Slow wifi and ethernet on manjaro kde

I’m running manjaro KDE on linux 5.15.25 and both my wifi and ethernet connections are rather slow. I have a 70 MB/s connection and my top speed is just 10 MB/s. I have tried this suggestions without any luck.

Here’s my inxi -v7azy output:

System:
  Kernel: 5.15.28-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
    root=UUID=88e3dd5d-83be-4ff2-99d2-93d811022b75 rw quiet
    resume=UUID=1064ebc4-cfdb-44a4-bc7f-9a0557afa4ee udev.log_priority=3
  Desktop: KDE Plasma 5.24.3 tk: Qt 5.15.3 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: ROG Strix G731GT_G731GT v: 1.0
    serial: <superuser required>
  Mobo: ASUSTeK model: G731GT v: 1.0 serial: <superuser required>
    UEFI: American Megatrends v: G731GT.307 date: 04/28/2020
Battery:
  ID-1: BAT0 charge: 40.2 Wh (100.0%) condition: 40.2/50.5 Wh (79.5%)
    volts: 12.5 min: 12.5 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
    status: Not charging
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse MX Master 3
    serial: <filter> charge: 100% (should be ignored) rechargeable: yes
    status: Discharging
Memory:
  RAM: total: 15.48 GiB used: 2.96 GiB (19.1%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i7-9750H bits: 64 type: MT MCP arch: Coffee Lake
    family: 6 model-id: 0x9E (158) stepping: 0xA (10) microcode: 0xEC
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
    L3: 12 MiB desc: 1x12 MiB
  Speed (MHz): avg: 2893 high: 4194 min/max: 800/4500 scaling:
    driver: intel_pstate governor: powersave cores: 1: 1060 2: 1954 3: 4124
    4: 4194 5: 4138 6: 4124 7: 3164 8: 2060 9: 1487 10: 900 11: 3334 12: 4180
    bogomips: 62431
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt
    cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
    epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
    ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid
    invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr mtrr
    nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln
    pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep smap
    smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
    tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave
    xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: conditional, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: ASUSTeK
    driver: i915 v: kernel ports: active: eDP-1 empty: none bus-ID: 00:02.0
    chip-ID: 8086:3e9b class-ID: 0300
  Device-2: NVIDIA TU117M [GeForce GTX 1650 Mobile / Max-Q] vendor: ASUSTeK
    driver: nvidia v: 510.54 alternate: nouveau,nvidia_drm pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports:
    active: none off: HDMI-A-1 empty: none bus-ID: 01:00.0 chip-ID: 10de:1f91
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
    loaded: modesetting,nvidia gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1013x285mm (39.9x11.2")
    s-diag: 1052mm (41.4")
  Monitor-1: HDMI-0 pos: primary,left res: 1920x1080 hz: 60 dpi: 94
    size: 521x293mm (20.5x11.5") diag: 598mm (23.5")
  Monitor-2: eDP-1-1 pos: right res: 1920x1080 hz: 60 dpi: 128
    size: 382x215mm (15.0x8.5") diag: 438mm (17.3")
  OpenGL: renderer: NVIDIA GeForce GTX 1650/PCIe/SSE2 v: 4.6.0 NVIDIA 510.54
    direct render: Yes
Audio:
  Device-1: Intel Cannon Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:a348 class-ID: 0403
  Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10fa
    class-ID: 0403
  Sound Server-1: ALSA v: k5.15.28-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK driver: r8168 v: 8.049.02-NAPI modules: r8169 pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eno2 state: down mac: <filter>
  WAN IP: <filter>

Disable mac address randomization

Disable IPv6

I have problems disabling mac addres randomization, since the boot promtI get an NetworkManager error and I have to delete wifi.scan-rand-mac-address=no. Here’s the log and the service status

journalctl -xeu NetworkManager.service
mar 21 03:18:59 adrian-manjaro NetworkManager[1605]: Failed to read configuration: /etc/NetworkManager/NetworkManag>
mar 21 03:18:59 adrian-manjaro systemd[1]: NetworkManager.service: Main process exited, code=exited, status=1/FAILU>
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ An ExecStart= process belonging to unit NetworkManager.service has exited.
░░ 
░░ The process' exit code is 'exited' and its exit status is 1.
mar 21 03:18:59 adrian-manjaro systemd[1]: NetworkManager.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ The unit NetworkManager.service has entered the 'failed' state with result 'exit-code'.
mar 21 03:18:59 adrian-manjaro systemd[1]: Failed to start Network Manager.
░░ Subject: A start job for unit NetworkManager.service has failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ A start job for unit NetworkManager.service has finished with a failure.
░░ 
░░ The job identifier is 2566 and the job result is failed.
mar 21 03:18:59 adrian-manjaro systemd[1]: NetworkManager.service: Scheduled restart job, restart counter is at 5.
░░ Subject: Automatic restarting of a unit has been scheduled
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ Automatic restarting of the unit NetworkManager.service has been scheduled, as the result for
░░ the configured Restart= setting for the unit.
mar 21 03:18:59 adrian-manjaro systemd[1]: Stopped Network Manager.
░░ Subject: A stop job for unit NetworkManager.service has finished
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ A stop job for unit NetworkManager.service has finished.
░░ 
░░ The job identifier is 2667 and the job result is done.
mar 21 03:18:59 adrian-manjaro systemd[1]: NetworkManager.service: Start request repeated too quickly.
mar 21 03:18:59 adrian-manjaro systemd[1]: NetworkManager.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ The unit NetworkManager.service has entered the 'failed' state with result 'exit-code'.
mar 21 03:18:59 adrian-manjaro systemd[1]: Failed to start Network Manager.
░░ Subject: A start job for unit NetworkManager.service has failed
░░ Defined-By: systemd
░░ Support: https://forum.manjaro.org/c/support
░░ 
░░ A start job for unit NetworkManager.service has finished with a failure.
░░ 
░░ The job identifier is 2667 and the job result is failed.

NetworkManager.service - Network Manager
     Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled; vendor preset: disabled)
    Drop-In: /usr/lib/systemd/system/NetworkManager.service.d
             └─NetworkManager-ovs.conf
     Active: failed (Result: exit-code) since Mon 2022-03-21 03:18:18 CST; 5s ago
       Docs: man:NetworkManager(8)
    Process: 1517 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=1/FAILURE)
   Main PID: 1517 (code=exited, status=1/FAILURE)
        CPU: 13ms

mar 21 03:18:18 adrian-manjaro systemd[1]: NetworkManager.service: Scheduled restart job, restart counter is at 5.
mar 21 03:18:18 adrian-manjaro systemd[1]: Stopped Network Manager.
mar 21 03:18:18 adrian-manjaro systemd[1]: NetworkManager.service: Start request repeated too quickly.
mar 21 03:18:18 adrian-manjaro systemd[1]: NetworkManager.service: Failed with result 'exit-code'.
mar 21 03:18:18 adrian-manjaro systemd[1]: Failed to start Network Manager.

I fixed it now, I forgot to add the [device] part (heh), but I am still getting 10 MB/s speeds.

Bump bump

Posting a single word or useless message (bumping) to attract attention to your thread is not allowed. Do your own research, continue to troubleshoot, post the results, and be patient with the community. If people are reading your thread without answering or offering help, you may try supplying more details, or ask to be pointed in the right direction. Often, the reason for posts remaining unanswered is due in large part to the sparse details in the original post itself, or, the obvious availability of solutions in the wiki, on the forum or on the web, and the community’s unwillingness to point out the obvious.