KDE apps wont autostart after some of the latest system updates

Support KDE Plasma
1

It has been about a couple of weeks since my applications like Konsole, qBittorrent, Yakuake stopped starting after a system reboot. Before that 3+ years of using Manjero everything was fine.

Better explanation: Let’s say I open qBittorrent. Then I reboot the system, then I should see that qBittorrent is running, but no, it was not running. It’s the same with the other apps I’ve mentioned. It looks like some autorun script is stuck

How this can be fixed?

inxi --admin --verbosity=7 --filter --no-host --width vvv

Спойлер 
System:
  Kernel: 5.10.60-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 
  root=UUID=1e5af369-7fe5-4a56-a87b-30682a36c231 rw quiet 
  Desktop: KDE Plasma 5.22.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Desktop Mobo: Micro-Star model: B350 PC MATE (MS-7A34) v: 2.0 
  serial: <filter> UEFI: American Megatrends v: A.E0 date: 05/02/2018 
Battery:
  Message: No system battery data found. Is one present? 
Memory:
  RAM: total: 31.37 GiB used: 10.47 GiB (33.4%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ 
  family: 17 (23) model-id: 8 stepping: 2 microcode: 800820D cache: L2: 3 MiB 
  bogomips: 81617 
  Speed: 3109 MHz min/max: N/A Core speeds (MHz): 1: 3109 2: 2448 3: 2860 
  4: 3405 5: 3031 6: 2739 7: 2248 8: 2494 9: 2332 10: 2350 11: 3899 12: 3785 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid 
  cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid 
  fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm mca 
  mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl 
  npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb 
  perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36 
  rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme 
  smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock syscall tce 
  topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt 
  xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP: 
  disabled, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 470.63.01 
  alternate: nouveau,nvidia_drm bus-ID: 22:00.0 chip-ID: 10de:1c82 
  class-ID: 0300 
  Device-2: Logitech Webcam C300 type: USB driver: snd-usb-audio,uvcvideo 
  bus-ID: 3-2:3 chip-ID: 046d:0805 class-ID: 0102 serial: <filter> 
  Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: 
  loaded: nvidia display-ID: :0 screens: 1 
  Screen-1: 0 s-res: 3440x1440 s-dpi: 109 s-size: 802x333mm (31.6x13.1") 
  s-diag: 868mm (34.2") 
  Monitor-1: DP-0 res: 3440x1440 hz: 100 dpi: 110 size: 797x333mm (31.4x13.1") 
  diag: 864mm (34") 
  OpenGL: renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2 
  v: 4.6.0 NVIDIA 470.63.01 direct render: Yes 
Audio:
  Device-1: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel 
  v: kernel bus-ID: 22:00.1 chip-ID: 10de:0fb9 class-ID: 0403 
  Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI 
  driver: snd_hda_intel v: kernel bus-ID: 24:00.3 chip-ID: 1022:1457 
  class-ID: 0403 
  Device-3: Logitech Webcam C300 type: USB driver: snd-usb-audio,uvcvideo 
  bus-ID: 3-2:3 chip-ID: 046d:0805 class-ID: 0102 serial: <filter> 
  Sound Server-1: ALSA v: k5.10.60-1-MANJARO running: yes 
  Sound Server-2: sndio v: N/A running: no 
  Sound Server-3: JACK v: 1.9.19 running: no 
  Sound Server-4: PulseAudio v: 15.0 running: yes 
  Sound Server-5: PipeWire v: 0.3.33 running: yes 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Micro-Star MSI driver: r8168 v: 8.049.02-NAPI modules: r8169 
  port: e000 bus-ID: 1e:00.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: enp30s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: noprefixroute scope: link 
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: TP-LINK TG-3468 driver: r8168 v: 8.049.02-NAPI modules: r8169 
  port: d000 bus-ID: 20:00.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: enp32s0 state: down mac: <filter> 
  Device-3: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: d000 
  bus-ID: 21:00.0 chip-ID: 8086:2723 class-ID: 0280 
  IF: wlp33s0 state: down mac: <filter> 
  IF-ID-1: br-9f825b4e70d4 state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IF-ID-2: br-a8cfc1843fe8 state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IF-ID-3: br-bf6630ed21f0 state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IF-ID-4: docker0 state: up speed: 10000 Mbps duplex: unknown mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IP v6: <filter> scope: link 
  IF-ID-5: docker_gwbridge state: down mac: <filter> 
  IP v4: <filter> scope: global broadcast: <filter> 
  IF-ID-6: veth6861c2c state: up speed: 10000 Mbps duplex: full mac: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-5:2 
  chip-ID: 8087:0029 class-ID: e001 
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running 
  rfk-block: hardware: no software: yes address: see --recommends 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 3.3 TiB used: 2.24 TiB (67.8%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3500418AS 
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s 
  type: HDD rpm: 7200 serial: <filter> rev: CC38 scheme: GPT 
  ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000NM0033-9ZM173 
  size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s 
  type: HDD rpm: 7200 serial: <filter> rev: SN04 scheme: GPT 
  ID-3: /dev/sdc maj-min: 8:32 vendor: A-Data model: SP600 size: 119.24 GiB 
  block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD 
  serial: <filter> rev: 5.2 scheme: GPT 
  ID-4: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST2000DM001-9YN164 
  size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s 
  type: HDD rpm: 7200 serial: <filter> rev: CC4B scheme: GPT 
  Message: No optical or floppy data found. 
Partition:
  ID-1: / raw-size: 48.83 GiB size: 47.81 GiB (97.92%) used: 40.69 GiB (85.1%) 
  fs: ext4 dev: /dev/sdc2 maj-min: 8:34 label: N/A 
  uuid: 1e5af369-7fe5-4a56-a87b-30682a36c231 
  ID-2: /boot/efi raw-size: 200 MiB size: 196.9 MiB (98.45%) 
  used: 246 KiB (0.1%) fs: vfat dev: /dev/sdc1 maj-min: 8:33 label: N/A 
  uuid: 8136-E235 
  ID-3: /home raw-size: 70.22 GiB size: 68.61 GiB (97.72%) 
  used: 50.51 GiB (73.6%) fs: ext4 dev: /dev/sdc3 maj-min: 8:35 label: N/A 
  uuid: a0856727-b6d8-4036-9c05-1a90029f8373 
  ID-4: /home/storage raw-size: 931.51 GiB size: 915.89 GiB (98.32%) 
  used: 797.69 GiB (87.1%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: N/A 
  uuid: 66e99fec-4572-440f-b349-1f2433312a8b 
  ID-5: /home/storage2 raw-size: 1.82 TiB size: 1.79 TiB (98.38%) 
  used: 1.37 TiB (76.5%) fs: ext4 dev: /dev/sdd1 maj-min: 8:49 
  label: Storage 2 uuid: b5d9a8f0-39f6-43ab-934e-0922764479f0 
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 19.53 GiB used: 0 KiB (0.0%) priority: -2 
  dev: /dev/sda5 maj-min: 8:5 label: N/A 
  uuid: b2d6198c-6e1f-4ea6-b17c-814c80344c69 
Unmounted:
  ID-1: /dev/sda1 maj-min: 8:1 size: 100 MiB fs: vfat label: N/A 
  uuid: 6C17-F956 
  ID-2: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: <superuser required> 
  label: N/A uuid: N/A 
  ID-3: /dev/sda3 maj-min: 8:3 size: 445.62 GiB fs: ntfs label: N/A 
  uuid: 3A2821072820C3AB 
  ID-4: /dev/sda4 maj-min: 8:4 size: 510 MiB fs: ntfs label: N/A 
  uuid: ACCA022FCA01F5FC 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 1-5:2 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb 
  interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 
  class-ID: e001 
  Device-2: 1-8:3 info: Microsoft Microsoft SiderWinderTM X6 Keyboard 
  type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
  speed: 12 Mb/s power: 500mA chip-ID: 045e:074b class-ID: 0300 
  Device-3: 1-9:4 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s 
  power: 98mA chip-ID: 046d:c069 class-ID: 0301 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 3-1:2 info: ROCCAT Kave Headset type: HID 
  driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s 
  power: 100mA chip-ID: 1e7d:38a4 class-ID: 0301 
  Device-2: 3-2:3 info: Logitech Webcam C300 type: Video,Audio 
  driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s 
  power: 500mA chip-ID: 046d:0805 class-ID: 0102 serial: <filter> 
  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 40.2 C mobo: N/A gpu: nvidia temp: 42 C 
  Fan Speeds (RPM): N/A gpu: nvidia fan: 20% 
Info:
  Processes: 375 Uptime: 38m wakeups: 0 Init: systemd v: 248 tool: systemctl 
  Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1670 lib: 460 
  flatpak: 0 Shell: Bash v: 5.1.8 running-in: konsole inxi: 3.3.06
1 Like
2

:+1: Welcome to Manjaro! :+1:

  1. Please read this:
    How to provide good information
    and press the three dots … below your post and press the :pencil2: to give us more information so we can see what’s really going on.
    Now we know the symptom of the disease, but we need some more probing to know where the origin lies… :grin:
  2. An inxi --admin --verbosity=7 --filter --no-host --width would be the minimum required information for us to be able to help you. (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
    Also, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text.

:+1:

P.S. If you want to notify me that you did provide this information, please :heart: this message and I’ll come back and have another look.
P.P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which exact CPU/GPU or Kernel, … you have without typing it every time

1 Like
3
  • Open System Settings
  • Type desktop se
  • Click Desktop Session
  • Ensure the When logging in: is set to Restore previous saved sesstion like in below screenshot.
    2021-09-02_10-18
    2021-09-02_10-181191×468 53.4 KB

and if that wouldn’t work, try the manual option.

:crossed_fingers:

4

WOW! That helped!

Thanks a lot! Silly mistake

1 Like
5

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.