Hello,
I’ve been using Manjaro for a while now but the system always felt slugish when connecting trough google remote desktop.
I now pinpointed the problem to a missing ethernet driver, but I can’t seem to connect the dots how to install the driver:
inxi --admin --verbosity=7 --filter --width
System:
Kernel: 6.5.3-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.5-x86_64
root=UUID=29649f05-10b5-4df2-9d3a-46c207e3f665 rw quiet splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 dm: LightDM v: 1.32.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: MSI model: Z170A GAMING M7 (MS-7976) v: 1.0
serial: <superuser required> UEFI: American Megatrends v: 1.F0
date: 09/26/2016
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 32 GiB available: 31.24 GiB used: 12.11 GiB (38.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Core i7-6700 bits: 64 type: MT MCP arch: Skylake-S
gen: core 6 level: v3 note: check built: 2015 process: Intel 14nm family: 6
model-id: 0x5E (94) stepping: 3 microcode: 0xF0
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 800 min/max: 800/4000 scaling: driver: intel_pstate
governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
8: 800 bogomips: 54417
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
dtherm dts ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor
movbe mpx msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp
rep_good sdbg sep smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp
syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi
vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Vulnerabilities:
Type: gather_data_sampling status: Vulnerable: No microcode
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort mitigation: TSX disabled
Graphics:
Device-1: Intel HD Graphics 530 vendor: Micro-Star MSI driver: i915 v: kernel
arch: Gen-9 process: Intel 14n built: 2015-16 ports: active: none empty: DP-1,
HDMI-A-1, HDMI-A-2, HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:1912
class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting alternate: fbdev,vesa dri: iris gpu: i915
display-ID: :20.0 screens: 1
Screen-1: 0 s-res: 2048x1018 s-dpi: 96 s-size: 541x269mm (21.30x10.59")
s-diag: 604mm (23.79")
Monitor-1: DUMMY0 res: 2048x1018 hz: 60 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
device: 1 drv: swrast surfaceless: drv: iris x11: drv: swrast
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: mesa v: 23.1.9-manjaro1.1
glx-v: 1.4 direct-render: yes renderer: llvmpipe (LLVM 16.0.6 256 bits)
device-ID: ffffffff:ffffffff memory: 30.5 GiB unified: yes
Audio:
Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170
class-ID: 0403
API: ALSA v: k6.5.3-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.81 status: active (process) tools: pw-cli
Server-3: PulseAudio v: 16.1 status: off with: pulseaudio-alsa type: plugin
tools: pacat,pactl,pavucontrol
Network:
Device-1: Qualcomm Atheros Killer E2400 Gigabit Ethernet
vendor: Micro-Star MSI driver: alx v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 1969:e0a1 class-ID: 0200
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: br-0bfc52e7b7d8 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> virtual: proto kernel_ll scope: link
IF-ID-2: br-0eecd4510b18 state: up speed: 10000 Mbps duplex: unknown
mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> virtual: proto kernel_ll scope: link
IF-ID-3: docker0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-4: veth024e77b state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-5: veth2804395 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-6: veth3f0b2e8 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-7: veth4e4ff0f state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-8: veth620fea7 state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-9: veth95500cc state: up speed: 10000 Mbps duplex: full mac: <filter>
IF-ID-10: vetha8a5b5c state: up speed: 10000 Mbps duplex: full
mac: <filter>
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 3.76 TiB used: 824.08 GiB (21.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZEX-08WN4A0
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: 1A02 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 840 PRO Series
size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 6B0Q scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD10EZRX-00L4HB0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 1A01 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST2000DM008-2FR102
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: 0001 scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 118.95 GiB size: 116.52 GiB (97.96%)
used: 20.28 GiB (17.4%) fs: ext4 dev: /dev/sdb2 maj-min: 8:18 label: N/A
uuid: 29649f05-10b5-4df2-9d3a-46c207e3f665
ID-2: /amp_saves raw-size: 931.51 GiB size: 931.51 GiB (100.00%)
used: 187.72 GiB (20.2%) fs: ntfs dev: /dev/sdc3 maj-min: 8:35
label: AMP saves uuid: 64A84D6EA84D3FB2
ID-3: /backup raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 615.71 GiB (33.0%) fs: ntfs dev: /dev/sdd2 maj-min: 8:50 label: Backup
uuid: 14C6922BC6920CDC
ID-4: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/sdb1 maj-min: 8:17 label: N/A
uuid: 4A5E-CA9F
ID-5: /docker_data raw-size: 843.33 GiB size: 829.52 GiB (98.36%)
used: 382.9 MiB (0.0%) fs: ext4 dev: /dev/sda3 maj-min: 8:3
label: docker_data uuid: e31e2c90-8760-46ab-bd82-c125532fb276
Swap:
Alert: No swap data was found.
Unmounted:
ID-1: /dev/sdd1 maj-min: 8:49 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-7:5 info: Corsair K63 Wireless USB Receiver type: mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 500mA chip-ID: 1b1c:1b8f class-ID: 0300
serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 10 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 24.0 C pch: 32.5 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 404 Uptime: 33d 23h 13m wakeups: 0 Init: systemd v: 254
default: system-update tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: pm: pacman pkgs: 1069 libs: 317 tools: pamac pm: flatpak pkgs: 0
Shell: Bash v: 5.1.16 running-in: xfce4-terminal inxi: 3.3.30
When I run mhwd it can’t find a driver
$ sudo mhwd -a pci free 0200
Warning: No config found for device: 0000:02:00.0 (0200:1969:e0a1) Network controller Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller
$ sudo mhwd -a pci nonfree 0200
Warning: No config found for device: 0000:02:00.0 (0200:1969:e0a1) Network controller Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller
Can someone help me understand how / what I have to do to install it?
According to linux hardware org it should be compattible?
