I can't install Manjaro

I already had Manjaro KDE, but I deleted it. At that time, the system was not install due to the fact that he could not make disk partitions, but I tried a second time and the system was installed.
Now it’s the same, every time there are different errors related to disk partitions, but this time it has not been installed since more than 20 attempts.

I’m tired, please help me.

System:
  Kernel: 5.15.28-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
    misobasedir=manjaro misolabel=MANJARO_KDE_2125 quiet systemd.show_status=1
    apparmor=1 security=apparmor driver=free nouveau.modeset=1 i915.modeset=1
    radeon.modeset=1
  Desktop: KDE Plasma 5.24.3 tk: Qt 5.15.3 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop Mobo: Micro-Star model: B450 TOMAHAWK MAX (MS-7C02) v: 1.0
    serial: <superuser required> UEFI: American Megatrends v: 3.70
    date: 06/09/2020
Battery:
  Message: No system battery data found. Is one present?
Memory:
  RAM: total: 31.36 GiB used: 1.9 GiB (6.1%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
    L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 3600 min/max: N/A cores: 1: 3600 2: 3600 3: 3600 4: 3600
    5: 3600 6: 3600 7: 3600 8: 3600 9: 3600 10: 3600 11: 3600 12: 3600
    bogomips: 86442
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid
    f16c flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb ibs
    irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor movbe
    msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae
    pat pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
    pfthreshold pge pni popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a
    rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme smep ssbd sse
    sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce
    topoext tsc tsc_scale umip v_spec_ctrl v_vmsave_vmload vgif vmcb_clean vme
    vmmcall wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl and seccomp
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2
    mitigation: Retpolines, IBPB: conditional, STIBP: conditional, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: DP-1,HDMI-A-1 empty: DVI-D-1,DVI-D-2
    bus-ID: 26:00.0 chip-ID: 1002:67df class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
    loaded: amdgpu,ati unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3520x1080 s-dpi: 96 s-size: 931x285mm (36.7x11.2")
    s-diag: 974mm (38.3")
  Monitor-1: DisplayPort-0 mapped: DP-1 pos: primary,left
    model: Philips PHL 221V8 serial: <filter> built: 2020 res: 1920x1080 hz: 60
    dpi: 102 gamma: 1.2 size: 477x268mm (18.8x10.6") diag: 547mm (21.5")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  Monitor-2: HDMI-A-0 mapped: HDMI-A-1 pos: right model: LG (GoldStar) E2060
    serial: <filter> built: 2010 res: 1600x900 hz: 60 dpi: 92 gamma: 1.2
    size: 443x249mm (17.4x9.8") diag: 515mm (20.3") ratio: 16:9 modes:
    max: 1600x900 min: 720x400
  OpenGL: renderer: AMD Radeon RX 470 Graphics (POLARIS10 DRM 3.42.0
    5.15.28-1-MANJARO LLVM 13.0.1)
    v: 4.6 Mesa 21.3.7 direct render: Yes
Audio:
  Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 16 link-max: gen: 3 speed: 8 GT/s bus-ID: 26:00.1
    chip-ID: 1002:aaf0 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 28:00.4 chip-ID: 1022:1487 class-ID: 0403
  Sound Server-1: ALSA v: k5.15.28-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter
    driver: bcma-pci-bridge v: N/A modules: bcma pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 bus-ID: 21:00.0 chip-ID: 14e4:43a0 class-ID: 0280
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Micro-Star MSI driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: f000 bus-ID: 22:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp34s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
    driver: btusb v: 0.8 bus-ID: 3-2:2 chip-ID: 0a12:0001 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.02 TiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: AMD Radeon model: R5MP960G8
    size: 894.25 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 type: SSD serial: <filter> rev: T0709A3 temp: 32.9 C scheme: MBR
  ID-2: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G
    size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 5A scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Western Digital
    model: WD10EZEX-08WN4A0 size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
    rev: 1A01 scheme: GPT
  ID-4: /dev/sdc maj-min: 8:32 type: USB vendor: Kingston
    model: DataTraveler 3.0 size: 14.41 GiB block-size: physical: 512 B
    logical: 512 B type: N/A serial: <filter> scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  Message: No partition data found.
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 894.25 GiB fs: btrfs label: N/A
    uuid: 9bdf64a9-d3c3-47db-b79a-40c891884c0b
  ID-2: /dev/sda1 maj-min: 8:1 size: 100 MiB fs: vfat label: N/A
    uuid: 1A92-78D0
  ID-3: /dev/sda2 maj-min: 8:2 size: 16 MiB fs: <superuser required>
    label: N/A uuid: N/A
  ID-4: /dev/sda3 maj-min: 8:3 size: 222.95 GiB fs: ntfs label: N/A
    uuid: 02BE9948BE9934DF
  ID-5: /dev/sda4 maj-min: 8:4 size: 521 MiB fs: ntfs label: N/A
    uuid: CA70118D701180FD
  ID-6: /dev/sdb1 maj-min: 8:17 size: 898.51 GiB fs: btrfs label: /data
    uuid: 2d7a6003-4825-4725-b18f-f935aa2e274f
  ID-7: /dev/sdc1 maj-min: 8:33 size: 3.54 GiB fs: iso9660
  ID-8: /dev/sdc2 maj-min: 8:34 size: 4 MiB fs: vfat label: MISO_EFI
    uuid: EAE6-38D6
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-8:2 info: Pixart Imaging Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s
    power: 100mA chip-ID: 093a:2521 class-ID: 0301
  Device-2: 1-9:3 info: Microdia USB DEVICE type: Keyboard,Mouse
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 400mA chip-ID: 0c45:7633 class-ID: 0301
  Hub-2: 2-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
    type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
    power: 100mA chip-ID: 0a12:0001 class-ID: e001
  Hub-4: 4-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
  Device-1: 4-1:2 info: Kingston DataTraveler 100 G3/G4/SE9 G2/50
    type: Mass Storage driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s
    power: 296mA chip-ID: 0951:1666 class-ID: 0806 serial: <filter>
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 37.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 2
Info:
  Processes: 327 Uptime: 1m wakeups: 0 Init: systemd v: 250 tool: systemctl
  Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: pacman: 1241 lib: 334
  flatpak: 0 Shell: Zsh v: 5.8.1 default: Bash v: 5.1.16 running-in: konsole
  inxi: 3.3.13

Did you check the checksum SHA1 of Manjaro KDE ISO if it is correct after download?

If yes,

  • Please read this:
    [HowTo] Provide System Information
    and press the three dots below your post and press the :pencil2: to give us more information so we can see what’s really going on.

  • An inxi --admin --verbosity=7 --filter --no-host --width would be the minimum required information for us to be able to help you. (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
    Also, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text.

Could be a conflicting setting in Plasma.

The setting makes Plasma mount known devices, which causes what you are describing.

2 Likes

I have added information

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.