Hallo,
ich habe nochmal eine (vermutlich) letzte Nebenstelle für die richtige Anwendung von bestimmten Anwendungen.
System: gnome
Anwendungen: WordQuiz (kwordquiz), (KDE_connect)
Das Problem: ich habe in Kwordquiz teilweise schwarze Schrift auf schwarzem Grund.
Also ein geringer Kontrast ist schon da, aber äußerst schwer zu sehen. Den Screenshot spare ich mir.
System
System:
Kernel: 6.12.61-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
root=UUID=42e9325b-30e0-4e85-935b-567bdc91070f rw quiet splash apparmor=1
security=apparmor resume=UUID=548284c1-8490-4d9d-abfa-e43e96a70ddd
udev.log_priority=3
Desktop: GNOME v: 49.2 tk: GTK v: 3.24.51 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 49.2 Distro: Manjaro
base: Arch Linux
Machine:
Type: Convertible System: LENOVO product: 20LES4P71F v: ThinkPad X1 Yoga 3rd
serial: <superuser required> Chassis: type: 31 serial: <superuser required>
Mobo: LENOVO model: 20LES4P71F v: SDK0J40697 WIN
serial: <superuser required> part-nu: LENOVO_MT_20LE_BU_Think_FM_ThinkPad
X1 Yoga 3rd uuid: <superuser required> Firmware: UEFI vendor: LENOVO
v: N25ET68W (1.54 ) date: 08/22/2024
Battery:
ID-1: BAT0 charge: 33 Wh (79.5%) condition: 41.5/54.1 Wh (76.8%) volts: 16.3
min: 15.36 model: Celxpert 01AV475 type: Li-poly serial: <filter> charging:
status: not charging control: start: 75% end: 80% cycles: 739
Memory:
System RAM: total: 8 GiB available: 7.51 GiB used: 3.35 GiB (44.6%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 8 GiB slots: 2 modules: 2 EC: None
max-module-size: 4 GiB note: est.
Device-1: ChannelA-DIMM0 type: LPDDR3 detail: synchronous unbuffered
(unregistered) size: 4 GiB speed: 2133 MT/s volts: curr: 1 width (bits):
data: 64 total: 64 manufacturer: SK Hynix part-no: H9CCNNNBJTALAR-NVD
serial: N/A
Device-2: ChannelB-DIMM0 type: LPDDR3 detail: synchronous unbuffered
(unregistered) size: 4 GiB speed: 2133 MT/s volts: curr: 1 width (bits):
data: 64 total: 64 manufacturer: SK Hynix part-no: H9CCNNNBJTALAR-NVD
serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-8350U bits: 64 type: MT MCP arch: Coffee Lake
gen: core 8 level: v3 note: check built: 2017 process: Intel 14nm family: 6
model-id: 0x8E (142) stepping: 0xA (10) microcode: 0xF6
Topology: cpus: 1x dies: 1 clusters: 4 cores: 4 threads: 8 tpc: 2
smt: enabled cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB
desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 400 min/max: 400/3600 scaling: driver: intel_pstate
governor: powersave cores: 1: 400 2: 400 3: 400 4: 400 5: 400 6: 400 7: 400
8: 400 bogomips: 30409
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr
mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep
sgx smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm
tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic
xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds mitigation: Microcode
Type: tsa status: Not affected
Type: tsx_async_abort mitigation: TSX disabled
Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel
arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1
empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:5917
class-ID: 0300
Device-2: Chicony Integrated IR Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:2 chip-ID: 04f2:b605
class-ID: 0e02 serial: <filter>
Device-3: Chicony Integrated Camera (1280x720@30) driver: uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:4
chip-ID: 04f2:b604 class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.21 with: Xwayland v: 24.1.9
compositor: gnome-shell driver: gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: ChiMei InnoLux 0x14e1 built: 2017 res: 1920x1080
dpi: 158 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600
blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329
size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9
modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris wayland:
drv: iris x11: drv: iris
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.3.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics 620 (KBL
GT2) device-ID: 8086:5917 memory: 7.33 GiB unified: yes display-ID: :0.0
Info: Tools: api: eglinfo,glxinfo x11: xprop
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3
chip-ID: 8086:9d71 class-ID: 0403
API: ALSA v: k6.12.61-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 1.4.9 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel
port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15d7 class-ID: 0200
IF: enp0s31f6 state: down mac: <filter>
Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:24fd
class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:3 chip-ID: 8087:0a2b
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 238.47 GiB used: 49.82 GiB (20.9%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVLB256HBHQ-000L7 size: 238.47 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 5M2QEXH7 temp: 36.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 229.38 GiB size: 224.72 GiB (97.97%)
used: 49.82 GiB (22.2%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: 42e9325b-30e0-4e85-935b-567bdc91070f
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 324 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
uuid: D607-BC92
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p3 maj-min: 259:3 label: swap
uuid: 548284c1-8490-4d9d-abfa-e43e96a70ddd
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-5:2 info: Chicony Integrated IR Camera type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b605 class-ID: 0e02
serial: <filter>
Device-2: 1-7:3 info: Intel Bluetooth wireless interface type: bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 100mA chip-ID: 8087:0a2b class-ID: e001
Device-3: 1-8:4 info: Chicony Integrated Camera (1280x720@30) type: video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b604 class-ID: 0e02
serial: <filter>
Device-4: 1-9:5 info: Synaptics Metallica MIS Touch Fingerprint Reader
type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 06cb:009a class-ID: ff00 serial: <filter>
Device-5: 1-10:6 info: Wacom Pen and multitouch sensor type: HID
driver: usbhid,wacom interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 400mA chip-ID: 056a:5148 class-ID: 0300
Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 2-3:2 info: Realtek USB3.0-CRW type: mass storage
driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s)
lanes: 1 mode: 3.2 gen-1x1 power: 800mA chip-ID: 0bda:0328 class-ID: 0806
serial: <filter>
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 55.0 C pch: 53.0 C mobo: N/A
Fan Speeds (rpm): fan-1: 0
Repos:
Packages: 1598 pm: pacman pkgs: 1582 libs: 386 tools: gnome-software,pamac
pm: flatpak pkgs: 16
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirrors2.manjaro.org/stable/$repo/$arch
2: https://mirrors.manjaro.org/repo/stable/$repo/$arch
Processes:
CPU top: 5 of 280
1: cpu: 100% command: ps pid: 5273 mem: 4.17 MiB (0.0%)
2: cpu: 8.9% command: gnome-shell pid: 2197 mem: 340.4 MiB (4.4%)
3: cpu: 4.9% command: vivaldi-bin pid: 3728 mem: 268.5 MiB (3.4%)
4: cpu: 4.2% command: vivaldi-bin pid: 5014 mem: 221.9 MiB (2.8%)
5: cpu: 2.2% command: localsearch-extractor-3 pid: 5248
mem: 47.3 MiB (0.6%)
Memory top: 5 of 280
1: mem: 420.6 MiB (5.4%) command: thunderbird pid: 4186 cpu: 0.5%
2: mem: 340.4 MiB (4.4%) command: gnome-shell pid: 2197 cpu: 8.9%
3: mem: 320.2 MiB (4.1%) command: vivaldi-bin pid: 3609 cpu: 1.5%
4: mem: 268.5 MiB (3.4%) command: vivaldi-bin pid: 3728 cpu: 4.9%
5: mem: 239.7 MiB (3.1%) command: vivaldi-bin pid: 3707 cpu: 1.1%
Info:
Processes: 280 Power: uptime: 24m states: freeze,mem,disk suspend: s2idle
avail: deep wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 2.99 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 258 default: graphical
tool: systemctl
Compilers: clang: 21.1.6 gcc: 15.2.1 Shell: Zsh v: 5.9 running-in: kgx
inxi: 3.3.40
/etc/environment
#
# This file is parsed by pam_env module
#
# Syntax: simple "KEY=VAL" pairs on separate lines
#
# Manjaro defaults are now in /etc/profile.d/
QT_QPA_PLATFORMTHEME="qt5ct"
Ich kann in qt5ct eingeben was ich will. Das Design innerhalb des Programms ändert sich sogar, aber es wird nicht übernommen.
~/.profile gibts es bei mir nicht
Diesen hier habe ich mal eingefügt
exec=env QT_QPA_PLATFORMTHEME="qt5ct"
habe davon keine Auswirkung, bzw das was in /etc/environment steht änder sich dabei nicht.
Die Anwendung QGnomePlatform habe ich jetzt nicht installiert. Laut Github wird es auch nicht mehr gepflegt.
Woran könnte es liegen dass das Design sich bei mir mit der Anwendung WordQuiz nicht ändert? Es sind nur einzelner Zellen wo das Design unleserlich ist (Bei KDE Connect nur eine Zelle)?
)