Hi there!
I’ve been having a problem with my dual monitor setup on startup for the longest time, and I can’t figure out the problem.
Behaviour:
- when I press the power button on my pc, there’s obviously a signal
- when it gets to the lock screen is where it’s really weird. The monitor clearly has a signal but the screen is all black. My 2nd monitor is working normally and is on the lock screen. However when I type my password, it’s “going to” my main screen (despite being all black)
- after I enter my password, my 2nd monitor boots up normally. But my primary loses signal
- my 2nd monitor enters normal operation, and my main monitor flashes black a few times and also comes into normal operations about 5-10 seconds after my 2nd
If anyone could help me, or point me in a direction to fix the problem, that would be amazing.
System:
Kernel: 5.15.16-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=d6f8c1d4-003e-43ff-8b50-7126bcf3d505 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: LENOVO product: 90NC00JAUS v: Legion T5 28IMB05
serial: <superuser required> Chassis: type: 3 serial: <superuser required>
Mobo: LENOVO model: 3717 v: SDK0J40700 WIN 3258192292810
serial: <superuser required> UEFI: LENOVO v: O4NKT16A date: 09/03/2020
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 23.22 GiB used: 5.09 GiB (21.9%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i5-10400 bits: 64 type: MT MCP arch: Comet Lake
family: 6 model-id: 0xA5 (165) stepping: 3 microcode: 0xEA
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 2450 high: 3297 min/max: 800/4300 scaling:
driver: intel_pstate governor: powersave cores: 1: 2793 2: 2698 3: 3049
4: 2000 5: 2763 6: 3297 7: 2094 8: 2027 9: 2630 10: 2140 11: 1865 12: 2045
bogomips: 69629
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush clflushopt
cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fxsr
ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ibrs_enhanced ida
intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor
movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pln pni popcnt pse pse36 pts rdrand rdseed rdtscp
rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi
vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA TU116 [GeForce GTX 1660 SUPER] vendor: Micro-Star MSI
driver: nvidia v: 495.46 alternate: nouveau,nvidia_drm bus-ID: 01:00.0
chip-ID: 10de:21c4 class-ID: 0300
Device-2: Sunplus IT Co Full HD webcam type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-8:4 chip-ID: a187:28b3
class-ID: 0102 serial: <filter>
Display: x11 server: X.org 1.21.1.3 compositor: kwin_x11 driver:
loaded: nvidia resolution: <missing: xdpyinfo>
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: Intel Comet Lake PCH-V cAVS vendor: Lenovo driver: snd_hda_intel
v: kernel alternate: snd_sof_pci_intel_cnl bus-ID: 00:1f.3
chip-ID: 8086:a3f0 class-ID: 0403
Device-2: NVIDIA TU116 High Definition Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 01:00.1 chip-ID: 10de:1aeb
class-ID: 0403
Device-3: Sunplus IT Co Full HD webcam type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-8:4 chip-ID: a187:28b3
class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.15.16-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 02:00.0
chip-ID: 8086:2723 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel port: 3000 bus-ID: 03:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-9:5
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.83 TiB used: 37.2 GiB (2.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WD BLACK SN750 SE 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 711130WD temp: 32.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10EZEX-08WN4A0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
rev: 1A02 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: SMI (STMicroelectronics)
model: USB size: 7.44 GiB block-size: physical: 512 B logical: 512 B
type: N/A serial: <filter> rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 350 GiB size: 343.43 GiB (98.12%) used: 37.18 GiB (10.8%)
fs: ext4 dev: /dev/nvme0n1p5 maj-min: 259:5 label: N/A
uuid: d6f8c1d4-003e-43ff-8b50-7126bcf3d505
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
used: 29 MiB (11.3%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: SYSTEM uuid: 1491-B94B
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 580.26 GiB fs: ntfs
label: Windows uuid: EE1094771094490B
ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 1000 MiB fs: ntfs
label: WinRE_DRV uuid: 26DC94C5DC9490A3
ID-4: /dev/sda1 maj-min: 8:1 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-5: /dev/sda2 maj-min: 8:2 size: 931.39 GiB fs: ntfs label: Data
uuid: FA3C976D3C972423
ID-6: /dev/sdb1 maj-min: 8:17 size: 7.41 GiB fs: vfat label: N/A
uuid: 4C8A-F0BA
ID-7: /dev/sdb2 maj-min: 8:18 size: 32 MiB fs: vfat label: VTOYEFI
uuid: 2BE6-1E5C
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: Razer USA Razer BlackWidow V3
type: Keyboard,Mouse,HID driver: hid-generic,usbhid interfaces: 5 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 1532:024e class-ID: 0300
Device-2: 1-4:3 info: Corsair Gaming GLAIVE RGB Mouse type: Mouse,HID
driver: corsair,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 300mA
chip-ID: 1b1c:1b34 class-ID: 0300 serial: <filter>
Device-3: 1-8:4 info: Sunplus IT Co Full HD webcam type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: a187:28b3 class-ID: 0102 serial: <filter>
Device-4: 1-9:5 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Device-5: 1-11:6 info: Lenovo ITE Device(8297) type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 17ef:c955 class-ID: 0301
Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Device-1: 2-6:2
info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive
type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1
speed: 5 Gb/s power: 504mA chip-ID: 090c:1000 class-ID: 0806
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 27.8 C mobo: N/A gpu: nvidia temp: 44 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 27%
Info:
Processes: 407 Uptime: 28m wakeups: 0 Init: systemd v: 250 tool: systemctl
Compilers: gcc: 11.1.0 clang: 13.0.0 Packages: 1337 pacman: 1321 lib: 358
flatpak: 6 snap: 10 Shell: Zsh v: 5.8 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.12