Pamac tab titles are not rendered properly

Hi,
I’m having this weird problem where the pamac tab titles are not being rendered completely. The words (“Browse”, “Installed”, “Updates”) do not show completely.
I’m attaching the screenshot below.
pamac_problem
My system information below:

$ inxi --admin --verbosity=7 --filter --no-host --width 
System:
  Kernel: 5.10.93-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
    root=UUID=06d7363a-23c3-4c3d-97e3-3bc65484e084 ro quiet apparmor=1
    security=apparmor udev.log_priority=3
  Console: pty pts/2 wm: kwin_x11 DM: SDDM Distro: Manjaro Linux
    base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: VivoBook_ASUSLaptop X513IA_KM513IA
    v: 1.0 serial: <filter>
  Mobo: ASUSTeK model: X513IA v: 1.0 serial: <filter>
    UEFI: American Megatrends v: X513IA.300 date: 06/05/2020
Battery:
  ID-1: BAT0 charge: 9.9 Wh (29.4%) condition: 33.7/42.1 Wh (80.2%)
    volts: 11.8 min: 11.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A
    status: Discharging cycles: 496
Memory:
  RAM: total: 7.26 GiB used: 5.17 GiB (71.3%)
  Array-1: capacity: 32 GiB slots: 2 EC: None max-module-size: 16 GiB
    note: est.
  Device-1: DIMM 0 size: 4 GiB speed: 3200 MT/s type: DDR4
    detail: synchronous unbuffered (unregistered) bus-width: 64 bits
    total: 64 bits manufacturer: Hynix part-no: HMA851S6CJR6N-XN serial: N/A
  Device-2: DIMM 0 size: 4 GiB speed: 3200 MT/s type: DDR4
    detail: synchronous unbuffered (unregistered) bus-width: 64 bits
    total: 64 bits manufacturer: Samsung part-no: M471A5244CB0-CWE
    serial: <filter>
CPU:
  Info: model: AMD Ryzen 7 4700U with Radeon Graphics socket: FP6 bits: 64
    type: MCP arch: Zen 2 family: 0x17 (23) model-id: 0x60 (96) stepping: 1
    microcode: 0x8600103
  Topology: cpus: 1x cores: 8 smt: <unsupported> cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 8 MiB
    desc: 2x4 MiB
  Speed (MHz): avg: 1400 min/max: 1400/2000 boost: enabled
    base/boost: 2000/4200 scaling: driver: acpi-cpufreq governor: schedutil
    volts: 1.2 V ext-clock: 100 MHz cores: 1: 1400 2: 1400 3: 1400 4: 1400
    5: 1400 6: 1400 7: 1400 8: 1400 bogomips: 31952
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs
    irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
    msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
    pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
    pfthreshold pge pni popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a
    rdtscp rep_good sep sha_ni skinit smap smca smep ssbd sse sse2 sse4_1
    sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext tsc
    tsc_scale umip v_vmsave_vmload vgif vmcb_clean vme vmmcall wbnoinvd wdt
    xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
    IBRS_FW, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Renoir vendor: ASUSTeK driver: amdgpu v: kernel
    bus-ID: 03:00.0 chip-ID: 1002:1636 class-ID: 0300
  Device-2: IMC Networks USB2.0 HD UVC WebCam type: USB driver: uvcvideo
    bus-ID: 3-3:3 chip-ID: 13d3:56a8 class-ID: 0e02 serial: <filter>
  Display: server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
    loaded: amdgpu,ati unloaded: modesetting alternate: fbdev,vesa
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
    s-diag: 582mm (22.9")
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
    v: kernel bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403
  Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel
    v: kernel bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound Server-1: ALSA v: k5.10.93-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 01:00.0
    chip-ID: 8086:2723 class-ID: 0280
  IF: wlp1s0 state: down mac: <filter>
  Device-2: ASIX AX88179 Gigabit Ethernet type: USB driver: ax88179_178a
    bus-ID: 2-2:3 chip-ID: 0b95:1790 class-ID: ff00 serial: <filter>
  IF: enp3s0f3u2 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-2:2
    chip-ID: 8087:0029 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 1.14 TiB used: 81.77 GiB (7.0%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix
    model: HFM256GDJTNG-8310A size: 238.47 GiB block-size: physical: 512 B
    logical: 512 B speed: 15.8 Gb/s lanes: 2 type: SSD serial: <filter>
    rev: 80001C00 temp: 35.9 C scheme: GPT
  SMART: yes health: PASSED on: 24d 14h cycles: 5,159
    read-units: 51,603,854 [26.4 TB] written-units: 8,990,447 [4.60 TB]
  ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD10SPZX-80Z10T2 family: Blue Mobile (SMR) size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s
    type: HDD rpm: 5400 serial: <filter> rev: 1A04 temp: 32 C scheme: GPT
  SMART: yes state: enabled health: PASSED on: 160d 4h cycles: 5157 Old-Age:
    g-sense error rate: 402
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 52.2 GiB size: 51.13 GiB (97.95%) used: 23.63 GiB (46.2%)
    fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p5 maj-min: 259:5 label: N/A
    uuid: 06d7363a-23c3-4c3d-97e3-3bc65484e084
  ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
    used: 66.8 MiB (26.1%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
    maj-min: 259:1 label: SYSTEM uuid: DA44-C033
  ID-3: /home raw-size: 34.8 GiB size: 34 GiB (97.71%)
    used: 27.13 GiB (79.8%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p6
    maj-min: 259:6 label: N/A uuid: 941c21f5-3c1e-45ab-8989-ce9c68b0c218
  ID-4: /run/timeshift/backup raw-size: 30 GiB size: 29.36 GiB (97.86%)
    used: 29.34 GiB (99.9%) fs: ext4 block-size: 4096 B dev: /dev/sda2
    maj-min: 8:2 label: Manjaro-recovery
    uuid: ab4be4b9-eb3d-43ea-a32c-8763e70be217
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 11 GiB used: 1.61 GiB (14.6%)
    priority: -2 dev: /dev/nvme0n1p4 maj-min: 259:4 label: N/A
    uuid: feb7c417-87a9-413c-ae17-fb925a517a01
Unmounted:
  ID-1: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: N/A label: N/A
    uuid: N/A
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 139.18 GiB fs: ntfs label: OS
    uuid: DC20475720473832
  ID-3: /dev/nvme0n1p7 maj-min: 259:7 size: 1.03 GiB fs: ntfs
    label: RECOVERY uuid: E6BAAD46BAAD13D9
  ID-4: /dev/sda1 maj-min: 8:1 size: 901.51 GiB fs: ntfs label: New Volume
    uuid: 800C3F790C3F6974
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-4:5 info: No brand USB OPTICAL MOUSE type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
    power: 100mA chip-ID: 2188:0ae1 class-ID: 0301
  Hub-2: 2-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 2-2:3 info: ASIX AX88179 Gigabit Ethernet type: Network
    driver: ax88179_178a interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 496mA
    chip-ID: 0b95:1790 class-ID: ff00 serial: <filter>
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
    class-ID: e001
  Device-2: 3-3:3 info: IMC Networks USB2.0 HD UVC WebCam type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 13d3:56a8 class-ID: 0e02 serial: <filter>
  Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 38.8 C mobo: 38.0 C gpu: amdgpu temp: 38.0 C
  Fan Speeds (RPM): cpu: 0
Info:
  Processes: 308 Uptime: 1d 4h 28m wakeups: 16 Init: systemd v: 250
  tool: systemctl Compilers: gcc: 11.1.0 clang: 13.0.0 Packages: 1412
  pacman: 1409 lib: 387 flatpak: 3 Shell: Zsh (sudo) v: 5.8
  running-in: konsole inxi: 3.3.12

Those are buttons not tabs. Now that said how a bout a screenshot of your entire Pamac? Thanks

Seems like a theme issue.

What GTK3 theme are you using?

Sure. :slight_smile:

$ gtk-launch --version
3.24.31

Which color are you using? Settings > Appearance > Colors

Also provide Window Decorations.

I asked about the theme used. Not the version of gtk you have installed.

Color used - Custom (Cyan)
Window Decorations - Breeze

Oh sorry. :slight_smile:
My global theme is - Breath Light

Try using Breeze GTK theme. (I do on my end).

1 Like

I tried changing the theme to Breeze. Doesn’t seem to help. :frowning:

Thanks a lot guys for your efforts. Apparently this is because I have set font dpi to 130.
System Settings → Appearence → Fonts → Force font dpi = 130.
(Without making this the fonts appear too small :frowning: )

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.