[SOLVED] AMD issuse on Boot Again and again 😫

hello everyone

before this topic i just made this topic

after some stable update

video-hybrid-intel-ati-bumblebee

removed and switching with video-hybrid-intel-amdgpu-prime


when i install it
this message appear when i reboot

that is info’s about my device

inxi -G
Graphics:  Card-1: Intel HD Graphics 5500
           Card-2: Advanced Micro Devices [AMD/ATI] Topaz PRO [Radeon R5 M255]
           Display Server: x11 (X.Org 1.19.3) drivers: intel,amdgpu (unloaded: modesetting)
           Resolution: 1366x768@60.00hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2) version: 4.5 Mesa 17.1.4
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x68 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 5 associated providers: 0 name:Intel
Provider 1: id: 0x3f cap: 0x0 crtcs: 0 outputs: 0 associated providers: 0 name:AMD Radeon R5 M255 @ pci:0000:0a:00.0
DRI_PRIME=1 glxinfo | grep "OpenGL renderer"
amdgpu: Cannot create addrlib.
do_winsys_init: DRM version is 3.8.0 but this driver is only compatible with 2.12.0 (kernel 3.2) or later.
libGL error: failed to create dri screen
libGL error: failed to load driver: radeonsi
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2) 
lspci -nnk | grep "VGA\|'Kern'\|3D\|Display" -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09)
        Subsystem: Hewlett-Packard Company Device [103c:2248]
        Kernel driver in use: i915
--
0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz PRO [Radeon R5 M255] [1002:6901]
        Subsystem: Hewlett-Packard Company Device [103c:224a]
        Kernel driver in use: amdgpu
$ find /etc/X11 /etc/modules-load.d /etc/modprobe.d /usr/lib/modules-load.d/ /usr/lib/modprobe.d /usr/share/X11/xorg.conf.d -type f -name "*.conf" -print -execdir cat '{}' \; -execdir echo -e "\n====================" \;
/etc/X11/xorg.conf.d/00-keyboard.conf
# Read and parsed by systemd-localed. It's probably wise not to edit this file
# manually too freely.
Section "InputClass"
        Identifier "system-keyboard"
        MatchIsKeyboard "on"
        Option "XkbLayout" "us"
        Option "XkbModel" "pc105"
EndSection

====================
/etc/modules-load.d/modules.conf
# List of modules to load at boot

====================
/etc/modules-load.d/mhwd-gpu.conf
##
## Generated by mhwd - Manjaro Hardware Detection
##
 

====================
/etc/modprobe.d/mhwd-gpu.conf
##
## Generated by mhwd - Manjaro Hardware Detection
##
 

====================
/etc/modprobe.d/r8169_blacklist.conf
blacklist r8169

====================
/usr/lib/modules-load.d/cdrecord.conf
sg

====================
/usr/lib/modules-load.d/steam-uinput.conf
uinput

====================
/usr/lib/modprobe.d/bluetooth-usb.conf
# use "reset=1" as default, since it should be safe for recent devices and
# solves all kind of problems.
options btusb reset=1

====================
/usr/lib/modprobe.d/uvesafb.conf
#
# This file sets the parameters for uvesafb module.
# The following format should be used:
# options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
#
# For more details see:
# http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
#
 
options uvesafb mode_option=1024x768-32 scroll=ywrap

====================
/usr/share/X11/xorg.conf.d/40-libinput.conf
# Match on all types of devices but tablet devices and joysticks
Section "InputClass"
        Identifier "libinput pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

Section "InputClass"
        Identifier "libinput tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection

====================
/usr/share/X11/xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.


# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442 
Section "InputClass"
        Identifier "ThinkPad HDAPS accelerometer blacklist"
        MatchProduct "ThinkPad HDAPS accelerometer data"
        Option "Ignore" "on"
EndSection

# https://bugzilla.redhat.com/show_bug.cgi?id=523914
# Mouse does not move in PV Xen guest
# Explicitly tell evdev to not ignore the absolute axes.
Section "InputClass"
        Identifier "Xen Virtual Pointer axis blacklist"
        MatchProduct "Xen Virtual Pointer"
        Option "IgnoreAbsoluteAxes" "off"
        Option "IgnoreRelativeAxes" "off"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=55867
# Bug 55867 - Doesn't know how to tag XI_TRACKBALL
Section "InputClass"
        Identifier "Tag trackballs as XI_TRACKBALL"
        MatchProduct "trackball"
        MatchDriver "evdev"
        Option "TypeName" "TRACKBALL"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=62831
# Bug 62831 - Mionix Naos 5000 mouse detected incorrectly
Section "InputClass"
        Identifier "Tag Mionix Naos 5000 mouse XI_MOUSE"
        MatchProduct "La-VIEW Technology Naos 5000 Mouse"
        MatchDriver "evdev"
        Option "TypeName" "MOUSE"
EndSection

====================
/usr/share/X11/xorg.conf.d/10-evdev.conf
#
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

====================
 cat /var/log/Xorg.0.log
[    31.745] (--) Log file renamed from "/var/log/Xorg.pid-700.log" to "/var/log/Xorg.0.log"
[    31.760] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    31.760] X Protocol Version 11, Revision 0
[    31.760] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[    31.760] Current Operating System: Linux shado0ow-pc 4.9.37-1-MANJARO #1 SMP PREEMPT Thu Jul 13 06:40:16 UTC 2017 x86_64
[    31.760] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9-x86_64 root=UUID=c81496e1-52fd-4e06-828a-fea9c7ebef92 rw quiet
[    31.760] Build Date: 07 April 2017  05:42:48PM
[    31.760]  
[    31.760] Current version of pixman: 0.34.0
[    31.760]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    31.760] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.760] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 17 18:16:29 2017
[    31.792] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    31.792] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    31.820] (==) No Layout section.  Using the first Screen section.
[    31.820] (==) No screen section available. Using defaults.
[    31.820] (**) |-->Screen "Default Screen Section" (0)
[    31.820] (**) |   |-->Monitor "<default monitor>"
[    31.820] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    31.821] (==) Automatically adding devices
[    31.821] (==) Automatically enabling devices
[    31.821] (==) Automatically adding GPU devices
[    31.821] (==) Automatically binding GPU devices
[    31.821] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    31.875] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    31.875]    Entry deleted from font path.
[    31.875] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    31.875]    Entry deleted from font path.
[    31.875]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    31.875] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    31.875]    Entry deleted from font path.
[    31.875]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    31.875] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/OTF/
[    31.875] (==) ModulePath set to "/usr/lib/xorg/modules"
[    31.875] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.887] (II) Loader magic: 0x822d60
[    31.887] (II) Module ABI versions:
[    31.887]    X.Org ANSI C Emulation: 0.4
[    31.887]    X.Org Video Driver: 23.0
[    31.887]    X.Org XInput driver : 24.1
[    31.887]    X.Org Server Extension : 10.0
[    31.887] (++) using VT number 1

[    31.887] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    31.888] (II) xfree86: Adding drm device (/dev/dri/card0)
[    31.890] (II) xfree86: Adding drm device (/dev/dri/card1)
[    31.892] (--) PCI:*(0:0:2:0) 8086:1616:103c:2248 rev 9, Mem @ 0xd0000000/16777216, 0xc0000000/268435456, I/O @ 0x00007000/64, BIOS @ 0x????????/131072
[    31.892] (--) PCI: (0:10:0:0) 1002:6901:103c:224a rev 0, Mem @ 0xa0000000/268435456, 0xb0000000/2097152, 0xd1000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    31.893] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    31.893] (II) LoadModule: "glx"
[    31.922] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    32.080] (II) Module glx: vendor="X.Org Foundation"
[    32.080]    compiled for 1.19.3, module version = 1.0.0
[    32.080]    ABI class: X.Org Server Extension, version 10.0
[    32.080] (==) Matched intel as autoconfigured driver 0
[    32.080] (==) Matched ati as autoconfigured driver 1
[    32.080] (==) Matched intel as autoconfigured driver 2
[    32.080] (==) Matched modesetting as autoconfigured driver 3
[    32.080] (==) Matched fbdev as autoconfigured driver 4
[    32.080] (==) Matched vesa as autoconfigured driver 5
[    32.080] (==) Assigned the driver to the xf86ConfigLayout
[    32.080] (II) LoadModule: "intel"
[    32.083] (WW) Warning, couldn't open module intel
[    32.083] (II) UnloadModule: "intel"
[    32.083] (II) Unloading intel
[    32.083] (EE) Failed to load module "intel" (module does not exist, 0)
[    32.083] (II) LoadModule: "ati"
[    32.083] (WW) Warning, couldn't open module ati
[    32.083] (II) UnloadModule: "ati"
[    32.083] (II) Unloading ati
[    32.083] (EE) Failed to load module "ati" (module does not exist, 0)
[    32.083] (II) LoadModule: "modesetting"
[    32.083] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    32.090] (II) Module modesetting: vendor="X.Org Foundation"
[    32.090]    compiled for 1.19.3, module version = 1.19.3
[    32.090]    Module class: X.Org Video Driver
[    32.090]    ABI class: X.Org Video Driver, version 23.0
[    32.090] (II) LoadModule: "fbdev"
[    32.090] (WW) Warning, couldn't open module fbdev
[    32.090] (II) UnloadModule: "fbdev"
[    32.090] (II) Unloading fbdev
[    32.090] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    32.090] (II) LoadModule: "vesa"
[    32.090] (WW) Warning, couldn't open module vesa
[    32.090] (II) UnloadModule: "vesa"
[    32.090] (II) Unloading vesa
[    32.090] (EE) Failed to load module "vesa" (module does not exist, 0)
[    32.090] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    32.107] (II) modeset(0): using drv /dev/dri/card0
[    32.107] (II) modeset(G0): using drv /dev/dri/card1
[    32.107] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    32.107] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    32.107] (==) modeset(0): RGB weight 888
[    32.107] (==) modeset(0): Default visual is TrueColor
[    32.107] (II) Loading sub module "glamoregl"
[    32.107] (II) LoadModule: "glamoregl"
[    32.107] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    32.164] (II) Module glamoregl: vendor="X.Org Foundation"
[    32.164]    compiled for 1.19.3, module version = 1.0.0
[    32.164]    ABI class: X.Org ANSI C Emulation, version 0.4
[    32.164] (II) glamor: OpenGL accelerated X.org driver based.
[    32.496] (II) glamor: EGL version 1.4 (DRI2):
[    32.595] (II) modeset(0): glamor initialized
[    32.595] (II) modeset(0): Output eDP-1 has no monitor section
[    32.596] (II) modeset(0): Output HDMI-1 has no monitor section
[    32.596] (II) modeset(0): Output DP-1 has no monitor section
[    32.597] (II) modeset(0): Output HDMI-2 has no monitor section
[    32.598] (II) modeset(0): EDID for output eDP-1
[    32.598] (II) modeset(0): Manufacturer: LGD  Model: 465  Serial#: 0
[    32.598] (II) modeset(0): Year: 2014  Week: 0
[    32.598] (II) modeset(0): EDID Version: 1.4
[    32.598] (II) modeset(0): Digital Display Input
[    32.598] (II) modeset(0): 6 bits per channel
[    32.598] (II) modeset(0): Digital interface is DisplayPort
[    32.598] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    32.598] (II) modeset(0): Gamma: 2.20
[    32.598] (II) modeset(0): No DPMS capabilities specified
[    32.598] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    32.598] (II) modeset(0): First detailed timing is preferred mode
[    32.598] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    32.598] (II) modeset(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[    32.598] (II) modeset(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    32.598] (II) modeset(0): Manufacturer's mask: 0
[    32.598] (II) modeset(0): Supported detailed timing:
[    32.598] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[    32.598] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[    32.598] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.598] (II) modeset(0): Supported detailed timing:
[    32.598] (II) modeset(0): clock: 50.9 MHz   Image Size:  344 x 194 mm
[    32.598] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[    32.598] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    32.598] (II) modeset(0): Unknown vendor-specific block 2
[    32.598] (II) modeset(0): EDID (in hex):
[    32.598] (II) modeset(0):   00ffffffffffff0030e4650400000000
[    32.598] (II) modeset(0):   00180104952213780a05f59458569228
[    32.598] (II) modeset(0):   1e505400000001010101010101010101
[    32.598] (II) modeset(0):   010101010101d01d56f4500016303020
[    32.598] (II) modeset(0):   350058c21000001be01356f450001630
[    32.598] (II) modeset(0):   3020350058c21000001b000000000000
[    32.598] (II) modeset(0):   00000000000000000000000000000002
[    32.598] (II) modeset(0):   000c47ea0a3c6412161c6e0000000089
[    32.598] (II) modeset(0): Printing probed modes for output eDP-1
[    32.598] (II) modeset(0): Modeline "1366x768"x60.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    32.598] (II) modeset(0): Modeline "1366x768"x40.0   50.88  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    32.598] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    32.598] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    32.598] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    32.598] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    32.598] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    32.598] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    32.598] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    32.598] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    32.598] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    32.598] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    32.598] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    32.598] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    32.598] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    32.598] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    32.598] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    32.598] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    32.599] (II) modeset(0): EDID for output HDMI-1
[    32.599] (II) modeset(0): EDID for output DP-1
[    32.599] (II) modeset(0): EDID for output HDMI-2
[    32.599] (II) modeset(0): Output eDP-1 connected
[    32.599] (II) modeset(0): Output HDMI-1 disconnected
[    32.599] (II) modeset(0): Output DP-1 disconnected
[    32.599] (II) modeset(0): Output HDMI-2 disconnected
[    32.599] (II) modeset(0): Using exact sizes for initial modes
[    32.599] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    32.599] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    32.599] (==) modeset(0): DPI set to (96, 96)
[    32.599] (II) Loading sub module "fb"
[    32.599] (II) LoadModule: "fb"
[    32.600] (II) Loading /usr/lib/xorg/modules/libfb.so
[    32.623] (II) Module fb: vendor="X.Org Foundation"
[    32.623]    compiled for 1.19.3, module version = 1.0.0
[    32.623]    ABI class: X.Org ANSI C Emulation, version 0.4
[    32.624] (II) modeset(G0): Using 24bpp hw front buffer with 32bpp shadow
[    32.624] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    32.624] (==) modeset(G0): RGB weight 888
[    32.624] (==) modeset(G0): Default visual is TrueColor
[    32.624] (**) modeset(G0): Cannot use glamor with 24bpp packed fb
[    32.624] (II) modeset(G0): ShadowFB: preferred YES, enabled FORCE
[    32.624] (II) modeset(G0): Double-buffered shadow updates: off
[    32.624] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    32.624] (==) modeset(G0): DPI set to (96, 96)
[    32.624] (II) Loading sub module "fb"
[    32.624] (II) LoadModule: "fb"
[    32.624] (II) Loading /usr/lib/xorg/modules/libfb.so
[    32.624] (II) Module fb: vendor="X.Org Foundation"
[    32.624]    compiled for 1.19.3, module version = 1.0.0
[    32.624]    ABI class: X.Org ANSI C Emulation, version 0.4
[    32.624] (II) Loading sub module "shadow"
[    32.624] (II) LoadModule: "shadow"
[    32.624] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    32.636] (II) Module shadow: vendor="X.Org Foundation"
[    32.636]    compiled for 1.19.3, module version = 1.1.0
[    32.636]    ABI class: X.Org ANSI C Emulation, version 0.4
[    32.636] (==) Depth 24 pixmap format is 32 bpp
[    32.668] (==) modeset(G0): Backing store enabled
[    32.668] (==) modeset(G0): Silken mouse enabled
[    32.668] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    32.668] (==) modeset(G0): DPMS enabled
[    32.793] (==) modeset(0): Backing store enabled
[    32.793] (==) modeset(0): Silken mouse enabled
[    32.793] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    32.793] (==) modeset(0): DPMS enabled
[    32.793] (II) modeset(0): [DRI2] Setup complete
[    32.793] (II) modeset(0): [DRI2]   DRI driver: i965
[    32.793] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    32.793] (--) RandR disabled
[    32.822] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    32.822] (II) AIGLX: enabled GLX_ARB_create_context
[    32.822] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    32.822] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    32.822] (II) AIGLX: enabled GLX_INTEL_swap_event
[    32.822] (II) AIGLX: enabled GLX_SGI_swap_control
[    32.822] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    32.822] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    32.822] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    32.822] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    32.822] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    32.822] (II) AIGLX: Loaded and initialized i965
[    32.822] (II) GLX: Initialized DRI2 GL provider for screen 0
[    32.822] (II) modeset(G0): Damage tracking initialized
[    32.839] (II) modeset(0): Damage tracking initialized
[    32.839] (II) modeset(0): Setting screen physical size to 361 x 203
[    33.143] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    33.143] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.143] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    33.143] (**) Power Button: Applying InputClass "system-keyboard"
[    33.143] (II) LoadModule: "libinput"
[    33.143] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    33.211] (II) Module libinput: vendor="X.Org Foundation"
[    33.211]    compiled for 1.19.3, module version = 0.25.1
[    33.211]    Module class: X.Org XInput Driver
[    33.211]    ABI class: X.Org XInput driver, version 24.1
[    33.211] (II) Using input driver 'libinput' for 'Power Button'
[    33.211] (**) Power Button: always reports core events
[    33.211] (**) Option "Device" "/dev/input/event4"
[    33.211] (**) Option "_source" "server/udev"
[    33.211] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    33.211] (II) event4  - (II) Power Button: (II) device is a keyboard
[    33.211] (II) event4  - (II) Power Button: (II) device removed
[    33.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[    33.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.226] (**) Option "xkb_model" "pc105"
[    33.226] (**) Option "xkb_layout" "us"
[    33.227] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    33.227] (II) event4  - (II) Power Button: (II) device is a keyboard
[    33.227] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    33.227] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    33.227] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    33.227] (**) Video Bus: Applying InputClass "system-keyboard"
[    33.227] (II) Using input driver 'libinput' for 'Video Bus'
[    33.227] (**) Video Bus: always reports core events
[    33.227] (**) Option "Device" "/dev/input/event9"
[    33.227] (**) Option "_source" "server/udev"
[    33.228] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    33.228] (II) event9  - (II) Video Bus: (II) device is a keyboard
[    33.228] (II) event9  - (II) Video Bus: (II) device removed
[    33.246] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13/event9"
[    33.246] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    33.246] (**) Option "xkb_model" "pc105"
[    33.246] (**) Option "xkb_layout" "us"
[    33.248] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    33.248] (II) event9  - (II) Video Bus: (II) device is a keyboard
[    33.248] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    33.248] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    33.248] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    33.248] (**) Video Bus: Applying InputClass "system-keyboard"
[    33.248] (II) Using input driver 'libinput' for 'Video Bus'
[    33.248] (**) Video Bus: always reports core events
[    33.248] (**) Option "Device" "/dev/input/event10"
[    33.248] (**) Option "_source" "server/udev"
[    33.249] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    33.249] (II) event10 - (II) Video Bus: (II) device is a keyboard
[    33.249] (II) event10 - (II) Video Bus: (II) device removed
[    33.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:41/LNXVIDEO:01/input/input14/event10"
[    33.266] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    33.266] (**) Option "xkb_model" "pc105"
[    33.266] (**) Option "xkb_layout" "us"
[    33.268] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    33.268] (II) event10 - (II) Video Bus: (II) device is a keyboard
[    33.268] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    33.268] (II) No input driver specified, ignoring this device.
[    33.268] (II) This device may have been added with another device file.
[    33.269] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    33.269] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    33.269] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    33.269] (**) Sleep Button: Applying InputClass "system-keyboard"
[    33.269] (II) Using input driver 'libinput' for 'Sleep Button'
[    33.269] (**) Sleep Button: always reports core events
[    33.269] (**) Option "Device" "/dev/input/event2"
[    33.269] (**) Option "_source" "server/udev"
[    33.270] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    33.270] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    33.270] (II) event2  - (II) Sleep Button: (II) device removed
[    33.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[    33.296] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    33.296] (**) Option "xkb_model" "pc105"
[    33.296] (**) Option "xkb_layout" "us"
[    33.298] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    33.298] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    33.299] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[    33.299] (II) No input driver specified, ignoring this device.
[    33.299] (II) This device may have been added with another device file.
[    33.299] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event12)
[    33.299] (II) No input driver specified, ignoring this device.
[    33.299] (II) This device may have been added with another device file.
[    33.300] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[    33.300] (II) No input driver specified, ignoring this device.
[    33.300] (II) This device may have been added with another device file.
[    33.301] (II) config/udev: Adding input device HP HD Webcam (/dev/input/event16)
[    33.301] (**) HP HD Webcam: Applying InputClass "evdev keyboard catchall"
[    33.301] (**) HP HD Webcam: Applying InputClass "libinput keyboard catchall"
[    33.301] (**) HP HD Webcam: Applying InputClass "system-keyboard"
[    33.301] (II) Using input driver 'libinput' for 'HP HD Webcam'
[    33.301] (**) HP HD Webcam: always reports core events
[    33.301] (**) Option "Device" "/dev/input/event16"
[    33.301] (**) Option "_source" "server/udev"
[    33.302] (II) event16 - (II) HP HD Webcam: (II) is tagged by udev as: Keyboard
[    33.302] (II) event16 - (II) HP HD Webcam: (II) device is a keyboard
[    33.302] (II) event16 - (II) HP HD Webcam: (II) device removed
[    33.346] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input23/event16"
[    33.346] (II) XINPUT: Adding extended input device "HP HD Webcam" (type: KEYBOARD, id 10)
[    33.346] (**) Option "xkb_model" "pc105"
[    33.346] (**) Option "xkb_layout" "us"
[    33.347] (II) event16 - (II) HP HD Webcam: (II) is tagged by udev as: Keyboard
[    33.347] (II) event16 - (II) HP HD Webcam: (II) device is a keyboard
[    33.347] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[    33.347] (II) No input driver specified, ignoring this device.
[    33.347] (II) This device may have been added with another device file.
[    33.347] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[    33.347] (II) No input driver specified, ignoring this device.
[    33.347] (II) This device may have been added with another device file.
[    33.348] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    33.348] (II) No input driver specified, ignoring this device.
[    33.348] (II) This device may have been added with another device file.
[    33.348] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    33.348] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    33.348] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    33.348] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    33.348] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    33.348] (**) AT Translated Set 2 keyboard: always reports core events
[    33.348] (**) Option "Device" "/dev/input/event0"
[    33.348] (**) Option "_source" "server/udev"
[    33.348] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    33.348] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    33.348] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    33.386] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    33.386] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    33.386] (**) Option "xkb_model" "pc105"
[    33.386] (**) Option "xkb_layout" "us"
[    33.388] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    33.388] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    33.388] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    33.388] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    33.388] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    33.388] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    33.388] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    33.388] (**) Option "Device" "/dev/input/event15"
[    33.388] (**) Option "_source" "server/udev"
[    33.389] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[    33.389] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[    33.389] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[    33.426] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input20/event15"
[    33.426] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    33.427] (**) Option "AccelerationScheme" "none"
[    33.427] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    33.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    33.427] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    33.427] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[    33.427] (II) event15 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[    33.427] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    33.427] (II) No input driver specified, ignoring this device.
[    33.427] (II) This device may have been added with another device file.
[    33.427] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[    33.427] (II) No input driver specified, ignoring this device.
[    33.427] (II) This device may have been added with another device file.
[    33.428] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    33.428] (II) No input driver specified, ignoring this device.
[    33.428] (II) This device may have been added with another device file.
[    33.428] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[    33.428] (II) No input driver specified, ignoring this device.
[    33.428] (II) This device may have been added with another device file.
[    33.428] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event17)
[    33.428] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    33.428] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    33.428] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[    33.428] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    33.428] (**) HP WMI hotkeys: always reports core events
[    33.428] (**) Option "Device" "/dev/input/event17"
[    33.428] (**) Option "_source" "server/udev"
[    33.429] (II) event17 - (II) HP WMI hotkeys: (II) is tagged by udev as: Keyboard Switch
[    33.429] (II) event17 - (II) HP WMI hotkeys: (II) device is a keyboard
[    33.429] (II) event17 - (II) HP WMI hotkeys: (II) device removed
[    33.446] (**) Option "config_info" "udev:/sys/devices/virtual/input/input24/event17"
[    33.446] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    33.446] (**) Option "xkb_model" "pc105"
[    33.446] (**) Option "xkb_layout" "us"
[    33.447] (II) event17 - (II) HP WMI hotkeys: (II) is tagged by udev as: Keyboard Switch
[    33.448] (II) event17 - (II) HP WMI hotkeys: (II) device is a keyboard
[    33.448] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event1)
[    33.448] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    33.448] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    33.448] (**) HP Wireless hotkeys: Applying InputClass "system-keyboard"
[    33.448] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    33.448] (**) HP Wireless hotkeys: always reports core events
[    33.448] (**) Option "Device" "/dev/input/event1"
[    33.448] (**) Option "_source" "server/udev"
[    33.449] (II) event1  - (II) HP Wireless hotkeys: (II) is tagged by udev as: Keyboard
[    33.449] (II) event1  - (II) HP Wireless hotkeys: (II) device is a keyboard
[    33.449] (II) event1  - (II) HP Wireless hotkeys: (II) device removed
[    33.486] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event1"
[    33.486] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 14)
[    33.486] (**) Option "xkb_model" "pc105"
[    33.486] (**) Option "xkb_layout" "us"
[    33.487] (II) event1  - (II) HP Wireless hotkeys: (II) is tagged by udev as: Keyboard
[    33.487] (II) event1  - (II) HP Wireless hotkeys: (II) device is a keyboard
[    60.412] (II) modeset(0): EDID vendor "LGD", prod id 1125
[    60.412] (II) modeset(0): Printing DDC gathered Modelines:
[    60.412] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    60.412] (II) modeset(0): Modeline "1366x768"x0.0   50.88  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)
[    66.914] (II) modeset(0): EDID vendor "LGD", prod id 1125
[    66.914] (II) modeset(0): Printing DDC gathered Modelines:
[    66.914] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[    66.914] (II) modeset(0): Modeline "1366x768"x0.0   50.88  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (31.6 kHz e)

that is info which you always asked @anon35400795 :innocent:

i rewrite this topic because the driver profile updated
but the problem is still
what should i do for this
i can’t use this distro and use windows for long time :face_with_head_bandage:

update
when i boot from grub command after enter amdgpu.dpm=0
error message on login disappear but this issuse is update

DRI_PRIME=1 glxinfo | grep "OpenGL renderer"amdgpu: Cannot create addrlib.
do_winsys_init: DRM version is 3.8.0 but this driver is only compatible with 2.12.0 (kernel 3.2) or later.
libGL error: failed to create dri screen
libGL error: failed to load driver: radeonsi
amdgpu: Cannot create addrlib.
do_winsys_init: DRM version is 3.8.0 but this driver is only compatible with 2.12.0 (kernel 3.2) or later.
libGL error: failed to create dri screen
libGL error: failed to load driver: radeonsi
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 4.0, 256 bits)

thanks for all

Instead of using the proprietary AMD hybrid driver have you tried the radeon open source alternative?

video-hybrid-intel-radeon-prime

that is message which appear to me

i just solve it simply
by using kernel 4.4
no message on login
no libs missing
not anything

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by Bytemark