Problems resizing windows

Have you seen the video I attached? I don’t have anything incompatible with the system

Yes, I have seen it, and it seems to be a screen tearing issue. That’s all I can say about that. If you provide some system information, someone might be able to help more. The links I gave earlier explain how to find and present that information.

what information do you need ?

You could start with the first command given in the ‘How to Find System Information’ tutorial (linked earlier), and post the output from that.

but WHAT information do you need theres all kind information…

It’s the first command listed, as I said. Look under Global Information.

Here’s a tutorial I missed. It will help you format information in posts:

1 Like

I’m not going to give my sensitive information to you. especially the golbal ones, I’m going to format my computer and see if it comes back, and thanks for the suggestion “if manjaro is for me”, yes it is for me because I like it. THANK YOU

This command filters out personally identifiable information, when using the inxi command:

inxi --admin --verbosity=7 --filter --no-host --width

Nobody suggested formatting your computer.

“Is Manjaro For You” – is often given when a User seems unable or unwilling to help us to help them; sometimes at the risk of offending egos. I like Manjaro too.

Well, I’m unwilling to help any further. Good luck.

If you were perhaps very specific in helping or really wanted to give the right commands I would be grateful, good luck to you too! first starts complaining about my English and then recommends that I stop using manjaro

I did neither. Good luck.

1 Like
inxi -Fazy

Is a common request here on the forums and filters out sensitive information by design.
If you dont want to share the output of things like inxi it will be very difficult to help you.

oh ok i will share then

System:
  Kernel: 6.5.9-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.5-x86_64
    root=UUID=2315f61e-8dab-48d5-a35e-d53b6f42abb5 rw rootflags=subvol=@ quiet
    splash apparmor=1 security=apparmor
    resume=UUID=7d32354d-20a9-4ddc-8379-762883175f15 udev.log_priority=3
  Desktop: GNOME v: 45.0 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 45.0.1
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: BIOSTAR model: H310MHP serial: <superuser required>
    UEFI: American Megatrends v: 5.12 date: 05/31/2019
CPU:
  Info: model: Intel Core i5-9400F bits: 64 type: MCP arch: Coffee Lake
    gen: core 9 level: v3 note: check built: 2018 process: Intel 14nm family: 6
    model-id: 0x9E (158) stepping: 0xA (10) microcode: 0xF4
  Topology: cpus: 1x cores: 6 smt: <unsupported> cache: L1: 384 KiB
    desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB L3: 9 MiB
    desc: 1x9 MiB
  Speed (MHz): avg: 3900 min/max: 800/4100 scaling: driver: intel_pstate
    governor: powersave cores: 1: 3900 2: 3900 3: 3900 4: 3900 5: 3900 6: 3900
    bogomips: 34814
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: disabled, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA TU116 [GeForce GTX 1660] driver: nvidia v: 535.129.03
    alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current (as of
    2023-11; EOL~2026-12-xx) arch: Turing code: TUxxx process: TSMC 12nm FF
    built: 2018-2022 pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.0
    chip-ID: 10de:2184 class-ID: 0300
  Device-2: Logitech C922 Pro Stream Webcam driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:5
    chip-ID: 046d:085c class-ID: 0102 serial: <filter>
  Display: x11 server: X.org v: 1.21.1.9 with: Xwayland v: 23.2.2
    compositor: gnome-shell driver: X: loaded: nvidia gpu: nvidia display-ID: :1
    screens: 1
  Screen-1: 0 s-res: 3840x1080 s-size: <missing: xdpyinfo>
  Monitor-1: DP-0 pos: primary,left res: 1920x1080 dpi: 82
    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
  Monitor-2: HDMI-0 pos: right res: 1920x1080 dpi: 102
    size: 477x268mm (18.78x10.55") diag: 547mm (21.54") modes: N/A
  API: EGL Message: No EGL data available.
  API: OpenGL v: 4.6.0 vendor: nvidia v: 535.129.03 glx-v: 1.4
    direct-render: yes renderer: NVIDIA GeForce GTX 1660/PCIe/SSE2
    memory: 5.86 GiB
Audio:
  Device-1: Intel 200 Series PCH HD Audio vendor: Biostar Microtech Intl Corp
    driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3
    chip-ID: 8086:a2f0 class-ID: 0403
  Device-2: NVIDIA TU116 High Definition Audio driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1
    chip-ID: 10de:1aeb class-ID: 0403
  Device-3: Logitech [] driver: hid-generic,snd-usb-audio,usbhid type: USB
    rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6:3 chip-ID: 046d:0acb
    class-ID: 0300 serial: <filter>
  Device-4: Logitech C922 Pro Stream Webcam driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:5
    chip-ID: 046d:085c class-ID: 0102 serial: <filter>
  Device-5: [] driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-9:6 chip-ID: 3142:5060
    class-ID: 0300
  API: ALSA v: k6.5.9-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: JACK v: 1.9.22 status: off tools: N/A
  Server-3: PipeWire v: 0.3.83 status: off tools: pw-cli
  Server-4: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
    type: plugin tools: pacat,pactl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Biostar Microtech Intl Corp driver: r8169 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
    v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-2:2
    chip-ID: 0a12:0001 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Drives:
  Local Storage: total: 990.11 GiB used: 256.68 GiB (25.9%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000VM002-1ET162
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5900 serial: <filter> fw-rev: SC12 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 model: N/A size: 58.59 GiB block-size:
    physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 5 Gb/s lanes: 1
    mode: 3.2 gen-1x1 tech: N/A serial: <filter> fw-rev: 2.00 scheme: MBR
Partition:
  ID-1: / raw-size: 914.07 GiB size: 914.07 GiB (100.00%)
    used: 230.84 GiB (25.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 584 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 914.07 GiB size: 914.07 GiB (100.00%)
    used: 230.84 GiB (25.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 914.07 GiB size: 914.07 GiB (100.00%)
    used: 230.84 GiB (25.3%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
    compressor: zstd max-pool: 20%
  ID-1: swap-1 type: partition size: 17.14 GiB used: 1 MiB (0.0%)
    priority: -2 dev: /dev/sda3 maj-min: 8:3
Sensors:
  System Temperatures: cpu: 92.0 C mobo: N/A gpu: nvidia temp: 57 C
  Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Info:
  Processes: 314 Uptime: 1h 4m wakeups: 0 Memory: total: 16 GiB
  available: 15.58 GiB used: 8.57 GiB (55.0%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: 1275 pm: pacman pkgs: 1236 libs: 338 tools: gnome-software,pamac
  pm: flatpak pkgs: 28 pm: snap pkgs: 11 Shell: Zsh v: 5.9
  running-in: gnome-terminal inxi: 3.3.31

Looks like the BIOS is out of date, but if my quick search was correct the updates are pretty inconsequential. (one is just for a new logo and the other is “Added XMP profile info in main setup page”)

Is this nvidia otherwise working as expected?
Maybe we can also look at mhwd:

mhwd -l -li

Maybe its the video card ? my bios… i dont know how to update and i never had problems with that

> Installed PCI configs:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
          video-nvidia            2023.03.23               false            PCI


Warning: No installed USB configs!
> 0000:02:00.0 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd.:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
         network-r8168            2023.09.12                true            PCI


> 0000:01:00.0 (0300:10de:2184) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
                  NAME               VERSION          FREEDRIVER           TYPE
--------------------------------------------------------------------------------
          video-nvidia            2023.03.23               false            PCI
    video-nvidia-470xx            2023.03.23               false            PCI
           video-linux            2018.05.04                true            PCI
     video-modesetting            2020.01.13                true            PCI
            video-vesa            2017.03.12                true            PCI

Are all of the program windows that are slow to resize Flatpak or SNAP by chance?

All packages

This is high, still within specification for your hardware?

Your system runs on a HDD, this is always limiting the overall performance.

Here we have a high memory usage, is the system swapping already, from time to time? Another potential performance killer.

i think im gonna buy a ssd, maybe solve that problem and yeah the temperature is always high idk why, and my memory its not cosuming all 16GBs my problem is the lagging while resize my window

Maybe some dust which could be removed from your fan?

There seems to be an ongoing issue with gnome-shell-extensions which might be something to do with your problem. I’m not a GNOME user but some of the links from the bug report suggest that downgrading that package fixes things.

https://bbs.archlinux.org/viewtopic.php?id=290044