Manjaro kde boot up speed get slow in the last 2 weeks

Support
1

Hello
in the last 2 weeks i have a boot up speed ,it’s slow ,when i install Manjaro it was really good in boot up speed but i have this problem now
This is the systemd-analyze output :

Startup finished in 7.787s (firmware) + 6.250s (loader) + 7.475s (kernel) + 29.879s (userspace) = 51.393s 
graphical.target reached after 29.875s in userspace

and these are my laptop info :

H/W path       Device      Class          Description
=====================================================
                           system         HP Laptop 17-bs0xx 
/0                         bus            833D
/0/0                       memory         128KiB BIOS
/0/4                       processor      Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz
/0/4/5                     memory         128KiB L1 cache
/0/4/6                     memory         512KiB L2 cache
/0/4/7                     memory         3MiB L3 cache
/0/26                      memory         4GiB System Memory
/0/26/0                    memory         SODIMM DDR Synchronous [empty]
/0/26/1                    memory         4GiB SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2133 MHz (0.5 ns)
/0/100                     bridge         Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
/0/100/2                   display        Skylake GT2 [HD Graphics 520]
/0/100/4                   generic        Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
/0/100/14                  bus            Sunrise Point-LP USB 3.0 xHCI Controller
/0/100/14/0    usb1        bus            xHCI Host Controller
/0/100/14/0/5              communication  802.11n WLAN Adapter
/0/100/14/0/7              multimedia     HP TrueVision HD Camera
/0/100/14/1    usb2        bus            xHCI Host Controller
/0/100/14.2                generic        Sunrise Point-LP Thermal subsystem
/0/100/16                  communication  Sunrise Point-LP CSME HECI #1
/0/100/17      scsi0       storage        Sunrise Point-LP SATA Controller [AHCI mode]
/0/100/17/0    /dev/sda    disk           1TB WDC WD10JPVX-60J
/0/100/17/0/1  /dev/sda1   volume         259MiB Windows FAT volume
/0/100/17/0/2  /dev/sda2   volume         15MiB reserved partition
/0/100/17/0/3  /dev/sda3   volume         661GiB Windows NTFS volume
/0/100/17/0/4  /dev/sda4   volume         58GiB EFI partition
/0/100/17/0/5  /dev/sda5   volume         979MiB Windows NTFS volume
/0/100/17/0/6  /dev/sda6   volume         14GiB Windows NTFS volume
/0/100/17/0/7  /dev/sda7   volume         97GiB EXT4 volume
/0/100/17/0/8  /dev/sda8   volume         5999MiB Linux swap volume
/0/100/17/1    /dev/cdrom  disk           DVDRW  DA8AESH
/0/100/1c                  bridge         Sunrise Point-LP PCI Express Root Port #1
/0/100/1c/0                display        Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile]
/0/100/1c.4                bridge         Sunrise Point-LP PCI Express Root Port #5
/0/100/1c.4/0  eno1        network        RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/1c.5                bridge         Sunrise Point-LP PCI Express Root Port #6
/0/100/1c.5/0  wlp3s0      network        RTL8723DE 802.11b/g/n PCIe Adapter
/0/100/1f                  bridge         Sunrise Point-LP LPC Controller
/0/100/1f.2                memory         Memory controller
/0/100/1f.3                multimedia     Sunrise Point-LP HD Audio
/0/100/1f.4                bus            Sunrise Point-LP SMBus
/0/1                       system         Motherboard registers
/0/2                       system         Motherboard registers
/0/3                       system         Motherboard registers
/0/5                       system         AT Real-Time Clock
/0/6                       generic        PnP device INT3f0d
/0/7                       generic        PnP device HPQ8001
/0/8                       generic        PnP device ETD0722
/0/9                       system         Motherboard registers
/0/a                       system         Motherboard registers
/1                         power          JC04041
/2                         power          OEM Define 5

So any one who can help me for fix this problem.

2

That’s good time if you boot from hdd drive. See systemd-analyze blame to see which services takes most time and disable if you don’t need something – forum search will be helpful with it.

3

Yes i have HDD and this is the systemd-analyze blame output :

11.867s systemd-swap.service
 9.968s NetworkManager-wait-online.service
 4.494s dev-sda7.device
 3.195s cups.service
 3.121s avahi-daemon.service
 3.115s NetworkManager.service
 2.897s systemd-logind.service
 2.160s bluetooth.service
 2.160s udisks2.service
 2.107s tlp.service
 1.624s apparmor.service
 1.600s systemd-fsck@dev-disk-by\x2duuid-3286\x2d4D0D.service
 1.308s polkit.service
 1.075s systemd-tmpfiles-setup-dev.service
  892ms systemd-udevd.service
  760ms wpa_supplicant.service
  681ms user@1000.service
  673ms systemd-modules-load.service
  600ms snapd.service
  578ms lvm2-monitor.service
  443ms upower.service
  407ms modprobe@drm.service
  381ms systemd-random-seed.service
  372ms systemd-tmpfiles-setup.service
  324ms dev-disk-by\x2duuid-6bd5ee6f\x2d638c\x2d4fde\x2da83c\x2d90d6088697dc.swap
  289ms modprobe@fuse.service
  255ms systemd-binfmt.service
  254ms boot-efi.mount
  240ms alsa-restore.service
4

So when i defrag my Manjaro partition this is the systemd-analyze output :

Startup finished in 6.441s (firmware) + 3.296s (loader) + 7.297s (kernel) + 29.155s (userspace) = 46.190s 
graphical.target reached after 28.058s in userspace
5

Only one of the two memory channels is assigned.

6

Yeah i now but i want to know why 2 weeks ago the Manjaro kde boot up time is good and now it’s not

7

How old is the Manjaro installation ?

8

About 3 months