It has been about a couple of weeks since my applications like Konsole, qBittorrent, Yakuake stopped starting after a system reboot. Before that 3+ years of using Manjero everything was fine.
Better explanation: Let’s say I open qBittorrent
. Then I reboot the system, then I should see that qBittorrent
is running, but no, it was not running. It’s the same with the other apps I’ve mentioned. It looks like some autorun script is stuck
How this can be fixed?
inxi --admin --verbosity=7 --filter --no-host --width
vvv
Спойлер
System:
Kernel: 5.10.60-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64
root=UUID=1e5af369-7fe5-4a56-a87b-30682a36c231 rw quiet
Desktop: KDE Plasma 5.22.4 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: B350 PC MATE (MS-7A34) v: 2.0
serial: <filter> UEFI: American Megatrends v: A.E0 date: 05/02/2018
Battery:
Message: No system battery data found. Is one present?
Memory:
RAM: total: 31.37 GiB used: 10.47 GiB (33.4%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+
family: 17 (23) model-id: 8 stepping: 2 microcode: 800820D cache: L2: 3 MiB
bogomips: 81617
Speed: 3109 MHz min/max: N/A Core speeds (MHz): 1: 3109 2: 2448 3: 2860
4: 3405 5: 3031 6: 2739 7: 2248 8: 2494 9: 2332 10: 2350 11: 3899 12: 3785
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid
cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm mca
mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl
npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36
rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme
smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock syscall tce
topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nvidia v: 470.63.01
alternate: nouveau,nvidia_drm bus-ID: 22:00.0 chip-ID: 10de:1c82
class-ID: 0300
Device-2: Logitech Webcam C300 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 3-2:3 chip-ID: 046d:0805 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver:
loaded: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 3440x1440 s-dpi: 109 s-size: 802x333mm (31.6x13.1")
s-diag: 868mm (34.2")
Monitor-1: DP-0 res: 3440x1440 hz: 100 dpi: 110 size: 797x333mm (31.4x13.1")
diag: 864mm (34")
OpenGL: renderer: NVIDIA GeForce GTX 1050 Ti/PCIe/SSE2
v: 4.6.0 NVIDIA 470.63.01 direct render: Yes
Audio:
Device-1: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
v: kernel bus-ID: 22:00.1 chip-ID: 10de:0fb9 class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus-ID: 24:00.3 chip-ID: 1022:1457
class-ID: 0403
Device-3: Logitech Webcam C300 type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 3-2:3 chip-ID: 046d:0805 class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.60-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 15.0 running: yes
Sound Server-5: PipeWire v: 0.3.33 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8168 v: 8.049.02-NAPI modules: r8169
port: e000 bus-ID: 1e:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp30s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: TP-LINK TG-3468 driver: r8168 v: 8.049.02-NAPI modules: r8169
port: d000 bus-ID: 20:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp32s0 state: down mac: <filter>
Device-3: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: d000
bus-ID: 21:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp33s0 state: down mac: <filter>
IF-ID-1: br-9f825b4e70d4 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-2: br-a8cfc1843fe8 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-3: br-bf6630ed21f0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-4: docker0 state: up speed: 10000 Mbps duplex: unknown mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IP v6: <filter> scope: link
IF-ID-5: docker_gwbridge state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
IF-ID-6: veth6861c2c state: up speed: 10000 Mbps duplex: full mac: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-5:2
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 3.3 TiB used: 2.24 TiB (67.8%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3500418AS
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: CC38 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000NM0033-9ZM173
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: SN04 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: A-Data model: SP600 size: 119.24 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD
serial: <filter> rev: 5.2 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Seagate model: ST2000DM001-9YN164
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: CC4B scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 48.83 GiB size: 47.81 GiB (97.92%) used: 40.69 GiB (85.1%)
fs: ext4 dev: /dev/sdc2 maj-min: 8:34 label: N/A
uuid: 1e5af369-7fe5-4a56-a87b-30682a36c231
ID-2: /boot/efi raw-size: 200 MiB size: 196.9 MiB (98.45%)
used: 246 KiB (0.1%) fs: vfat dev: /dev/sdc1 maj-min: 8:33 label: N/A
uuid: 8136-E235
ID-3: /home raw-size: 70.22 GiB size: 68.61 GiB (97.72%)
used: 50.51 GiB (73.6%) fs: ext4 dev: /dev/sdc3 maj-min: 8:35 label: N/A
uuid: a0856727-b6d8-4036-9c05-1a90029f8373
ID-4: /home/storage raw-size: 931.51 GiB size: 915.89 GiB (98.32%)
used: 797.69 GiB (87.1%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: N/A
uuid: 66e99fec-4572-440f-b349-1f2433312a8b
ID-5: /home/storage2 raw-size: 1.82 TiB size: 1.79 TiB (98.38%)
used: 1.37 TiB (76.5%) fs: ext4 dev: /dev/sdd1 maj-min: 8:49
label: Storage 2 uuid: b5d9a8f0-39f6-43ab-934e-0922764479f0
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 19.53 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda5 maj-min: 8:5 label: N/A
uuid: b2d6198c-6e1f-4ea6-b17c-814c80344c69
Unmounted:
ID-1: /dev/sda1 maj-min: 8:1 size: 100 MiB fs: vfat label: N/A
uuid: 6C17-F956
ID-2: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/sda3 maj-min: 8:3 size: 445.62 GiB fs: ntfs label: N/A
uuid: 3A2821072820C3AB
ID-4: /dev/sda4 maj-min: 8:4 size: 510 MiB fs: ntfs label: N/A
uuid: ACCA022FCA01F5FC
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-5:2 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029
class-ID: e001
Device-2: 1-8:3 info: Microsoft Microsoft SiderWinderTM X6 Keyboard
type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0
speed: 12 Mb/s power: 500mA chip-ID: 045e:074b class-ID: 0300
Device-3: 1-9:4 info: Logitech M-U0007 [Corded Mouse M500] type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
power: 98mA chip-ID: 046d:c069 class-ID: 0301
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-1:2 info: ROCCAT Kave Headset type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
power: 100mA chip-ID: 1e7d:38a4 class-ID: 0301
Device-2: 3-2:3 info: Logitech Webcam C300 type: Video,Audio
driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
power: 500mA chip-ID: 046d:0805 class-ID: 0102 serial: <filter>
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 40.2 C mobo: N/A gpu: nvidia temp: 42 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 20%
Info:
Processes: 375 Uptime: 38m wakeups: 0 Init: systemd v: 248 tool: systemctl
Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1670 lib: 460
flatpak: 0 Shell: Bash v: 5.1.8 running-in: konsole inxi: 3.3.06