The Manjaro grub theme stopped working for me after todays updates.
Welcome to the Manjaro community
As a new or infrequent forum user, please take some time to familiarise yourself with Forum requirements, and the many ways to use the forum to your benefit.
To that end, links are provided (below) - Please use them.
Be prepared to provide outputs from various commands when asked. Itâs equally important to provide as much actionable information as possible in your first post, rather than simply indicating there is a problem.
Waiting for someone to blindly ask questions is also counter-productive â typically, nobody has a
at their disposal â Instead, please help others to make informed suggestions, based on information you provide.
The Update Announcements contain important information and a Known Issues and Solutions section that should generally be checked before posting a request for support.
While information from *-fetch type apps might be fine for someone wishing to buy your computer, for Support purposes itâs better to ask your system directly; ![]()
Output of the inxi command (with appropriate parameters, and formatted according to forum guidelines) will generate information useful for those wishing to help:
inxi --filter --verbosity=8
or the short form (preferred):
inxi -zv8
- inxi man pages (Arch Manual)
You havenât mentioned what actions, if any, you have taken so far after you read through this monthâs [Unstable Update] October 2026 announcement.
There are quite a few posts regarding the latest grub updates in this monthâs announcement.
Also:
Apologies, I had forgotten proper etiquette. I will do my due diligence and respond properly.
After digging though all the content you all suggested, I tried the pertinent fixes for my computer but didnât find a solution that helped.
I added this line to grub since my system uses MBR:
GRUB_DISABLE_UEFI_FIRMWARE=true
I tried commenting out this line in grub because it doesât appear to be needed for btrfs anymore:
GRUB_SAVEDEFAULT=true
here is the output of inxi:
⯠inxi --filter --verbosity=8
System:
Kernel: 7.3.0-rc7-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-7.3-x86_64
root=UUID=aa338583-810e-4542-a4d0-95030fcebef5 rw rootflags=subvol=@
quiet loglevel=3 rd.udev.log_level=3
Desktop: KDE Plasma v: 6.7.5 tk: Qt v: N/A info: frameworks v: 6.31.0
wm: kwin_wayland vt: 2 dm: N/A Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: 970DE3/U3S3 serial: <superuser required>
uuid: <superuser required> Firmware: BIOS vendor: American Megatrends
v: P1.70 date: 04/08/2013
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 16 GiB available: 15.59 GiB used: 3.49 GiB (22.4%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 32 GiB note: est. slots: 4 modules: 2 EC: None
max-module-size: 8 GiB note: est.
Device-1: DIMM0 type: no module installed
Device-2: DIMM1 type: no module installed
Device-3: DIMM2 type: N/A size: 8 GiB speed: 800 MT/s volts: N/A
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMD16GX3M2A1866C9 serial: N/A
Device-4: DIMM3 type: N/A size: 8 GiB speed: 800 MT/s volts: N/A
width (bits): data: 64 total: 64 manufacturer: Corsair
part-no: CMD16GX3M2A1866C9 serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD FX-8150 bits: 64 type: MCP arch: Bulldozer level: v2
built: 2011 process: GF 32nm family: 0x15 (21) model-id: 1 stepping: 2
microcode: 0x600063E
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 smt: <unsupported> cache:
L1: 384 KiB desc: d-8x16 KiB; i-4x64 KiB L2: 8 MiB desc: 4x2 MiB L3: 8 MiB
desc: 1x8 MiB
Speed (MHz): avg: 1400 min/max: 1400/3600 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 1400 2: 1400 3: 1400
4: 1400 5: 1400 6: 1400 7: 1400 8: 1400 bogomips: 57715
Flags: 3dnowprefetch abm aes aperfmperf apic arat avx clflush cmov
cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists
extapic extd_apicid flushbyasid fma4 fpu fxsr fxsr_opt ht hw_pstate ibpb
ibs lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor msr mtrr
nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat pausefilter
pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni popcnt pse
pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3
svm svm_lock syscall topoext tsc tsc_scale vmcb_clean vme vmmcall wdt xop
xsave
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: ghostwrite status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; STIBP:
disabled; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape status: Not affected
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Lexa PRO [Radeon
540/540X/550/550X / RX 540X/550/550X] driver: amdgpu v: kernel arch: GCN-4
code: Arctic Islands process: GF 14nm built: 2016-20 pcie: gen: 2
speed: 5 GT/s lanes: 8 link-max: gen: 3 speed: 8 GT/s ports: active: DP-1
empty: DVI-D-1,HDMI-A-1 bus-ID: 01:00.0 chip-ID: 1002:699f class-ID: 0300
temp: 43.0 C
Display: wayland server: X.org v: 1.21.1.25 with: Xwayland v: 24.1.14
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: DP-1 model: Acer KA272 serial: <filter> built: 2020 res:
mode: 1920x1080 hz: 75 scale: 100% (1) dpi: 82 gamma: 1.2 chroma: red:
x: 0.639 y: 0.337 green: x: 0.314 y: 0.624 blue: x: 0.149 y: 0.055 white:
x: 0.314 y: 0.329 size: 598x336mm (23.54x13.23") diag: 686mm (27")
ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024, 1440x900, 1280x960,
1280x800, 1152x864, 1280x720, 1024x768, 832x624, 800x600, 720x576,
720x480, 640x480, 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: radeonsi surfaceless: drv: radeonsi wayland:
drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 vendor: amd mesa v: 26.2.4-arch1.1 glx-v: 1.4
direct-render: yes renderer: AMD Radeon RX 550 / 550 Series (radeonsi
polaris12 ACO DRM 3.64 7.3.0-rc7-1-MANJARO) device-ID: 1002:699f
memory: 3.91 GiB unified: no display-ID: :0.0
API: Vulkan v: 1.4.363 layers: 9 device: 0 type: discrete-gpu name: AMD
Radeon RX 550 / 550 Series (RADV POLARIS12) driver: mesa radv
v: 26.2.4-arch1.1 device-ID: 1002:699f surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] SBx00 Azalia vendor: ASRock
driver: snd_hda_intel v: kernel bus-ID: 00:14.2 chip-ID: 1002:4383
class-ID: 0403
Device-2: Advanced Micro Devices [AMD/ATI] Baffin HDMI/DP Audio [Radeon
RX 550 640SP / 560/560X] driver: snd_hda_intel v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 8 link-max: gen: 3 speed: 8 GT/s bus-ID: 01:00.1
chip-ID: 1002:aae0 class-ID: 0403
Device-3: Jieli USB Composite Device
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 2-2:3 chip-ID: 4c4a:4155 class-ID: 0300
API: ALSA v: k7.3.0-rc7-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.6.9 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASRock driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: e800 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp5s0 state: down mac: <filter>
Device-2: MediaTek Wireless_Device driver: mt7921u type: USB rev: 3.2
speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 11-2:3 chip-ID: 0e8d:7961
class-ID: 0000 serial: <filter>
IF: wlan0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
Info: services: iwd, NetworkManager, systemd-timesyncd
WAN IP: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 6-3:3 chip-ID: 0bda:8771
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 1.94 TiB used: 229.52 GiB (11.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: M4-CT128M4SSD2
size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 040H scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DM006-2DM164
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: CC26 scheme: MBR
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 119.24 GiB size: 119.24 GiB (100.00%)
used: 28.83 GiB (24.2%) fs: btrfs dev: /dev/sda1 maj-min: 8:1 label: Manjaro
uuid: aa338583-810e-4542-a4d0-95030fcebef5
ID-2: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 200.69 GiB (10.8%) fs: btrfs dev: /dev/sdb1 maj-min: 8:17 label: Home
uuid: d37ba7c9-3171-4e16-aee5-6c4ddfc3b325
ID-3: /var/cache raw-size: 119.24 GiB size: 119.24 GiB (100.00%)
used: 28.83 GiB (24.2%) fs: btrfs dev: /dev/sda1 maj-min: 8:1 label: Manjaro
uuid: aa338583-810e-4542-a4d0-95030fcebef5
ID-4: /var/log raw-size: 119.24 GiB size: 119.24 GiB (100.00%)
used: 28.83 GiB (24.2%) fs: btrfs dev: /dev/sda1 maj-min: 8:1 label: Manjaro
uuid: aa338583-810e-4542-a4d0-95030fcebef5
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: full speed or root hub ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 2-0:1 info: full speed or root hub ports: 3 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
class-ID: 0900
Device-1: 2-1:2 info: Cyber Power System CP1500 AVR UPS type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1
speed: 1.5 Mb/s (183 KiB/s) lanes: 1 mode: 1.0 power: 50mA
chip-ID: 0764:0501 class-ID: 0300
Device-2: 2-2:3 info: Jieli USB Composite Device type: audio,HID
driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 4c4a:4155 class-ID: 0300
Hub-3: 3-0:1 info: full speed or root hub ports: 6 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-4:2 info: Genesys Logic Multislot Card Reader/Writer
type: mass storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 05e3:0716 class-ID: 0806 serial: <filter>
Hub-4: 4-0:1 info: full speed or root hub ports: 3 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
class-ID: 0900
Hub-5: 5-0:1 info: full speed or root hub ports: 3 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
class-ID: 0900
Hub-6: 6-0:1 info: full speed or root hub ports: 3 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
class-ID: 0900
Device-1: 6-3:3 info: Realtek Bluetooth Radio type: bluetooth
driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 power: 500mA chip-ID: 0bda:8771 class-ID: e001 serial: <filter>
Hub-7: 7-0:1 info: full speed or root hub ports: 2 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 1d6b:0001
class-ID: 0900
Hub-8: 8-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-9: 9-0:1 info: super-speed hub ports: 2 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-10: 10-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-11: 10-1:2 info: Genesys Logic Hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0610 class-ID: 0900
Hub-12: 11-0:1 info: super-speed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-13: 11-1:2 info: Genesys Logic Hub ports: 4 rev: 3.2
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 05e3:0626
class-ID: 0900
Device-1: 11-2:3 info: MediaTek Wireless_Device type: Network
driver: mt7921u interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s) lanes: 1
mode: 3.2 gen-1x1 power: 160mA chip-ID: 0e8d:7961 class-ID: 0000
serial: <filter>
Sensors:
System Temperatures: cpu: 40.5 C mobo: 37.0 C gpu: amdgpu temp: 43.0 C
Fan Speeds (rpm): fan-1: 1124 fan-2: 980 fan-3: 1201
Power: 12v: N/A 5v: N/A 3.3v: 3.33 vbat: 3.38 gpu: amdgpu watts: 5.26
Repos:
Packages: 1551 pm: pacman pkgs: 1546 libs: 403 tools: pamac pm: flatpak
pkgs: 5
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://manjaro.mirror.garr.it/manjaro/unstable/$repo/$arch
2: https://southfront.mm.fcix.net/manjaro/unstable/$repo/$arch
3: https://mirror.datacenter.by/pub/mirrors/manjaro/unstable/$repo/$arch
4: https://mirrors.manjaro.org/repo/unstable/$repo/$arch
5: https://mirror.it4i.cz/manjaro/unstable/$repo/$arch
6: https://mirror.informatik.tu-freiberg.de/manjaro/unstable/$repo/$arch
7: https://muug.ca/mirror/manjaro/unstable/$repo/$arch
8: https://nocix.mm.fcix.net/manjaro/unstable/$repo/$arch
9: https://mirrors.atlas.net.co/manjaro/unstable/$repo/$arch
10: https://ftp.caliu.cat/manjaro/unstable/$repo/$arch
11: https://manjaro.mirror-services.net/pub/unstable/$repo/$arch
12: https://mirror.dimensiondata.com/mirrors/manjaro.org/unstable/$repo/$arch
13: https://mirror.math.princeton.edu/pub/manjaro/unstable/$repo/$arch
14: https://cofractal-ewr.mm.fcix.net/manjaro/unstable/$repo/$arch
15: https://mirror.xenyth.net/manjaro/unstable/$repo/$arch
16: https://mirrors.zju.edu.cn/manjaro/unstable/$repo/$arch
17: https://mirror.xeonbd.com/manjaro/unstable/$repo/$arch
18: https://mirror.bakertelekom.fr/manjaro/unstable/$repo/$arch
19: https://mirror.dkm.cz/manjaro/unstable/$repo/$arch
20: https://mirror.init7.net/manjaro/unstable/$repo/$arch
21: https://ftp.tu-chemnitz.de/pub/linux/manjaro/unstable/$repo/$arch
22: https://ftp.linux.org.tr/manjaro/unstable/$repo/$arch
23: https://ftp.psnc.pl/linux/manjaro/unstable/$repo/$arch
24: https://mirrors.up.pt/pub/manjaro/unstable/$repo/$arch
25: https://manjaro.mirror.wearetriple.com/unstable/$repo/$arch
26: https://ftp.yz.yamagata-u.ac.jp/pub/linux/manjaro/unstable/$repo/$arch
27: https://mirrors.cicku.me/manjaro/unstable/$repo/$arch
28: https://mirrors.ucr.ac.cr/manjaro/unstable/$repo/$arch
29: https://codingflyboy.mm.fcix.net/manjaro/unstable/$repo/$arch
30: https://mirrors.ocf.berkeley.edu/manjaro/unstable/$repo/$arch
31: https://mirror.fcix.net/manjaro/unstable/$repo/$arch
32: https://repo.ialab.dsu.edu/manjaro/unstable/$repo/$arch
33: https://mirrors.netix.net/manjaro/unstable/$repo/$arch
34: https://mirrors.sonic.net/manjaro/unstable/$repo/$arch
35: https://ohioix.mm.fcix.net/manjaro/unstable/$repo/$arch
36: https://mirrors.gigenet.com/manjaro/unstable/$repo/$arch
37: https://manjaro.c3sl.ufpr.br/unstable/$repo/$arch
38: https://ipng.mm.fcix.net/manjaro/unstable/$repo/$arch
39: https://mirrors.ft.uam.es/manjaro/unstable/$repo/$arch
40: https://volico.mm.fcix.net/manjaro/unstable/$repo/$arch
41: https://ask4.mm.fcix.net/manjaro/unstable/$repo/$arch
42: https://mirror.koddos.net/manjaro/unstable/$repo/$arch
43: https://mirror.yandex.ru/mirrors/manjaro/unstable/$repo/$arch
44: https://forksystems.mm.fcix.net/manjaro/unstable/$repo/$arch
45: https://irltoolkit.mm.fcix.net/manjaro/unstable/$repo/$arch
46: https://distrohub.kyiv.ua/manjaro/unstable/$repo/$arch
47: https://manjaro.grena.ge/unstable/$repo/$arch
48: https://mirror.phoepsilonix.love/manjaro/unstable/$repo/$arch
49: https://mirror.alpix.eu/manjaro/unstable/$repo/$arch
50: https://ftp.snt.utwente.nl/pub/linux/manjaro/unstable/$repo/$arch
51: https://ct.mirror.garr.it/mirrors/manjaro/unstable/$repo/$arch
52: https://mirror.netcologne.de/manjaro/unstable/$repo/$arch
53: http://ftp.dei.uc.pt/pub/linux/manjaro/unstable/$repo/$arch
54: https://manjaro.mirrors.lavatech.top/unstable/$repo/$arch
55: https://fosszone.csd.auth.gr/manjaro/unstable/$repo/$arch
56: https://gsl-syd.mm.fcix.net/manjaro/unstable/$repo/$arch
57: https://ftp.halifax.rwth-aachen.de/manjaro/unstable/$repo/$arch
58: https://mirror.alwyzon.net/manjaro/unstable/$repo/$arch
59: https://ftp.gwdg.de/pub/linux/manjaro/unstable/$repo/$arch
60: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/unstable/$repo/$arch
61: https://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/unstable/$repo/$arch
62: https://ftpmirror1.infania.net/mirror/manjaro/unstable/$repo/$arch
63: https://mirrors.eric.ovh/manjaro/unstable/$repo/$arch
64: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/unstable/$repo/$arch
65: https://kartolo.sby.datautama.net.id/manjaro/unstable/$repo/$arch
66: https://opencolo.mm.fcix.net/manjaro/unstable/$repo/$arch
67: http://ftp.uni-kl.de/pub/linux/manjaro/unstable/$repo/$arch
68: https://mirror.23m.com/manjaro/unstable/$repo/$arch
69: https://mirror.raiolanetworks.com/manjaro/unstable/$repo/$arch
70: https://ftp.tsukuba.wide.ad.jp/Linux/manjaro/unstable/$repo/$arch
71: https://ftp.lysator.liu.se/pub/manjaro/unstable/$repo/$arch
72: https://ziply.mm.fcix.net/manjaro/unstable/$repo/$arch
73: https://mirror.dc.uz/manjaro/unstable/$repo/$arch
74: https://mirror.hiesoft.net/manjaro/unstable/$repo/$arch
75: http://ossmirror.mycloud.services/os/linux/manjaro/unstable/$repo/$arch
76: https://mirror.freedif.org/Manjaro/unstable/$repo/$arch
77: https://coresite.mm.fcix.net/manjaro/unstable/$repo/$arch
78: https://ftp.belnet.be/mirrors/manjaro/repos/unstable/$repo/$arch
79: https://free.nchc.org.tw/manjaro/unstable/$repo/$arch
80: https://nnenix.mm.fcix.net/manjaro/unstable/$repo/$arch
81: https://mirrors2.manjaro.org/unstable/$repo/$arch
82: https://manjaro.mirror.liquidtelecom.com/unstable/$repo/$arch
83: https://ba.mirror.garr.it/mirrors/manjaro/unstable/$repo/$arch
84: https://mirror.futureweb.be/manjaro/unstable/$repo/$arch
Processes:
CPU top: 5 of 346
1: cpu: 100% command: ps pid: 2800 mem: 3.78 MiB (0.0%)
2: cpu: 29.0% command: brave pid: 2249 mem: 314.0 MiB (1.9%)
3: cpu: 20.4% command: brave pid: 1821 mem: 455.1 MiB (2.8%)
4: cpu: 17.4% command: brave pid: 2685 mem: 274.6 MiB (1.7%)
5: cpu: 14.8% command: brave pid: 1871 mem: 190.0 MiB (1.1%)
Memory top: 5 of 346
1: mem: 975.4 MiB (6.1%) command: clamd pid: 709 cpu: 5.6%
2: mem: 455.1 MiB (2.8%) command: brave pid: 1821 cpu: 20.4%
3: mem: 376.5 MiB (2.3%) command: brave pid: 1947 cpu: 10.9%
4: mem: 369.2 MiB (2.3%) command: plasmashell pid: 1361 cpu: 3.1%
5: mem: 324.7 MiB (2.0%) command: brave pid: 2525 cpu: 6.7%
Info:
Processes: 346 Power: uptime: 4m states: freeze,standby,mem,disk
suspend: deep avail: s2idle,shallow wakeups: 0 hibernate: platform
avail: shutdown, reboot, suspend, test_resume image: 6.21 GiB
services: org_kde_powerdevil, power-profiles-daemon, upowerd Init: systemd
v: 261 default: graphical tool: systemctl
Compilers: gcc: 16.2.1 Shell: Zsh v: 5.9.2 running-in: konsole
inxi: 3.3.41
here are the boot log errors:
Oct 13 21:19:44 Bulldozer kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20260408/tbfadt-614)
Oct 13 21:19:44 Bulldozer kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Oct 13 21:19:44 Bulldozer kernel: virt/tdx: TDX not supported by the host platform
Oct 13 21:19:44 Bulldozer kernel: amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
Oct 13 21:19:44 Bulldozer kernel: caller pci_map_rom+0x6b/0x1a0 mapping multiple BARs
Oct 13 21:19:44 Bulldozer kernel: amdgpu 0000:01:00.0: [drm] Failed to setup vendor infoframe on connector DP-1: -22
Oct 13 21:19:45 Bulldozer kernel: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20260408/utaddress-204)
Oct 13 21:19:45 Bulldozer kernel: sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
Oct 13 21:19:45 Bulldozer kernel: sp5100-tco sp5100-tco: probe with driver sp5100-tco failed with error -16
Oct 13 21:19:45 Bulldozer (udev-worker)[457]: 6-3:1.0: Process '/bin/sh -c 'echo enabled > /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/power/wakeup'' failed with exit code 1.
Oct 13 21:19:45 Bulldozer (udev-worker)[462]: 6-3:1.1: Process '/bin/sh -c 'echo enabled > /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/power/wakeup'' failed with exit code 1.
Oct 13 21:19:45 Bulldozer (udev-worker)[451]: cfg80211: Process '/usr/bin/set-wireless-regdom' failed with exit code 1.
Oct 13 21:19:46 Bulldozer (modprobe)[711]: lm_sensors.service: Referenced but unset environment variable evaluates to an empty string: BUS_MODULES
Oct 13 21:19:47 Bulldozer dbus-broker-launch[704]: Activation request for 'org.freedesktop.home1' failed: The systemd unit 'dbus-org.freedesktop.home1.service' could not be found.
Oct 13 21:19:48 Bulldozer NetworkManager[706]: <warn> [1791940788.6476] device (/net/connman/iwd/0): error setting IPv4 forwarding to '0': Success
Oct 13 21:19:48 Bulldozer dbus-broker-launch[869]: Service file '/usr/share//dbus-1/services/org.kde.dolphin.FileManager1.service' is not named after the D-Bus name 'org.freedesktop.FileManager1'.
Oct 13 21:19:48 Bulldozer dbus-broker-launch[869]: Service file '/usr/share//dbus-1/services/org.kde.kscreen.service' is not named after the D-Bus name 'org.kde.KScreen'.
Oct 13 21:19:48 Bulldozer dbus-broker-launch[869]: Service file '/usr/share//dbus-1/services/org.kde.plasma.Notifications.service' is not named after the D-Bus name 'org.freedesktop.Notifications'.
Oct 13 21:19:49 Bulldozer kwin_wayland[871]: Device AMD Radeon RX 550 / 550 Series (RADV POLARIS12) misses required Vulkan extensions
Oct 13 21:19:49 Bulldozer kwin_wayland[871]: VK_EXT_image_drm_format_modifier
Oct 13 21:19:50 Bulldozer dbus-broker-launch[704]: Activation request for 'org.freedesktop.resolve1' failed: The systemd unit 'dbus-org.freedesktop.resolve1.service' could not be found.
Oct 13 21:19:50 Bulldozer plasma-login-wallpaper[903]: The backend got an unknown wallpaper provider type. The wallpaper will now fall back to the default. Please check your wallpaper configuration!
Oct 13 21:19:51 Bulldozer wireplumber[907]: default: Failed to get percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner
Oct 13 21:19:51 Bulldozer plasma-login-greeter[902]: qrc:/qt/qml/org/kde/plasma/login/GreeterState.qml:79: TypeError: Cannot read property 'LoginState' of undefined
Oct 13 21:19:51 Bulldozer plasma-login-greeter[902]: QDBusConnection: name 'org.freedesktop.UPower' had owner '' but we thought it was ':1.27'
Oct 13 21:20:06 Bulldozer dbus-broker[705]: A security policy denied :1.3 to send method call /midi/profile:org.bluez.GattProfile1.Release to :1.29.
Oct 13 21:20:10 Bulldozer (udev-worker)[1031]: 6-3:1.0: Process '/bin/sh -c 'echo enabled > /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/power/wakeup'' failed with exit code 1.
Oct 13 21:20:10 Bulldozer (udev-worker)[1033]: 6-3:1.1: Process '/bin/sh -c 'echo enabled > /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.1/power/wakeup'' failed with exit code 1.
Oct 13 21:20:22 Bulldozer kwin_wayland[871]: Failed to open /dev/input/event16 device (No such device)
Oct 13 21:20:27 Bulldozer dbus-broker-launch[1132]: Service file '/usr/share//dbus-1/services/org.kde.dolphin.FileManager1.service' is not named after the D-Bus name 'org.freedesktop.FileManager1'.
Oct 13 21:20:27 Bulldozer dbus-broker-launch[1132]: Service file '/usr/share//dbus-1/services/org.kde.kscreen.service' is not named after the D-Bus name 'org.kde.KScreen'.
Oct 13 21:20:27 Bulldozer dbus-broker-launch[1132]: Service file '/usr/share//dbus-1/services/org.kde.plasma.Notifications.service' is not named after the D-Bus name 'org.freedesktop.Notifications'.
Oct 13 21:20:28 Bulldozer kwin_wayland[1148]: Device AMD Radeon RX 550 / 550 Series (RADV POLARIS12) misses required Vulkan extensions
Oct 13 21:20:28 Bulldozer kwin_wayland[1148]: VK_EXT_image_drm_format_modifier
Oct 13 21:20:32 Bulldozer plasmalogin[831]: Auth: plasmalogin-helper exited with 255
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: [ 1394][ 0.180654] (i2c_ioctl_reader1 ) Error in ioctl() read, rc=-1, errno=EREMOTEIO(-121): Remote I/O error, device=/dev/i2c-4
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: [ 1394][ 0.282692] (i2c_ioctl_reader1 ) Error in ioctl() read, rc=-1, errno=EREMOTEIO(-121): Remote I/O error, device=/dev/i2c-4
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: [ 1394][ 0.384788] (i2c_ioctl_reader1 ) Error in ioctl() read, rc=-1, errno=EREMOTEIO(-121): Remote I/O error, device=/dev/i2c-4
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: [ 1394] Watching for DPMS state changes unimplemented
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: [ 1394][ 0.403557] (ddca_get_display_refs ) Called with include_invalid_displays=false
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: [ 1394][ 0.403575] (ddca_get_display_refs ) Returning DDCA_Display_Ref list:
Oct 13 21:20:34 Bulldozer backlighthelper[1445]: no kernel backlight interface found
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Oct 13 21:20:34 Bulldozer org_kde_powerdevil[1394]: org.kde.powerdevil.backlighthelper.brightness failed
Oct 13 21:20:35 Bulldozer kwin_wayland[1148]: The main thread was hanging temporarily!
Oct 13 21:20:35 Bulldozer org_kde_powerdevil[1394]: Handle button events action could not check for screen configuration
Oct 13 21:20:35 Bulldozer org_kde_powerdevil[1394]: org.kde.powerdevil.chargethresholdhelper.getthreshold failed "Charge thresholds are not supported by the kernel for this hardware"
Oct 13 21:20:37 Bulldozer kernel: warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Oct 13 21:20:37 Bulldozer /usr/lib/xdg-desktop-portal[1486]: Choosing gtk.portal for org.freedesktop.impl.portal.Lockdown as a last-resort fallback
Oct 13 21:20:38 Bulldozer ksmserver[1348]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.ksmserver'")
Oct 13 21:20:38 Bulldozer gmenudbusmenuproxy[1391]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.gmenudbusmenuproxy'")
Oct 13 21:20:38 Bulldozer xembedsniproxy[1395]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.xembedsniproxy'")
Oct 13 21:20:38 Bulldozer polkit-kde-authentication-agent-1[1393]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Unable to open /proc/1393/root")
Oct 13 21:20:38 Bulldozer org_kde_powerdevil[1394]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.org_kde_powerdevil'")
Oct 13 21:20:38 Bulldozer kactivitymanagerd[1379]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.ActivityManager'")
Oct 13 21:20:38 Bulldozer ksmserver[1348]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.ksmserver'")
Oct 13 21:20:38 Bulldozer gmenudbusmenuproxy[1391]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.gmenudbusmenuproxy'")
Oct 13 21:20:38 Bulldozer org_kde_powerdevil[1394]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:38 Bulldozer msm_kde_notifier[1473]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for ''")
Oct 13 21:20:38 Bulldozer kaccess[1392]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:38 Bulldozer xdg-desktop-portal-kde[1581]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:38 Bulldozer polkit-kde-authentication-agent-1[1393]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Unable to open /proc/1393/root")
Oct 13 21:20:38 Bulldozer xembedsniproxy[1395]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.xembedsniproxy'")
Oct 13 21:20:38 Bulldozer kactivitymanagerd[1379]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.ActivityManager'")
Oct 13 21:20:38 Bulldozer kdeconnectd[1474]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:38 Bulldozer pamac-tray-plasma[1491]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for ''")
Oct 13 21:20:38 Bulldozer ksplashqml[1153]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for ''")
Oct 13 21:20:38 Bulldozer plasmashell[1361]: Member visible of the object PlasmaQuick::Dialog overrides a member of the base object. Consider renaming it or adding final or override specifier
Oct 13 21:20:38 Bulldozer ksecretd[1079]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:39 Bulldozer kded6[1350]: Failed to connect to Bolt manager DBus interface:
Oct 13 21:20:39 Bulldozer plasmashell[1361]: Member enabled of the object DeclarativeDropArea overrides a member of the base object. Consider renaming it or adding final or override specifier
Oct 13 21:20:39 Bulldozer kconf_update[1643]: /usr/share/kconf_update/breath2tobreath.upd defined Version=5 but Version=6 was expected
Oct 13 21:20:39 Bulldozer kded6[1350]: PendingCall Error: "The name is not activatable"
Oct 13 21:20:39 Bulldozer kded6[1350]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:40 Bulldozer plasmashell[1361]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: Connection already associated with an application ID")
Oct 13 21:20:46 Bulldozer plasmashell[1361]: Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Oct 13 21:24:05 Bulldozer kernel: amdgpu 0000:01:00.0: Disabling VM faults because of PRT request!
Oct 13 21:39:14 Bulldozer baloo_file_extractor[3410]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.baloo'")
Oct 13 21:40:20 Bulldozer baloo_file_extractor[3457]: Failed to register with host portal QDBusError("org.freedesktop.portal.Error.Failed", "Could not register app ID: App info not found for 'org.kde.baloo'")
Oct 13 21:41:32 Bulldozer kioworker[3366]: Creating trash for "/" failed - no permission?
Oct 13 21:41:35 Bulldozer kioworker[3366]: Creating trash for "/" failed - no permission?
Oct 13 21:42:19 Bulldozer kioworker[3366]: Creating trash for "/" failed - no permission?
Mod Edit pasted the pastebin content with the </> button area.
Here are the contents of my grub file:
# GRUB boot loader configuration
GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Manjaro"
GRUB_CMDLINE_LINUX_DEFAULT="quiet loglevel=3 rd.udev.log_level=3"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y
# Set to 'countdown' or 'menu' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=hidden
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command 'videoinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/usr/share/grub/background.png"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT=false
# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y
# Uncomment this option to enable os-prober execution in the grub-mkconfig command
GRUB_DISABLE_OS_PROBER=false
# Uncomment to ensure that the root filesystem is mounted read-only so that
# systemd-fsck can run the check automatically. We use 'fsck' by default, which
# needs 'rw' as boot parameter, to avoid delay in boot-time. 'fsck' needs to be
# removed from 'mkinitcpio.conf' to make 'systemd-fsck' work.
# See also Arch-Wiki: https://wiki.archlinux.org/index.php/Fsck#Boot_time_checking
#GRUB_ROOT_FS_RO=true
GRUB_DISABLE_UEFI_FIRMWARE=true
Mod edit: Consecutive posts merged.
If you want to see the grub menu at boot, then you should change that to:
GRUB_TIMEOUT_STYLE=menu
Also, you may want to display the menu for longer than 5 seconds to allow you enough time to select the boot option. You can do this by changing the following line to something like 10 or 15 (seconds):
Make sure that you run sudo update-grub after making any changes to /etc/default/grub.
Edit 2026-10-14T02:50:00Z: there have been a couple of grub pacnew files after recent updates, as my pacman history shows:
[2026-10-07T09:35:56+1100] [ALPM] warning: /etc/default/grub installed as /etc/default/grub.pacnew
[2026-10-08T12:31:16+1100] [ALPM] warning: /etc/default/grub installed as /etc/default/grub.pacnew
It looks to me like you might have replaced your original /etc/default/grub file with the pacnew, rather than reviewed & merged any changes.
Understood. I have learned the hard way that its best to use the manjaro pacnew checker
I didnât find any stray pacnew files, but my log does show the same as yours.
⯠grep '\.pacnew' /var/log/pacman.log
[2026-05-02T08:40:19-0400] [ALPM] warning: /etc/mkinitcpio.conf installed as /etc/mkinitcpio.conf.pacnew
[2026-05-30T23:42:33-0400] [ALPM] warning: /etc/plymouth/plymouthd.conf installed as /etc/plymouth/plymouthd.conf.pacnew
[2026-06-25T21:25:26-0400] [ALPM] warning: /etc/plymouth/plymouthd.conf installed as /etc/plymouth/plymouthd.conf.pacnew
[2026-07-26T20:53:14-0400] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2026-08-15T08:35:17-0400] [ALPM] warning: /etc/tpm2-tss/fapi-profiles/P_ECCP384SHA384.json installed as /etc/tpm2-tss/fapi-profiles/P_ECCP384SHA384.json.pacnew
[2026-08-15T08:35:17-0400] [ALPM] warning: /etc/tpm2-tss/fapi-profiles/P_RSA3072SHA384.json installed as /etc/tpm2-tss/fapi-profiles/P_RSA3072SHA384.json.pacnew
[2026-10-08T17:48:55-0400] [ALPM] warning: /etc/default/grub installed as /etc/default/grub.pacnew
Maybe you have a problem with SDDM.
I would try to migrate to Plasma Login Manager by:
$ sudo pacman -Syu plasma-login-manager
$ systemctl disable sddm
$ systemctl enable plasmalogin
$ sudo pacman -Rsn sddm-kcm sddm
It had been recommended for a while already in unstable branch announcements:
Thank you for the reply! I switched to Plasma login manager shortly after It came out. I removed sddm afterwards
I found an old post from 2021 Manjaro bootsplash manager thinking it may help solve my problem. Sadly its no longer in the repoâs.
Mod edit: Consecutive posts merged; @mentions and spacer added.
At the moment I am a little confused as to what the actual issue is.
Is it to do with grub, which provides the boot options, such as the menu where you select which kernel/OS you want to boot into?
Or is it plymouth, which provides the splash screen when booting into the kernel?
Or is it sddm, which is where you type your username/password to load the desktop environment (Plasma, Gnome etc) after the kernel has loaded?
Your linking to the Bootsplash Manager topic has me thinking that the issue is actually to do with Plymouth, not GRUB or SDDM.
Perhaps your best option at this time would be to disable Plymouth (as I did many years ago). You can do it by changing your boot parameters in /etc/default/grub & editing the /etc/mkinitcpio.conf file - instructions can be found here:
I would recommend that you also remove "quiet" from the GRUB_CMDLINE_LINUX_DEFAULT= parameters, so that you will see the system messages as the system boots up and shuts down. It looks a lot better (to me) than a blank screen while the kernel is loading.
As I narrow down potential problems I should clarify that its the plymouth manjaro splash screen that quit working. Strange thing is I did the same updates to my laptop and it still works just fine, the main difference is that my PC uses MBR and laptop uses UEFI.
I have gotten it working again. I made sure âquiet splashâ was in my grub config. I also after doing some hunting, the search engine AI suggested that the plymouth hook needed to be earlier in the hooks for mkintcpio.conf. I moved plymouth a few hooks to the left and added amdgpu to modules and ran âsudo grub-mkconfig -o /boot/grub/grub.cfgâ.
# vim:set ft=sh:
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=(usbhid xhci_hcd)
MODULES=(amdgpu)
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr and fsck hooks.
HOOKS=(base udev autodetect microcode plymouth kms modconf block keyboard keymap filesystems resume fsck)
You donât need that as the amdgpu driver is built into the kernel and automatically loaded at boot. I removed it from my /etc/mkinitcpio.conf file a long time ago.
Have you been ignoring your .pacnew files? Youâre still using the busybox HOOKS rather than the systemd ones, which Arch (and thus Manjaro) moved to quite some time ago. Your system will still boot fine with the busybox HOOKS though, so you donât have to make the changes immediately if you donât want to.
You also probably donât need the resume HOOK, as you have no swap space set up for your device, so I am assuming you do not hibernate it (since swap is required for hibernation).
Here are the uncommented lines in my AMD mini-PCâs /etc/mkinitcpio.conf file as a comparison (remember - I donât have plymouth installed, so that entry is missing from my HOOKS):
MODULES=()
BINARIES=()
FILES=()
HOOKS=(systemd autodetect microcode modconf kms keyboard sd-vconsole block filesystems fsck)
I address the pacnew files immediately after updates. I will remove amdgpu from modules. Thank you for helping me get pointed in the right direction.
For future reference, Manjaro has a simpler script for that:
sudo update-grub
I know, iâm just nostagic and it pops up quickly in the zsh shell when you start typing ![]()