00:16.2: supports D1 D2
[    0.665738] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.665833] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.665921] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.666006] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.666091] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.666179] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.666263] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.666388] pci 0000:01:00.0: [10de:1180] type 00 class 0x030000
[    0.666405] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.666415] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.666424] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
[    0.666431] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.666437] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[    0.666442] pci 0000:01:00.0: enabling Extended Tags
[    0.666451] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.666508] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.666546] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.666559] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[    0.666586] pci 0000:01:00.1: enabling Extended Tags
[    0.666667] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.678176] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.678179] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.678181] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.678184] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.678221] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[    0.678237] pci 0000:02:00.0: reg 0x10: [mem 0xfe500000-0xfe500fff 64bit]
[    0.678294] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.688169] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.688173] pci 0000:00:09.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.688213] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[    0.688226] pci 0000:03:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.688232] pci 0000:03:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.688238] pci 0000:03:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.688244] pci 0000:03:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.688250] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.688256] pci 0000:03:00.0: reg 0x24: [mem 0xfe410000-0xfe4101ff]
[    0.688262] pci 0000:03:00.0: reg 0x30: [mem 0xfe400000-0xfe40ffff pref]
[    0.688275] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1
[    0.688299] pci 0000:03:00.0: PME# supported from D3hot
[    0.698168] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.698171] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.698173] pci 0000:00:0a.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.698184] pci_bus 0000:04: extended config space not accessible
[    0.698215] pci 0000:04:06.0: [1102:0007] type 00 class 0x040100
[    0.698230] pci 0000:04:06.0: reg 0x10: [io  0xc080-0xc09f]
[    0.698296] pci 0000:04:06.0: supports D1 D2
[    0.698344] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[    0.698360] pci 0000:04:0e.0: reg 0x10: [mem 0xfe300000-0xfe3007ff]
[    0.698367] pci 0000:04:0e.0: reg 0x14: [io  0xc000-0xc07f]
[    0.698430] pci 0000:04:0e.0: supports D2
[    0.698432] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[    0.698488] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.698491] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.698494] pci 0000:00:14.4:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.698497] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.698498] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.698499] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.698500] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.698502] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.698503] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.698504] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[    0.698567] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.698594] pci 0000:05:00.0: reg 0x10: [io  0xb000-0xb0ff]
[    0.698618] pci 0000:05:00.0: reg 0x18: [mem 0xfe200000-0xfe200fff 64bit]
[    0.698634] pci 0000:05:00.0: reg 0x20: [mem 0xda100000-0xda103fff 64bit pref]
[    0.698746] pci 0000:05:00.0: supports D1 D2
[    0.698748] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.698857] pci 0000:00:15.0: PCI bridge to [bus 05]
[    0.698861] pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
[    0.698864] pci 0000:00:15.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.698868] pci 0000:00:15.0:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.698916] pci 0000:06:00.0: [168c:0030] type 00 class 0x028000
[    0.698944] pci 0000:06:00.0: reg 0x10: [mem 0xfe100000-0xfe11ffff 64bit]
[    0.698977] pci 0000:06:00.0: reg 0x30: [mem 0xfe120000-0xfe12ffff pref]
[    0.699042] pci 0000:06:00.0: supports D1
[    0.699043] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    0.699136] pci 0000:00:15.3: PCI bridge to [bus 06]
[    0.699142] pci 0000:00:15.3:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.699680] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.699762] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.699846] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.699945] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.700014] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[    0.700068] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[    0.700122] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[    0.700175] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[    0.701500] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.701501] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.701503] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.701504] vgaarb: loaded
[    0.701636] ACPI: bus type USB registered
[    0.701650] usbcore: registered new interface driver usbfs
[    0.701656] usbcore: registered new interface driver hub
[    0.701686] usbcore: registered new device driver usb
[    0.701705] pps_core: LinuxPPS API ver. 1 registered
[    0.701706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.701708] PTP clock support registered
[    0.701716] EDAC MC: Ver: 3.0.0
[    0.701795] Registered efivars operations
[    0.708242] PCI: Using ACPI for IRQ routing
[    0.713650] PCI: pci_cache_line_size set to 64 bytes
[    0.713711] e820: reserve RAM buffer [mem 0xce861000-0xcfffffff]
[    0.713712] e820: reserve RAM buffer [mem 0xcf15b000-0xcfffffff]
[    0.713713] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[    0.713714] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[    0.713801] NetLabel: Initializing
[    0.713802] NetLabel:  domain hash size = 128
[    0.713802] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.713816] NetLabel:  unlabeled traffic allowed by default
[    0.714857] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.714860] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.718157] clocksource: Switched to clocksource tsc-early
[    0.730701] VFS: Disk quotas dquot_6.6.0
[    0.730716] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.730776] pnp: PnP ACPI init
[    0.730896] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.730901] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.731235] system 00:01: [io  0x040b] has been reserved
[    0.731236] system 00:01: [io  0x04d6] has been reserved
[    0.731238] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.731239] system 00:01: [io  0x0c14] has been reserved
[    0.731241] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.731242] system 00:01: [io  0x0c52] has been reserved
[    0.731243] system 00:01: [io  0x0c6c] has been reserved
[    0.731244] system 00:01: [io  0x0c6f] has been reserved
[    0.731246] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.731247] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.731248] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.731250] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.731251] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.731252] system 00:01: [io  0x0800-0x089f] has been reserved
[    0.731254] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.731255] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.731256] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.731258] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.731260] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.731262] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.731263] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.731265] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.731266] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.731268] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.731270] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    0.731273] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.731461] system 00:02: [io  0x0220-0x0227] has been reserved
[    0.731462] system 00:02: [io  0x0228-0x0237] has been reserved
[    0.731464] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.731467] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.731776] pnp 00:03: [dma 0 disabled]
[    0.731818] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.731843] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.731911] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.731914] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.731961] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.732108] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.732230] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.732234] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.732363] pnp: PnP ACPI: found 9 devices
[    0.738540] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.738569] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.738571] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.738573] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.738575] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.738578] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.738580] pci 0000:00:09.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.738583] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.738585] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.738587] pci 0000:00:0a.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.738591] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.738593] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.738596] pci 0000:00:14.4:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.738602] pci 0000:00:15.0: PCI bridge to [bus 05]
[    0.738604] pci 0000:00:15.0:   bridge window [io  0xb000-0xbfff]
[    0.738607] pci 0000:00:15.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.738609] pci 0000:00:15.0:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.738613] pci 0000:00:15.3: PCI bridge to [bus 06]
[    0.738616] pci 0000:00:15.3:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.738622] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.738623] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.738624] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.738626] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.738627] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.738628] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.738629] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
[    0.738631] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.738632] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[    0.738633] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.738634] pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.738636] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.738637] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.738638] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.738639] pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.738641] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.738642] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.738643] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.738644] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.738645] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.738646] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.738648] pci_bus 0000:04: resource 10 [mem 0xd0000000-0xffffffff window]
[    0.738649] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.738650] pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.738651] pci_bus 0000:05: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
[    0.738653] pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.738718] NET: Registered protocol family 2
[    0.738857] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.738893] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.739046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.739257] TCP: Hash tables configured (established 65536 bind 65536)
[    0.739303] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.739337] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.739406] NET: Registered protocol family 1
[    0.739411] NET: Registered protocol family 44
[    0.827158] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 85673 usecs
[    0.910484] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c6 took 81244 usecs
[    0.993822] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c6 took 81247 usecs
[    1.080490] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c6 took 84625 usecs
[    1.080642] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.080655] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    1.080817] PCI: CLS 64 bytes, default 64
[    1.080852] Unpacking initramfs...
[    1.179929] Freeing initrd memory: 7316K
[    1.179936] PCI-DMA: Disabling AGP.
[    1.179999] PCI-DMA: aperture base @ f8000000 size 65536 KB
[    1.180006] PCI-DMA: using GART IOMMU.
[    1.180007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.183530] amd_uncore: AMD NB counters detected
[    1.183700] LVT offset 0 assigned for vector 0x400
[    1.183803] perf: AMD IBS detected (0x000000ff)
[    1.183852] Scanning for low memory corruption every 60 seconds
[    1.184420] Initialise system trusted keyrings
[    1.184429] Key type blacklist registered
[    1.184496] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.185805] zbud: loaded
[    1.186013] pstore: using zstd compression
[    1.187391] Key type asymmetric registered
[    1.187392] Asymmetric key parser 'x509' registered
[    1.187397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.187442] io scheduler noop registered
[    1.187443] io scheduler deadline registered
[    1.187466] io scheduler cfq registered
[    1.187467] io scheduler mq-deadline registered
[    1.187467] io scheduler kyber registered
[    1.187488] io scheduler bfq registered
[    1.187510] io scheduler bfq-sq registered (default)
[    1.187511] BFQ I/O-scheduler: v9 (with cgroups support)
[    1.187512] blkcg_policy_register: BLKCG_MAX_POLS too small
[    1.188177] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.188241] efifb: probing for efifb
[    1.188252] efifb: showing boot graphics
[    1.189338] efifb: framebuffer at 0xd9000000, using 3072k, total 3072k
[    1.189339] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.189339] efifb: scrolling: redraw
[    1.189340] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.189383] fbcon: Deferring console take-over
[    1.189384] fb0: EFI VGA frame buffer device
[    1.189439] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.189451] ACPI: Power Button [PWRB]
[    1.189486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.189492] ACPI: Power Button [PWRF]
[    1.199837] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.220431] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.221889] usbcore: registered new interface driver usbserial_generic
[    1.221895] usbserial: USB Serial support registered for generic
[    1.221911] rtc_cmos 00:04: RTC can wake from S4
[    1.222019] rtc_cmos 00:04: registered as rtc0
[    1.222032] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.222158] ledtrig-cpu: registered to indicate activity on CPUs
[    1.222364] NET: Registered protocol family 10
[    1.226216] Segment Routing with IPv6
[    1.226235] NET: Registered protocol family 17
[    1.226720] RAS: Correctable Errors collector initialized.
[    1.226724] microcode: microcode updated early to new patch_level=0x06000852
[    1.226753] microcode: CPU0: patch_level=0x06000852
[    1.226759] microcode: CPU1: patch_level=0x06000852
[    1.226767] microcode: CPU2: patch_level=0x06000852
[    1.226774] microcode: CPU3: patch_level=0x06000852
[    1.226781] microcode: CPU4: patch_level=0x06000852
[    1.226786] microcode: CPU5: patch_level=0x06000852
[    1.226789] microcode: CPU6: patch_level=0x06000852
[    1.226795] microcode: CPU7: patch_level=0x06000852
[    1.226832] microcode: Microcode Update Driver: v2.2.
[    1.226842] sched_clock: Marking stable (1226607769, 219962)->(1343995760, -117168029)
[    1.227076] registered taskstats version 1
[    1.227087] Loading compiled-in X.509 certificates
[    1.229184] Loaded X.509 cert 'Build time autogenerated kernel key: 527948c53ade48d6b6b6c73df839ceb5e9e33778'
[    1.229203] zswap: loaded using pool lzo/zbud
[    1.232001] Key type big_key registered
[    1.232307]   Magic number: 7:271:738
[    1.232375] rtc_cmos 00:04: setting system clock to 2019-02-15 14:44:33 UTC (1550241873)
[    1.234592] Freeing unused decrypted memory: 2040K
[    1.235654] Freeing unused kernel image memory: 1540K
[    1.235657] Write protecting the kernel read-only data: 18432k
[    1.236492] Freeing unused kernel image memory: 2008K
[    1.236689] Freeing unused kernel image memory: 404K
[    1.244441] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.244446] Run /init as init process
[    1.321165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.322179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.322180] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    1.323573] ehci-pci: EHCI PCI platform driver
[    1.323764] QUIRK: Enable AMD PLL fix
[    1.323794] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.323800] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.323807] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.323816] ehci-pci 0000:00:12.2: debug port 1
[    1.323863] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe609000
[    1.328209] SCSI subsystem initialized
[    1.334372] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.334427] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.334429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.334430] usb usb1: Product: EHCI Host Controller
[    1.334431] usb usb1: Manufacturer: Linux 4.19.13-1-MANJARO ehci_hcd
[    1.334432] usb usb1: SerialNumber: 0000:00:12.2
[    1.334557] hub 1-0:1.0: USB hub found
[    1.334564] hub 1-0:1.0: 5 ports detected
[    1.334698] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.334703] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    1.334779] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000090
[    1.334951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.334953] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.334954] usb usb2: Product: xHCI Host Controller
[    1.334955] usb usb2: Manufacturer: Linux 4.19.13-1-MANJARO xhci-hcd
[    1.334956] usb usb2: SerialNumber: 0000:02:00.0
[    1.335010] firewire_ohci 0000:04:0e.0: enabling device (0000 -> 0003)
[    1.335174] hub 2-0:1.0: USB hub found
[    1.335183] hub 2-0:1.0: 1 port detected
[    1.335273] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.335275] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    1.335278] xhci_hcd 0000:02:00.0: Host supports USB 3.0  SuperSpeed
[    1.335295] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.335320] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.335321] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.335323] usb usb3: Product: xHCI Host Controller
[    1.335324] usb usb3: Manufacturer: Linux 4.19.13-1-MANJARO xhci-hcd
[    1.335325] usb usb3: SerialNumber: 0000:02:00.0
[    1.335424] hub 3-0:1.0: USB hub found
[    1.335433] hub 3-0:1.0: 4 ports detected
[    1.335778] libata version 3.00 loaded.
[    1.335815] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.335821] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.335825] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.335834] ehci-pci 0000:00:13.2: debug port 1
[    1.335858] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe607000
[    1.339416] ahci 0000:00:11.0: version 3.0
[    1.339555] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.339557] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.340051] scsi host1: ahci
[    1.340206] scsi host2: ahci
[    1.340925] scsi host0: pata_atiixp
[    1.341028] scsi host4: pata_atiixp
[    1.341063] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.341065] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.341516] scsi host3: ahci
[    1.344990] scsi host5: ahci
[    1.345075] ata3: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b100 irq 19
[    1.345077] ata4: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b180 irq 19
[    1.345079] ata5: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b200 irq 19
[    1.345081] ata6: SATA max UDMA/133 abar m1024@0xfe60b000 port 0xfe60b280 irq 19
[    1.345287] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.345289] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.348244] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.348298] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.348300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.348301] usb usb4: Product: EHCI Host Controller
[    1.348302] usb usb4: Manufacturer: Linux 4.19.13-1-MANJARO ehci_hcd
[    1.348303] usb usb4: SerialNumber: 0000:00:13.2
[    1.348419] hub 4-0:1.0: USB hub found
[    1.348427] hub 4-0:1.0: 5 ports detected
[    1.348719] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.348724] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[    1.348727] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.348734] ehci-pci 0000:00:16.2: debug port 1
[    1.348758] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe604000
[    1.348915] scsi host6: ahci
[    1.352604] scsi host7: ahci
[    1.352813] ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 30
[    1.352817] ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 30
[    1.361532] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.361578] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.361579] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.361580] usb usb5: Product: EHCI Host Controller
[    1.361581] usb usb5: Manufacturer: Linux 4.19.13-1-MANJARO ehci_hcd
[    1.361582] usb usb5: SerialNumber: 0000:00:16.2
[    1.361686] hub 5-0:1.0: USB hub found
[    1.361694] hub 5-0:1.0: 4 ports detected
[    1.363296] ohci-pci: OHCI PCI platform driver
[    1.363438] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.363447] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    1.363470] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe60a000
[    1.401619] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.422307] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.422309] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.422310] usb usb6: Product: OHCI PCI host controller
[    1.422311] usb usb6: Manufacturer: Linux 4.19.13-1-MANJARO ohci_hcd
[    1.422312] usb usb6: SerialNumber: 0000:00:12.0
[    1.422474] hub 6-0:1.0: USB hub found
[    1.422481] hub 6-0:1.0: 5 ports detected
[    1.422782] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.422787] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    1.422804] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe608000
[    1.482319] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.482321] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.482322] usb usb7: Product: OHCI PCI host controller
[    1.482323] usb usb7: Manufacturer: Linux 4.19.13-1-MANJARO ohci_hcd
[    1.482324] usb usb7: SerialNumber: 0000:00:13.0
[    1.482493] hub 7-0:1.0: USB hub found
[    1.482500] hub 7-0:1.0: 5 ports detected
[    1.482788] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.482793] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[    1.482814] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe606000
[    1.542306] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.542308] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.542309] usb usb8: Product: OHCI PCI host controller
[    1.542310] usb usb8: Manufacturer: Linux 4.19.13-1-MANJARO ohci_hcd
[    1.542311] usb usb8: SerialNumber: 0000:00:14.5
[    1.542494] hub 8-0:1.0: USB hub found
[    1.542501] hub 8-0:1.0: 2 ports detected
[    1.542751] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.542755] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[    1.542774] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe605000
[    1.602287] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    1.602289] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.602290] usb usb9: Product: OHCI PCI host controller
[    1.602291] usb usb9: Manufacturer: Linux 4.19.13-1-MANJARO ohci_hcd
[    1.602292] usb usb9: SerialNumber: 0000:00:16.0
[    1.602459] hub 9-0:1.0: USB hub found
[    1.602468] hub 9-0:1.0: 4 ports detected
[    1.665588] ata8: SATA link down (SStatus 0 SControl 300)
[    1.665655] ata7: SATA link down (SStatus 0 SControl 300)
[    1.668262] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.809510] usb 2-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[    1.809512] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.809513] usb 2-1: Product: USB2.0 Hub
[    1.810256] hub 2-1:1.0: USB hub found
[    1.810554] hub 2-1:1.0: 4 ports detected
[    1.814865] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.814885] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.814934] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.814959] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.815691] ata6.00: ATA-8: WDC WD3200AAKS-00L9A0, 01.03E01, max UDMA/133
[    1.815696] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.815711] ata5.00: ATA-8: WDC WD7501AALS-00J7B1, 05.00K05, max UDMA/133
[    1.815716] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.816531] ata6.00: configured for UDMA/133
[    1.816551] ata5.00: configured for UDMA/133
[    1.817135] ata3.00: NCQ Send/Recv Log not supported
[    1.817137] ata3.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[    1.817138] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.817600] ata3.00: NCQ Send/Recv Log not supported
[    1.817603] ata3.00: configured for UDMA/133
[    1.817745] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB0Q PQ: 0 ANSI: 5
[    1.820957] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.820964] sd 1:0:0:0: [sda] Write Protect is off
[    1.820965] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.820973] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.822566] ata4.00: ATA-10: KINGSTON SA400S37240G, R0105A, max UDMA/133
[    1.822568] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.825665]  sda: sda1 sda2 sda3
[    1.826022] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.834615] ata4.00: configured for UDMA/133
[    1.834929] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 5A   PQ: 0 ANSI: 5
[    1.835124] sd 2:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.835130] sd 2:0:0:0: [sdb] Write Protect is off
[    1.835131] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.835139] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.835205] scsi 3:0:0:0: Direct-Access     ATA      WDC WD7501AALS-0 0K05 PQ: 0 ANSI: 5
[    1.835330] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    1.835336] sd 3:0:0:0: [sdc] Write Protect is off
[    1.835338] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.835348] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.835547] scsi 5:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 3E01 PQ: 0 ANSI: 5
[    1.835670] sd 5:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.835675] sd 5:0:0:0: [sdd] Write Protect is off
[    1.835677] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.835684] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.839633]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.839980] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.845975]  sdc: sdc1
[    1.846322] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.846600]  sdd: sdd1
[    1.846816] sd 5:0:0:0: [sdd] Attached SCSI disk
[    1.859695] random: fast init done
[    1.905132] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550988e0c00, S400
[    1.919280] PM: Image not found (code -22)
[    1.957432] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.094841] usb 2-1.1: new full-speed USB device number 3 using xhci_hcd
[    2.137663] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.144931] tsc: Refined TSC clocksource calibration: 3516.086 MHz
[    2.144955] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32aead1532e, max_idle_ns: 440795314339 ns
[    2.145035] clocksource: Switched to clocksource tsc
[    2.152025] systemd[1]: Detected architecture x86-64.
[    2.155869] systemd[1]: Set hostname to <laurent-pc>.
[    2.192907] usb 2-1.1: New USB device found, idVendor=1130, idProduct=7979, bcdDevice= 1.09
[    2.192912] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.192916] usb 2-1.1: Product: USB Keyboard
[    2.192919] usb 2-1.1: Manufacturer: CYKB16
[    2.275656] random: systemd: uninitialized urandom read (16 bytes read)
[    2.277290] systemd[1]: Created slice system-getty.slice.
[    2.277321] random: systemd: uninitialized urandom read (16 bytes read)
[    2.277371] systemd[1]: Listening on udev Kernel Socket.
[    2.277379] random: systemd: uninitialized urandom read (16 bytes read)
[    2.277572] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.277710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.277880] systemd[1]: Created slice system-netctl.slice.
[    2.277941] systemd[1]: Listening on udev Control Socket.
[    2.278017] systemd[1]: Listening on Journal Socket.
[    2.290424] EXT4-fs (sda2): re-mounted. Opts: discard
[    2.310682] audit: type=1130 audit(1550241874.572:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.351021] audit: type=1130 audit(1550241874.612:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.357731] audit: type=1130 audit(1550241874.619:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.385608] audit: type=1130 audit(1550241874.649:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.393244] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.393809] systemd-journald[306]: Received request to flush runtime journal from PID 1
[    2.439097] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    2.439119] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    2.439310] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    2.447703] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    2.447839] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    2.449396] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    2.450142] Linux agpgart interface v0.103
[    2.465386] r8168: loading out-of-tree module taints kernel.
[    2.480048] r8168: module verification failed: signature and/or required key missing - tainting kernel
[    2.480621] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    2.483494] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[    2.483512] r8168 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.503491] audit: type=1130 audit(1550241874.765:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.505842] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[    2.505845] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[    2.506405] hidraw: raw HID events driver (C) Jiri Kosina
[    2.512016] cryptd: max_cpu_qlen set to 1000
[    2.541669] AVX version of gcm_enc/dec engaged.
[    2.541671] AES CTR mode by8 optimization enabled
[    2.542075] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    2.542132] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.542142] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.548977] snd_ca0106 0000:04:06.0: enabling device (0000 -> 0001)
[    2.549090] snd_ca0106 0000:04:06.0: Model 100a Rev 00000000 Serial 100a1102
[    2.553843] r8168 0000:05:00.0 enp5s0: renamed from eth0
[    2.559338] usbcore: registered new interface driver usbhid
[    2.559339] usbhid: USB HID core driver
[    2.564277] input: CYKB16 USB Keyboard as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1130:7979.0001/input/input3
[    2.569842] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.572556] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    2.572558] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.572560] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.572562] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.572563] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    2.572564] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.572566] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.572568] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.572569] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.583864] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.595426] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[    2.618406] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    2.618470] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    2.618541] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    2.618606] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    2.618672] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    2.618736] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    2.618807] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    2.620338] hid-generic 0003:1130:7979.0001: input,hidraw0: USB HID v1.10 Keyboard [CYKB16 USB Keyboard] on usb-0000:02:00.0-1.1/input0
[    2.620845] input: CYKB16 USB Keyboard System Control as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1130:7979.0002/input/input12
[    2.623179] Adding 9227464k swap on /dev/sda3.  Priority:-2 extents:1 across:9227464k SSDscFS
[    2.678327] input: CYKB16 USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1130:7979.0002/input/input13
[    2.678687] hid-generic 0003:1130:7979.0002: input,hidraw1: USB HID v1.10 Device [CYKB16 USB Keyboard] on usb-0000:02:00.0-1.1/input1
[    2.681062] kvm: Nested Virtualization enabled
[    2.681065] kvm: Nested Paging enabled
[    2.684552] MCE: In-kernel MCE decoding enabled.
[    2.691343] EDAC amd64: Node 0: DRAM ECC disabled.
[    2.691344] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    2.711841] ath9k 0000:06:00.0: enabling device (0000 -> 0002)
[    2.762161] MXM: GUID detected in BIOS
[    2.786540] audit: type=1130 audit(1550241875.049:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.799524] ath: EEPROM regdomain: 0x21
[    2.799525] ath: EEPROM indicates we should expect a direct regpair map
[    2.799526] ath: Country alpha2 being used: BB
[    2.799527] ath: Regpair used: 0x21
[    2.800576] checking generic (d9000000 300000) vs hw (d0000000 8000000)
[    2.800579] checking generic (d9000000 300000) vs hw (d8000000 2000000)
[    2.800580] fb: switching to nouveaufb from EFI VGA
[    2.800748] nouveau 0000:01:00.0: NVIDIA GK104 (0e4000a2)
[    2.818483] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.818891] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa91981820000, irq=19
[    2.821147] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[    2.821565] audit: type=1130 audit(1550241875.085:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-ECAD\x2dD40D comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.822765] audit: type=1130 audit(1550241875.085:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.864694] audit: type=1130 audit(1550241875.125:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.924498] nouveau 0000:01:00.0: bios: version 80.04.28.00.0d
[    2.926087] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5
[    2.934711] enp5s0: 0xffffa91980e25000, 74:d4:35:02:8d:23, IRQ 31
[    2.937378] random: crng init done
[    2.937379] random: 7 urandom warning(s) missed due to ratelimiting
[    2.998230] usb 2-1.2: new full-speed USB device number 4 using xhci_hcd
[    3.000285] [TTM] Zone  kernel: Available graphics memory: 4098316 kiB
[    3.000287] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.000288] [TTM] Initializing pool allocator
[    3.000292] [TTM] Initializing DMA pool allocator
[    3.000302] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
[    3.000304] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.000307] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    3.000308] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.000310] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
[    3.000312] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000
[    3.000314] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 00020030
[    3.000315] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022f62 00020010
[    3.000316] nouveau 0000:01:00.0: DRM: DCB outp 04: 04833fb6 0f420010
[    3.000318] nouveau 0000:01:00.0: DRM: DCB outp 05: 04033f72 00020010
[    3.000319] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    3.000320] nouveau 0000:01:00.0: DRM: DCB conn 01: 00020131
[    3.000321] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
[    3.000322] nouveau 0000:01:00.0: DRM: DCB conn 03: 00002346
[    3.022314] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.022316] [drm] Driver supports precise vblank timestamp query.
[    3.024160] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    3.168663] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    3.172552] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[    3.172661] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[    3.172726] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[    3.172790] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[    3.175264] usb 2-1.2: New USB device found, idVendor=04d9, idProduct=a067, bcdDevice= 1.24
[    3.175267] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.175268] usb 2-1.2: Product: USB Gaming Mouse
[    3.175270] usb 2-1.2: Manufacturer: Holtek
[    3.229660] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04D9:A067.0003/input/input18
[    3.258271] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0xa0000, bo 000000007d47add4
[    3.278191] fbcon: nouveaufb (fb0) is primary device
[    3.278192] fbcon: Deferring console take-over
[    3.278194] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.285460] holtek_mouse 0003:04D9:A067.0003: input,hidraw2: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:02:00.0-1.2/input0
[    3.285523] holtek_mouse 0003:04D9:A067.0004: Fixing up report descriptor
[    3.288971] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:04D9:A067.0004/input/input19
[    3.301522] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    3.345156] holtek_mouse 0003:04D9:A067.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:02:00.0-1.2/input1
[    3.345390] holtek_mouse 0003:04D9:A067.0005: hiddev1,hidraw4: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:02:00.0-1.2/input2
[    3.372728] mousedev: PS/2 mouse device common for all mice
[    3.499344] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    3.506745] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[    3.518304] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[    3.534708] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[    3.627133] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[    5.199280] r8168: enp5s0: link up
[    5.199348] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[    6.745511] kauditd_printk_skb: 13 callbacks suppressed
[    6.745513] audit: type=1130 audit(1550241879.009:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@enp5s0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.753434] audit: type=1130 audit(1550241879.015:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.770872] audit: type=1130 audit(1550241879.032:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.793229] audit: type=1130 audit(1550241879.055:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.813177] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00020800
[    7.827109] audit: type=1131 audit(1550241880.089:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.024735] fbcon: Taking over console
[   12.025309] Console: switching to colour frame buffer device 210x65
[   13.964555] audit: type=1006 audit(1550241886.225:29): pid=579 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[   13.980328] audit: type=1130 audit(1550241886.242:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.988266] audit: type=1006 audit(1550241886.252:31): pid=648 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   14.054331] audit: type=1130 audit(1550241886.315:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.074940] audit: type=1112 audit(1550241886.339:33): pid=579 uid=0 auid=1000 ses=1 msg='uid=1000 exe="/usr/lib/gdm-session-worker" hostname=? addr=? terminal=? res=success'
[   14.221940] audit: type=1130 audit(1550241886.485:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=tlp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.997914] fuse init (API version 7.27)
[   16.911046] audit: type=1130 audit(1550241889.172:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.801675] audit: type=1130 audit(1550241894.062:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.910807] audit: type=1130 audit(1550241894.172:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   21.913922] audit: type=1130 audit(1550241894.175:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.192484] rfkill: input handler disabled
[   22.214364] audit: type=1130 audit(1550241894.475:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.309354] audit: type=1130 audit(1550241894.572:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.958983] audit: type=1130 audit(1550241895.222:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.994851] usb 2-1.4: new high-speed USB device number 5 using xhci_hcd
[   24.094229] usb 2-1.4: New USB device found, idVendor=13fe, idProduct=1f23, bcdDevice= 1.10
[   24.094232] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   24.094233] usb 2-1.4: Product: -power
[   24.094234] usb 2-1.4: Manufacturer: silicon
[   24.094235] usb 2-1.4: SerialNumber: E68B1B001BA0
[   24.134243] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[   24.134722] scsi host8: usb-storage 2-1.4:1.0
[   24.134862] usbcore: registered new interface driver usb-storage
[   24.138097] usbcore: registered new interface driver uas
[   25.159470] scsi 8:0:0:0: Direct-Access     silicon  -power           0.00 PQ: 0 ANSI: 0 CCS
[   26.263705] sd 8:0:0:0: [sde] 2013184 512-byte logical blocks: (1.03 GB/983 MiB)
[   26.263849] sd 8:0:0:0: [sde] Write Protect is off
[   26.263853] sd 8:0:0:0: [sde] Mode Sense: 23 00 00 00
[   26.264005] sd 8:0:0:0: [sde] No Caching mode page found
[   26.264009] sd 8:0:0:0: [sde] Assuming drive cache: write through
[   26.265629]  sde: sde1
[   26.266687] sd 8:0:0:0: [sde] Attached SCSI removable disk
[   26.709606] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   53.248555] audit: type=1131 audit(1550241925.512:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   55.359880] audit: type=1131 audit(1550241927.622:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   82.066082] audit: type=1131 audit(1550241954.329:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  104.040011] audit: type=1130 audit(1550241976.302:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  134.099567] audit: type=1131 audit(1550242006.362:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

lsmod:

lsmod
Module                  Size  Used by
uas                    28672  0
usb_storage            69632  2 uas
fuse                  118784  3
joydev                 24576  0
mousedev               24576  0
hid_holtek_mouse       16384  0
nls_iso8859_1          16384  2
nls_cp437              20480  2
vfat                   24576  2
fat                    81920  1 vfat
snd_hda_codec_hdmi     57344  1
arc4                   16384  2
nouveau              2187264  3
ath9k                 184320  0
ath9k_common           36864  1 ath9k
input_leds             16384  0
ath9k_hw              507904  2 ath9k_common,ath9k
edac_mce_amd           28672  0
kvm_amd               106496  0
ccp                    98304  1 kvm_amd
ath                    36864  3 ath9k_common,ath9k,ath9k_hw
rng_core               16384  1 ccp
mac80211              929792  2 ath9k,ath9k_hw
kvm                   737280  1 kvm_amd
i2c_algo_bit           16384  1 nouveau
irqbypass              16384  1 kvm
ttm                   126976  1 nouveau
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
pcbc                   16384  0
snd_hda_codec_realtek   118784  1
hid_generic            16384  0
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
drm_kms_helper        208896  1 nouveau
cfg80211              778240  4 ath9k_common,ath9k,ath,mac80211
snd_ca0106             53248  2
mxm_wmi                16384  1 nouveau
aesni_intel           200704  0
snd_hda_intel          45056  7
snd_ac97_codec        147456  1 snd_ca0106
aes_x86_64             20480  1 aesni_intel
usbhid                 57344  0
crypto_simd            16384  1 aesni_intel
snd_hda_codec         151552  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_rawmidi            36864  1 snd_ca0106
cryptd                 28672  3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper            16384  1 aesni_intel
snd_seq_device         16384  1 snd_rawmidi
ac97_bus               16384  1 snd_ac97_codec
hid                   139264  3 usbhid,hid_holtek_mouse,hid_generic
snd_hda_core           94208  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
drm                   495616  6 drm_kms_helper,ttm,nouveau
pcspkr                 16384  0
snd_hwdep              16384  1 snd_hda_codec
r8168                 540672  0
fam15h_power           16384  0
k10temp                16384  0
snd_pcm               131072  7 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_ca0106,snd_hda_core
rfkill                 28672  5 cfg80211
snd_timer              36864  1 snd_pcm
agpgart                49152  3 ttm,nouveau,drm
sp5100_tco             16384  0
syscopyarea            16384  1 drm_kms_helper
snd                    98304  29 snd_hda_codec_generic,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_ac97_codec,snd_ca0106,snd_pcm,snd_rawmidi
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
i2c_piix4              24576  0
soundcore              16384  1 snd
fb_sys_fops            16384  1 drm_kms_helper
evdev                  24576  12
mac_hid                16384  0
wmi                    28672  2 mxm_wmi,nouveau
pcc_cpufreq            16384  0
acpi_cpufreq           24576  0
uinput                 20480  0
crypto_user            16384  0
ip_tables              28672  0
x_tables               45056  1 ip_tables
ext4                  733184  1
crc32c_generic         16384  0
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  126976  1 ext4
fscrypto               32768  1 ext4
sd_mod                 61440  6
ohci_pci               16384  0
ata_generic            16384  0
pata_acpi              16384  0
ahci                   40960  3
libahci                40960  1 ahci
pata_atiixp            16384  0
libata                278528  5 libahci,ahci,pata_acpi,ata_generic,pata_atiixp
firewire_ohci          45056  0
crc32c_intel           24576  2
firewire_core          81920  1 firewire_ohci
xhci_pci               16384  0
crc_itu_t              16384  1 firewire_core
scsi_mod              253952  4 sd_mod,usb_storage,uas,libata
xhci_hcd              266240  1 xhci_pci
ehci_pci               16384  0
ehci_hcd               94208  1 ehci_pci
ohci_hcd               57344  1 ohci_pci

hwinfo:

hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|drive\:|status\:|cmd\:|file\:|detected\:" |grep -v "Config Status"
  Model: "Qualcomm Atheros AR93xx Wireless Network Adapter"
  Device File: wlp6s0
  Link detected: no
    Driver Status: ath9k is active
    Driver Activation Cmd: "modprobe ath9k"
  Model: "Gigabyte Onboard Ethernet"
  Device File: enp5s0
  Link detected: yes
    Driver Status: r8169 is not active
    Driver Activation Cmd: "modprobe r8169"
    Driver Status: r8168 is active
    Driver Activation Cmd: "modprobe r8168"

It looks like your system can’t find a DHCP Server on your local network. Therefore you don’t get a IP which means no Internet.

You can try different things.

  • Set the IP manually in NetworkManager. You need to know a few addresses, like the gateway IP. But it is kind of easy.
  • Change the dhcp client software. By default NM uses it’s own implementation. But you can try different dhcp clients like dhclient or dhcpcd. I think they are installed by default. Read https://wiki.archlinux.org/index.php/NetworkManager#DHCP_client
  • You can try to change the driver (r8169). You Ethernet network card is not a really good one. If you search the forum you can find similar problems with that one. Blacklist r8168, reboot and try to connect again.

Sorry, I guess I just assume most people have phone tethering capabilities for uploading outputs.

@xabbu has given you excellent advice (as always).

1 Like

Thank you both for your replies.

Here is what I tried based on your recommendations:

  1. I selected manual, in the IPv4 method, with an address within my router’s dhcp’s range, the netmask and the proper gateway. I left DNS on automatic, but I tried using the one that is usually selected automatically as well as google’s. I was able to “connect” to something, but I still have no internet, nor do I have access to my router’s configurations browsing to its ip.
  2. dhcpcd was a working command so I assume it was installed. Following the wiki’s recommandation, I created the following file:
/etc/NetworkManager/conf.d/dhcp-client.conf

[main]
dhcp=dhcpcd

And rebooted. This did not change anything.

  1. I tried blacklisting the r8168 driver by adding the following file:
/etc/modprobe.d/eth.conf

blacklist r8168

After a reboot, when I run lspci -vv I get the following output in my ethernet card’s section:

[...]
kernle driver in us: r8169
kernel modules: r8169, r8168

Still no internet.

Isn’t it bizarre that I have no internet from both my interfaces? What modules do they use in common? The dhcp client?

If you have problems with getting an IP address using the internal DHCP client, consider dhclient as DHCP client.

Enable dhclient - Disable dhcpcd

Install dhclient if it is not already intalled.

sudo pacman -S dhclient

To create a config file which sets Network Manager to use the stand-alone dhclient program run this command:

echo -e "[main]\ndhcp=dhclient" | sudo tee /etc/NetworkManager/conf.d/dhclient.conf

NetworkManager is now set to call dhclient, which can sometimes conflict with dhcpd.

To disable the dhcpd service run these commands:

sudo systemctl stop dhcpcd.service

sudo systemctl disable dhcpcd.service

sudo systemctl status dhcpcd.service

sudo systemctl start dhclient

sudo systemctl enable dhclient

sudo systemctl status dhclient

You should not be enabling or starting the dhcpd service with NetworkManager. For almost all situations (except systemd-network) the dhcpcd deamon is started as needed by the appropriate service (netctl, NetworkManager, etc).

Delete:

/etc/NetworkManager/conf.d/dhcp-client.conf

Reboot.

I can’t run

sudo pacman -S dhclient

because I have no internet :
dhclient is a recognized command, but systemctl start dhclient tells me dhclient.service is not found.

I have a smart phone with usb tethering, but I can’t get the package that would allow me a connection :frowning:

dhclient should already be installed. Did you enable dhclient:

sudo systemctl enable dhclient

Woops, I tried to start before enabling.

Unfortunately:

Failed to enable unit: Unit file dhclient.service does not exist.

My apologies I thought dhclient was installed by default.

Do this instead.

Give your computer a static IP address via MAC address association in your routers config (if the option is available).

Then reboot your router and computer.

Well that’s offending, Manjaro now tells me my cable is unplugged:
Here is the closest thing to a static IP config I found in my router (an old DI-524):
image

I think dhclient is installed by default.

But the systemd config file uses a @, like dhclient@.service . You should be able to start it with dhclient@enp5s0.service . The part after the @ is the device name for which the dhcp client starts.

But I also think it is not necessary to start the service to use dhclient with NM. You only need to start the service if you don’t use the NM.

Are you dual booting Windows.

Reboot your router.

I was able to start the service! It made my ethernet interface reappear on gnome, but still no internet.

I am dual booting windows, and I tried rebooting my router. I’ll try again.

That is exactly what you want to configure the IP address to your MAC address.

Forum kindly sponsored by