Hey y’all,
I’m a bit of a noob here. I just recently got an HP laptop (see information specs below) and installed Linux Manjaro 5.10 LTS. When plugging in an HDMI from my laptop to my TV the TV picks up a signal but the screen is black, and also my laptop’s screen is black. When unplugging the laptop from the HDMI the TV goes back to searching for a signal but the laptop screen remains black, and there seems to be no way to interact with it anymore. Any suggestions? Is this a driver issue?
System:
Kernel: 5.10.84-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=db36faa8-7c9d-4c96-95d4-255ae3af6ebb rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME 41.2 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 41.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: HP Laptop 15-dy0xxx v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 8651 v: 58.16 serial: <superuser required> UEFI: AMI
v: F.19 date: 05/20/2021
Battery:
ID-1: BAT0 charge: 32.1 Wh (75.2%) condition: 42.7/42.7 Wh (100.0%)
volts: 11.9 min: 11.4 model: HP Primary type: Li-ion serial: N/A
status: Discharging
Memory:
RAM: total: 7.59 GiB used: 3.18 GiB (42.0%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Pentium Silver N5030 bits: 64 type: MCP
arch: Goldmont Plus family: 6 model-id: 0x7A (122) stepping: 8
microcode: 0x1A
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 224 KiB
desc: d-4x24 KiB; i-4x32 KiB L2: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1677 high: 2010 min/max: 800/3100 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1376 2: 1959 3: 1366
4: 2010 bogomips: 8756
Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_capabilities
arch_perfmon art bts cat_l2 cdp_l2 clflush clflushopt cmov constant_tsc
cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts erms est fpu
fsgsbase fxsr ht ibpb ibrs ibrs_enhanced ida intel_pt lahf_lm lm mca mce
md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe
pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdpid rdrand
rdseed rdt_a rdtscp rep_good sdbg sep sha_ni smap smep ss ssbd sse sse2
sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tsc tsc_adjust
tsc_deadline_timer tsc_known_freq umip vme x2apic xgetbv1 xsave xsavec
xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel GeminiLake [UHD Graphics 605] vendor: Hewlett-Packard
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:3184 class-ID: 0300
Device-2: Luxvisions Innotech Limited HP TrueVision HD Camera type: USB
driver: uvcvideo bus-ID: 1-6:4 chip-ID: 30c9:0035 class-ID: fe01
serial: <filter>
Display: wayland server: X.org 1.21.1.2 compositor: gnome-shell driver:
loaded: i915 note: n/a (using device driver) - try sudo/root display-ID: 0
resolution: <missing: xdpyinfo>
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
alternate: snd_soc_skl,snd_sof_pci bus-ID: 00:0e.0 chip-ID: 8086:3198
class-ID: 0403
Sound Server-1: ALSA v: k5.10.84-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.40 running: yes
Network:
Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8822ce v: N/A modules: rtw88_8822ce
port: e000 bus-ID: 02:00.0 chip-ID: 10ec:c822 class-ID: 0280
IF: wlo1 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
bus-ID: 1-5:3 chip-ID: 0bda:b00c class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 238.47 GiB used: 33.8 GiB (14.2%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron
model: MTFDHBA256TCK-1AS1AABHA size: 238.47 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: HPS0V23 temp: 38.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 238.17 GiB size: 233.38 GiB (97.99%)
used: 33.8 GiB (14.5%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
label: N/A uuid: db36faa8-7c9d-4c96-95d4-255ae3af6ebb
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: NO_LABEL uuid: 835A-5CB3
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 9 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: Primax HP Optical Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
power: 98mA chip-ID: 0461:4d0f class-ID: 0301
Device-2: 1-5:3 info: Realtek Bluetooth Radio type: Bluetooth
driver: btusb interfaces: 2 rev: 1.0 speed: 12 Mb/s power: 500mA
chip-ID: 0bda:b00c class-ID: e001 serial: <filter>
Device-3: 1-6:4 info: Luxvisions Innotech Limited HP TrueVision HD Camera
type: Video driver: uvcvideo interfaces: 3 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 30c9:0035 class-ID: fe01 serial: <filter>
Hub-2: 2-0:1 info: Super-speed hub ports: 7 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 222 Uptime: 28m wakeups: 1 Init: systemd v: 249 tool: systemctl
Compilers: gcc: 11.1.0 Packages: 1490 pacman: 1487 lib: 465 flatpak: 0
snap: 3 Shell: Zsh v: 5.8 running-in: gnome-terminal inxi: 3.3.11
Screen 0: minimum 16 x 16, current 1366 x 768, maximum 32767 x 32767
XWAYLAND0 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
1366x768 59.80*+
1024x768 59.92
800x600 59.86
640x480 59.38
320x240 59.52
720x480 59.71
640x400 59.95
320x200 58.96
1280x720 59.86
1024x576 59.90
864x486 59.92
720x400 59.55
640x350 59.77