Mauszeiger ausblenden

Hallo Zusammen,

mit meinem aktuellen Gerät bin ich auf jeden Fall bereits arbeitsfähig.
Ich werde für meine Nebenstellen (so weit ich diese nicht hin bekomme) jeweils ein eigenes Thema eröffnen.

System:
  Kernel: 6.12.48-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
    clocksource: tsc avail: acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.12-x86_64
    root=UUID=42e9325b-30e0-4e85-935b-567bdc91070f rw quiet splash apparmor=1
    security=apparmor resume=UUID=548284c1-8490-4d9d-abfa-e43e96a70ddd
    udev.log_priority=3
  Desktop: GNOME v: 48.5 tk: GTK v: 3.24.50 wm: gnome-shell
    tools: gsd-screensaver-proxy dm: GDM v: 48.0 Distro: Manjaro
    base: Arch Linux
Machine:
  Type: Convertible System: LENOVO product: 20LES4P71F v: ThinkPad X1 Yoga 3rd
    serial: <superuser required> Chassis: type: 31 serial: <superuser required>
  Mobo: LENOVO model: 20LES4P71F v: SDK0J40697 WIN
    serial: <superuser required> part-nu: LENOVO_MT_20LE_BU_Think_FM_ThinkPad
    X1 Yoga 3rd uuid: <superuser required> UEFI: LENOVO v: N25ET68W (1.54 )
    date: 08/22/2024
Battery:
  ID-1: BAT0 charge: 31.2 Wh (79.5%) condition: 39.3/54.1 Wh (72.7%)
    volts: 16.43 min: 15.36 model: Celxpert 01AV475 type: Li-poly
    serial: <filter> charging: status: not charging control: start: 75%
    end: 80% cycles: 736
Memory:
  System RAM: total: 8 GiB available: 7.51 GiB used: 2.93 GiB (39.0%)
  Message: For most reliable report, use superuser + dmidecode.
  Array-1: capacity: 8 GiB slots: 2 modules: 2 EC: None
    max-module-size: 4 GiB note: est.
  Device-1: ChannelA-DIMM0 type: LPDDR3 detail: synchronous unbuffered
    (unregistered) size: 4 GiB speed: 2133 MT/s volts: curr: 1 width (bits):
    data: 64 total: 64 manufacturer: SK Hynix part-no: H9CCNNNBJTALAR-NVD
    serial: N/A
  Device-2: ChannelB-DIMM0 type: LPDDR3 detail: synchronous unbuffered
    (unregistered) size: 4 GiB speed: 2133 MT/s volts: curr: 1 width (bits):
    data: 64 total: 64 manufacturer: SK Hynix part-no: H9CCNNNBJTALAR-NVD
    serial: N/A
PCI Slots:
  Permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: Intel Core i5-8350U bits: 64 type: MT MCP arch: Coffee Lake
    gen: core 8 level: v3 note: check built: 2017 process: Intel 14nm family: 6
    model-id: 0x8E (142) stepping: 0xA (10) microcode: 0xF6
  Topology: cpus: 1x dies: 1 clusters: 4 cores: 4 threads: 8 tpc: 2
    smt: enabled cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB
    desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 400 min/max: 400/3600 scaling: driver: intel_pstate
    governor: powersave cores: 1: 400 2: 400 3: 400 4: 400 5: 400 6: 400 7: 400
    8: 400 bogomips: 30409
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_perfmon art avx avx2 bmi1 bmi2 bts clflush
    clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
    dtherm dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu
    fsgsbase fxsr ht hwp hwp_act_window hwp_epp hwp_notify ibpb ibrs ida
    intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe mpx msr
    mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge
    pln pni popcnt pse pse36 pti pts rdrand rdseed rdtscp rep_good sdbg sep
    sgx smap smep smx ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm
    tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid x2apic
    xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: KVM: Split huge pages
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
    vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional;
    RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsa status: Not affected
  Type: tsx_async_abort mitigation: TSX disabled
  Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Lenovo driver: i915 v: kernel
    arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1
    empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:5917
    class-ID: 0300
  Device-2: Chicony Integrated IR Camera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:2 chip-ID: 04f2:b605
    class-ID: 0e02 serial: <filter>
  Device-3: Chicony Integrated Camera (1280x720@30) driver: uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:4
    chip-ID: 04f2:b604 class-ID: 0e02 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.18 with: Xwayland v: 24.1.8
    compositor: gnome-shell driver: gpu: i915 display-ID: 0
  Monitor-1: eDP-1 model: ChiMei InnoLux 0x14e1 built: 2017 res: 1920x1080
    dpi: 158 gamma: 1.2 chroma: red: x: 0.639 y: 0.329 green: x: 0.298 y: 0.600
    blue: x: 0.149 y: 0.059 white: x: 0.314 y: 0.329
    size: 309x173mm (12.17x6.81") diag: 354mm (13.9") ratio: 16:9
    modes: 1920x1080
  API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris
    device: 1 drv: swrast gbm: drv: iris surfaceless: drv: iris wayland:
    drv: iris x11: drv: iris
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.2.3-arch1.2
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics 620 (KBL
    GT2) device-ID: 8086:5917 memory: 7.33 GiB unified: yes display-ID: :0.0
  Info: Tools: api: eglinfo,glxinfo x11: xprop
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
    driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3
    chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.12.48-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.4.8 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-LM vendor: Lenovo driver: e1000e v: kernel
    port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15d7 class-ID: 0200
  IF: enp0s31f6 state: down mac: <filter>
  Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:24fd
    class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:3 chip-ID: 8087:0a2b
    class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 238.47 GiB used: 43.52 GiB (18.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: MZVLB256HBHQ-000L7 size: 238.47 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 5M2QEXH7 temp: 34.9 C scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 229.38 GiB size: 224.72 GiB (97.97%)
    used: 43.52 GiB (19.4%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
    label: N/A uuid: 42e9325b-30e0-4e85-935b-567bdc91070f
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 320 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
    uuid: D607-BC92
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: partition size: 8.8 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p3 maj-min: 259:3 label: swap
    uuid: 548284c1-8490-4d9d-abfa-e43e96a70ddd
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 1-5:2 info: Chicony Integrated IR Camera type: video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b605 class-ID: 0e02
    serial: <filter>
  Device-2: 1-7:3 info: Intel Bluetooth wireless interface type: bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
    mode: 1.1 power: 100mA chip-ID: 8087:0a2b class-ID: e001
  Device-3: 1-8:4 info: Chicony Integrated Camera (1280x720@30) type: video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 500mA chip-ID: 04f2:b604 class-ID: 0e02
    serial: <filter>
  Device-4: 1-9:5 info: Synaptics Metallica MIS Touch Fingerprint Reader
    type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 06cb:009a class-ID: ff00 serial: <filter>
  Device-5: 1-10:6 info: Wacom Pen and multitouch sensor type: HID
    driver: usbhid,wacom interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 400mA chip-ID: 056a:5148 class-ID: 0300
  Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Device-1: 2-3:2 info: Realtek USB3.0-CRW type: mass storage
    driver: usb-storage interfaces: 1 rev: 3.0 speed: 5 Gb/s (596.0 MiB/s)
    lanes: 1 mode: 3.2 gen-1x1 power: 800mA chip-ID: 0bda:0328 class-ID: 0806
    serial: <filter>
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 48.0 C pch: 46.5 C mobo: N/A
  Fan Speeds (rpm): fan-1: 0
Repos:
  Packages: 1498 pm: pacman pkgs: 1491 libs: 373 tools: gnome-software,pamac
    pm: flatpak pkgs: 7
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://ftp.free.org/mirrors/repo.manjaro.org/repos/stable/$repo/$arch
    2: https://mirror.raiolanetworks.com/manjaro/stable/$repo/$arch
    3: https://mirror.koddos.net/manjaro/stable/$repo/$arch
Processes:
  CPU top: 5 of 300
  1: cpu: 100% command: ps pid: 4950 mem: 4.24 MiB (0.0%)
  2: cpu: 14.5% command: kgx pid: 4834 mem: 195.5 MiB (2.5%)
  3: cpu: 9.0% command: zsh pid: 4842 mem: 10.5 MiB (0.1%)
  4: cpu: 3.6% command: vivaldi-bin pid: 3252 mem: 272.9 MiB (3.5%)
  5: cpu: 3.4% command: gnome-shell pid: 961 mem: 313.8 MiB (4.0%)
  Memory top: 5 of 300
  1: mem: 341.4 MiB (4.4%) command: exe pid: 2356 cpu: 1.7%
  2: mem: 337.2 MiB (4.3%) command: vivaldi-bin pid: 3138 cpu: 1.8%
  3: mem: 313.8 MiB (4.0%) command: gnome-shell pid: 961 cpu: 3.4%
  4: mem: 283.0 MiB (3.6%) command: ferdium pid: 2075 cpu: 0.7%
  5: mem: 272.9 MiB (3.5%) command: vivaldi-bin pid: 3252 cpu: 3.6%
Info:
  Processes: 300 Power: uptime: 20m states: freeze,mem,disk suspend: s2idle
    avail: deep wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 2.99 GiB services: gsd-power,
    power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
    tool: systemctl
  Compilers: clang: 20.1.8 gcc: 15.2.1 Shell: Zsh v: 5.9 running-in: kgx
    inxi: 3.3.39

Mein aktuelles Problem: Ich kann den Mauszeiger nicht verschwinden lassen (wie bei KDE mit Wayland).

Die Anwendung unclutter funktioniert bei wayland nicht; wollte aber bei wayland bleiben.
Bei den Erweiterungen finde ich auch das hide-Cursor nicht; bei pamac GUI habe ich auch nichts dazu gefunden.

Da stehe ich auf dem Schlauch.
Mein Ziel: Der Mauszeiger soll nach 5 Sekunden oder so ausgeblendet werden, im Tablet-Modus und im Tastatur-Modus.

Für unter Wayland session soll es das da geben - eine Erweiterung:

Hide Cursor - GNOME Shell Extensions

Im Text dort ist auch erwähnt, mit was/wie es unter X11 funktionieren sollte.

For use on Wayland, since unclutter, unclutter-xfixes and xbanish only work on X11

Ich kann das nicht (oder nicht ohne größeren Aufwand) probieren, weil Gnome in meiner VM “nur” unter X11 läuft und Wayland gar nicht aktivierbar ist.

Das hat jetzt funktioniert.
:face_with_monocle:
:red_question_mark:

Führt bei mir jedoch zu völligen Verwirrtheit.
Habe nach dem Umstieg mir angewöhnen müssen die Software und die Anwendungen immer vom pamac GUI oder über die Konsole zu installieren (oder builden) alles immer mit Eingabe vom Passwort…
… jetzt drücke ich auf ein Dialogfeld und das Ding läuft.

Da kann ich lange auf den üblichen Seiten suchen.

Vielen Dank.

PS.: @Nachlese das mit dem Bildschirm drehen ist nur Performance, funktioniert aber plötzlich. Der einzigste Unterschied ist dass ich dconf-editor installiert hatte, aber ohne was einzustellen. Ist wohl eher Hardware - Wackelkontakt, da bei KDE der Haken zum automatisch drehen auch nicht da war (Sichtbar hier auf irgendwelchen Screenshots)

Es gibt da eine (Gnome) App für - gnome-tweaks oder so heißt die.
Über die - wenn man die installiert hat - kann man die Erweiterungen auch installieren.
Nicht nur über den Browser Link so wie hier.

Man muß dann nur aufpassen, was man via Paketmanager (pamac oder pacman) installiert hat
und was man über diese App installiert hat.

sonst kommt man auch schnell in des Teufels Küche … :wink:

… Gnome ist … eigenartig und recht unfreundlich und unintuitiv, sobald man mehr will als was per default dabei ist.
Einer der Hauptgründe, weshalb ich es nicht nutze.
Ständig ist irgendwas, ständig hört irgendwas auf zu funktionieren, was eben noch ging.
Und die Lösung dafür kostet jedesmal Zeit und Nerven - oder es gibt erstmal für längere Zeit gar keine.

Deshalb bleibe ich bei Xfce4 - und bin glücklich damit. :grin:

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.