I want to play Game that I started playing after a few of playing due being stuck in the Game. I merely desired to play a game before going to sleep. And this is the Errors I’m getting.
’ Running Steam on manjarolinux 20.2 64-bit
Thanks for any Help with this. Should I uninstall both Manjaro and Native? Then reinstall one of them or both?
Sorry forgot how to post Code.
omano
31 December 2020 13:03
2
How do you start Steam? What happens if you try to start steam from a terminal?
steam
Also maybe always give your system information it can always have good info for later
inxi -Fazy
While it was working fine until I did the updates and reboot. I tried uninstalling, rebooting, and reinstalling, and rebooted again.
I even turn off the computer, went to bed and trued again. This is what I got,
steam
Running Steam on manjarolinux 20.2 64-bit
No matter if I steam. or, STEAM_RUNTIME=1 steam , either 1 or 2.
this what I got when I Typed: inxi -Fazy
System:
Kernel: 5.4.85-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64
root=UUID=1a0a0cfd-5864-4f2c-a234-2c68123345f3 rw quiet apparmor=1
security=apparmor resume=UUID=71d36dd7-2f3d-4818-b32c-2b6569961193
udev.log_priority=3
Desktop: Xfce 4.14.3 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: ASRock model: Z87 Pro3 serial: <filter>
BIOS: American Megatrends v: P2.90 date: 07/11/2014
CPU:
Info: Quad Core model: Intel Core i5-4670 bits: 64 type: MCP arch: Haswell
family: 6 model-id: 3C (60) stepping: 3 microcode: 28 L2 cache: 6 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
bogomips: 27200
Speed: 2140 MHz min/max: 800/3800 MHz Core speeds (MHz): 1: 2140 2: 2308
3: 2006 4: 3116
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GK104 [GeForce GTX 760] vendor: eVga.com. driver: nvidia
v: 450.80.02 alternate: nouveau,nvidia_drm bus ID: 01:00.0
chip ID: 10de:1187
Display: x11 server: X.Org 1.20.10 driver: nvidia unloaded: nouveau
display ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1600 s-dpi: 96 s-size: 677x423mm (26.7x16.7")
s-diag: 798mm (31.4")
Monitor-1: DVI-I-1 res: 2560x1600 hz: 60 dpi: 101
size: 641x401mm (25.2x15.8") diag: 756mm (29.8")
OpenGL: renderer: GeForce GTX 760/PCIe/SSE2 v: 4.6.0 NVIDIA 450.80.02
direct render: Yes
Audio:
Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: ASRock
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:8c20
Device-2: NVIDIA GK104 HDMI Audio vendor: eVga.com. driver: snd_hda_intel
v: kernel bus ID: 01:00.1 chip ID: 10de:0e0a
Sound Server: ALSA v: k5.4.85-1-MANJARO
Network:
Device-1: Intel Ethernet I217-V vendor: ASRock driver: e1000e v: 3.2.6-k
port: f040 bus ID: 00:19.0 chip ID: 8086:153b
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 4.48 TiB used: 679.25 GiB (14.8%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT960M500SSD1
size: 894.25 GiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: MU02
ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT960M500SSD1
size: 894.25 GiB block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: MU02
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Seagate model: Expansion Desk
size: 2.73 TiB block size: physical: 4096 B logical: 4096 B serial: <filter>
rev: 0711
Partition:
ID-1: / raw size: 55.88 GiB size: 54.75 GiB (97.98%) used: 32.78 GiB (59.9%)
fs: ext4 dev: /dev/sdb1 maj-min: 8:17
ID-2: /home raw size: 836.47 GiB size: 823.22 GiB (98.42%)
used: 646.47 GiB (78.5%) fs: ext4 dev: /dev/sdb6 maj-min: 8:22
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 1.91 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sdb5 maj-min: 8:21
Sensors:
System Temperatures: cpu: 45.0 C mobo: N/A gpu: nvidia temp: 74 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 42%
Info:
Processes: 189 Uptime: 23m wakeups: 0 Memory: 15.57 GiB
used: 1.65 GiB (10.6%) Init: systemd v: 247 Compilers: gcc: 10.2.0
clang: 11.0.0 Packages: pacman: 1774 lib: 522 flatpak: 0 Shell: Bash
v: 5.1.0 running in: xfce4-terminal inxi: 3.2.01
How are User supposed to post Error Properly?
BTW I did notice I’m using the Steam Pubic Beta. Anyway to force the Steam Client to change back to Standard?
According to this Arch Wiki page https://wiki.archlinux.org/index.php/Steam/Troubleshooting#Steam:_An_X_Error_occurred
Your nvidia package has to match the version of: lib32-nvidia-utils.
In my case I ran pacman -Qs nvidia to get these versions (I’m currently using the 5.4 Kernel like you):
local/lib32-nvidia-utils 455.45.01-3
...
local/linux54-nvidia 455.45.01-6 (linux54-extramodules)
If the versions don’t match up, just run sudo pacman -S linux54-nvidia. This should replace the old 440 driver package and make Steam work again.
I wish you a happy new year, I hope this helped. It certainly fixed the Steam issue for me
2 Likes
Thanks I just chroot into my system and use pacman to correct my mistake.
I’ll let know if it worked or not.
Thanks it worked. Now to to properly set up the 5.10 kernel…
Steam now runs. before I rebooted and after I installed and booted from the 5.10 Kernel.
Thanks again for your help.
system
15 January 2021 18:11
9
This topic was automatically closed 15 days after the last reply. New replies are no longer allowed.
