Manjaro Gnome on lenovo T14s AMD no input device (mic) since last update

Could you post the output of:

inxi --admin --verbosity=7 --filter --no-host --width
pacmd dump

from both a live Manjaro and live Ubuntu so we can compare what’s different?

:thinking:

Hi, I’m using Kernel 5.12.9-1 and have the same problem.

I tried with a Manjaro Boot Image from may 6th and there I have the internal mic available and working.

As far as I remember, the last update had new versions for some alsa packages. I think the problem is there. I tried the following command to check the audio pci devices:

lspci | grep -i audio

I get exact the same results from the boot image and the non working image.
If someone wants more tests that I should carry out on the boot image, please let me know.

Here are the results from my non working system::

The output of inxi --admin --verbosity=7 --filter --no-host --width is:

System:
  Kernel: 5.12.9-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.12-x86_64 
  root=UUID=58e0ebf5-9c8b-465a-9f61-39e718050447 rw quiet splash apparmor=1 
  security=apparmor resume=UUID=b46944a1-a51d-46d5-8775-2c0c25714f5d 
  udev.log_priority=3 
  Desktop: GNOME 3.38.4 tk: GTK 3.24.29 wm: gnome-shell dm: GDM 40.0 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Laptop System: LENOVO product: 20UH001QGE v: ThinkPad T14s Gen 1 
  serial: <filter> Chassis: type: 10 serial: <filter> 
  Mobo: LENOVO model: 20UH001QGE serial: <filter> UEFI: LENOVO 
  v: R1CET61W(1.30 ) date: 12/21/2020 
Battery:
  ID-1: BAT0 charge: 37.7 Wh (65.9%) condition: 57.2/57.0 Wh (100.3%) 
  volts: 11.8 min: 11.5 model: SMP 5B10W139 type: Li-poly serial: <filter> 
  status: Discharging cycles: 9 
Memory:
  RAM: total: 30.66 GiB used: 3.87 GiB (12.6%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 8-Core model: AMD Ryzen 7 PRO 4750U with Radeon Graphics bits: 64 
  type: MT MCP arch: Zen 2 family: 17 (23) model-id: 60 (96) stepping: 1 
  microcode: 8600106 cache: L2: 4 MiB bogomips: 54316 
  Speed: 1397 MHz min/max: 1400/1700 MHz boost: enabled Core speeds (MHz): 
  1: 1397 2: 1397 3: 1397 4: 1397 5: 1397 6: 1397 7: 1397 8: 1397 9: 1397 
  10: 1397 11: 1397 12: 1346 13: 1248 14: 1286 15: 1397 16: 1399 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm 
  lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx 
  nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni 
  popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni 
  skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor 
  svm svm_lock syscall tce topoext tsc tsc_scale umip v_vmsave_vmload vgif 
  vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt 
  xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: AMD Renoir vendor: Lenovo driver: amdgpu v: kernel bus-ID: 06:00.0 
  chip-ID: 1002:1636 class-ID: 0300 
  Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 2-2:2 
  chip-ID: 04f2:b6cb class-ID: fe01 serial: <filter> 
  Display: wayland server: X.org 1.20.11 compositor: gnome-shell driver: 
  loaded: amdgpu note: n/a (using device driver) - try sudo/root display-ID: 0 
  resolution: <missing: xdpyinfo> 
  OpenGL: renderer: AMD RENOIR (DRM 3.40.0 5.12.9-1-MANJARO LLVM 12.0.0) 
  v: 4.6 Mesa 21.1.2 direct render: Yes 
Audio:
  Device-1: AMD vendor: Lenovo driver: snd_hda_intel v: kernel bus-ID: 06:00.1 
  chip-ID: 1002:1637 class-ID: 0403 
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Lenovo 
  driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x bus-ID: 06:00.5 
  chip-ID: 1022:15e2 class-ID: 0480 
  Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel 
  v: kernel bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403 
  Sound Server-1: ALSA v: k5.12.9-1-MANJARO running: yes 
  Sound Server-2: JACK v: 0.125.0 running: no 
  Sound Server-3: PulseAudio v: 14.2 running: yes 
  Sound Server-4: PipeWire v: 0.3.30 running: no 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Lenovo driver: r8168 v: 8.048.03-NAPI modules: r8169 port: 2400 
  bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: enp2s0f0 state: down mac: <filter> 
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 2000 
  bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280 
  IF: wlp3s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  IF-ID-1: docker0 state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 6-4:3 
  chip-ID: 8087:0029 class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends 
Logical:
  Permissions: Unable to run lvs. Root privileges required. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 969.7 GiB used: 58.62 GiB (6.0%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital 
  model: PC SN730 SDBQNTY-1T00-1001 size: 953.87 GiB block-size: 
  physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD 
  serial: <filter> rev: 11170101 scheme: GPT 
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Generic model: USB Flash 
  size: 1015.2 MiB block-size: physical: 512 B logical: 512 B rotation: SSD 
  serial: <filter> rev: 1.00 scheme: MBR 
  ID-3: /dev/sdb maj-min: 8:16 type: USB model: USB Flash size: 14.84 GiB 
  block-size: physical: 512 B logical: 512 B rotation: SSD serial: <filter> 
  rev: 1100 scheme: MBR 
  Message: No optical or floppy data found. 
Partition:
  ID-1: / raw-size: 919.84 GiB size: 904.33 GiB (98.31%) 
  used: 58.54 GiB (6.5%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 
  label: N/A uuid: 58e0ebf5-9c8b-465a-9f61-39e718050447 
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) 
  used: 296 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 
  label: NO_LABEL uuid: 0BD4-9E42 
  ID-3: /run/media/alu/transfer raw-size: 376 MiB size: 375.8 MiB (99.94%) 
  used: 76.7 MiB (20.4%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: transfer 
  uuid: D3E8-958E 
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 33.72 GiB used: 0 KiB (0.0%) priority: -2 
  dev: /dev/nvme0n1p3 maj-min: 259:3 label: N/A 
  uuid: b46944a1-a51d-46d5-8775-2c0c25714f5d 
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 2.61 GiB fs: <superuser required> 
  label: MANJARO_GNOME_2104 uuid: 2021-05-06-11-34-55-00 
  ID-2: /dev/sdb2 maj-min: 8:18 size: 4 MiB fs: <superuser required> 
  label: MISO_EFI uuid: F780-2E0C 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 2-2:2 info: Chicony Integrated Camera type: Video driver: uvcvideo 
  interfaces: 5 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6cb 
  class-ID: fe01 serial: <filter> 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 4-2:3 info: iCreate Flash Disk 256 MB type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 100mA 
  chip-ID: 1043:8012 class-ID: 0806 
  Device-2: 4-3:2 info: Alcor Micro AU9540 Smartcard Reader type: Smart Card 
  driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 50mA 
  chip-ID: 058f:9540 class-ID: 0b00 
  Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 6-2:4 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 
  speed: 480 Mb/s power: 500mA chip-ID: 090c:1000 class-ID: 0806 
  Device-2: 6-3:2 info: Synaptics Prometheus MIS Touch Fingerprint Reader 
  type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s 
  power: 100mA chip-ID: 06cb:00bd class-ID: ff00 serial: <filter> 
  Device-3: 6-4:3 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb 
  interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 
  class-ID: e001 
  Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 38.4 C mobo: 0.0 C gpu: amdgpu temp: 38.0 C 
  Fan Speeds (RPM): cpu: 0 
Info:
  Processes: 394 Uptime: 1h 58m wakeups: 16 Init: systemd v: 248 
  tool: systemctl Compilers: gcc: 11.1.0 Packages: 1253 pacman: 1244 lib: 302 
  flatpak: 0 snap: 9 Shell: Zsh v: 5.8 running-in: gnome-terminal inxi: 3.3.04 

The output to pacmd dump is:

### Configuration dump generated at Fri Jun 18 11:12:22 2021

load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
load-module module-udev-detect
load-module module-alsa-card device_id="0" name="pci-0000_06_00.1" card_name="alsa_card.pci-0000_06_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
load-module module-alsa-card device_id="1" name="pci-0000_06_00.6" card_name="alsa_card.pci-0000_06_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
load-module module-jackdbus-detect channels=2
load-module module-bluetooth-policy
load-module module-bluetooth-discover
load-module module-bluez5-discover
load-module module-dbus-protocol
load-module module-native-protocol-unix
load-module module-gsettings
load-module module-default-device-restore
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-console-kit
load-module module-systemd-login
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-cli-protocol-unix

set-sink-volume alsa_output.pci-0000_06_00.6.analog-stereo 0x8de4
set-sink-mute alsa_output.pci-0000_06_00.6.analog-stereo no
suspend-sink alsa_output.pci-0000_06_00.6.analog-stereo yes

set-source-volume alsa_output.pci-0000_06_00.6.analog-stereo.monitor 0x10000
set-source-mute alsa_output.pci-0000_06_00.6.analog-stereo.monitor no
suspend-source alsa_output.pci-0000_06_00.6.analog-stereo.monitor yes

set-card-profile alsa_card.pci-0000_06_00.1 off
set-card-profile alsa_card.pci-0000_06_00.6 output:analog-stereo

set-default-sink alsa_output.pci-0000_06_00.6.analog-stereo
set-default-source alsa_output.pci-0000_06_00.6.analog-stereo.monitor

### EOF

The output of inxi --admin --verbosity=7 --filter --no-host --width on my working system (live usb) is:

System:
  Kernel: 5.10.34-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC 
  misobasedir=manjaro misolabel=MANJARO_GNOME_2104 quiet systemd.show_status=1 
  driver=free nouveau.modeset=1 i915.modeset=1 radeon.modeset=1 
  Desktop: GNOME 3.38.4 tk: GTK 3.24.29 wm: gnome-shell dm: GDM 40.0 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Laptop System: LENOVO product: 20UH001QGE v: ThinkPad T14s Gen 1 
  serial: <filter> Chassis: type: 10 serial: <filter> 
  Mobo: LENOVO model: 20UH001QGE serial: <filter> UEFI: LENOVO 
  v: R1CET61W(1.30 ) date: 12/21/2020 
Battery:
  ID-1: BAT0 charge: 35.7 Wh (62.4%) condition: 57.2/57.0 Wh (100.3%) 
  volts: 11.7 min: 11.5 model: SMP 5B10W139 type: Li-poly serial: <filter> 
  status: Discharging cycles: 9 
Memory:
  RAM: total: 30.66 GiB used: 2.4 GiB (7.8%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 8-Core model: AMD Ryzen 7 PRO 4750U with Radeon Graphics bits: 64 
  type: MT MCP arch: Zen 2 family: 17 (23) model-id: 60 (96) stepping: 1 
  microcode: 8600106 cache: L2: 4 MiB bogomips: 54294 
  Speed: 2159 MHz min/max: 1400/1700 MHz boost: enabled Core speeds (MHz): 
  1: 2159 2: 1942 3: 1397 4: 1397 5: 1397 6: 1396 7: 1397 8: 1396 9: 2242 
  10: 1865 11: 1309 12: 1317 13: 1308 14: 1317 15: 1397 16: 1397 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm 
  lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx 
  nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni 
  popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni 
  skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor 
  svm svm_lock syscall tce topoext tsc tsc_scale umip v_vmsave_vmload vgif 
  vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt 
  xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: AMD Renoir vendor: Lenovo driver: amdgpu v: kernel bus-ID: 06:00.0 
  chip-ID: 1002:1636 class-ID: 0300 
  Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 2-2:2 
  chip-ID: 04f2:b6cb class-ID: fe01 serial: <filter> 
  Display: wayland server: X.org 1.20.11 compositor: gnome-shell driver: 
  loaded: amdgpu note: n/a (using device driver) - try sudo/root display-ID: 0 
  resolution: <missing: xdpyinfo> 
  OpenGL: renderer: AMD RENOIR (DRM 3.40.0 5.10.34-1-MANJARO LLVM 11.1.0) 
  v: 4.6 Mesa 21.0.3 direct render: Yes 
Audio:
  Device-1: AMD vendor: Lenovo driver: snd_hda_intel v: kernel bus-ID: 06:00.1 
  chip-ID: 1002:1637 class-ID: 0403 
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Lenovo 
  driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x bus-ID: 06:00.5 
  chip-ID: 1022:15e2 class-ID: 0480 
  Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel 
  v: kernel bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403 
  Sound Server-1: ALSA v: k5.10.34-1-MANJARO running: yes 
  Sound Server-2: JACK v: 0.125.0 running: no 
  Sound Server-3: PulseAudio v: 14.2 running: yes 
  Sound Server-4: PipeWire v: 0.3.26 running: no 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Lenovo driver: r8169 v: kernel port: 2400 bus-ID: 02:00.0 
  chip-ID: 10ec:8168 class-ID: 0200 
  IF: enp2s0f0 state: down mac: <filter> 
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 2000 
  bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280 
  IF: wlp3s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 6-4:4 
  chip-ID: 8087:0029 class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 968.71 GiB used: 0 KiB (0.0%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital 
  model: PC SN730 SDBQNTY-1T00-1001 size: 953.87 GiB block-size: 
  physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD 
  serial: <filter> rev: 11170101 temp: 34.9 C scheme: GPT 
  ID-2: /dev/sda maj-min: 8:0 type: USB model: USB Flash size: 14.84 GiB 
  block-size: physical: 512 B logical: 512 B rotation: SSD serial: <filter> 
  rev: 1100 scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No optical or floppy data found. 
Partition:
  Message: No partition data found. 
Swap:
  Alert: No swap data was found. 
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 300 MiB fs: vfat label: NO_LABEL 
  uuid: 0BD4-9E42 
  ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 919.84 GiB fs: ext4 label: N/A 
  uuid: 58e0ebf5-9c8b-465a-9f61-39e718050447 
  ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 33.72 GiB fs: swap label: N/A 
  uuid: b46944a1-a51d-46d5-8775-2c0c25714f5d 
  ID-4: /dev/sda1 maj-min: 8:1 size: 2.61 GiB fs: iso9660 
  label: MANJARO_GNOME_2104 uuid: 2021-05-06-11-34-55-00 
  ID-5: /dev/sda2 maj-min: 8:2 size: 4 MiB fs: vfat label: MISO_EFI 
  uuid: F780-2E0C 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 2-2:2 info: Chicony Integrated Camera type: Video driver: uvcvideo 
  interfaces: 5 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6cb 
  class-ID: fe01 serial: <filter> 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 4-3:2 info: Alcor Micro AU9540 Smartcard Reader type: Smart Card 
  driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 50mA 
  chip-ID: 058f:9540 class-ID: 0b00 
  Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 6-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 
  speed: 480 Mb/s power: 500mA chip-ID: 090c:1000 class-ID: 0806 
  Device-2: 6-3:3 info: Synaptics Prometheus MIS Touch Fingerprint Reader 
  type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s 
  power: 100mA chip-ID: 06cb:00bd class-ID: ff00 serial: <filter> 
  Device-3: 6-4:4 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb 
  interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 
  class-ID: e001 
  Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 42.2 C mobo: 0.0 C gpu: amdgpu temp: 41.0 C 
  Fan Speeds (RPM): cpu: 0 
Info:
  Processes: 328 Uptime: 8m wakeups: 1 Init: systemd v: 247 tool: systemctl 
  Compilers: gcc: N/A Packages: pacman: 1203 lib: 293 flatpak: 0 Shell: Zsh 
  v: 5.8 running-in: gnome-terminal inxi: 3.3.04
> pacmd dump      
    ### Configuration dump generated at Fri Jun 18 09:28:28 2021

    load-module module-device-restore
    load-module module-stream-restore
    load-module module-card-restore
    load-module module-augment-properties
    load-module module-switch-on-port-available
    load-module module-udev-detect
    load-module module-alsa-card device_id="0" name="pci-0000_06_00.1" card_name="alsa_card.pci-0000_06_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
    load-module module-alsa-card device_id="1" name="pci-0000_06_00.6" card_name="alsa_card.pci-0000_06_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
    load-module module-jackdbus-detect channels=2
    load-module module-bluetooth-policy
    load-module module-bluetooth-discover
    load-module module-bluez5-discover
    load-module module-dbus-protocol
    load-module module-native-protocol-unix
    load-module module-gsettings
    load-module module-default-device-restore
    load-module module-always-sink
    load-module module-intended-roles
    load-module module-suspend-on-idle
    load-module module-console-kit
    load-module module-systemd-login
    load-module module-position-event-sounds
    load-module module-role-cork
    load-module module-filter-heuristics
    load-module module-filter-apply
    load-module module-cli-protocol-unix

    set-sink-volume alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink 0x2223
    set-sink-mute alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink yes
    suspend-sink alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink yes

    set-source-volume alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink.monitor 0x10000
    set-source-mute alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink.monitor no
    suspend-source alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink.monitor yes
    set-source-volume alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source 0x29c2
    set-source-mute alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source yes
    suspend-source alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source yes
    set-source-volume alsa_input.pci-0000_06_00.6.HiFi__hw_Generic_1__source 0x29c2
    set-source-mute alsa_input.pci-0000_06_00.6.HiFi__hw_Generic_1__source yes
    suspend-source alsa_input.pci-0000_06_00.6.HiFi__hw_Generic_1__source yes

    set-card-profile alsa_card.pci-0000_06_00.1 off
    set-card-profile alsa_card.pci-0000_06_00.6 HiFi

    set-default-sink alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink
    set-default-source alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source

    ### EOF

Working (Ubuntu 20.04 live):

ubuntu@ubuntu:~$ pacmd dump
### Configuration dump generated at Fri Jun 18 10:08:46 2021

load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
load-module module-switch-on-connect
load-module module-udev-detect
load-module module-alsa-card device_id="0" name="pci-0000_06_00.1" card_name="alsa_card.pci-0000_06_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
load-module module-alsa-card device_id="1" name="pci-0000_06_00.6" card_name="alsa_card.pci-0000_06_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
load-module module-bluetooth-policy
load-module module-bluetooth-discover
load-module module-bluez5-discover
load-module module-native-protocol-unix
load-module module-default-device-restore
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-console-kit
load-module module-systemd-login
load-module module-position-event-sounds
load-module module-role-cork
load-module module-snap-policy
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-x11-publish display=:0 xauthority=/run/user/999/gdm/Xauthority
load-module module-x11-cork-request display=:0 xauthority=/run/user/999/gdm/Xauthority
load-module module-x11-xsmp display=:0 xauthority=/run/user/999/gdm/Xauthority session_manager=local/ubuntu:@/tmp/.ICE-unix/5077,unix/ubuntu:/tmp/.ICE-unix/5077
load-module module-cli-protocol-unix

set-sink-volume alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink 0xa186
set-sink-mute alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink no
suspend-sink alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink yes

set-source-volume alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink.monitor 0x10000
set-source-mute alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink.monitor no
suspend-source alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink.monitor yes
set-source-volume alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source 0x10000
set-source-mute alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source no
suspend-source alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source yes
set-source-volume alsa_input.pci-0000_06_00.6.HiFi__hw_Generic_1__source 0x29c2
set-source-mute alsa_input.pci-0000_06_00.6.HiFi__hw_Generic_1__source yes
suspend-source alsa_input.pci-0000_06_00.6.HiFi__hw_Generic_1__source yes

set-card-profile alsa_card.pci-0000_06_00.1 off
set-card-profile alsa_card.pci-0000_06_00.6 HiFi

set-default-sink alsa_output.pci-0000_06_00.6.HiFi__hw_Generic_1__sink
set-default-source alsa_input.pci-0000_06_00.6.HiFi__hw_acp__source

### EOF
ubuntu@ubuntu:~$ inxi --admin --verbosity=7 --filter --no-host --width
System:
  Kernel: 5.8.0-43-generic x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed 
  maybe-ubiquity quiet splash --- 
  Desktop: GNOME 3.36.4 tk: GTK 3.24.20 wm: gnome-shell dm: GDM3 3.36.3 
  Distro: Ubuntu 20.04.2 LTS (Focal Fossa) 
Machine:
  Type: Laptop System: LENOVO product: 20UH001QGE v: ThinkPad T14s Gen 1 
  serial: <filter> Chassis: type: 10 serial: <filter> 
  Mobo: LENOVO model: 20UH001QGE serial: <filter> UEFI: LENOVO 
  v: R1CET61W(1.30 ) date: 12/21/2020 
Battery:
  ID-1: BAT0 charge: 31.0 Wh condition: 52.9/57.0 Wh (93%) volts: 11.6/11.5 
  model: Celxpert 5B10W139 type: Li-poly serial: <filter> status: Discharging 
  cycles: 148 
Memory:
  RAM: total: 30.66 GiB used: 2.03 GiB (6.6%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 8-Core model: AMD Ryzen 7 PRO 4750U with Radeon Graphics bits: 64 
  type: MT MCP arch: Zen 2 family: 17 (23) model-id: 60 (96) stepping: 1 
  microcode: 8600106 L2 cache: 4 MiB bogomips: 54296 
  Speed: 1397 MHz min/max: 1400/1700 MHz boost: enabled Core speeds (MHz): 
  1: 1397 2: 1396 3: 1397 4: 1396 5: 1399 6: 1396 7: 1397 8: 1396 9: 1397 
  10: 1396 11: 1399 12: 1397 13: 1400 14: 1397 15: 1397 16: 1397 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm 
  lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx 
  nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni 
  popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni 
  skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor 
  svm svm_lock syscall tce topoext tsc tsc_scale umip v_vmsave_vmload vgif 
  vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt 
  xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: AMD Renoir vendor: Lenovo driver: amdgpu v: kernel bus ID: 06:00.0 
  chip ID: 1002:1636 class ID: 0300 
  Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus ID: 2-2:2 
  chip ID: 04f2:b6cb class ID: fe01 serial: <filter> 
  Display: x11 server: X.Org 1.20.9 compositor: gnome-shell driver: 
  loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa display ID: :0 
  screens: 1 
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
  s-diag: 582mm (22.9") 
  Monitor-1: eDP res: 1920x1080 hz: 60 dpi: 158 size: 309x173mm (12.2x6.8") 
  diag: 354mm (13.9") 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: AMD vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 06:00.1 
  chip ID: 1002:1637 class ID: 0403 
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Lenovo 
  driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x bus ID: 06:00.5 
  chip ID: 1022:15e2 class ID: 0480 
  Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel 
  v: kernel bus ID: 06:00.6 chip ID: 1022:15e3 class ID: 0403 
  Sound Server: ALSA v: k5.8.0-43-generic 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Lenovo driver: r8169 v: kernel port: 2400 bus ID: 02:00.0 
  chip ID: 10ec:8168 class ID: 0200 
  IF: enp2s0f0 state: down mac: <filter> 
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 2000 
  bus ID: 03:00.0 chip ID: 8086:2723 class ID: 0280 
  IF: wlp3s0 state: up mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: temporary dynamic scope: global 
  IP v6: <filter> type: dynamic mngtmpaddr noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Intel type: USB driver: btusb v: 0.8 bus ID: 6-4:4 
  chip ID: 8087:0029 class ID: e001 
  Report: ID: hci0 state: up running bt-v: 3.0 lmp-v: 5.1 sub-v: 100 
  hci-v: 5.1 rev: 100 address: <filter> 
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff 
  link-mode: slave accept service-classes: rendering, capturing 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 957.64 GiB used: 204.3 MiB (0.0%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLB1T0HBLR-000L7 
  size: 953.87 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s 
  lanes: 4 rotation: SSD serial: <filter> rev: 5M2QEXF7 temp: 36.9 C 
  scheme: GPT 
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SMI (STMicroelectronics) 
  model: USB DISK size: 3.77 GiB block size: physical: 512 B logical: 512 B 
  serial: <filter> rev: 1100 scheme: MBR 
  Message: No Optical or Floppy data was found. 
Partition:
  ID-1: / raw size: N/A size: 15.33 GiB used: 200.8 MiB (1.3%) fs: overlay 
  source: ERR-102 label: N/A uuid: N/A 
  ID-2: /cdrom raw size: 2.68 GiB size: <superuser required> 
  used: <superuser required> fs: iso9660 dev: /dev/sda1 maj-min: 8:1 
  label: Ubuntu 20.04.2.0 LTS amd64 uuid: 2021-02-09-19-06-26-00 
  ID-3: /var/crash raw size: 1.09 GiB size: <superuser required> 
  used: <superuser required> fs: ext4 dev: /dev/sda3 maj-min: 8:3 
  label: writable uuid: 8c8fecb1-2a4d-41a8-9ae1-39cff57db593 
  ID-4: /var/log raw size: 1.09 GiB size: 1.04 GiB (95.56%) 
  used: 3.5 MiB (0.3%) fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: writable 
  uuid: 8c8fecb1-2a4d-41a8-9ae1-39cff57db593 
Swap:
  Alert: No Swap data was found. 
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 300 MiB fs: vfat label: N/A 
  uuid: D88C-D644 
  ID-2: /dev/sda2 maj-min: 8:2 size: 3.9 MiB fs: vfat label: N/A 
  uuid: 54C5-9C6C 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
  Device-1: 2-2:2 info: Chicony Integrated Camera type: Video driver: uvcvideo 
  interfaces: 5 rev: 2.0 speed: 480 Mb/s chip ID: 04f2:b6cb class ID: fe01 
  serial: <filter> 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s 
  chip ID: 1d6b:0003 class ID: 0900 
  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
  Device-1: 4-3:2 info: Alcor Micro AU9540 Smartcard Reader type: Smart Card 
  driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 058f:9540 
  class ID: 0b00 
  Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 class ID: 0900 
  Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900 
  Device-1: 6-2:2 info: Silicon Motion - Taiwan (formerly Feiya ) Flash Drive 
  type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0 
  speed: 480 Mb/s chip ID: 090c:1000 class ID: 0806 serial: <filter> 
  Device-2: 6-3:3 info: Synaptics type: <vendor specific> driver: N/A 
  interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 06cb:00bd class ID: ff00 
  serial: <filter> 
  Device-3: 6-4:4 info: Intel type: Bluetooth driver: btusb interfaces: 2 
  rev: 2.0 speed: 12 Mb/s chip ID: 8087:0029 class ID: e001 
  Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip ID: 1d6b:0003 class ID: 0900 
Sensors:
  Missing: Required tool sensors not installed. Check --recommends 
Info:
  Processes: 352 Uptime: 13m wakeups: 1 Init: systemd v: 245 runlevel: 5 
  Compilers: gcc: N/A Packages: 1791 apt: 1785 lib: 805 snap: 6 Shell: Bash 
  v: 5.0.17 running in: gnome-terminal inxi: 3.3.01 
1 Like

not working manjaro live:

pacmd dump
### Configuration dump generated at Fri Jun 18 10:24:55 2021

load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
load-module module-udev-detect
load-module module-alsa-card device_id="1" name="pci-0000_06_00.1" card_name="alsa_card.pci-0000_06_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
load-module module-alsa-card device_id="2" name="pci-0000_06_00.6" card_name="alsa_card.pci-0000_06_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
load-module module-jackdbus-detect channels=2
load-module module-bluetooth-policy
load-module module-bluetooth-discover
load-module module-bluez5-discover
load-module module-dbus-protocol
load-module module-native-protocol-unix
load-module module-gsettings
load-module module-default-device-restore
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
load-module module-console-kit
load-module module-systemd-login
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-cli-protocol-unix

set-sink-volume alsa_output.pci-0000_06_00.6.analog-stereo 0x75b1
set-sink-mute alsa_output.pci-0000_06_00.6.analog-stereo no
suspend-sink alsa_output.pci-0000_06_00.6.analog-stereo yes

set-source-volume alsa_output.pci-0000_06_00.6.analog-stereo.monitor 0x10000
set-source-mute alsa_output.pci-0000_06_00.6.analog-stereo.monitor no
suspend-source alsa_output.pci-0000_06_00.6.analog-stereo.monitor yes

set-card-profile alsa_card.pci-0000_06_00.1 off
set-card-profile alsa_card.pci-0000_06_00.6 output:analog-stereo

set-default-sink alsa_output.pci-0000_06_00.6.analog-stereo
set-default-source alsa_output.pci-0000_06_00.6.analog-stereo.monitor

### EOF

inxi --admin --verbosity=7 --filter --no-host --width 
System:
  Kernel: 5.10.42-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC 
  misobasedir=manjaro misolabel=MANJARO_GNOMEM_2107 quiet 
  systemd.show_status=1 driver=free nouveau.modeset=1 i915.modeset=1 
  radeon.modeset=1 
  Desktop: GNOME 3.38.4 tk: GTK 3.24.29 wm: gnome-shell dm: GDM 40.0 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Laptop System: LENOVO product: 20UH001QGE v: ThinkPad T14s Gen 1 
  serial: <filter> Chassis: type: 10 serial: <filter> 
  Mobo: LENOVO model: 20UH001QGE serial: <filter> UEFI: LENOVO 
  v: R1CET61W(1.30 ) date: 12/21/2020 
Battery:
  ID-1: BAT0 charge: 30.2 Wh (57.1%) condition: 52.9/57.0 Wh (92.7%) 
  volts: 11.6 min: 11.5 model: Celxpert 5B10W139 type: Li-poly 
  serial: <filter> status: Discharging cycles: 148 
Memory:
  RAM: total: 30.66 GiB used: 1.76 GiB (5.8%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 8-Core model: AMD Ryzen 7 PRO 4750U with Radeon Graphics bits: 64 
  type: MT MCP arch: Zen 2 family: 17 (23) model-id: 60 (96) stepping: 1 
  microcode: 8600106 cache: L2: 4 MiB bogomips: 54316 
  Speed: 1397 MHz min/max: 1400/1700 MHz boost: enabled Core speeds (MHz): 
  1: 1397 2: 1397 3: 1397 4: 1396 5: 1397 6: 1397 7: 1399 8: 1396 9: 1395 
  10: 1397 11: 1398 12: 1396 13: 1397 14: 1397 15: 1397 16: 1396 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs irperf lahf_lm 
  lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx 
  nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni 
  popcnt pse pse36 rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni 
  skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor 
  svm svm_lock syscall tce topoext tsc tsc_scale umip v_vmsave_vmload vgif 
  vmcb_clean vme vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt 
  xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: conditional, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: AMD Renoir vendor: Lenovo driver: amdgpu v: kernel bus-ID: 06:00.0 
  chip-ID: 1002:1636 class-ID: 0300 
  Device-2: Chicony Integrated Camera type: USB driver: uvcvideo bus-ID: 2-2:2 
  chip-ID: 04f2:b6cb class-ID: fe01 serial: <filter> 
  Display: wayland server: X.org 1.20.11 compositor: gnome-shell driver: 
  loaded: amdgpu note: n/a (using device driver) - try sudo/root display-ID: 0 
  resolution: <missing: xdpyinfo> 
  OpenGL: renderer: AMD RENOIR (DRM 3.40.0 5.10.42-1-MANJARO LLVM 12.0.0) 
  v: 4.6 Mesa 21.1.2 direct render: Yes 
Audio:
  Device-1: AMD vendor: Lenovo driver: snd_hda_intel v: kernel bus-ID: 06:00.1 
  chip-ID: 1002:1637 class-ID: 0403 
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Lenovo 
  driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x bus-ID: 06:00.5 
  chip-ID: 1022:15e2 class-ID: 0480 
  Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel 
  v: kernel bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403 
  Sound Server-1: ALSA v: k5.10.42-1-MANJARO running: yes 
  Sound Server-2: JACK v: 0.125.0 running: no 
  Sound Server-3: PulseAudio v: 14.2 running: yes 
  Sound Server-4: PipeWire v: 0.3.30 running: no 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Lenovo driver: r8169 v: kernel port: 2400 bus-ID: 02:00.0 
  chip-ID: 10ec:8168 class-ID: 0200 
  IF: enp2s0f0 state: down mac: <filter> 
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: 2000 
  bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280 
  IF: wlp3s0 state: down mac: <filter> 
  WAN IP: No WAN IP found. Connected to web? SSL issues? Try enabling dig 
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 6-4:4 
  chip-ID: 8087:0029 class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 2 state: up address: see --recommends 
Logical:
  Permissions: Unable to run lvs. Root privileges required. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 961.32 GiB used: 0 KiB (0.0%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLB1T0HBLR-000L7 
  size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s 
  lanes: 4 rotation: SSD serial: <filter> rev: 5M2QEXF7 temp: 37.9 C 
  scheme: GPT 
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Cruzer Blade 
  size: 7.45 GiB block-size: physical: 512 B logical: 512 B serial: <filter> 
  rev: 1.26 scheme: MBR 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Message: No optical or floppy data found. 
Partition:
  Message: No partition data found. 
Swap:
  Alert: No swap data was found. 
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 300 MiB fs: fat (32 bit) 
  label: N/A uuid: D88C-D644 
  ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 919.84 GiB 
  fs: <superuser required> label: N/A 
  uuid: e4b5b0bf-7414-41d3-ac97-bd7126198423 
  ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 33.73 GiB fs: <superuser required> 
  label: N/A uuid: 512a6877-2201-44cd-bc6e-a50c5ef34e00 
  ID-4: /dev/sda1 maj-min: 8:1 size: 2.16 GiB fs: <superuser required> 
  label: MANJARO_GNOMEM_2107 uuid: 2021-06-14-15-41-33-00 
  ID-5: /dev/sda2 maj-min: 8:2 size: 4 MiB fs: <superuser required> 
  label: MISO_EFI uuid: 2E13-440A 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 2-2:2 info: Chicony Integrated Camera type: Video driver: uvcvideo 
  interfaces: 5 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b6cb 
  class-ID: fe01 serial: <filter> 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 4-3:2 info: Alcor Micro AU9540 Smartcard Reader type: Smart Card 
  driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 50mA 
  chip-ID: 058f:9540 class-ID: 0b00 
  Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 6-2:2 info: SanDisk Cruzer Blade type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA 
  chip-ID: 0781:5567 class-ID: 0806 serial: <filter> 
  Device-2: 6-3:3 info: Synaptics Prometheus MIS Touch Fingerprint Reader 
  type: <vendor specific> driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s 
  power: 100mA chip-ID: 06cb:00bd class-ID: ff00 serial: <filter> 
  Device-3: 6-4:4 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb 
  interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 
  class-ID: e001 
  Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 43.8 C mobo: 0.0 C gpu: amdgpu temp: 43.0 C 
  Fan Speeds (RPM): cpu: 2800 
Info:
  Processes: 355 Uptime: 1m wakeups: 1 Init: systemd v: 248 tool: systemctl 
  Compilers: gcc: N/A Packages: pacman: 1027 lib: 277 Shell: Zsh v: 5.8 
  running-in: gnome-terminal inxi: 3.3.04 
1 Like

Btw, this is how it’s visible under settings. Since it’s a german os, you should look at Eingabegerät (input device). The list is empty. If I connect my headset via 3.5mm jack, the headset mic is immediately available.
NoMic

Same here, but i don´t have an input available with headphones plugged in. :thinking:

So Ubuntu only has ALSA running and not PulseAudio so can you check:

alsamixer

and verify F3Playback is not 0?

then:

aplay /path/to/anyfile.wav

so play any .wav file you have on your system (Not .mp3, not .ogg, just a simple .wav) or download one and test with that.

:thinking:

Yup, that works, can play wav’s without a problem.

So you have 3 different Sound Cards… in pavucontrol you should be able to set the correct Profile at Configuration. Possible that the configuration was reset to default and another profile is used now.

Try what @megavolt told you first. If that doesn’t work or you need exact steps on how to do that, please let us know.

:crossed_fingers:

Hello,

I’m experiencing the exact same problem. When I try to set profiles in pavucontrol, I see three profiles for the Family 17h HD Audio Controller:

  • Analog Stereo Duplex (unavailable)
  • Analog Stereo Output
  • Analog Stereo Input (unplugged)(unavailable)

Setting any if the unavailable / unplugged profiles makes the microphone appear in the input sources, but it is marked as unplugged, and no sound is showing on the volume bar.

Nearly the same here: no matter which profile I use of the 3 available ones, the mic doesn’t show up in the audio settings

Same goes for me.

Can you try the following:

  1. Execute:

    pamac install alsa-tools
    hdajackretask
    
  2. Click on Select a codec, take your internal sound card (I.E. not the HDMI one as that goes to an external monitor)

  3. Look if the mic is showing up there

  4. If not: click on Show unconnected pins

  5. Click Override on one of the unconnected pins

  6. Choose the internal mic (or similar) from the drop down list

  7. Click Apply now

  8. If that gets you an error message:

    • Click Install boot override
    • Reboot

and see if it works now.

Hi Fabby,
I did what you suggested and I tried the unconnected pins 0x12, 0x13, 0x18, 0x1a, 0x1b and 0x1d.
These were the pins that could be connected to the internal mic. With most of these pins the input device showed up in the audio settings, but none did work! The vu meter didn’t react on my voice or clapping hands.

I did another test and booted into the live system where the mic works. I installed the alsa-tools there and started hdajackretask to see if there’s something different: it’s absolutely the same as in my (regarding the mic) non working system. Here’s a screenshot:

Do you have a cheapo external USB microphone lying around and can you try that?

If not, I’m all out of ideas :sob: so let me call in our resident expert:

@nikgnomic Weird one: Ubuntu live with only ALSA microphone works on kernel 5.8. Manjaro on 5.10 and 5.4 with ALSA+PulseAudio nothing, but aplay does and at least 3 people seem to be having a problem.

Haven’t asked for an alsa-info.sh yet.

@aluedtke @momomacaroni can one of the 2 of you provide the output of:

alsa-info.sh 

(and if it downloads a new version, execute the new version and don’t give us the output that it just downloaded a new version, please? :rainbow: :unicorn: )

:upside_down_face: :thinking: