Anything to be worried about?

I think thats ok, nothing to do?

[john1@manjaro ~]$ journalctl -b -p err
Mai 24 13:17:34 manjaro kernel: Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!
Mai 24 13:17:34 manjaro kernel: pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid
Mai 24 13:17:34 manjaro systemd-udevd[290]: /etc/udev/rules.d/40-libsane.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
Mai 24 13:17:34 manjaro systemd-udevd[290]: /etc/udev/rules.d/S99-2000S1.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
Mai 24 13:17:35 manjaro kernel: i801_smbus 0000:00:1f.4: Transaction timeout
Mai 24 13:17:35 manjaro kernel: i801_smbus 0000:00:1f.4: Failed terminating the transaction
Mai 24 13:17:35 manjaro kernel: i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
Mai 24 13:17:35 manjaro kernel: intel-spi 0000:00:1f.5: invalid resource
Mai 24 13:17:35 manjaro kernel: 
Mai 24 13:17:36 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20210730/evgpe-839)
Mai 24 13:17:36 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20210730/evgpe-839)
Mai 24 13:17:36 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20210730/evgpe-839)
Mai 24 13:17:36 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20210730/evgpe-839)
Mai 24 13:17:36 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20210730/evgpe-839)
Mai 24 13:17:36 manjaro kernel: ACPI Error: No handler or method for GPE 43, disabling event (20210730/evgpe-839)
Mai 24 13:17:36 manjaro kernel: sd 1:0:0:0: [sda] No Caching mode page found
Mai 24 13:17:36 manjaro kernel: sd 1:0:0:0: [sda] Assuming drive cache: write through
Mai 24 13:17:36 manjaro kernel: sd 0:0:0:0: [sdb] No Caching mode page found
Mai 24 13:17:36 manjaro kernel: sd 0:0:0:0: [sdb] Assuming drive cache: write through
Mai 24 13:17:38 manjaro kernel: snd_hda_codec_hdmi ehdaudio0D2: Monitor plugged-in, Failed to power up codec ret=[-13]
Mai 24 13:18:00 manjaro kernel: irq 9: nobody cared (try booting with the "irqpoll" option)
Mai 24 13:18:00 manjaro kernel: handlers:
Mai 24 13:18:00 manjaro kernel: [<00000000bac4a753>] acpi_irq
Mai 24 13:18:00 manjaro kernel: Disabling IRQ #9

Comments?

Info:

Generated on 2022-05-24 16:56:1653404166

#################### inxi -Fxzc0 ########################

System:
  Kernel: 5.15.41-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.1.0 Desktop: Xfce v: 4.16.0
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: LENOVO product: 81RS v: Lenovo Yoga S740-14IIL serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN serial: <superuser required> UEFI: LENOVO
    v: BYCN39WW date: 05/28/2021
Battery:
  ID-1: BAT0 charge: 62.5 Wh (95.7%) condition: 65.3/62.0 Wh (105.3%) volts: 17.0 min: 15.4
    model: LGC L19L4PD2 status: full
CPU:
  Info: quad core model: Intel Core i7-1065G7 bits: 64 type: MT MCP arch: Ice Lake rev: 5 cache:
    L1: 320 KiB L2: 2 MiB L3: 8 MiB
  Speed (MHz): avg: 1277 high: 1371 min/max: 400/3900 cores: 1: 1371 2: 1159 3: 1300 4: 1300
    5: 1263 6: 1223 7: 1300 8: 1300 bogomips: 23968
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Iris Plus Graphics G7 vendor: Lenovo driver: i915 v: kernel bus-ID: 00:02.0
  Device-2: NVIDIA GP108M [GeForce MX250] vendor: Lenovo driver: nvidia v: 510.73.05
    arch: Pascal bus-ID: 2b:00.0
  Device-3: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 3-5:5
  Display: x11 server: X.Org v: 21.1.3 driver: X: loaded: modesetting,nvidia unloaded: nouveau
    gpu: i915 resolution: 1: 1920x1080~60Hz 2: N/A
  OpenGL: renderer: Mesa Intel Iris Plus Graphics (ICL GT2) v: 4.6 Mesa 22.0.4
    direct render: Yes
Audio:
  Device-1: Intel Ice Lake-LP Smart Sound Audio vendor: Lenovo driver: sof-audio-pci-intel-icl
    bus-ID: 00:1f.3
  Sound Server-1: ALSA v: k5.15.41-1-MANJARO running: yes
  Sound Server-2: sndio v: N/A running: no
  Sound Server-3: PulseAudio v: 15.0 running: no
  Sound Server-4: PipeWire v: 0.3.51 running: yes
Network:
  Device-1: Intel Ice Lake-LP PCH CNVi WiFi driver: iwlwifi v: kernel bus-ID: 00:14.3
  IF: wlp0s20f3 state: up mac: <filter>
  Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-1.4:4
  IF: enp0s13f0u1u4 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: pan1 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-10:8
  Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends
Drives:
  Local Storage: total: 1.86 TiB used: 356.2 GiB (18.7%)
  ID-1: /dev/nvme0n1 vendor: Micron model: MTFDHBA1T0TCK size: 953.87 GiB temp: 43.9 C
  ID-2: /dev/sda type: USB vendor: Kingston model: DataTraveler 2.0 size: 14.54 GiB
  ID-3: /dev/sdb type: USB vendor: Western Digital model: WD10EARX-00N0YB0 size: 931.51 GiB
Partition:
  ID-1: / size: 57.85 GiB used: 34.5 GiB (59.6%) fs: ext4 dev: /dev/nvme0n1p8
  ID-2: /boot/efi size: 259.5 MiB used: 113.6 MiB (43.8%) fs: vfat dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 16.67 GiB used: 0 KiB (0.0%) dev: /dev/nvme0n1p9
Sensors:
  System Temperatures: cpu: 48.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 278 Uptime: 3h 38m Memory: 15.2 GiB used: 2.61 GiB (17.2%) Init: systemd Compilers:
  gcc: 12.1.0 clang: 13.0.1 Packages: 1730 Client: Unknown Client: wrapper-2.0 inxi: 3.3.16



1 Like

I think there is nothing to worry about

Do you have any actual issue?

No issues, that is confirmed now, thanks for your answers!

Wondering: Is there anybody that has a “clean” log if executing journalctl -b -p err?

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.