Before the entire computer freezes and I have to force a restart of the computer, the sound of the Youtube-video I currently watch (in Firefox) starts to stutter and repeat the last ~2s, image freezes and then shortly after (~5s) I cannot move the cursor and boom. Today I managed catch the whole thing early on and I could delay the inevitable by trying to play another part of the video and even closed the tab after that try - all in vain, about a minute later the system-wide freeze still occurred.
The strange thing is that sometimes I can watch Youtube literally for hours and it does fine, sometimes not even an hour - I do not know how to reproduce it.
I use “Enhancer for Youtube” if that matters.
Info about setup:
System:
Kernel: 5.4.101-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.4-x86_64
root=UUID=bd95ae15-5be9-4441-9382-8843ab34b89c ro quiet apparmor=1
security=apparmor resume=UUID=a93c7ed8-a3dd-4fb7-b42f-cc9c03ae2fba
udev.log_priority=3
Desktop: KDE Plasma 5.21.2 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine:
Type: Laptop System: ASUSTeK product: X550LB v: 1.0 serial: <filter>
Mobo: ASUSTeK model: X550LB v: 1.0 serial: <filter>
UEFI: American Megatrends v: X550LB.403 date: 06/26/2014
Battery:
ID-1: BAT0 charge: 36.2 Wh condition: 36.2/44.2 Wh (82%) volts: 14.4/14.4
model: ASUSTeK X550A30 type: Li-ion serial: N/A status: Full cycles: 432
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M560
serial: <filter> charge: 50% (should be ignored) rechargeable: yes
status: N/A
Memory:
RAM: total: 7.66 GiB used: 4.84 GiB (63.2%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Dual Core model: Intel Core i7-4500U bits: 64 type: MT MCP
arch: Haswell family: 6 model-id: 45 (69) stepping: 1 microcode: 26
L2 cache: 4 MiB bogomips: 19167
Speed: 1843 MHz min/max: 800/3000 MHz Core speeds (MHz): 1: 1843 2: 2149
3: 2172 4: 1852
Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2 bts
clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm
dts epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase
fxsr ht ibpb ibrs ida invpcid invpcid_single lahf_lm lm mca mce md_clear mmx
monitor movbe msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good
sdbg sep smep ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2
tpr_shadow tsc tsc_adjust tsc_deadline_timer vme vmx vnmi vpid xsave
xsaveopt xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: ASUSTeK driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:0a16 class ID: 0300
Device-2: NVIDIA GK208M [GeForce GT 740M] driver: N/A
alternate: nouveau, nvidia_drm, nvidia bus ID: 04:00.0 chip ID: 10de:1292
class ID: 0302
Device-3: Chicony USB2.0 HD UVC WebCam type: USB driver: uvcvideo
bus ID: 2-5:5 chip ID: 04f2:b40a class ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver:
loaded: intel display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 507x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: HDMI1 res: 1920x1080 hz: 60 dpi: 30 size: 1600x900mm (63.0x35.4")
diag: 1836mm (72.3")
OpenGL: renderer: Mesa DRI Intel HD Graphics 4400 (HSW GT2)
v: 4.5 Mesa 20.3.4 compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 00:03.0 chip ID: 8086:0a0c class ID: 0403
Device-2: Intel 8 Series HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 00:1b.0 chip ID: 8086:9c20 class ID: 0403
Sound Server: ALSA v: k5.4.101-1-MANJARO
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK driver: r8169 v: kernel port: e000 bus ID: 02:00.1
chip ID: 10ec:8168 class ID: 0200
IF: enp2s0f1 state: down mac: <filter>
Device-2: Qualcomm Atheros AR9485 Wireless Network Adapter
vendor: AzureWave AW-NE186H driver: ath9k v: kernel port: e000
bus ID: 03:00.0 chip ID: 168c:0032 class ID: 0280
IF: wlp3s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Message: No Bluetooth data was found.
RAID:
Message: No RAID data was found.
Drives:
Local Storage: total: 1.82 TiB used: 519.7 GiB (27.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM024 HN-M101MBB
size: 931.51 GiB block size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
rotation: 5400 rpm serial: <filter> rev: 0002 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Seagate
model: ST1000LM035-1RK172 size: 931.51 GiB block size: physical: 4096 B
logical: 512 B rotation: 5400 rpm serial: <filter> rev: 1053 scheme: MBR
Optical-1: /dev/sr0 vendor: Slimtype model: DVD A DA8A6SH rev: GAA2
dev-links: cdrom
Features: speed: 24 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
ID-1: / raw size: 49.61 GiB size: 48.58 GiB (97.93%) used: 25.88 GiB (53.3%)
fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
uuid: bd95ae15-5be9-4441-9382-8843ab34b89c
ID-2: /boot/efi raw size: 201 MiB size: 197.9 MiB (98.45%)
used: 298 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: A51E-0467
ID-3: /home raw size: 195.31 GiB size: 191.25 GiB (97.92%)
used: 95.27 GiB (49.8%) fs: ext4 dev: /dev/sda4 maj-min: 8:4 label: N/A
uuid: d2c718a1-d001-478a-8e2b-feee1c743f30
ID-4: /home/<filter>/HDD raw size: 931.51 GiB size: 915.89 GiB (98.32%)
used: 397.4 GiB (43.4%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: N/A
uuid: 6af0a9a8-cedc-4edb-8f06-01001277da20
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 2.8 GiB used: 1.15 GiB (41.1%)
priority: -2 dev: /dev/sda2 maj-min: 8:2 label: N/A
uuid: a93c7ed8-a3dd-4fb7-b42f-cc9c03ae2fba
Unmounted:
ID-1: /dev/sda5 maj-min: 8:5 size: 300 MiB fs: ntfs
label: Helyre\xc3\xa1ll\xc3\xadt\xc3\xa1s uuid: ECCAC404CAC3C8D2
ID-2: /dev/sda6 maj-min: 8:6 size: 100 MiB fs: vfat label: N/A
uuid: 30C6-3C76
ID-3: /dev/sda7 maj-min: 8:7 size: 128 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-4: /dev/sda8 maj-min: 8:8 size: 683.08 GiB fs: ntfs label: N/A
uuid: E68CC9208CC8EC5D
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900
Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
speed: 480 Mb/s chip ID: 8087:8000 class ID: 0900
Device-1: 1-1.3:3 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
chip ID: 046d:c52b class ID: 0300
Hub-3: 2-0:1 info: Full speed (or root) Hub ports: 9 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002 class ID: 0900
Hub-4: 2-1:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
chip ID: 05e3:0608 class ID: 0900
Device-1: 2-1.1:4 info: Corsair Gaming SCIMITAR PRO RGB Mouse
type: Mouse,HID driver: usbfs interfaces: 2 rev: 2.0 speed: 12 Mb/s
chip ID: 1b1c:1b3e class ID: 0300 serial: <filter>
Device-2: 2-1.2:6 info: Itron iONE RUSH Mechanical Keyboard
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s chip ID: 195d:2029 class ID: 0300
Device-3: 2-5:5 info: Chicony USB2.0 HD UVC WebCam type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04f2:b40a
class ID: 0e02 serial: <filter>
Hub-5: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip ID: 1d6b:0003 class ID: 0900
Device-1: 3-2:2 info: LaCie P9223 type: Mass Storage driver: uas
interfaces: 1 rev: 3.0 speed: 5 Gb/s chip ID: 059f:1070 class ID: 0806
serial: <filter>
Sensors:
System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2600
Info:
Processes: 193 Uptime: 9h 29m wakeups: 19 Init: systemd v: 247 Compilers:
gcc: 10.2.0 Packages: pacman: 1440 lib: 424 flatpak: 0 Shell: Zsh v: 5.8
running in: konsole inxi: 3.3.01
Fabby
14 March 2021 23:24
2
Welcome to Manjaro!
Please read this:
How to provide good information
and post some more information so we can see what’s really going on. Now we know the symptom of the disease, but we need some more probing to know where the origin lies…
An inxi --admin --verbosity=7 --filter --no-host --width
would be the minimum required information… (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
How do you do that?
P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which CPU/GPU or Kernel, … you have without typing it every time
1 Like
Wibol
15 March 2021 09:55
3
I had the same problem. The culprit was the Firefox add-on “Video DownloadHelper”. Disable it and see if the freezing stops.
I’m not aware of having that add-on.
output of sudo smartctl --all /dev/sda
is:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.16-1-MANJARO] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S2Y4J9FDA16083
LU WWN Device Id: 5 0004cf 20b93fb62
Firmware Version: 2AR20002
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Mar 22 10:46:53 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12960) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 216) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 6
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 086 025 Pre-fail Always - 3067
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3582
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 11208
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3570
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 550
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 058 000 Old_age Always - 34 (Min/Max 8/42)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 2191
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 309
225 Load_Cycle_Count 0x0032 092 092 000 Old_age Always - 86197
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6650 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
output of sudo smartctl --all /dev/sdb
is:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.16-1-MANJARO] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Mobile HDD
Device Model: ST1000LM035-1RK172
Serial Number: WGS0QTS1
LU WWN Device Id: 5 000c50 0ad26fe39
Firmware Version: SBM3
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Mar 22 10:51:34 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 159) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 064 006 Pre-fail Always - 65049581
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 424
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 068 060 045 Pre-fail Always - 6655750
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1253 (251 130 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 423
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 064 053 040 Old_age Always - 36 (Min/Max 23/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 231
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 424
194 Temperature_Celsius 0x0022 036 047 000 Old_age Always - 36 (0 17 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1252 (115 134 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2070055168
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2390522501
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Oh thanks for the tip! Probably I’m missing something but… REISUB doesn’t work. I press and hold alt+Sysreq
and type REISUB one key at a time but nothing happens (on my at the moment normally working pc).
free --human:
total used free shared buff/cache available
Mem: 7,7Gi 1,8Gi 3,8Gi 498Mi 2,0Gi 5,0Gi
Swap: 2,8Gi 0B 2,8Gi
But yeah, sometimes swap is in use but as far as I can tell, barely the half of it is used then.
for szFile in /proc/*/status ; do
awk '/VmSwap|Name/{printf $2 "\t" $3}END{ print "" }' "$szFile"
done | sort --key 2 --numeric --reverse | more
Output (after I just started my pc and read your reply):
zswap-shrink
zswap1
zswap1
zsh 0 kB
zsh 0 kB
zsh 0 kB
yakuake 0 kB
Xorg 0 kB
xfs_mru_cache
xfsalloc
xembedsniproxy 0 kB
writeback
wpa_supplicant 0 kB
WebExtensions 0 kB
Web Content0 kB
Web Content0 kB
Web Content0 kB
Web Content0 kB
watchdogd
upowerd 0 kB
udisksd 0 kB
uas
thunderbird 0 kB
tags.so 0 kB
systemd-udevd 0 kB
systemd-logind 0 kB
systemd-journal 0 kB
systemd 0 kB
systemd 0 kB
sudo 0 kB
startplasma-x11 0 kB
start_kdeinit 0 kB
sort 0 kB
(sd-pam) 0 kB
sddm-helper 0 kB
sddm 0 kB
scsi_tmf_4
scsi_tmf_3
scsi_tmf_2
scsi_tmf_1
scsi_tmf_0
scsi_eh_4
scsi_eh_3
scsi_eh_2
scsi_eh_1
scsi_eh_0
rtkit-daemon 0 kB
RDD Process0 kB
rcu_tasks_rude_
rcu_tasks_kthre
rcu_preempt
rcu_par_gp
rcu_gp
rcuc/3
rcuc/2
rcuc/1
rcuc/0
rcub/0
pulseaudio 0 kB
Privileged Cont0 kB
polkit-kde-auth 0 kB
polkitd 0 kB
plasmashell 0 kB
pamac-tray-plas 0 kB
org_kde_powerde 0 kB
oom_reaper
nvme-wq
nvme-reset-wq
nvme-delete-wq
NetworkManager 0 kB
netns
msm_kde_notifie 0 kB
ModemManager 0 kB
mm_percpu_wq
migration/3
migration/2
migration/1
migration/0
led_workqueue
kworker/u9:1-i915_flip
kworker/u9:0-i915-userptr-acquire
kworker/u8:3-asus_wireless_workqueue
kworker/u8:2
kworker/u8:1-events_unbound
kworker/u8:0-asus_wireless_workqueue
kworker/3:2-events
kworker/3:1H-kblockd
kworker/3:1-events
kworker/3:0H-kblockd
kworker/3:0-events
kworker/2:3-events
kworker/2:1H-kblockd
kworker/2:1-events
kworker/2:0-mm_percpu_wq
kworker/2:0H-kblockd
kworker/1:2-events
kworker/1:1H-kblockd
kworker/1:1-events
kworker/1:0H-kblockd
kworker/1:0-events
kworker/0:3-events
kworker/0:2-rcu_gp
kworker/0:1H-kblockd
kworker/0:0H
kwin_x11 0 kB
kwalletd5 0 kB
kthrotld
kthreadd
ksysguardd 0 kB
kswapd0
kstrp
ksoftirqd/3
ksoftirqd/2
ksoftirqd/1
ksoftirqd/0
ksmserver 0 kB
ksmd
kscreen_backend 0 kB
konsole 0 kB
klauncher 0 kB
kintegrityd
khungtaskd
khugepaged
kglobalaccel5 0 kB
kdevtmpfs
kdeinit5 0 kB
kded5 0 kB
kdeconnectd 0 kB
kcompactd0
kblockd
kauditd
kactivitymanage 0 kB
kaccess 0 kB
jfsSync
jfsIO
jfsCommit
jfsCommit
jfsCommit
jfsCommit
jbd2/sdb1-8
jbd2/sda4-8
jbd2/sda3-8
irq/47-mei_me
ipv6_addrconf
idle_inject/3
idle_inject/2
idle_inject/1
idle_inject/0
gvfsd-fuse 0 kB
gvfsd 0 kB
gsettings-helpe 0 kB
grub-probe 0 kB
grub-mkconfig 0 kB
gmenudbusmenupr 0 kB
firefox 0 kB
file.so 0 kB
file.so 0 kB
file.so 0 kB
ext4-rsv-conver
ext4-rsv-conver
ext4-rsv-conver
emacs 0 kB
edac-poller
dolphin 0 kB
devfreq_wq
dconf-service 0 kB
dbus-daemon 0 kB
dbus-daemon 0 kB
dbus-daemon 0 kB
cupsd 0 kB
cryptd
crond 0 kB
cpuhp/3
cpuhp/2
cpuhp/1
cpuhp/0
ckb-next-daemon 0 kB
ckb-next 0 kB
charger_manager
cfg80211
card0-crtc2
card0-crtc1
card0-crtc0
bumblebeed 0 kB
blkcg_punt_bio
bash 0 kB
baloo_file_extr 0 kB
baloo_file 0 kB
awk 0 kB
awk 0 kB
avahi-daemon 0 kB
avahi-daemon 0 kB
at-spi-bus-laun 0 kB
at-spi2-registr 0 kB
ath9k-hwrng
ata_sff
asus_wireless_w
agent 0 kB
acpi_thermal_pm
Regarding REISUB, I forgot to edit the grub file. Thanks for pointing it out.
1 Like
Fabby
24 March 2021 00:17
10
You’re using zswap already!
So that’s not it!
Please provide the output of:
journalctl --system --boot=-1 | tail --lines=50
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-disk-by\x2did-ata\x2dST1000LM024_HN\x2dM101MBB_S2Y4J9FDA16083\x2dpart2.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/disk/by-id/ata-ST1000LM024_HN-M101MBB_S2Y4J9FDA16083-part2.
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-disk-by\x2dpath-pci\x2d0000:00:1f.2\x2data\x2d1\x2dpart2.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/disk/by-path/pci-0000:00:1f.2-ata-1-part2.
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-disk-by\x2did-wwn\x2d0x50004cf20b93fb62\x2dpart2.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/disk/by-id/wwn-0x50004cf20b93fb62-part2.
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-disk-by\x2dpath-pci\x2d0000:00:1f.2\x2data\x2d1.0\x2dpart2.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0-part2.
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-disk-by\x2dpartuuid-4219f3d3\x2d5ecc\x2dda49\x2d8d42\x2d9d20004d1de6.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/disk/by-partuuid/4219f3d3-5ecc-da49-8d42-9d20004d1de6.
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-sda2.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/sda2.
Mär 23 21:01:51 pfu-laptop systemd[1]: dev-disk-by\x2duuid-a93c7ed8\x2da3dd\x2d4fb7\x2db42f\x2dcc9c03ae2fba.swap: Succeeded.
Mär 23 21:01:51 pfu-laptop systemd[1]: Deactivated swap /dev/disk/by-uuid/a93c7ed8-a3dd-4fb7-b42f-cc9c03ae2fba.
Mär 23 21:01:52 pfu-laptop systemd[1]: home.mount: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Unmounted /home.
Mär 23 21:01:52 pfu-laptop systemd[1]: Reached target Unmount All Filesystems.
Mär 23 21:01:52 pfu-laptop systemd[1]: systemd-fsck@dev-disk-by\x2duuid-d2c718a1\x2dd001\x2d478a\x2d8e2b\x2dfeee1c743f30.service: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopped File System Check on /dev/disk/by-uuid/d2c718a1-d001-478a-8e2b-feee1c743f30.
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-fsck@dev-disk-by\x2duuid-d2c718a1\x2dd001\x2d478a\x2d8e2b\x2d
feee1c743f30 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop systemd[1]: Removed slice system-systemd\x2dfsck.slice.
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopped target Local File Systems (Pre).
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopping Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Mär 23 21:01:52 pfu-laptop systemd[1]: systemd-remount-fs.service: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopped Remount Root and Kernel File Systems.
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" host
name=? addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop systemd[1]: systemd-fsck-root.service: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopped File System Check on Root Device.
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostn
ame=? addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop systemd[1]: systemd-tmpfiles-setup-dev.service: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopped Create Static Device Nodes in /dev.
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/syste
md" hostname=? addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop systemd[1]: lvm2-monitor.service: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Stopped Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=?
addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop systemd[1]: Reached target Shutdown.
Mär 23 21:01:52 pfu-laptop systemd[1]: Reached target Final Step.
Mär 23 21:01:52 pfu-laptop systemd[1]: systemd-poweroff.service: Succeeded.
Mär 23 21:01:52 pfu-laptop systemd[1]: Finished Power-Off.
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_START pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-poweroff comm="systemd" exe="/usr/lib/systemd/systemd" hostn
ame=? addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop audit[1]: SERVICE_STOP pid=1 uid=0 auid=4294967295 ses=4294967295 subj==unconfined msg='unit=systemd-poweroff comm="systemd" exe="/usr/lib/systemd/systemd" hostna
me=? addr=? terminal=? res=success'
Mär 23 21:01:52 pfu-laptop systemd[1]: Reached target Power-Off.
Mär 23 21:01:52 pfu-laptop systemd[1]: Shutting down.
Mär 23 21:01:52 pfu-laptop audit: BPF prog-id=23 op=UNLOAD
Mär 23 21:01:52 pfu-laptop audit: BPF prog-id=22 op=UNLOAD
Mär 23 21:01:52 pfu-laptop audit: BPF prog-id=25 op=UNLOAD
Mär 23 21:01:52 pfu-laptop audit: BPF prog-id=24 op=UNLOAD
Mär 23 21:01:52 pfu-laptop systemd-shutdown[1]: Syncing filesystems and block devices.
Mär 23 21:01:52 pfu-laptop systemd-shutdown[1]: Sending SIGTERM to remaining processes...
Mär 23 21:01:52 pfu-laptop systemd-journald[232]: Journal stopped
Fabby
24 March 2021 10:45
12
journalctl --system --boot=-1 | tail --lines=150
please as it doesn’t contain any pertinent information.
Please REISUB as soon as possible after your system runs into the problem to keep the log files small…
Oddly enough, since I posted here, the issue has never occurred again and I used REISUB as a test only. Should I still post journalctl --system --boot=-1 | tail --lines=150
?
Fabby
24 March 2021 22:39
14
Nah… If it re-occurs post another message (leaving this thread open)