Not Charging and Undetected Battery

Support
1

I have an Hp 8470p Laptop which has been working for years and haven’t seen any battery hiccups. It was left unused for like 3 days and when I tried to use it, it doesnt boot up using battery. However It is completely running fine when its on AC and only if the Battery is removed.
When I try to boot it up with battery , device hangs on a blackscreen and then the fan spins very fast as its like using a lot of resources but its not even reashing the boot animation or the splash screen itself,

when charged, battery/charging light is flashing rapidly. I tried to charge it on Bios but no luck,
ACPI is not showing information

ACPI-TOOL shows    
  Battery status : <not available>
  AC adapter     : <info not available> 
  Thermal info   : <not available>

General info:
System:
  Kernel: 5.10.18-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 
  root=UUID=8d3c71fe-2d9a-4aa7-9fd0-0de4dae0023e rw quiet acpi_backlight=none 
  apparmor=1 security=apparmor 
  resume=UUID=012b2228-da15-4a81-861d-f61455e3e0d2 udev.log_priority=3 
  Desktop: KDE Plasma 5.21.1 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM 
  Distro: Manjaro Linux 
Machine:
  Type: Laptop System: Hewlett-Packard product: HP EliteBook 8470p 
  v: A1029D1102 serial: <filter> Chassis: type: 10 serial: <filter> 
  Mobo: Hewlett-Packard model: 179B v: KBC Version 42.38 serial: <filter> 
  UEFI: Hewlett-Packard v: 68ICF Ver. F.74 date: 04/11/2019 
CPU:
  Info: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP 
  arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 
  L2 cache: 3 MiB 
  flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20760 
  Speed: 1198 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1198 2: 1199 
  3: 1197 4: 1197 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf 
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
  IBRS_FW, STIBP: conditional, RSB filling 
  Type: srbds status: Vulnerable: No microcode 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: AMD Thames [Radeon HD 7550M/7570M/7650M] vendor: Hewlett-Packard 
  driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6841 class ID: 0300 
  Device-2: Primax HP HD Webcam [Fixed] type: USB driver: uvcvideo 
  bus ID: 1-1.3:4 chip ID: 0461:4dfe class ID: 0e02 serial: <filter> 
  Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: 
  loaded: ati,radeon unloaded: modesetting alternate: fbdev,vesa 
  display ID: :0 screens: 1 
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.7x9.4") 
  s-diag: 485mm (19.1") 
  Monitor-1: LVDS res: 1600x900 hz: 60 dpi: 131 size: 310x174mm (12.2x6.9") 
  diag: 355mm (14") 
  OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 5.10.18-1-MANJARO LLVM 11.1.0) 
  v: 3.3 Mesa 20.3.4 compat-v: 3.1 direct render: Yes 
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio 
  vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  chip ID: 8086:1e20 class ID: 0403 
  Device-2: AMD Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] 
  vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 01:00.1 
  chip ID: 1002:aa90 class ID: 0403 
  Sound Server: ALSA v: k5.10.18-1-MANJARO 
Network:
  Device-1: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi 
  v: kernel port: 4000 bus ID: 25:00.0 chip ID: 8086:0085 class ID: 0280 
  IF: wlan0 state: up mac: <filter> 
  Device-2: Qualcomm Atheros AR9271 802.11n type: USB driver: ath9k_htc 
  bus ID: 3-4:2 chip ID: 0cf3:9271 class ID: ff00 serial: <filter> 
  IF: wlan1 state: down mac: <filter> 
Bluetooth:
  Device-1: Broadcom HP Portable SoftSailing type: USB driver: btusb v: 0.8 
  bus ID: 2-1.6:3 chip ID: 0a5c:21e1 class ID: fe01 serial: <filter> 
  Message: Required tool hciconfig not installed. Check --recommends 
Drives:
  Local Storage: total: 298.09 GiB used: 49.28 GiB (16.5%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital 
  model: WD3200LPVX-22V0TT0 size: 298.09 GiB block size: physical: 4096 B 
  logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 1A01 
  scheme: GPT 
Partition:
  ID-1: / raw size: 289.49 GiB size: 283.94 GiB (98.09%) 
  used: 49.28 GiB (17.4%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 
  ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%) 
  used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 8.31 GiB used: 2 MiB (0.0%) priority: -2 
  dev: /dev/sda3 maj-min: 8:3 
Sensors:
  System Temperatures: cpu: 58.0 C mobo: 53.0 C gpu: radeon temp: 54.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 194 Uptime: 6h 31m wakeups: 2 Memory: 3.77 GiB 
  used: 1.4 GiB (37.0%) Init: systemd v: 247 Compilers: gcc: 10.2.0 
  clang: 11.1.0 Packages: 1466 pacman: 1456 lib: 417 flatpak: 6 snap: 4 
  Shell: Bash v: 5.1.0 running in: konsole inxi: 3.3.01

Tried to update the whole system but nothing happens at all.
Now it turns on even the battery is inserted but needed to be on ac adapter and the yellow charging light is still flashing while showing X on the battery Icon.

It might be a battery issue but I have no Idea how to confirm is this is software related one or simply the battery is dead. Laptop is like manufactured around 2013 as I can see on the hardware stickers.

2

Hello could you paste the output of inxi --admin --verbosity=7 --filter --no-host --width ?

3

Sure, just a second. I tried to update even Acpi call, downgrade kernel. Tried to insert the battery while booting, battery is detected at 0% not charging, 100% health. I’ll post the output of that command

4 
*     System:
*   Kernel: 5.4.100-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1 
*   parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64 
*   root=UUID=8d3c71fe-2d9a-4aa7-9fd0-0de4dae0023e rw quiet acpi_backlight=none 
*   apparmor=1 security=apparmor 
*   resume=UUID=012b2228-da15-4a81-861d-f61455e3e0d2 udev.log_priority=3 
*   Desktop: KDE Plasma 5.21.1 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM 
*   Distro: Manjaro Linux 
* Machine:
*   Type: Laptop System: Hewlett-Packard product: HP EliteBook 8470p 
*   v: A1029D1102 serial: <filter> Chassis: type: 10 serial: <filter> 
*   Mobo: Hewlett-Packard model: 179B v: KBC Version 42.38 serial: <filter> 
*   UEFI: Hewlett-Packard v: 68ICF Ver. F.74 date: 04/11/2019 
* Memory:
*   RAM: total: 3.78 GiB used: 926.4 MiB (23.9%) 
*   RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
* CPU:
*   Info: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP 
*   arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 
*   L2 cache: 3 MiB bogomips: 20760 
*   Speed: 1197 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1197 2: 1199 
*   3: 1201 4: 1198 
*   Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov 
*   constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept 
*   erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs ida 
*   lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat 
*   pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdrand 
*   rdtscp rep_good sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp 
*   syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid x2apic 
*   xsave xsaveopt xtopology xtpr 
*   Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
*   Type: l1tf 
*   mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
*   Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
*   Type: meltdown mitigation: PTI 
*   Type: spec_store_bypass 
*   mitigation: Speculative Store Bypass disabled via prctl and seccomp 
*   Type: spectre_v1 
*   mitigation: usercopy/swapgs barriers and __user pointer sanitization 
*   Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
*   IBRS_FW, STIBP: conditional, RSB filling 
*   Type: srbds status: Vulnerable: No microcode 
*   Type: tsx_async_abort status: Not affected 
* Graphics:
*   Device-1: AMD Thames [Radeon HD 7550M/7570M/7650M] vendor: Hewlett-Packard 
*   driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6841 class ID: 0300 
*   Device-2: Primax HP HD Webcam [Fixed] type: USB driver: uvcvideo 
*   bus ID: 1-1.3:4 chip ID: 0461:4dfe class ID: 0e02 serial: <filter> 
*   Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: 
*   loaded: ati,radeon unloaded: modesetting alternate: fbdev,vesa 
*   display ID: :0 screens: 1 
*   Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.7x9.4") 
*   s-diag: 485mm (19.1") 
*   Monitor-1: LVDS res: 1600x900 hz: 60 dpi: 131 size: 310x174mm (12.2x6.9") 
*   diag: 355mm (14") 
*   OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 5.4.100-1-MANJARO LLVM 11.1.0) 
*   v: 3.3 Mesa 20.3.4 compat-v: 3.1 direct render: Yes 
* Audio:
*   Device-1: Intel 7 Series/C216 Family High Definition Audio 
*   vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
*   chip ID: 8086:1e20 class ID: 0403 
*   Device-2: AMD Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] 
*   vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 01:00.1 
*   chip ID: 1002:aa90 class ID: 0403 
*   Sound Server: ALSA v: k5.4.100-1-MANJARO 
* Network:
*   Device-1: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi 
*   v: kernel port: 4000 bus ID: 25:00.0 chip ID: 8086:0085 class ID: 0280 
*   IF: wlan0 state: up mac: <filter> 
*   IP v4: <filter> type: dynamic noprefixroute scope: global 
*   broadcast: <filter> 
*   IP v6: <filter> type: noprefixroute scope: link 
*   WAN IP: <filter> 
* Bluetooth:
*   Device-1: Broadcom HP Portable SoftSailing type: USB driver: btusb v: 0.8 
*   bus ID: 4-1.6:3 chip ID: 0a5c:21e1 class ID: fe01 serial: <filter> 
*   Message: Required tool hciconfig not installed. Check --recommends 
* RAID:
*   Message: No RAID data was found. 
* Drives:
*   Local Storage: total: 298.09 GiB used: 51.14 GiB (17.2%) 
*   SMART Message: Unable to run smartctl. Root privileges required. 
*   ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital 
*   model: WD3200LPVX-22V0TT0 size: 298.09 GiB block size: physical: 4096 B 
*   logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 1A01 
*   scheme: GPT 
*   Optical-1: /dev/sr0 vendor: hp model: DVDRAM GT50N rev: MP01 
*   dev-links: cdrom 
*   Features: speed: 24 multisession: yes audio: yes dvd: yes 
*   rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
* Partition:
*   ID-1: / raw size: 289.49 GiB size: 283.94 GiB (98.09%) 
*   used: 51.14 GiB (18.0%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A 
*   uuid: 8d3c71fe-2d9a-4aa7-9fd0-0de4dae0023e 
*   ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%) 
*   used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A 
*   uuid: 75A5-8B67 
* Swap:
*   Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
*   ID-1: swap-1 type: partition size: 8.31 GiB used: 0 KiB (0.0%) priority: -2 
*   dev: /dev/sda3 maj-min: 8:3 label: N/A 
*   uuid: 012b2228-da15-4a81-861d-f61455e3e0d2 
* Unmounted:
*   Message: No Unmounted partitions found. 
* USB:
*   Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 
*   speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
*   Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 
*   speed: 480 Mb/s chip ID: 8087:0024 class ID: 0900 
*   Device-1: 1-1.1:3 info: Validity Sensors VFS491 type: <vendor specific> 
*   driver: N/A interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 138a:003d 
*   class ID: ff00 serial: <filter> 
*   Device-2: 1-1.3:4 info: Primax HP HD Webcam [Fixed] type: Video 
*   driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0461:4dfe 
*   class ID: 0e02 serial: <filter> 
*   Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
*   speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
*   Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
*   chip ID: 1d6b:0003 class ID: 0900 
*   Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 
*   speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
*   Hub-6: 4-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 
*   speed: 480 Mb/s chip ID: 8087:0024 class ID: 0900 
*   Device-1: 4-1.6:3 info: Broadcom HP Portable SoftSailing type: Bluetooth 
*   driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0a5c:21e1 
*   class ID: fe01 serial: <filter> 
* Sensors:
*   System Temperatures: cpu: 45.0 C mobo: 40.0 C gpu: radeon temp: 40.0 C 
*   Fan Speeds (RPM): N/A 
* Info:
*   Processes: 169 Uptime: 6m wakeups: 1 Init: systemd v: 247 Compilers: 
*   gcc: 10.2.0 clang: 11.1.0 Packages: 1467 pacman: 1457 lib: 417 flatpak: 6 
*   snap: 4 Shell: Bash v: 5.1.0 running in: konsole inxi: 3.3.01 
* System:
*   Kernel: 5.4.100-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1 
*   parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64 
*   root=UUID=8d3c71fe-2d9a-4aa7-9fd0-0de4dae0023e rw quiet acpi_backlight=none 
*   apparmor=1 security=apparmor 
*   resume=UUID=012b2228-da15-4a81-861d-f61455e3e0d2 udev.log_priority=3 
*   Desktop: KDE Plasma 5.21.1 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM 
*   Distro: Manjaro Linux 
* Machine:
*   Type: Laptop System: Hewlett-Packard product: HP EliteBook 8470p 
*   v: A1029D1102 serial: <filter> Chassis: type: 10 serial: <filter> 
*   Mobo: Hewlett-Packard model: 179B v: KBC Version 42.38 serial: <filter> 
*   UEFI: Hewlett-Packard v: 68ICF Ver. F.74 date: 04/11/2019 
* Memory:
*   RAM: total: 3.78 GiB used: 926.4 MiB (23.9%) 
*   RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
* CPU:
*   Info: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP 
*   arch: Ivy Bridge family: 6 model-id: 3A (58) stepping: 9 microcode: 21 
*   L2 cache: 3 MiB bogomips: 20760 
*   Speed: 1197 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1197 2: 1199 
*   3: 1201 4: 1198 
*   Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov 
*   constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept 
*   erms est f16c flexpriority flush_l1d fpu fsgsbase fxsr ht ibpb ibrs ida 
*   lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc nopl nx pae pat 
*   pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdrand 
*   rdtscp rep_good sep smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp 
*   syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi vpid x2apic 
*   xsave xsaveopt xtopology xtpr 
*   Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
*   Type: l1tf 
*   mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
*   Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
*   Type: meltdown mitigation: PTI 
*   Type: spec_store_bypass 
*   mitigation: Speculative Store Bypass disabled via prctl and seccomp 
*   Type: spectre_v1 
*   mitigation: usercopy/swapgs barriers and __user pointer sanitization 
*   Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, 
*   IBRS_FW, STIBP: conditional, RSB filling 
*   Type: srbds status: Vulnerable: No microcode 
*   Type: tsx_async_abort status: Not affected 
* Graphics:
*   Device-1: AMD Thames [Radeon HD 7550M/7570M/7650M] vendor: Hewlett-Packard 
*   driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:6841 class ID: 0300 
*   Device-2: Primax HP HD Webcam [Fixed] type: USB driver: uvcvideo 
*   bus ID: 1-1.3:4 chip ID: 0461:4dfe class ID: 0e02 serial: <filter> 
*   Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: 
*   loaded: ati,radeon unloaded: modesetting alternate: fbdev,vesa 
*   display ID: :0 screens: 1 
*   Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.7x9.4") 
*   s-diag: 485mm (19.1") 
*   Monitor-1: LVDS res: 1600x900 hz: 60 dpi: 131 size: 310x174mm (12.2x6.9") 
*   diag: 355mm (14") 
*   OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 5.4.100-1-MANJARO LLVM 11.1.0) 
*   v: 3.3 Mesa 20.3.4 compat-v: 3.1 direct render: Yes 
* Audio:
*   Device-1: Intel 7 Series/C216 Family High Definition Audio 
*   vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
*   chip ID: 8086:1e20 class ID: 0403 
*   Device-2: AMD Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] 
*   vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 01:00.1 
*   chip ID: 1002:aa90 class ID: 0403 
*   Sound Server: ALSA v: k5.4.100-1-MANJARO 
* Network:
*   Device-1: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi 
*   v: kernel port: 4000 bus ID: 25:00.0 chip ID: 8086:0085 class ID: 0280 
*   IF: wlan0 state: up mac: <filter> 
*   IP v4: <filter> type: dynamic noprefixroute scope: global 
*   broadcast: <filter> 
*   IP v6: <filter> type: noprefixroute scope: link 
*   WAN IP: <filter> 
* Bluetooth:
*   Device-1: Broadcom HP Portable SoftSailing type: USB driver: btusb v: 0.8 
*   bus ID: 4-1.6:3 chip ID: 0a5c:21e1 class ID: fe01 serial: <filter> 
*   Message: Required tool hciconfig not installed. Check --recommends 
* RAID:
*   Message: No RAID data was found. 
* Drives:
*   Local Storage: total: 298.09 GiB used: 51.14 GiB (17.2%) 
*   SMART Message: Unable to run smartctl. Root privileges required. 
*   ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital 
*   model: WD3200LPVX-22V0TT0 size: 298.09 GiB block size: physical: 4096 B 
*   logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 1A01 
*   scheme: GPT 
*   Optical-1: /dev/sr0 vendor: hp model: DVDRAM GT50N rev: MP01 
*   dev-links: cdrom 
*   Features: speed: 24 multisession: yes audio: yes dvd: yes 
*   rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
* Partition:
*   ID-1: / raw size: 289.49 GiB size: 283.94 GiB (98.09%) 
*   used: 51.14 GiB (18.0%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: N/A 
*   uuid: 8d3c71fe-2d9a-4aa7-9fd0-0de4dae0023e 
*   ID-2: /boot/efi raw size: 300 MiB size: 299.4 MiB (99.80%) 
*   used: 312 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A 
*   uuid: 75A5-8B67 
* Swap:
*   Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
*   ID-1: swap-1 type: partition size: 8.31 GiB used: 0 KiB (0.0%) priority: -2 
*   dev: /dev/sda3 maj-min: 8:3 label: N/A 
*   uuid: 012b2228-da15-4a81-861d-f61455e3e0d2 
* Unmounted:
*   Message: No Unmounted partitions found. 
* USB:
*   Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 
*   speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
*   Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 
*   speed: 480 Mb/s chip ID: 8087:0024 class ID: 0900 
*   Device-1: 1-1.1:3 info: Validity Sensors VFS491 type: <vendor specific> 
*   driver: N/A interfaces: 1 rev: 1.1 speed: 12 Mb/s chip ID: 138a:003d 
*   class ID: ff00 serial: <filter> 
*   Device-2: 1-1.3:4 info: Primax HP HD Webcam [Fixed] type: Video 
*   driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 0461:4dfe 
*   class ID: 0e02 serial: <filter> 
*   Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
*   speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
*   Hub-4: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
*   chip ID: 1d6b:0003 class ID: 0900 
*   Hub-5: 4-0:1 info: Full speed (or root) Hub ports: 3 rev: 2.0 
*   speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
*   Hub-6: 4-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 
*   speed: 480 Mb/s chip ID: 8087:0024 class ID: 0900 
*   Device-1: 4-1.6:3 info: Broadcom HP Portable SoftSailing type: Bluetooth 
*   driver: btusb interfaces: 4 rev: 2.0 speed: 12 Mb/s chip ID: 0a5c:21e1 
*   class ID: fe01 serial: <filter> 
* Sensors:
*   System Temperatures: cpu: 45.0 C mobo: 40.0 C gpu: radeon temp: 40.0 C 
*   Fan Speeds (RPM): N/A 
* Info:
*   Processes: 169 Uptime: 6m wakeups: 1 Init: systemd v: 247 Compilers: 
*   gcc: 10.2.0 clang: 11.1.0 Packages: 1467 pacman: 1457 lib: 417 flatpak: 6 
*   snap: 4 Shell: Bash v: 5.1.0 running in: konsole inxi: 3.3.01
5

No battery info unless I’ve missed it?
Did you got your battery inserted while launching your command?

6

Yeah. The battery is inserted.

7

I’ll try to insert it while booting to have it detected but not charging. Sorry mate for late replies, life’s rough a bit

8