I’ve been living for this for quite some time, but even though I have have set ~1 month leases on my DHCP server, every hour on the nose, it says there is a state change and the DHCP lease renews. This is also a wired CAT6 interface pretty close to the switch. And I’m confident this is not a hardware issue.
The most notable change from a default install regarding this, is I use a bridged interface for QEMU. But this all works perfectly fine, and has been for about 2 years. But the OCD part of me really wants to get rid of this log spam.
May 31 10:00:23 mbox NetworkManager[958]: <info> [1685548823.3249] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 31 10:00:23 mbox dbus-daemon[877]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.6' (uid=0 pid=958 comm="/usr/bin/NetworkManager --no-daemon")
May 31 10:00:23 mbox systemd[1]: Starting Network Manager Script Dispatcher Service...
May 31 10:00:23 mbox dbus-daemon[877]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
May 31 10:00:23 mbox systemd[1]: Started Network Manager Script Dispatcher Service.
May 31 10:00:23 mbox audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 31 10:00:23 mbox kernel: audit: type=1130 audit(1685548823.381:507): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 31 10:00:33 mbox systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.
May 31 10:00:33 mbox audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
May 31 10:00:33 mbox kernel: audit: type=1131 audit(1685548833.421:508): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=unconfined msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
So I will get chunk of that text, every hour on the nose.
May 30 16:09:42 mbox NetworkManager[958]: <info> [1685484582.0576] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 17:09:42 mbox NetworkManager[958]: <info> [1685488182.0276] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 18:09:42 mbox NetworkManager[958]: <info> [1685491782.0276] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 19:09:42 mbox NetworkManager[958]: <info> [1685495382.0274] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 20:09:42 mbox NetworkManager[958]: <info> [1685498982.0275] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 21:09:42 mbox NetworkManager[958]: <info> [1685502582.0277] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 22:09:42 mbox NetworkManager[958]: <info> [1685506182.0277] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 30 23:09:42 mbox NetworkManager[958]: <info> [1685509782.0277] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 31 00:09:42 mbox NetworkManager[958]: <info> [1685513382.0279] dhcp4 (br0): state changed new lease, address=10.2.4.10
May 31 01:09:42 mbox NetworkManager[958]: <info> [1685516982.0279] dhcp4 (br0): state changed new lease, address=10.2.4.10
This must be something simple I’m missing, since I’ve gone through thousands of package and kernel updates even relating to this over the last 2 years on this install. Searching for hours on end has not helped me solve this. I thought into going into looking at all the possible NetworkManager.conf options would help. But I’m still stumped.
Any ideas?
inxi -v7azy
System:
Kernel: 6.1.30-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1-x86_64
root=UUID=310e0472-f96e-485c-8fa1-585bcccfb624 rw rootflags=subvol=@
apparmor=1 security=apparmor
resume=UUID=9f5a3a86-21ad-4bcc-9db7-2377aee3d05c udev.log_priority=3
amd_iommu=on vfio-pci.ids=10de:2216,10de:1aef video=efifb:off
fbcon=rotate:1
Desktop: GNOME v: 43.5 tk: GTK v: 3.24.37 wm: gnome-shell dm: GDM v: 44.0
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: X570S AERO G v: -CF serial: N/A
Mobo: Gigabyte model: X570S AERO G serial: N/A UEFI: American Megatrends
LLC. v: F4c date: 05/12/2022
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: available: 46.95 GiB used: 30.21 GiB (64.4%)
Array-1: capacity: 128 GiB slots: 4 EC: None max-module-size: 32 GiB
note: est.
Device-1: DIMM 0 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 8 GiB speed: 2133 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Corsair part-no: CMK16GX4M2D3600C18
serial: N/A
Device-2: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2133 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMK32GX4M2D3600C18 serial: N/A
Device-3: DIMM 0 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 16 GiB speed: 2133 MT/s volts: curr: 1.2 min: 1.2 max: 1.2
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMK32GX4M2D3600C18 serial: N/A
Device-4: DIMM 1 type: DDR4 detail: synchronous unbuffered (unregistered)
size: 8 GiB speed: 2133 MT/s volts: curr: 1.2 min: 1.2 max: 1.2 width (bits):
data: 64 total: 64 manufacturer: Corsair part-no: CMK16GX4M2D3600C18
serial: N/A
CPU:
Info: model: AMD Ryzen 9 5900X socket: AM4 bits: 64 type: MT MCP arch: Zen 3+
gen: 4 level: v3 note: check built: 2022 process: TSMC n6 (7nm)
family: 0x19 (25) model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB desc: 12x512 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 2200 min/max: 2200/4950 boost: enabled
base/boost: 3700/4950 scaling: driver: acpi-cpufreq governor: schedutil
volts: 1.1 V ext-clock: 100 MHz cores: 1: 2200 2: 2200 3: 2200 4: 2200
5: 2200 6: 2200 7: 2200 8: 2200 9: 2200 10: 2200 11: 2200 12: 2200 13: 2200
14: 2200 15: 2200 16: 2200 17: 2200 18: 2200 19: 2200 20: 2200 21: 2200
22: 2200 23: 2200 24: 2200 bogomips: 177685
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] vendor: VISIONTEK
driver: radeon v: kernel alternate: amdgpu arch: TeraScale-2 code: Evergreen
process: TSMC 32-40nm built: 2009-15 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
link-max: gen: 2 speed: 5 GT/s lanes: 16 ports: active: HDMI-A-1
empty: DVI-D-1,VGA-1 bus-ID: 04:00.0 chip-ID: 1002:68f9 class-ID: 0300
Device-2: NVIDIA GA102 [GeForce RTX 3080 Lite Hash Rate] vendor: Gigabyte
driver: vfio-pci v: N/A alternate: nouveau non-free: 530.xx+
status: current (as of 2023-05) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 0c:00.0
chip-ID: 10de:2216 class-ID: 0300
Display: server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.1
compositor: gnome-shell driver: X: loaded: nouveau unloaded: modesetting
alternate: fbdev,nv,vesa gpu: radeon display-ID: :0 screens: 1
Screen-1: 0 s-res: 1080x1920 s-size: <missing: xdpyinfo>
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer XB241YU serial: <filter>
built: 2017 res: 1080x1920 hz: 60 dpi: 91 gamma: 1.2
size: 300x530mm (11.81x20.87") diag: 604mm (23.8") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: OpenGL Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
vendor: VISIONTEK driver: snd_hda_intel v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 4 link-max: gen: 2 speed: 5 GT/s lanes: 16
bus-ID: 04:00.1 chip-ID: 1002:aa68 class-ID: 0403
Device-2: NVIDIA GA102 High Definition Audio vendor: Gigabyte
driver: vfio-pci alternate: snd_hda_intel pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 0c:00.1
chip-ID: 10de:1aef class-ID: 0403
Device-3: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0e:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.1.30-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.70 status: n/a (root, process)
with: pipewire-media-session status: active tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active (root, process) with:
1: pulseaudio-alsa type: plugin 2: pulseaudio-jack type: module
tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp7s0 state: down mac: <filter>
Device-2: Intel Ethernet I225-V vendor: Gigabyte driver: igc v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 08:00.0
chip-ID: 8086:15f3 class-ID: 0200
IF: enp8s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-2: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-3: vnet2 state: unknown speed: 10 Mbps duplex: full mac: <filter>
Message: Output throttled. IPs: 1; Limit: 10; Override: --limit [1-x;-1
all]
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-5:3 chip-ID: 8087:0029
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 13.65 TiB used: 4.71 TiB (34.6%)
ID-1: /dev/nvme0n1 maj-min: 259:4 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 3B2QEXM7 temp: 43.9 C scheme: GPT
SMART: yes health: PASSED on: 24d 18h cycles: 671
read-units: 8,694,008 [4.45 TB] written-units: 14,412,557 [7.37 TB]
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Samsung model: SSD 990 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 0B2QJXD7 temp: 52.9 C
scheme: GPT
SMART: yes health: PASSED on: 6d 15h cycles: 138
read-units: 11,707,327 [5.99 TB] written-units: 9,235,199 [4.72 TB]
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD60EZRZ-00GZ5B1
family: Blue size: 5.46 TiB block-size: physical: 4096 B logical: 512 B
sata: 3.1 speed: 6.0 Gb/s tech: HDD rpm: 5700 serial: <filter> fw-rev: 0A80
temp: 34 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 202d 19h cycles: 2245
ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD60EZRZ-00RWYB1 family: Blue size: 5.46 TiB block-size:
physical: 4096 B logical: 512 B sata: 3.1 speed: 6.0 Gb/s tech: HDD
rpm: 5700 serial: <filter> fw-rev: 0A80 temp: 32 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 1y 203d 3h cycles: 2246
read: 3.81 TiB written: 18.58 TiB
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 896.78 GiB size: 896.78 GiB (100.00%)
used: 426.29 GiB (47.5%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:6 label: N/A uuid: 310e0472-f96e-485c-8fa1-585bcccfb624
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 568 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p1
maj-min: 259:5 label: NO_LABEL uuid: 22BD-3A90
ID-3: /home raw-size: 896.78 GiB size: 896.78 GiB (100.00%)
used: 426.29 GiB (47.5%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:6 label: N/A uuid: 310e0472-f96e-485c-8fa1-585bcccfb624
ID-4: /mnt/hdd raw-size: 5.46 TiB size: 5.46 TiB (100.00%)
used: 4.3 TiB (78.7%) fs: btrfs block-size: 4096 B dev: /dev/sda1
maj-min: 8:1 label: N/A uuid: 79d7cd2a-98ea-4866-a9a9-e1a84e2e6ae1
ID-5: /var/cache raw-size: 896.78 GiB size: 896.78 GiB (100.00%)
used: 426.29 GiB (47.5%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:6 label: N/A uuid: 310e0472-f96e-485c-8fa1-585bcccfb624
ID-6: /var/log raw-size: 896.78 GiB size: 896.78 GiB (100.00%)
used: 426.29 GiB (47.5%) fs: btrfs block-size: 4096 B dev: /dev/nvme0n1p2
maj-min: 259:6 label: N/A uuid: 310e0472-f96e-485c-8fa1-585bcccfb624
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 34.44 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:7 label: swap
uuid: 9f5a3a86-21ad-4bcc-9db7-2377aee3d05c
Unmounted:
ID-1: /dev/nvme1n1p1 maj-min: 259:8 size: 100 MiB fs: vfat label: N/A
uuid: 9475-F14A
ID-2: /dev/nvme1n1p2 maj-min: 259:9 size: 16 MiB fs: N/A label: N/A
uuid: N/A
ID-3: /dev/nvme1n1p3 maj-min: 259:10 size: 1.82 TiB fs: ntfs label: os-sdd
uuid: FC2C79602C79173C
ID-4: /dev/sdb1 maj-min: 8:17 size: 5.46 TiB fs: btrfs label: N/A
uuid: 79d7cd2a-98ea-4866-a9a9-e1a84e2e6ae1
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 2-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-1:2 info: Integrated Express RGB LED Controller type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 048d:5702 class-ID: 0300
Hub-4: 3-6:3 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 3-6.1:4 info: Apple Aluminium Keyboard (ANSI)
type: keyboard,mouse driver: apple,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 250mA
chip-ID: 05ac:024f class-ID: 0301
Hub-5: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-6: 5-0:1 info: hi-speed hub with single TT ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 5-1:2 info: Logitech G303 Gaming Mouse type: mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c080 class-ID: 0300
serial: <filter>
Device-2: 5-5:3 info: Intel AX200 Bluetooth type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-7: 5-6:4 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 5-6.1:5 info: ATECH FLASH Multi-Reader type: mass storage
driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s)
lanes: 1 mode: 2.0 power: 500mA chip-ID: 11b0:6369 class-ID: 0806
serial: <filter>
Hub-8: 6-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 51.8 C mobo: N/A gpu: radeon temp: 42.5 C
Fan Speeds (RPM): N/A
Info:
Processes: 500 Uptime: 23h 53m wakeups: 2 Init: systemd v: 252
default: graphical tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7
Packages: 1482 pm: pacman pkgs: 1474 libs: 361
tools: gnome-software,pamac,yay pm: flatpak pkgs: 8 Shell: Bash (sudo)
v: 5.1.16 running-in: tmux: inxi: 3.3.27
rarely use it. I guess that’s worth a shot.