PrusaSlicer force close after last week update

Hello, I have problem with Prusaslicer. Last week I did update system 220+ list. After that, when I use Prusaslicer in some model it’s force close after I press “slice now” button.

I then use Timeshift to go back before that. The last one in the list (the one that cause this problem) is Lysia. I go back before Lysia and problem solved.

How do I know which one in the update list make the problem? So I can update other packages and skip that one.

Run prusa-slicer or prusa-gcodeviewer (whichever is the main binary) from the terminal and reproduce the issue. There should be some error output.

I just have a chance to try update again with 380+ packages and it’s happen again. This is what I got from terminal.

~ >>> prusa-slicer                                                                                                    [127]

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.909: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkToggleButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.910: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-CRITICAL **: 11:38:11.910: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(prusa-slicer:6801): Gtk-CRITICAL **: 11:38:11.912: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.915: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkToggleButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.916: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-CRITICAL **: 11:38:11.916: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.919: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkToggleButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-WARNING **: 11:38:11.920: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:6801): Gtk-CRITICAL **: 11:38:11.921: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
11:38:11 AM: Debug: window wxTreeCtrl(0x55e79e67d2c0, ) lost focus even though it didn't have it
facet (1291)/ first facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2684)/ second facet
  vertex 0/2684 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 1/2684 -1.88284264E+01 -8.00000000E+00  1.31715727E+01
  vertex 2/2684 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
facet (1291)/ first facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2683)/ second facet
  vertex 0/2683 -1.88284264E+01 -8.00000000E+00 -1.31715727E+01
  vertex 1/2683 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 2/2683 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2683)/ first facet
  vertex 0/2683 -1.88284264E+01 -8.00000000E+00 -1.31715727E+01
  vertex 1/2683 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 2/2683 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (1291)/ second facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2684)/ first facet
  vertex 0/2684 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 1/2684 -1.88284264E+01 -8.00000000E+00  1.31715727E+01
  vertex 2/2684 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
facet (1291)/ second facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
zsh: segmentation fault (core dumped)  prusa-slicer

Now, I’m rollback to before update and running command prusa-slicer from terminal again, slicing same model same setting. This time it is not force close and this is from terminal

~  prusa-slicer                                                                                                  
(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.554: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkToggleButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.555: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-CRITICAL **: 12:21:57.555: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(prusa-slicer:3846): Gtk-CRITICAL **: 12:21:57.557: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.561: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkToggleButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.562: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-CRITICAL **: 12:21:57.562: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.569: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkToggleButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content width -13 (allocation 1, extents 7x7) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-WARNING **: 12:21:57.570: Negative content height -5 (allocation 1, extents 3x3) while allocating gadget (node button, owner GtkButton)

(prusa-slicer:3846): Gtk-CRITICAL **: 12:21:57.570: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbar
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
12:21:57 PM: Debug: window wxTreeCtrl(0x559ff32108c0, ) lost focus even though it didn't have it
facet (1291)/ first facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2684)/ second facet
  vertex 0/2684 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 1/2684 -1.88284264E+01 -8.00000000E+00  1.31715727E+01
  vertex 2/2684 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
facet (1291)/ first facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2683)/ second facet
  vertex 0/2683 -1.88284264E+01 -8.00000000E+00 -1.31715727E+01
  vertex 1/2683 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 2/2683 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2683)/ first facet
  vertex 0/2683 -1.88284264E+01 -8.00000000E+00 -1.31715727E+01
  vertex 1/2683 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 2/2683 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (1291)/ second facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01
facet (2684)/ first facet
  vertex 0/2684 -5.65685415E+00 -1.60000000E+01 -7.00000013E-15
  vertex 1/2684 -1.88284264E+01 -8.00000000E+00  1.31715727E+01
  vertex 2/2684 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
facet (1291)/ second facet
  vertex 0/1291 -5.65685415E+00 -1.60000000E+01 -7.10542736E-15
  vertex 1/1291 -1.88284264E+01 -1.60000000E+01  1.31715727E+01
  vertex 2/1291 -1.88284264E+01 -1.60000000E+01 -1.31715727E+01

When pasting terminal output, highlight it and use the Preformatted text </> button, not the Quote " button.

Alternatively, add three backticks ` above and below the text:

```
text
```

I’ve done it for you this time. :wink:

Thank you, I will do that next time.

Could you see anything from the terminal output that cause my issue?

Is this line tell anything?

zsh: segmentation fault (core dumped)  prusa-slicer