Internet stops working after updating to 21.2

After updating to the latest version, Manjaro 21.2 (Qonos) the internet just stops working a couple of days later. I rolled back the update and then tried after a couple of days, but still, the same thing is happening. Right after the updating, it works fine but I don’t know what causes it suddenly stop working, where should I look for clues?

INXI
enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 131.151.79.250  netmask 255.255.252.0  broadcast 131.151.79.255
        inet6 fe80::8da1:daea:b347:8636  prefixlen 64  scopeid 0x20<link>
        ether f4:8e:38:e8:03:f7  txqueuelen 1000  (Ethernet)
        RX packets 2811  bytes 217341 (212.2 KiB)
        RX errors 0  dropped 9  overruns 0  frame 0
        TX packets 63  bytes 8018 (7.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 408  bytes 34575 (33.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 408  bytes 34575 (33.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp5s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.106.43.108  netmask 255.255.254.0  broadcast 10.106.43.255
        inet6 fe80::cd86:21a7:ff46:b72d  prefixlen 64  scopeid 0x20<link>
        ether ac:2b:6e:88:33:03  txqueuelen 1000  (Ethernet)
        RX packets 1552188  bytes 207335774 (197.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2577790  bytes 3701700529 (3.4 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

System:
  Kernel: 5.14.10-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.14-x86_64
  root=UUID=289e43c6-5a12-4548-b53b-0927e72f0eaa ro apparmor=1
  security=apparmor udev.log_priority=3 sysrq_always_enabled=1
  Desktop: GNOME 40.5 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 40.0
  Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Dell product: Inspiron 7559 v: 1.3.1 serial: <filter>
  Chassis: type: 10 serial: <filter>
  Mobo: Dell model: 0H0CC0 v: A00 serial: <filter> UEFI: Dell v: 1.3.1
  date: 12/02/2018
Battery:
  ID-1: BAT0 charge: 57.2 Wh (100.0%) condition: 57.2/76.1 Wh (75.1%)
  volts: 12.8 min: 11.4 model: Dell type: Unknown serial: <filter>
  status: Full
Memory:
  RAM: total: 15.49 GiB used: 2.35 GiB (15.2%)
  RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: Quad Core model: Intel Core i7-6700HQ bits: 64 type: MT MCP
  arch: Skylake-S family: 6 model-id: 5E (94) stepping: 3 microcode: EA cache:
  L2: 6 MiB bogomips: 41621
  Speed: 810 MHz min/max: 800/3500 MHz Core speeds (MHz): 1: 810 2: 800 3: 813
  4: 829 5: 835 6: 802 7: 824 8: 800
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon art
  avx avx2 bmi1 bmi2 bts clflush clflushopt cmov constant_tsc cpuid
  cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
  f16c flexpriority flush_l1d fma fpu fsgsbase fxsr ht hwp hwp_act_window
  hwp_epp hwp_notify ibpb ibrs ida intel_pt invpcid invpcid_single lahf_lm lm
  mca mce md_clear mmx monitor movbe mpx msr mtrr nonstop_tsc nopl nx pae pat
  pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti pts
  rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2 sse4_1
  sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust
  tsc_deadline_timer vme vmx vnmi vpid x2apic xgetbv1 xsave xsavec xsaveopt
  xsaves xtopology xtpr
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
  mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
  mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
  IBRS_FW, STIBP: conditional, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort mitigation: TSX disabled
Graphics:
  Device-1: Intel HD Graphics 530 vendor: Dell driver: i915 v: kernel
  bus-ID: 00:02.0 chip-ID: 8086:191b class-ID: 0300
  Device-2: NVIDIA GM107M [GeForce GTX 960M] vendor: Dell driver: nvidia
  v: 470.63.01 alternate: nouveau,nvidia_drm bus-ID: 02:00.0
  chip-ID: 10de:139b class-ID: 0302
  Device-3: Sunplus Innovation Integrated_Webcam_HD type: USB driver: uvcvideo
  bus-ID: 1-4:3 chip-ID: 1bcf:28b0 class-ID: 0e02
  Display: x11 server: X.org 1.20.13 compositor: gnome-shell driver:
  loaded: modesetting,nvidia resolution: <missing: xdpyinfo>
  OpenGL: renderer: NVIDIA GeForce GTX 960M/PCIe/SSE2
  v: 4.6.0 NVIDIA 470.63.01 direct render: Yes
Audio:
  Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Dell
  driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170
  class-ID: 0403
  Sound Server-1: ALSA v: k5.14.10-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.38 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  vendor: Dell driver: r8169 v: kernel port: d000 bus-ID: 04:00.0
  chip-ID: 10ec:8168 class-ID: 0200
  IF: enp4s0 state: down mac: <filter>
  Device-2: Intel Wireless 3165 driver: iwlwifi v: kernel bus-ID: 05:00.0
  chip-ID: 8086:3165 class-ID: 0280
  IF: wlp5s0 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
  broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
  bus-ID: 1-5:4 chip-ID: 8087:0a2a class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 577.55 GiB used: 215 GiB (37.2%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Transcend model: TS120GMTS820S
  size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
  type: SSD serial: <filter> rev: 0A0 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WDS500G2B0A
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
  type: SSD serial: <filter> rev: 90WD scheme: GPT
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 94.5 GiB size: 92.46 GiB (97.84%) used: 61.81 GiB (66.9%)
  fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A
  uuid: 289e43c6-5a12-4548-b53b-0927e72f0eaa
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
  used: 25.6 MiB (8.6%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A
  uuid: C5B2-14B8
  ID-3: /home raw-size: 200 GiB size: 195.8 GiB (97.90%)
  used: 153.17 GiB (78.2%) fs: ext4 dev: /dev/sdb3 maj-min: 8:19 label: N/A
  uuid: 671243e1-17bc-4741-893f-13ef242b7872
Swap:
  Kernel: swappiness: 10 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 17 GiB used: 0 KiB (0.0%) priority: -2
  dev: /dev/sda2 maj-min: 8:2 label: N/A
  uuid: 95ed6940-cc2b-4518-a7b7-a7918d207e57
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 16 MiB fs: <superuser required>
  label: N/A uuid: N/A
  ID-2: /dev/sdb2 maj-min: 8:18 size: 265.75 GiB fs: ntfs label: N/A
  uuid: 923499A234998A3D
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 16 rev: 2.0
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-2:2 info: Lenovo 300 Wireless Compact Mouse type: Mouse
  driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s power: 98mA
  chip-ID: 17ef:60ac class-ID: 0301
  Device-2: 1-3:5 info: Apple Aluminium Keyboard (ANSI) type: Keyboard,Mouse
  driver: apple,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
  chip-ID: 05ac:024f class-ID: 0301
  Device-3: 1-4:3 info: Sunplus Innovation Integrated_Webcam_HD type: Video
  driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
  chip-ID: 1bcf:28b0 class-ID: 0e02
  Device-4: 1-5:4 info: Intel Bluetooth wireless interface type: Bluetooth
  driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
  chip-ID: 8087:0a2a class-ID: e001
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s
  chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
  System Temperatures: cpu: 54.0 C mobo: 29.8 C sodimm: SODIMM C gpu: nvidia
  temp: 54 C
  Fan Speeds (RPM): cpu: 0
Info:
  Processes: 274 Uptime: 2h 2m wakeups: 1 Init: systemd v: 249 tool: systemctl
  Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: 1721 pacman: 1688 lib: 426
  flatpak: 23 snap: 10 Shell: Zsh v: 5.8 running-in: gnome-terminal
  inxi: 3.3.08

Then I doubt your issue has anything to do with the update.

Logs are always a good place to start, check your journal for errors since last boot when this happens:

$ journalctl -b -p err
1 Like

I have updated twice and rolled back twice. And before this update I never faced this kind of issue in any distro I have used. So I thought there was a issue with the update.