Problem with wifi driver

Support Network
,
1

hi i recently bought a wifi dongle MediaTek | MT7601U
it works well on windows 10
but in linux i have a problem

lsusb

Bus 001 Device 005: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter

ip link

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether 40:61:86:97:bd:a0 brd ff:ff:ff:ff:ff:ff
3: enp0s29f7u6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 1000
link/ether ce:57:18:08:fd:9b brd ff:ff:ff:ff:ff:ff

third one is my phone (:slight_smile:

uname -a

Linux amir-ms7392 5.4.72-1-MANJARO #1 SMP PREEMPT Sat Oct 17 11:06:19 UTC 2020 x86_64 GNU/Linux

i have CD with dongle but i think it’s for kernel 2.6

2

Could you post ther output of inxi -Fxz --no-host as well, please?

3

System: Kernel: 5.4.72-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0 Desktop: KDE Plasma 5.19.5 Distro: Manjaro Linux
Machine: Type: Desktop Mobo: MICRO-STAR model: P31 Neo-F V2(MS-7392) v: 1.0 serial: BIOS: American Megatrends
v: 2.2 date: 05/26/2009
CPU: Topology: Dual Core model: Intel Core2 Duo E7500 bits: 64 type: MCP arch: Penryn rev: A L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11678
Speed: 2112 MHz min/max: 1603/2936 MHz Core speeds (MHz): 1: 2112 2: 2419
Graphics: Device-1: NVIDIA G96C [GeForce 9500 GT] driver: nvidia v: 340.108 bus ID: 01:00.0
Display: x11 server: X.Org 1.20.9 driver: nvidia resolution: 1600x900~60Hz
OpenGL: renderer: GeForce 9500 GT/PCIe/SSE2 v: 3.3.0 NVIDIA 340.108 direct render: Yes
Audio: Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel
bus ID: 00:1b.0
Sound Server: ALSA v: k5.4.72-1-MANJARO
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8169 v: kernel
Device-2: Ralink MT7601U Wireless Adapter type: USB driver: usb-network bus ID: 1-6:20
IF-ID-1: enp0s29f7u5 state: unknown speed: N/A duplex: N/A mac:
port: d800 bus ID: 04:00.0
IF: enp4s0 state: down mac:
IF-ID-1: enp0s29f7u5 state: unknown speed: N/A duplex: N/A mac:
Drives: Local Storage: total: 1.36 TiB used: 499.64 GiB (35.8%)
ID-1: /dev/sda vendor: Seagate model: ST3500418AS size: 465.76 GiB
ID-2: /dev/sdb type: USB vendor: Seagate model: ST1000LM035-1RK172 size: 931.51 GiB
Partition: ID-1: / size: 44.59 GiB used: 27.37 GiB (61.4%) fs: ext4 dev: /dev/sda10
Swap: ID-1: swap-1 type: partition size: 4.52 GiB used: 376.2 MiB (8.1%) dev: /dev/sda9
Sensors: System Temperatures: cpu: 49.0 C mobo: N/A gpu: nvidia temp: 45 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 50%
Info: Processes: 192 Uptime: 2h 20m Memory: 3.85 GiB used: 2.86 GiB (74.3%) Init: systemd Compilers: gcc: 10.2.0
Packages: 1336 Shell: fish v: 3.1.2 inxi: 3.1.05

edited

4

Looks like there is no driver loaded for the wifi controller.
There is an (outdated) AUR firmware package available that might help, but that’s just me guessing.
Better wait for someone more knowledgeable for competent help.

5

See this

6

These look like totally different chips though?

7

They both can use the MT7601U driver. The OP is tying to run the binary one they downloaded
Some people use this firmware AUR (en) - mt7601u-firmware but is out of date
Others use this AUR (en) - mt7601u-ap-dkms
On the other hand can be done like this [Solved] MT7601U USB Wireless Adapter doesn't work / Newbie Corner / Arch Linux Forums
Are both Ralink and from the information from OP i can’t be sure they do not connected it to a USB3 port, hence not recognized properly …

8

Gawd, that’s complicated. :slight_smile:
Thanks!

9

I used this the third link you sent but not working

۲۰۲۰۱۱۰۱_۲۲۰۸۱۰
۲۰۲۰۱۱۰۱_۲۲۰۸۱۰1416×796 522 KB

Sorry for sending picture
I get these when dongle is plugged
What can i do ?:frowning::sob:

Edit
I had another compiled driver but it was same

10

Any one can help me ?
I tried use driver in live ubuntu but it is still like that :point_up_2::point_up_2:

11

sudo dmesg

[ 8039.128751] usb 1-5: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 8039.128756] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8039.128758] usb 1-5: Product: 802.11 n WLAN
[ 8039.128761] usb 1-5: Manufacturer: MediaTek
[ 8039.128763] usb 1-5: SerialNumber: 1.0
[ 8039.257609] usb 1-5: reset high-speed USB device number 19 using ehci-pci
[ 8039.407120] mt7601u 1-5:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 8039.409190] mt7601u 1-5:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 8039.785247] mt7601u 1-5:1.0: EEPROM ver:0d fae:00
[ 8039.955498] mt7601u 1-5:1.0: rx urb failed: -71
[ 8039.956308] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8039.956313] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8039.959742] mt7601u 1-5:1.0: rx urb failed: -71
[ 8039.960248] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8039.960253] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8039.963989] mt7601u 1-5:1.0: rx urb failed: -71
[ 8039.964499] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8039.964504] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8039.968239] mt7601u 1-5:1.0: rx urb failed: -71
[ 8039.968745] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8039.968749] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8039.972488] mt7601u 1-5:1.0: rx urb failed: -71
[ 8039.972994] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8039.972998] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8039.973001] mt7601u 1-5:1.0: Error: mt7601u_mcu_wait_resp timed out
[ 8040.154315] audit: type=1101 audit(1604397305.370:210): pid=28398 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:accounting g
rantors=pam_permit,pam_time acct="amir" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8040.155729] audit: type=1110 audit(1604397305.373:211): pid=28398 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantor
s=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8040.155735] audit: type=1105 audit(1604397305.373:212): pid=28398 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_open gr
antors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8040.167614] mt7601u 1-5:1.0: Vendor request req:07 off:0080 failed:-71
[ 8040.184024] audit: type=1106 audit(1604397305.400:213): pid=28398 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_close g
rantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8040.184243] audit: type=1104 audit(1604397305.400:214): pid=28398 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantor
s=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8040.334281] mt7601u 1-5:1.0: Vendor request req:02 off:0080 failed:-71
[ 8040.500964] mt7601u 1-5:1.0: Vendor request req:02 off:0080 failed:-71
[ 8040.501030] mt7601u: probe of 1-5:1.0 failed with error -110
[ 8040.501337] usb 1-5: USB disconnect, device number 19
[ 8040.757618] usb 1-5: new high-speed USB device number 20 using ehci-pci
[ 8040.919000] usb 1-5: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 8040.919004] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8040.919006] usb 1-5: Product: 802.11 n WLAN
[ 8040.919008] usb 1-5: Manufacturer: MediaTek
[ 8040.919010] usb 1-5: SerialNumber: 1.0
[ 8041.047623] usb 1-5: reset high-speed USB device number 20 using ehci-pci
[ 8041.197252] mt7601u 1-5:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 8041.199714] mt7601u 1-5:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 8041.579998] mt7601u 1-5:1.0: EEPROM ver:0d fae:00
[ 8041.749760] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8041.749767] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8041.754247] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8041.754252] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8041.758498] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8041.758503] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8041.762746] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8041.762751] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8041.766997] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8041.767002] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8041.767006] mt7601u 1-5:1.0: Error: mt7601u_mcu_wait_resp timed out
[ 8041.964321] mt7601u 1-5:1.0: Vendor request req:07 off:0080 failed:-71
[ 8042.130960] mt7601u 1-5:1.0: Vendor request req:02 off:0080 failed:-71
[ 8042.297625] mt7601u 1-5:1.0: Vendor request req:02 off:0080 failed:-71
[ 8042.297676] mt7601u: probe of 1-5:1.0 failed with error -110
[ 8042.300824] usb 1-5: USB disconnect, device number 20
[ 8042.557631] usb 1-5: new high-speed USB device number 21 using ehci-pci
[ 8042.715374] usb 1-5: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 8042.715379] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8042.715382] usb 1-5: Product: 802.11 n WLAN
[ 8042.715384] usb 1-5: Manufacturer: MediaTek
[ 8042.715386] usb 1-5: SerialNumber: 1.0
[ 8042.844316] usb 1-5: reset high-speed USB device number 21 using ehci-pci
[ 8042.993872] mt7601u 1-5:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 8042.995322] mt7601u 1-5:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 8043.384251] mt7601u 1-5:1.0: EEPROM ver:0d fae:00
[ 8043.556244] mt7601u_complete_rx: 5 callbacks suppressed
[ 8043.556260] mt7601u 1-5:1.0: rx urb failed: -71
[ 8043.556282] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8043.556286] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8043.560489] mt7601u 1-5:1.0: rx urb failed: -71
[ 8043.560745] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8043.560749] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8043.564739] mt7601u 1-5:1.0: rx urb failed: -71
[ 8043.564995] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8043.564999] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8043.568990] mt7601u 1-5:1.0: rx urb failed: -71
[ 8043.569242] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8043.569245] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8043.573245] mt7601u 1-5:1.0: rx urb failed: -71
[ 8043.573502] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8043.573505] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8043.573508] mt7601u 1-5:1.0: Error: mt7601u_mcu_wait_resp timed out
[ 8043.770990] mt7601u 1-5:1.0: Vendor request req:07 off:0080 failed:-71
[ 8043.937665] mt7601u 1-5:1.0: Vendor request req:02 off:0080 failed:-71
[ 8044.104312] mt7601u 1-5:1.0: Vendor request req:02 off:0080 failed:-71
[ 8044.104367] mt7601u: probe of 1-5:1.0 failed with error -110
[ 8044.104641] usb 1-5: USB disconnect, device number 21
[ 8044.360991] usb 1-5: new high-speed USB device number 22 using ehci-pci
[ 8044.518877] usb 1-5: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 8044.518881] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8044.518884] usb 1-5: Product: 802.11 n WLAN
[ 8044.518886] usb 1-5: Manufacturer: MediaTek
[ 8044.518888] usb 1-5: SerialNumber: 1.0
[ 8044.647673] usb 1-5: reset high-speed USB device number 22 using ehci-pci
[ 8044.797247] mt7601u 1-5:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 8044.799325] mt7601u 1-5:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 8045.171998] mt7601u 1-5:1.0: EEPROM ver:0d fae:00
[ 8045.341618] mt7601u 1-5:1.0: rx urb failed: -71
[ 8045.342169] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8045.342175] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8045.345867] mt7601u 1-5:1.0: rx urb failed: -71
[ 8045.346302] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8045.346306] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8045.350117] mt7601u 1-5:1.0: rx urb failed: -71
[ 8045.350373] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8045.350378] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8045.354366] mt7601u 1-5:1.0: rx urb failed: -71
[ 8045.354621] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8045.354625] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8045.358615] mt7601u 1-5:1.0: rx urb failed: -71
[ 8045.358871] mt7601u 1-5:1.0: Error: MCU resp urb failed:-71
[ 8045.358874] mt7601u 1-5:1.0: Error: MCU resp evt:0 seq:5-4!
[ 8045.358878] mt7601u 1-5:1.0: Error: mt7601u_mcu_wait_resp timed out
[ 8045.545161] kauditd_printk_skb: 5 callbacks suppressed
[ 8045.545163] audit: type=1101 audit(1604397310.763:220): pid=28463 uid=1000 auid=1000 ses=2 subj==unconfined msg='op=PAM:accounting g
rantors=pam_permit,pam_time acct="amir" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8045.545538] audit: type=1110 audit(1604397310.763:221): pid=28463 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:setcred grantor
s=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8045.545922] audit: type=1105 audit(1604397310.763:222): pid=28463 uid=0 auid=1000 ses=2 subj==unconfined msg='op=PAM:session_open gr
antors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/1 res=success'
[ 8045.554329] mt7601u 1-5:1.0: Vendor request req:07 off:0080 failed:-71

:sob: :sob: :sob: :sob: :sob: :sob: :sob: :sob:

12

This might be due to a hardware problem of the USB to parallel port converter or the cable itself inside your case. That will happen indefinitely till you solve it. Also can be due to the way is set in BIOS. Maybe make it to be just USB1.1 instead of USB2 from BIOS settings … Have you tried other ports ?

Also, have you thought of updating the BIOS ?


You have the 2.2 version and there is 2.3 version.
13

when i disable driver it’s not happening

so idont think it’s about BIOS :woman_shrugging::woman_shrugging::woman_shrugging:

and it’s work well on windows 10 in this system

It also happens in other disto

14

any other idea ? :sob: :sob: :tired_face:

15

i download driver from mediatek site

But it for old kernels

17

There is a problem with device, not configuration.

18

well device works great in windows :face_with_head_bandage: :sleepy:

19