Hallo!
Bei einem meiner Laptops habe ich das Problem, das ich den Anmeldebildschirm nicht mit der Maus bedienen kann.
Wenn ich die MAus verwenden möchte reagiert der Rechner nicht, nach dem Anmelden funkioniert die Maus einwandfrei.
Doch am Anmeldeschirm muß ich die Tasten am Touchpa benutzen um eine Auswahl zu treffen bzw. zu bestätigen.
Wie bekomme ich es hin das die Maus wieder funktioniert?
Mein System :
inxi -Fxxxzo
System:
Kernel: 6.1.60-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36
info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: ASUSTeK product: F70SL v: 1.0
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: ASUS model: F70SL v: 1.0 serial: <superuser required>
BIOS: American Megatrends v: 211 date: 02/18/2009
Battery:
ID-1: BAT0 charge: 44.7 Wh (96.8%) condition: 46.2/983.0 Wh (4.7%)
volts: 16.2 min: 14.8 model: ASUSTEK M70--22 type: Li-ion serial: N/A
status: not charging
CPU:
Info: single core model: Intel Pentium Dual T3400 bits: 64 arch: Core2 Merom
rev: D cache: L1: 64 KiB L2: 1024 KiB
Speed (MHz): 1000 min/max: 1000/2167 core: 1: 1000 bogomips: 4336
Flags: ht lm nx pae sse sse2 sse3 ssse3
Graphics:
Device-1: NVIDIA G98M [GeForce 9300M GS] vendor: ASUSTeK U6V laptop
driver: nouveau v: kernel arch: Tesla pcie: speed: 2.5 GT/s lanes: 16 ports:
active: LVDS-1 empty: HDMI-A-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:06e9
class-ID: 0300 temp: 48.0 C
Device-2: Suyin UVC 1.3MPixel WebCam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 bus-ID: 1-5:3 chip-ID: 064e:a116 class-ID: 0e02
serial: <filter>
Display: x11 server: X.Org v: 21.1.9 compositor: xfwm v: 4.18.0 driver: X:
loaded: nouveau unloaded: modesetting alternate: fbdev,nv,vesa dri: nouveau
gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37")
s-diag: 485mm (19.11")
Monitor-1: LVDS-1 model: LG Display 0x01dd res: 1600x900 hz: 60 dpi: 106
size: 382x215mm (15.04x8.46") diag: 438mm (17.3") modes: max: 1600x900
min: 640x350
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
Device-1: Silicon Integrated Systems [SiS] Azalia Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:0f.0 chip-ID: 1039:7502
class-ID: 0403
API: ALSA v: k6.1.60-1-MANJARO status: kernel-api with: aoss
type: oss-emulator
Server-1: JACK v: 1.9.22 status: off
Server-2: PipeWire v: 0.3.83 status: off with: pipewire-media-session
status: off
Server-3: PulseAudio v: 16.1 status: active with: 1: pulseaudio-alsa
type: plugin 2: pulseaudio-jack type: module
Network:
Device-1: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter
vendor: ASUSTeK driver: sis190 v: 1.4 port: cc00 bus-ID: 00:04.0
chip-ID: 1039:0191 class-ID: 0200
IF: enp0s4 state: down mac: <filter>
Device-2: Qualcomm Atheros AR928X Wireless Network Adapter
vendor: AzureWave AW-NE771 802.11bgn driver: ath9k v: kernel pcie:
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 168c:002a class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 26.1 GiB (5.6%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
speed: <unknown> tech: SSD serial: <filter> fw-rev: 2B6Q scheme: MBR
Partition:
ID-1: / size: 95.56 GiB used: 19.58 GiB (20.5%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 354.91 GiB used: 6.52 GiB (1.8%) fs: ext4 dev: /dev/sda2
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sda1 size: 6.45 GiB fs: swap
Sensors:
System Temperatures: cpu: 49.0 C mobo: N/A gpu: nouveau temp: 48.0 C
Fan Speeds (rpm): N/A
Info:
Processes: 167 Uptime: 1h 52m wakeups: 0 Memory: total: 3 GiB
available: 2.91 GiB used: 1.49 GiB (51.3%) Init: systemd v: 254
default: graphical Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: pm: pacman
pkgs: 1691 Shell: Bash v: 5.2.15 running-in: xfce4-terminal inxi: 3.3.31
Vielen Dank im voraus.
MfG R.Lehmeier
