a simple question. Why the hack are you using the real-time kernel ?
It’s already known that you MUST know what you’re doing and that RT-Kernels are NOT recommended for normal use due to the fact that it always cause trouble !!!
1 Like
Honestly, I have no idea. My first installation of Manjaro was an RT-kernel and I’ve stayed with it for years with all the updates. Wasn’t until recently have I had issues. I already tried downgrading and upgrading to 6.0 however I keep getting stuck at the “root cleaning” message on bootup. I’m stuck with 5.19.0-3-rt10
The issue is definitely Nvidia drivers and I’m also seeing NVME read in & out error messages if I update or switch kernels. Don’t know what to do except stay with what I have and fight the urge to update anything.
I will ride out the storm!
post output from:
mhwd-kernel -li && mhwd -l && mhwd -li
first things first, please post the output of
inxi --admin --verbosity=7 --filter --no-host --width
that we can get an basic overview. your information till now aren’t useful.
and btw, what branch are you using ? please post also the info of your branch
pacman-mirrors -G
Currently running: 5.19.0-3-rt10-MANJARO (linux519)
The following kernels are installed in your system:
* linux519-rt
> 0000:2d:00.0 (0300:10de:1c82) Display controller nVidia Corporation:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-nvidia 2021.11.04 false PCI
video-nvidia-470xx 2021.11.04 false PCI
video-nvidia-390xx 2021.11.26 false PCI
video-linux 2018.05.04 true PCI
video-modesetting 2020.01.13 true PCI
video-vesa 2017.03.12 true PCI
> 0000:27:00.0 (0200:10ec:8168) Network controller Realtek Semiconductor Co., Ltd.:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
network-r8168 2016.04.20 true PCI
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-nvidia 2021.12.18 false PCI
Warning: No installed USB configs!
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text
pacman-mirrors -G i get only the word “stable” as the result.
the inxi results in:
System:
Kernel: 5.19.0-3-rt10-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.19-rt-x86_64
root=UUID=649e0b3a-4dee-4243-b844-ee395fae1f3a rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: Xfce v: 4.16.1 tk: Gtk v: 3.24.34 info: xfce4-panel wm: xfwm
v: 4.16.1 vt: 7 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Micro-Star product: MS-7C37 v: 1.0
serial: <superuser required>
Mobo: Micro-Star model: MPG X570 GAMING EDGE WIFI (MS-7C37) v: 1.0
serial: <superuser required> UEFI: American Megatrends v: 1.80
date: 04/20/2020
Battery:
Device-1: hidpp_battery_0 model: Logitech M510 serial: <filter> charge: 55%
(should be ignored) rechargeable: yes status: discharging
Memory:
RAM: total: 15.57 GiB used: 1.4 GiB (9.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges
required.
CPU:
Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701013
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 3073 high: 4123 min/max: 2200/4208 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 2200
3: 4123 4: 2057 5: 3600 6: 3600 7: 3600 8: 3907 9: 3600 10: 2200 11: 2200
12: 3600 bogomips: 86398
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
rdtscp rep_good sep sev sev_es sha_ni skinit smap smca smep ssbd sse sse2
sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce topoext
tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme vmmcall
wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP
protection
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: Micro-Star MSI
driver: nvidia v: 515.76 alternate: nouveau,nvidia_drm non-free: 515.xx+
status: current (as of 2022-10) arch: Pascal code: GP10x
process: TSMC 16nm built: 2016-21 pcie: gen: 2 speed: 5 GT/s lanes: 16
link-max: gen: 3 speed: 8 GT/s bus-ID: 2d:00.0 chip-ID: 10de:1c82
class-ID: 0300
Display: x11 server: X.Org v: 21.1.4 compositor: xfwm v: 4.16.1 driver: X:
loaded: nvidia gpu: nvidia display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26")
s-diag: 583mm (22.95")
Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 93
size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A
Message: Unable to show GL data. Required tool glxinfo missing.
The rest is bluetooth, network, drive and audio info etc…
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text
well so far so good. let’s check the gpu-server, please post the output of
glxinfo | grep server
if glxinfo is not installed you need to install the package “mesa-utils” before running glxinfo, but it should be installed.
“command not found”
also when installing “mesa-utils” it sees a conflict and wants to remove and update the very thing that is causing the problem.
post output from:
pacman -Qs nvidia
ls /etc/mkinitcpio.d/*.preset
sudo ls /boot/initramfs-*
sudo ls /boot/vmlinuz-*
sudo ls /usr/lib/modules/*
and IF YOU tell us what “wants to remove…” then we can tell YOU what might cause the problem. but if you let us die as foolish we will dig in the dark till the last day !
do you understand ?
btw: do update or downgrade to a ordinary supported kernel that doesn’t cause trouble unless you are expert to deal with real-time-kernels and the hints with them. we already remembered you to do so but i think it’s wasted time if you stick on and waiting for wonders.
i’m out
pacman -Qs nvidia output
local/egl-wayland 2:1.1.11-2
EGLStream-based Wayland external platform
local/lib32-libvdpau 1.5-1
Nvidia VDPAU library
local/lib32-nvidia-utils 515.76-1
NVIDIA drivers utilities (32-bit)
local/libvdpau 1.5-1
Nvidia VDPAU library
local/libxnvctrl 515.76-1
NVIDIA NV-CONTROL X extension
local/linux519-rt-nvidia 515.76-1 (linux519-rt-extramodules)
NVIDIA drivers for linux
local/mhwd-nvidia 515.76-1
MHWD module-ids for nvidia 515.76
local/mhwd-nvidia-390xx 390.154-2
MHWD module-ids for nvidia 390.154
local/mhwd-nvidia-470xx 470.141.03-2
MHWD module-ids for nvidia 470.141.03
local/nvidia-utils 515.76-1
NVIDIA drivers utilities
ls /etc/mkinitcpio.d/*.preset
/etc/mkinitcpio.d/linux519-rt.preset
ls /boot/initramfs-*
/boot/initramfs-5.19-rt-x86_64-fallback.img
/boot/initramfs-5.19-rt-x86_64.img
ls /boot/vmlinuz-*
/boot/vmlinuz-5.19-rt-x86_64
ls /usr/lib/modules/*
/usr/lib/modules/5.19.0-3-rt10-MANJARO:
extramodules modules.builtin modules.dep.bin modules.symbols.bin
kernel modules.builtin.alias.bin modules.devname pkgbase
kernelbase modules.builtin.bin modules.order vmlinuz
modules.alias modules.builtin.modinfo modules.softdep
modules.alias.bin modules.dep modules.symbols
/usr/lib/modules/extramodules-5.19-rt-MANJARO:
nvidia-drm.ko.xz nvidia-modeset.ko.xz nvidia-uvm.ko.xz
nvidia.ko.xz nvidia-peermem.ko.xz version
Moderator edit: In the future, please use proper formatting: [HowTo] Post command output and file content as formatted text
$ mbn info nvidia-utils -q
Branch : archlinux
Name : nvidia-utils
Version : 520.56.06-2
Repository : extra
Build Date : Wed 19 Oct 2022 00:50:34
Packager : Sven-Hendrik Haase <svenstaro@gmail.com>
Branch : unstable
Name : nvidia-utils
Version : 520.56.06-2
Repository : extra
Build Date : Fri 14 Oct 2022 02:55:10
Packager : Mark Wagie <mark@manjaro.org>
Branch : testing
Name : nvidia-utils
Version : 520.56.06-2
Repository : extra
Build Date : Fri 14 Oct 2022 02:55:10
Packager : Mark Wagie <mark@manjaro.org>
Branch : stable
Name : nvidia-utils
Version : 520.56.06-2
Repository : extra
Build Date : Fri 14 Oct 2022 02:55:10
Packager : Mark Wagie <mark@manjaro.org>
$ mbn info linux519-rt-nvidia -q
Branch : unstable
Name : linux519-rt-nvidia
Version : 520.56.06-1
Repository : community
Build Date : Wed 12 Oct 2022 18:36:45
Packager : Mark Wagie <mark@manjaro.org>
Branch : testing
Name : linux519-rt-nvidia
Version : 520.56.06-1
Repository : community
Build Date : Wed 12 Oct 2022 18:36:45
Packager : Mark Wagie <mark@manjaro.org>
Branch : stable
Name : linux519-rt-nvidia
Version : 515.76-1
Repository : community
Build Date : Thu 22 Sep 2022 16:04:38
Packager : Bernhard Landauer <oberon@manjaro.org>
Keep calm and wait a bit until it arrived stable branch.
it looks like you have to wait when the nvidia drivers are being shipped to the stable branch, which could be weeks… or you can resolve this issue from chroot… boot into manjaro live usb, connect to internet, enter chroot:
manjaro-chroot -a
(this command doesnt work with btrfs or encryption, you have to chroot manually);
uninstall nvidia:
mhwd -r pci video-nvidia
uninstall the rt kernel:
pacman -R linux519-rt
rerun update:
pacman-mirrors --fasttrack 5 && pacman -Syyu
install 515 kernel:
pacman -S linux515
install nvidia:
mhwd -i pci video-nvidia
exit chroot:
exit
reboot
Still stuck on kernel 5.19.0_rt10-3 unsupported. I’ve installed many different kernels and cannot switch due to dependency issues with nvidia drivers. Maybe I should try and plug monitor into motherboard hdmi when updating?
Well… 5.19-rt is unsupported. Why not just removing it plus dependencies?
Removing it causes a no-boot. Stuck on “root clean”
Under hardware config display controller GP107 GeForce GTX 1050 Ti there’s a list of open-source and installed-- video-nvidia-470xx, video-nvidia-390xx are both unchecked.
video-nvidia installed is checked, video-linux “open-source” is checked along with video-modesetting and video-vesa
So… what are actually the “dependency issues”?
Guess you run this?
sudo mhwd-kernel --remove linux519-rt
If that is removed I can’t get past root clean on boot screen.
The reinstall the video-nvidia and remove video-vesa.
kernel 5.19.0_rt10-3
Everything was running fine till last update then nvidia drivers caused a no-boot issue stuck at root clean.
Switching kernels results gives “mount: /sys/firmware/efi/efivars: unknown filesystem type ‘efivarfs’”
I just want to switch to a stable Ls kernel. I don’t have a dual boot so why the efi?