Hi everyone , I am completely new to this forum and linux. I am using Manjaro KDE in my DELL Vostro 3491 laptop. This is the output i got for $ inxi --full --verbosity=7 --filter --no-host
System: Kernel: 5.10.53-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 Desktop: KDE Plasma 5.22.4 tk: Qt 5.15.2
wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine: Type: Laptop System: Dell product: Vostro 3491 v: N/A serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: Dell model: 02P5GF v: A00 serial: <filter> UEFI: Dell v: 1.13.0 date: 11/13/2020
Battery: ID-1: BAT0 charge: 22.4 Wh (61.9%) condition: 36.2/42.0 Wh (86.1%) volts: 11.6 min: 11.4
model: SWD-ATL3.618 DELL WJPC407 type: Li-ion serial: <filter> status: Discharging
Memory: RAM: total: 7.54 GiB used: 3.01 GiB (40.0%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU: Info: Quad Core model: Intel Core i5-1035G1 bits: 64 type: MT MCP arch: Ice Lake rev: 5 cache: L2: 6 MiB
bogomips: 19048
Speed: 1101 MHz min/max: 400/3600 MHz Core speeds (MHz): 1: 1101 2: 1101 3: 1102 4: 1101 5: 1100 6: 1101 7: 1100
8: 1101
Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_capabilities arch_perfmon art avx avx2
avx512_bitalg avx512_vbmi2 avx512_vnni avx512_vpopcntdq avx512bw avx512cd avx512dq avx512f avx512ifma avx512vbmi
avx512vl bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts
epb ept ept_ad erms est f16c flexpriority flush_l1d fma fpu fsgsbase fsrm fxsr gfni ht hwp hwp_act_window hwp_epp
hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida intel_pt invpcid invpcid_single lahf_lm lm mca mce md_clear mmx
monitor movbe msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pku pln pni
popcnt pse pse36 pts rdpid rdrand rdseed rdtscp rep_good sdbg sep sha_ni smap smep split_lock_detect ss ssbd sse
sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip vaes
vme vmx vnmi vpclmulqdq vpid x2apic xgetbv1 xsave xsavec xsaveopt xsaves xtopology xtpr
Graphics: Device-1: Intel Iris Plus Graphics G1 vendor: Dell driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:8a56
class-ID: 0300
Device-2: Realtek Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 1-6:3 chip-ID: 0bda:5675 class-ID: 0e02
serial: <filter>
Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver: loaded: intel unloaded: modesetting
alternate: fbdev,vesa s-res: 1920x1080 s-dpi: 96
OpenGL: renderer: Mesa Intel UHD Graphics (ICL GT1) v: 4.6 Mesa 21.1.5 direct render: Yes
Audio: Device-1: Intel Ice Lake-LP Smart Sound Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
chip-ID: 8086:34c8 class-ID: 0403
Sound Server-1: ALSA v: k5.10.53-1-MANJARO running: yes
Sound Server-2: sndio v: N/A running: no
Sound Server-3: JACK v: 1.9.19 running: no
Sound Server-4: PulseAudio v: 14.2 running: yes
Sound Server-5: PipeWire v: 0.3.32 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Dell driver: r8169 v: kernel port: 3000
bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0 state: down mac: <filter>
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Dell driver: ath10k_pci v: kernel
port: 3000 bus-ID: 02:00.0 chip-ID: 168c:0042 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth: Device-1: Qualcomm Atheros type: USB driver: btusb v: 0.8 bus-ID: 1-10:4 chip-ID: 0cf3:e009 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running rfk-block: hardware: no software: yes
address: see --recommends
Logical: Message: No logical block device data found.
RAID: Message: No RAID data found.
Drives: Local Storage: total: 1.14 TiB used: 38.92 GiB (3.3%)
ID-1: /dev/nvme0n1 model: CL1-3D256-Q11 NVMe SSSTC 256GB size: 238.47 GiB speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 22301114 temp: 35.9 C scheme: GPT
ID-2: /dev/sda vendor: Seagate model: ST1000LM049-2GH172 size: 931.51 GiB speed: 6.0 Gb/s type: HDD rpm: 7200
serial: <filter> rev: SDM2 scheme: GPT
Message: No optical or floppy data found.
Partition: ID-1: / size: 233.38 GiB used: 17.11 GiB (7.3%) fs: ext4 dev: /dev/nvme0n1p2 label: N/A
uuid: 3e5b22d8-9c7d-49ce-931b-9de17e9a039b
ID-2: /boot/efi size: 299.4 MiB used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 label: NO_LABEL uuid: B137-A015
ID-3: /run/media/kathir7/DATA size: 931.39 GiB used: 21.81 GiB (2.3%) fs: ntfs dev: /dev/sda2 label: DATA
uuid: B8DA480CDA47C57A
Swap: Alert: No swap data was found.
Unmounted: ID-1: /dev/sda1 size: 128 MiB fs: <superuser required> label: N/A uuid: N/A
USB: Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 12 rev: 2.0 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-5:2 info: Shenzhen Goodix Fingerprint Reader type: Abstract (modem),CDC-Data driver: cdc_acm
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 27c6:5301 class-ID: 0a00 serial: <filter>
Device-2: 1-6:3 info: Realtek Integrated_Webcam_HD type: Video driver: uvcvideo interfaces: 2 rev: 2.0
speed: 480 Mb/s power: 500mA chip-ID: 0bda:5675 class-ID: 0e02 serial: <filter>
Device-3: 1-10:4 info: Qualcomm Atheros type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
power: 100mA chip-ID: 0cf3:e009 class-ID: e001
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900
Sensors: System Temperatures: cpu: 53.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2539
Info: Processes: 231 Uptime: 41m wakeups: 1 Init: systemd v: 248 Compilers: gcc: 11.1.0 Packages: pacman: 1154
Shell: Bash v: 5.1.8 running-in: konsole inxi: 3.3.06
The issue is whenever i try to screen share either in teams app or in a google meet , it shares some rando previous instances of the screen .Even though i had closed all other windows it shares some previous instance of the screen . By previous instance i mean that , if i had previously opened a document on okular and closed it .While screen sharing the screen i had at the time of viewing the document is shared.I am a college student and am attending online classes , so screen sharing is really important for me. Any help is appreciated.