This is a new thing happening since this week. I can’t recognise to have changed something. If I do not move the mouse (or type something), it just blanks after 1min, even though the settings say, that I blank the screen after 10min.
Also, when it blanks, I can directly go back to business after moving the mouse, without any question about the password or such. I use Gnome.
Those are my system information:
System:
Kernel: 6.1.38-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1-x86_64
root=UUID=0d01ed0a-7107-4643-800a-2773dc961698 rw rootflags=subvol=@ quiet
cryptdevice=UUID=42bff48f-65a3-4aa1-981e-20b01eb11185:luks-42bff48f-65a3-4aa1-981e-20b01eb11185
root=/dev/mapper/luks-42bff48f-65a3-4aa1-981e-20b01eb11185 splash
apparmor=1 security=apparmor
resume=/dev/mapper/luks-38ae6655-ae99-452e-b2ee-52199fdd7cac
udev.log_priority=3
Desktop: GNOME v: 44.3 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 44.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B550M AORUS ELITE v: x.x serial: N/A
UEFI: American Megatrends LLC. v: F13a date: 01/27/2021
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 32 GiB available: 31.29 GiB used: 8.84 GiB (28.3%)
Array-1: capacity: 128 GiB slots: 4 modules: 2 EC: None
max-module-size: 32 GiB note: est.
Device-1: DIMM 0 type: no module installed
Device-2: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2666 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
width (bits): data: 64 total: 64 manufacturer: G.Skill
part-no: F4-3600C18-16GVK serial: N/A
Device-3: DIMM 0 type: no module installed
Device-4: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2666 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
width (bits): data: 64 total: 64 manufacturer: G.Skill
part-no: F4-3600C18-16GVK serial: N/A
CPU:
Info: model: AMD Ryzen 5 5600X socket: AM4 bits: 64 type: MT MCP arch: Zen 3+
gen: 4 level: v3 note: check built: 2022 process: TSMC n6 (7nm)
family: 0x19 (25) model-id: 0x21 (33) stepping: 0 microcode: 0xA201009
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 32 MiB
desc: 1x32 MiB
Speed (MHz): avg: 2325 high: 3700 min/max: 2200/4650 boost: enabled
base/boost: 3700/4650 scaling: driver: acpi-cpufreq governor: schedutil
volts: 1.1 V ext-clock: 100 MHz cores: 1: 2200 2: 2200 3: 2200 4: 2200
5: 2200 6: 2200 7: 3700 8: 2200 9: 2200 10: 2200 11: 2200 12: 2200
bogomips: 88679
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU116 [GeForce GTX 1650] vendor: Gigabyte driver: nvidia
v: 535.54.03 alternate: nouveau,nvidia_drm non-free: 535.xx+
status: current (as of 2023-07) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-22 pcie: gen: 2 speed: 5 GT/s lanes: 16
link-max: gen: 3 speed: 8 GT/s bus-ID: 07:00.0 chip-ID: 10de:2188
class-ID: 0300
Device-2: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1:2 chip-ID: 046d:081b
class-ID: 0102 serial: <filter>
Display: server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.2
compositor: gnome-shell driver: X: loaded: nvidia gpu: nvidia display-ID: :1
screens: 1
Screen-1: 0 s-res: 5120x1440 s-size: <missing: xdpyinfo>
Monitor-1: DP-0 pos: right res: 2560x1440 hz: 60 dpi: 118
size: 553x311mm (21.77x12.24") diag: 634mm (24.98") modes: N/A
Monitor-2: HDMI-0 pos: primary,left res: 2560x1440 hz: 60 dpi: 118
size: 553x311mm (21.77x12.24") diag: 634mm (24.98") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 535.54.03 renderer: NVIDIA GeForce GTX
1650/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: NVIDIA TU116 High Definition Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 07:00.1 chip-ID: 10de:1aeb class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 09:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Logitech Webcam C310 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1:2 chip-ID: 046d:081b
class-ID: 0102 serial: <filter>
API: ALSA v: k6.1.38-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.74 status: n/a (root, process) tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active (root, process)
with: pulseaudio-alsa type: plugin tools: pacat,pactl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 8086:2725
class-ID: 0280
IF: wlp4s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 06:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:7 chip-ID: 8087:0032
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 8 state: up address: see --recommends
Logical:
Message: No logical block device data found.
Device-1: luks-42bff48f-65a3-4aa1-981e-20b01eb11185 maj-min: 254:0
type: LUKS dm: dm-0 size: 922.41 GiB
Components:
p-1: nvme1n1p2 maj-min: 259:6 size: 922.42 GiB
Device-2: luks-38ae6655-ae99-452e-b2ee-52199fdd7cac maj-min: 254:1
type: LUKS dm: dm-1 size: 8.8 GiB
Components:
p-1: nvme1n1p3 maj-min: 259:7 size: 8.8 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.36 TiB used: 256.09 GiB (18.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 500GB size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 2B2QEXM7 temp: 35.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 2B2QEXM7 temp: 37.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 922.41 GiB size: 922.41 GiB (100.00%)
used: 256.08 GiB (27.8%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-42bff48f-65a3-4aa1-981e-20b01eb11185 label: N/A
uuid: 0d01ed0a-7107-4643-800a-2773dc961698
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 752 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme1n1p1
maj-min: 259:5 label: N/A uuid: F2E3-4409
ID-3: /home raw-size: 922.41 GiB size: 922.41 GiB (100.00%)
used: 256.08 GiB (27.8%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-42bff48f-65a3-4aa1-981e-20b01eb11185 label: N/A
uuid: 0d01ed0a-7107-4643-800a-2773dc961698
ID-4: /var/cache raw-size: 922.41 GiB size: 922.41 GiB (100.00%)
used: 256.08 GiB (27.8%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-42bff48f-65a3-4aa1-981e-20b01eb11185 label: N/A
uuid: 0d01ed0a-7107-4643-800a-2773dc961698
ID-5: /var/log raw-size: 922.41 GiB size: 922.41 GiB (100.00%)
used: 256.08 GiB (27.8%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-42bff48f-65a3-4aa1-981e-20b01eb11185 label: N/A
uuid: 0d01ed0a-7107-4643-800a-2773dc961698
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/dm-1 maj-min: 254:1
mapped: luks-38ae6655-ae99-452e-b2ee-52199fdd7cac label: swap
uuid: 5ca8ef2a-4fb0-46d1-b921-f91756e81df0
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:2 size: 512 MiB fs: vfat label: N/A
uuid: 6767-C67B
ID-2: /dev/nvme0n1p2 maj-min: 259:3 size: 4 GiB fs: swap label: N/A
uuid: 4bea963b-6f67-4eab-8b89-df3f32ed597c
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-1:2 info: Logitech Webcam C310 type: video,audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 046d:081b class-ID: 0102 serial: <filter>
Device-2: 1-5:3 info: Logitech G631 Keyboard type: keyboard,mouse,HID
driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 98mA chip-ID: 046d:c53d class-ID: 0300
Hub-2: 1-6:4 info: Realtek RTS5411 Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411
class-ID: 0900
Device-1: 1-7:7 info: Intel AX210 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0032 class-ID: e001
Device-2: 1-10:6 info: Integrated Express RGB LED Controller type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 048d:5702 class-ID: 0300
Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-5: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-6: 5-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-7: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 49.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 434 Uptime: 2d 3h 7m wakeups: 12 Init: systemd v: 253
default: graphical tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7
Packages: pm: pacman pkgs: 1449 libs: 398
tools: gnome-software,pamac,trizen,yay pm: flatpak pkgs: 0 Shell: Sudo (sudo)
v: 1.9.14p1 default: Bash v: 5.1.16 running-in: gnome-terminal inxi: 3.3.28
I have seen a couple of posts in the Internet about this, but none of them got a reply. But it seems I am not the first one.
Does anybody have a clue?
