I can't get my desktop to fully load in. Unstable

System:
  Kernel: 5.10.0-rc7-1-MANJARO-ARM aarch64 bits: 64 compiler: N/A
  parameters: coherent_pool=1M 8250.nr_uarts=0
  snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1
  video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:60:BA:44
  vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=LABEL=ROOT_MNJRO
  rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0
  smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop
  usbhid.mousepoll=8 snd-bcm2835.enable_compat_alsa=0 audit=0
  Console: tty 0 DM: LightDM 1.30.0 Distro: Manjaro ARM
Machine:
  Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.2 details: BCM2835
  rev: c03112 serial: <filter>
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Touch Keyboard K400
  serial: <filter> charge: 100% (should be ignored) rechargeable: yes
  status: Discharging
CPU:
  Info: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP
  arch: ARMv8 family: 8 model-id: N/A stepping: 3 microcode: N/A
  features: Use -f option to see features bogomips: 432
  Speed: 600 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1000 2: 1000
  3: 1000 4: 1000
  Vulnerabilities: Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: __user pointer sanitization
  Type: spectre_v2 status: Vulnerable
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu
  Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc
  Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc
  Display: server: X.org 1.20.10 driver: modesetting alternate: fbdev
  tty: 83x39
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A
  chip ID: brcm:bcm2835_audio
  Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc
  Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc
  Sound Server: ALSA v: k5.10.0-rc7-1-MANJARO-ARM
Network:
  Message: No ARM data found for this feature.
  IF-ID-1: eth0 state: down mac: <filter>
  IF-ID-2: wlan0 state: up mac: <filter>
Drives:
  Local Storage: total: 119.08 GiB used: 11.97 GiB (10.0%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/mmcblk0 model: SC128 size: 119.08 GiB block size: physical: 512 B
  logical: 512 B serial: <filter> scheme: MBR
Partition:
  ID-1: / raw size: 118.85 GiB size: 116.94 GiB (98.40%)
  used: 11.92 GiB (10.2%) fs: ext4 dev: /dev/mmcblk0p2
  ID-2: /boot raw size: 213.6 MiB size: 213.4 MiB (99.89%)
  used: 50.1 MiB (23.5%) fs: vfat dev: /dev/mmcblk0p1
Swap:
  Kernel: swappiness: 60 (default) cache pressure: 100 (default)
  ID-1: swap-1 type: zram size: 5.58 GiB used: 0 KiB (0.0%) priority: 100
  dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 42.8 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 161 Uptime: 1h 26m Memory: 3.78 GiB used: 530.2 MiB (13.7%)
  gpu: 64.0 MiB Init: systemd v: 247 Compilers: gcc: 10.2.0 Packages:
  pacman: 743 lib: 205 Shell: Bash v: 5.1.4 running in: tty 0 (SSH)
  inxi: 3.1.08

Do you get to LightDM?

If not, what’s the output of systemctl status lightdm?

Any errors in dmesg?

I had to boot my main pc .

● lightdm.service - Light Display Manager
     Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; vendor preset: disabled)
     Active: active (running) since Tue 2020-12-29 19:20:43 AEST; 1h 38min ago
       Docs: man:lightdm(1)
   Main PID: 356 (lightdm)
      Tasks: 4 (limit: 4247)
     CGroup: /system.slice/lightdm.service
             ├─356 /usr/bin/lightdm
             └─367 /usr/lib/Xorg :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch

Dec 29 19:20:43 ManPi systemd[1]: Starting Light Display Manager...
Dec 29 19:20:43 ManPi systemd[1]: Started Light Display Manager.
Dec 29 19:20:43 ManPi lightdm[356]: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesk>
Dec 29 19:20:46 ManPi lightdm[415]: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesk>
Dec 29 19:20:46 ManPi lightdm[415]: pam_unix(lightdm-greeter:session): session opened for user lightdm(uid=972) by >
Dec 29 19:21:01 ManPi lightdm[463]: pam_systemd_home(lightdm:account): Not a user managed by systemd-homed: No home>
Dec 29 19:21:01 ManPi lightdm[463]: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesk>
Dec 29 19:21:01 ManPi lightdm[463]: pam_unix(lightdm:session): session opened for user joel(uid=1000) by (uid=0)
Dec 29 19:21:02 ManPi lightdm[463]: Error opening audit socket: Protocol not supported
Dec 29 19:21:02 ManPi lightdm[463]: pam_env(lightdm:session): deprecated reading of user environment enabl

dmesg

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.0-rc7-1-MANJARO-ARM (ray@vim3) (aarch64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP PREEMPT Mon Dec 7 21:25:58 CST 2020
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001e800000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003bffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] On node 0 totalpages: 1015808
[    0.000000]   DMA zone: 3840 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 245760 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12032 pages used for memmap
[    0.000000]   DMA32 zone: 770048 pages, LIFO batch:63
[    0.000000] percpu: Embedded 32 pages/cpu s91160 r8192 d31720 u131072
[    0.000000] pcpu-alloc: s91160 r8192 d31720 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999936
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:60:BA:44 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=LABEL=ROOT_MNJRO rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop usbhid.mousepoll=8 snd-bcm2835.enable_compat_alsa=0 audit=0
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] audit: disabled (until reboot)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000038000000-0x000000003c000000] (64MB)
[    0.000000] Memory: 3624736K/4063232K available (11520K kernel code, 2390K rwdata, 3956K rodata, 3648K init, 1401K bss, 176352K reserved, 262144K cma-reserved)
[    0.000000] random: get_random_u64 called from cache_random_seq_create+0x90/0x190 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 35772 entries in 140 pages
[    0.000000] ftrace: allocated 140 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000262] Console: colour dummy device 80x25
[    0.000802] printk: console [tty1] enabled
[    0.000863] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000905] pid_max: default: 32768 minimum: 301
[    0.001128] LSM: Security Framework initializing
[    0.001387] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001470] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002975] Disabling memory control group subsystem
[    0.004900] rcu: Hierarchical SRCU implementation.
[    0.005966] EFI services will not be available.
[    0.006492] smp: Bringing up secondary CPUs ...
[    0.007498] Detected PIPT I-cache on CPU1
[    0.007581] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.008814] Detected PIPT I-cache on CPU2
[    0.008862] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.009911] Detected PIPT I-cache on CPU3
[    0.009959] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.010107] smp: Brought up 1 node, 4 CPUs
[    0.010196] SMP: Total of 4 processors activated.
[    0.010219] CPU features: detected: 32-bit EL0 Support
[    0.010242] CPU features: detected: CRC32 instructions
[    0.010265] CPU features: detected: 32-bit EL1 Support
[    0.045392] CPU: All CPU(s) started at EL2
[    0.045480] alternatives: patching kernel code
[    0.047438] devtmpfs: initialized
[    0.058330] Enabled cp15_barrier support
[    0.058397] Enabled setend support
[    0.059172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.059218] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.066886] pinctrl core: initialized pinctrl subsystem
[    0.067766] DMI not present or invalid.
[    0.068230] NET: Registered protocol family 16
[    0.071225] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.071505] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.072466] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.073065] thermal_sys: Registered thermal governor 'step_wise'
[    0.073603] cpuidle: using governor menu
[    0.073859] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.074040] ASID allocator initialised with 65536 entries
[    0.074275] Serial: AMBA PL011 UART driver
[    0.102815] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.104283] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-12-15T18:28:46, variant start
[    0.108296] raspberrypi-firmware soc:firmware: Firmware hash is 4b4aff21f72c5b9ba39d83c7b0f8fa910a6ef99b
[    0.142522] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.146570] vgaarb: loaded
[    0.147047] SCSI subsystem initialized
[    0.147301] usbcore: registered new interface driver usbfs
[    0.147378] usbcore: registered new interface driver hub
[    0.147523] usbcore: registered new device driver usb
[    0.147842] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.149560] clocksource: Switched to clocksource arch_sys_counter
[    1.173182] VFS: Disk quotas dquot_6.6.0
[    1.173325] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.173518] FS-Cache: Loaded
[    1.173796] CacheFiles: Loaded
[    1.175083] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes, mapped to 0x(____ptrval____)
[    1.175118] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[    1.187214] Console: switching to colour frame buffer device 240x67
[    1.198218] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered!
[    1.208302] NET: Registered protocol family 2
[    1.209251] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.209391] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.209734] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.210309] TCP: Hash tables configured (established 32768 bind 32768)
[    1.210634] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.210781] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.211197] NET: Registered protocol family 1
[    1.212252] RPC: Registered named UNIX socket transport module.
[    1.212333] RPC: Registered udp transport module.
[    1.212394] RPC: Registered tcp transport module.
[    1.212457] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.212546] PCI: CLS 0 bytes, default 64
[    1.212854] Trying to unpack rootfs image as initramfs...
[    1.682853] Freeing initrd memory: 6876K
[    1.684889] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.685290] kvm [1]: IPA Size Limit: 44 bits
[    1.686609] kvm [1]: vgic interrupt IRQ9
[    1.686931] kvm [1]: Hyp mode initialized successfully
[    1.689335] Initialise system trusted keyrings
[    1.689802] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.696405] zbud: loaded
[    1.698451] FS-Cache: Netfs 'nfs' registered for caching
[    1.699256] NFS: Registering the id_resolver key type
[    1.699356] Key type id_resolver registered
[    1.699412] Key type id_legacy registered
[    1.699583] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.701909] Key type asymmetric registered
[    1.701978] Asymmetric key parser 'x509' registered
[    1.702083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.702446] io scheduler mq-deadline registered
[    1.702511] io scheduler kyber registered
[    1.702698] io scheduler bfq registered
[    1.706866] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.706977] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.707136] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.710221] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.763655] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.766889] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.769824] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.772683] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.775671] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.778783] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.785332] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.788356] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.791640] pci 0000:01:00.0: PME# supported from D0 D3cold
[    1.798012] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.800807] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.803677] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.806537] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.816710] iproc-rng200 fe104000.rng: hwrng registered
[    1.819967] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.823863] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.827204] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.842256] brd: module loaded
[    1.859182] loop: module loaded
[    1.863791] Loading iSCSI transport class v2.0-870.
[    1.868999] libphy: Fixed MDIO Bus: probed
[    1.873071] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.885588] libphy: bcmgenet MII bus: probed
[    1.941714] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.945706] usbcore: registered new interface driver r8152
[    1.948555] usbcore: registered new interface driver lan78xx
[    1.951326] usbcore: registered new interface driver smsc95xx
[    1.956714] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    1.959445] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[    1.962232] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.964901] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.968305] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000018000000890
[    1.972290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.974999] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.977697] usb usb1: Product: xHCI Host Controller
[    1.980392] usb usb1: Manufacturer: Linux 5.10.0-rc7-1-MANJARO-ARM xhci-hcd
[    1.983088] usb usb1: SerialNumber: 0000:01:00.0
[    1.986549] hub 1-0:1.0: USB hub found
[    1.989318] hub 1-0:1.0: 1 port detected
[    1.992700] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.995392] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.998077] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    2.001152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.003888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.006613] usb usb2: Product: xHCI Host Controller
[    2.009290] usb usb2: Manufacturer: Linux 5.10.0-rc7-1-MANJARO-ARM xhci-hcd
[    2.012007] usb usb2: SerialNumber: 0000:01:00.0
[    2.015375] hub 2-0:1.0: USB hub found
[    2.018122] hub 2-0:1.0: 4 ports detected
[    2.022388] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.025347] dwc_otg: FIQ enabled
[    2.025358] dwc_otg: NAK holdoff enabled
[    2.025368] dwc_otg: FIQ split-transaction FSM enabled
[    2.025382] Module dwc_common_port init
[    2.026090] usbcore: registered new interface driver uas
[    2.028890] usbcore: registered new interface driver usb-storage
[    2.031801] mousedev: PS/2 mouse device common for all mice
[    2.036390] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.042652] sdhci: Secure Digital Host Controller Interface driver
[    2.045341] sdhci: Copyright(c) Pierre Ossman
[    2.048714] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    2.051603] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.054730] ledtrig-cpu: registered to indicate activity on CPUs
[    2.056167] hid: raw HID events driver (C) Jiri Kosina
[    2.057528] usbcore: registered new interface driver usbhid
[    2.058814] usbhid: USB HID core driver
[    2.060228] ashmem: initialized
[    2.065397] Initializing XFRM netlink socket
[    2.066808] NET: Registered protocol family 17
[    2.068219] Key type dns_resolver registered
[    2.069872] registered taskstats version 1
[    2.071331] Loading compiled-in X.509 certificates
[    2.072949] Key type ._fscrypt registered
[    2.074197] Key type .fscrypt registered
[    2.075401] Key type fscrypt-provisioning registered
[    2.081502] uart-pl011 fe201000.serial: there is not valid maps for state default
[    2.084629] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    2.086044] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
[    2.092012] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.095548] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.096807] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    2.123183] of_cfs_init
[    2.124795] of_cfs_init: OK
[    2.139756] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.142598] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.145423] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.149463] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.152263] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.160834] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    2.166533] Freeing unused kernel memory: 3648K
[    2.167817] Run /init as init process
[    2.168980]   with arguments:
[    2.168985]     /init
[    2.168988]   with environment:
[    2.168992]     HOME=/
[    2.168996]     TERM=linux
[    2.169001]     selinux=0
[    2.169005]     kgdboc=ttyS0,115200
[    2.185635] random: fast init done
[    2.212279] mmc1: new high speed SDIO card at address 0001
[    2.264432] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    2.266534] mmcblk0: mmc0:aaaa SC128 119 GiB
[    2.271169]  mmcblk0: p1 p2
[    2.325600] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.476234] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.477458] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.478676] usb 1-1: Product: USB2.0 Hub
[    2.481730] hub 1-1:1.0: USB hub found
[    2.483166] hub 1-1:1.0: 4 ports detected
[    2.682427] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.777577] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[    2.892682] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[    2.895472] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.898117] usb 1-1.3: Product: USB Receiver
[    2.901038] usb 1-1.3: Manufacturer: Logitech
[    2.915789] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0001/input/input0
[    2.982499] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input0
[    2.996502] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input1
[    3.000302] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input2
[    3.062078] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input3
[    3.066100] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input1
[    3.077749] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[    3.166004] systemd[1]: System time before build time, advancing clock.
[    3.265899] NET: Registered protocol family 10
[    3.270761] Segment Routing with IPv6
[    3.330022] systemd[1]: systemd 247.2-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.337765] systemd[1]: Detected architecture arm64.
[    3.386842] systemd[1]: Set hostname to <ManPi>.
[    4.105929] systemd[1]: /usr/lib/systemd/system/stop-dmesg.service:2: Unknown key name 'USER' in section 'Unit', ignoring.
[    4.127841] systemd[1]: Queued start job for default target Graphical Interface.
[    4.130475] random: systemd: uninitialized urandom read (16 bytes read)
[    4.154292] systemd[1]: Created slice system-getty.slice.
[    4.158844] random: systemd: uninitialized urandom read (16 bytes read)
[    4.161951] systemd[1]: Created slice system-modprobe.slice.
[    4.166138] random: systemd: uninitialized urandom read (16 bytes read)
[    4.168780] systemd[1]: Created slice User and Session Slice.
[    4.172862] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.176957] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.181390] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.185399] systemd[1]: Reached target Local Encrypted Volumes.
[    4.189353] systemd[1]: Reached target Login Prompts.
[    4.193180] systemd[1]: Reached target Paths.
[    4.196943] systemd[1]: Reached target Remote Encrypted Volumes.
[    4.200720] systemd[1]: Reached target Remote File Systems.
[    4.204523] systemd[1]: Reached target Slices.
[    4.208326] systemd[1]: Reached target Swap.
[    4.212259] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.216335] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.220389] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.229477] systemd[1]: Listening on Process Core Dump Socket.
[    4.241956] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    4.244610] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.249612] systemd[1]: Listening on Journal Socket.
[    4.254633] systemd[1]: Listening on Network Service Netlink Socket.
[    4.265307] systemd[1]: Listening on udev Control Socket.
[    4.269640] systemd[1]: Listening on udev Kernel Socket.
[    4.273807] systemd[1]: Listening on User Database Manager Socket.
[    4.278028] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.282101] systemd[1]: Mounting POSIX Message Queue File System...
[    4.288338] systemd[1]: Mounting Kernel Debug File System...
[    4.295089] systemd[1]: Mounting Kernel Trace File System...
[    4.302198] systemd[1]: Mounting Temporary Directory (/tmp)...
[    4.308849] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.315581] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.321846] systemd[1]: Starting Load Kernel Module configfs...
[    4.328858] systemd[1]: Starting Load Kernel Module drm...
[    4.336303] systemd[1]: Starting Load Kernel Module fuse...
[    4.357255] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.373796] fuse: init (API version 7.32)
[    4.375148] systemd[1]: Starting Load Kernel Modules...
[    4.383712] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.388942] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.393475] systemd[1]: Starting Coldplug All udev Devices...
[    4.402332] systemd[1]: Mounted POSIX Message Queue File System.
[    4.405906] systemd[1]: Mounted Kernel Debug File System.
[    4.410009] systemd[1]: Mounted Kernel Trace File System.
[    4.416425] systemd[1]: Mounted Temporary Directory (/tmp).
[    4.423624] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.430038] i2c /dev entries driver
[    4.435767] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.438418] systemd[1]: Finished Load Kernel Module configfs.
[    4.443105] systemd[1]: modprobe@drm.service: Succeeded.
[    4.445938] systemd[1]: Finished Load Kernel Module drm.
[    4.450188] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.452578] systemd[1]: Finished Load Kernel Module fuse.
[    4.457490] systemd[1]: Finished Load Kernel Modules.
[    4.462089] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.468642] systemd[1]: Mounting FUSE Control File System...
[    4.475127] systemd[1]: Mounting Kernel Configuration File System...
[    4.479725] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    4.483099] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.484925] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.489357] systemd[1]: Starting Load/Save Random Seed...
[    4.495330] systemd[1]: Starting Apply Kernel Variables...
[    4.499781] systemd[1]: Condition check resulted in Create System Users being skipped.
[    4.505457] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.514523] systemd[1]: Mounted FUSE Control File System.
[    4.520013] systemd[1]: Mounted Kernel Configuration File System.
[    4.542262] systemd[1]: Finished Apply Kernel Variables.
[    4.568613] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.575288] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    4.583622] systemd[1]: Starting Journal Service...
[    4.591743] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.652182] systemd[1]: Finished Coldplug All udev Devices.
[    4.724024] systemd[1]: Started Journal Service.
[    5.171451] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    5.215329] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    5.220282] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    5.224614] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    5.244207] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.248285] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    5.253458] [vc_sm_connected_init]: start
[    5.264152] random: crng init done
[    5.266364] random: 7 urandom warning(s) missed due to ratelimiting
[    5.272310] [vc_sm_connected_init]: installed successfully
[    5.285075] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    5.294622] mc: Linux media interface: v0.10
[    5.312291] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.317261] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.354258] videodev: Linux video capture interface: v2.00
[    5.355154] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    5.359611] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff)
[    5.359622] fb0: switching to vc4drmfb from simple
[    5.366047] Console: switching to colour dummy device 80x25
[    5.370017] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
[    5.376849] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[    5.444344] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.465795] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.467048] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.472406] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    5.473348] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    5.478446] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.483733] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    5.483758] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    5.484189] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    5.484512] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    5.485328] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    5.486604] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    5.486625] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    5.486634] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    5.486641] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    5.486659] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    5.487405] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    5.499177] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    5.500082] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    5.506202] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    5.506225] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    5.539518] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.591041] Console: switching to colour frame buffer device 240x67
[    5.613183] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.618148] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.618987] usbcore: registered new interface driver brcmfmac
[    5.620103] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[    5.746744] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.886104] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.896527] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea                                                                                            
[    6.056834] uart-pl011 fe201000.serial: no DMA platform data
[    6.255835] zram: Added device: zram0
[    6.280569] zram0: detected capacity change from 0 to 5986414592
[    6.361595] Adding 5846104k swap on /dev/zram0.  Priority:100 extents:1 across:5846104k SSFS
[    7.185301] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    7.185627] bcmgenet fd580000.ethernet eth0: Link is Down
[    7.228758] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    8.063800] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[    8.190608] input: Logitech Wireless Device PID:406f Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input5
[    8.191674] input: Logitech Wireless Device PID:406f Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input6
[    8.192217] input: Logitech Wireless Device PID:406f Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input7
[    8.192583] input: Logitech Wireless Device PID:406f System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input8
[    8.193003] hid-generic 0003:046D:406F.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:01:00.0-1.3/input2:2
[    8.197278] input: Logitech Wireless Device PID:4024 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input12
[    8.205892] input: Logitech Wireless Device PID:4024 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input13
[    8.206665] input: Logitech Wireless Device PID:4024 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input14
[    8.206925] input: Logitech Wireless Device PID:4024 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input15
[    8.207158] hid-generic 0003:046D:4024.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4024] on usb-0000:01:00.0-1.3/input2:3
[    8.509124] input: Logitech MX Ergo as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input19
[    8.510075] logitech-hidpp-device 0003:046D:406F.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:01:00.0-1.3/input2:2
[    8.727625] input: Logitech K400 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input20
[    8.728978] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:01:00.0-1.3/input2:3
[   13.297128] logitech-hidpp-device 0003:046D:4024.0005: HID++ 2.0 device connected.
[   13.808169] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[   28.382313] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5603.606065] logitech-hidpp-device 0003:046D:406F.0004: HID++ 4.5 device connected.

That looks like LightDM is running. So what happens when you log in?
Anything new in dmesg after that?

I’ve login but my pointer is stuck in black background,

dmesg output after that, please.

Loged in but my desktop does’t have the taskbar.

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.0-rc7-1-MANJARO-ARM (ray@vim3) (aarch64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP PREEMPT Mon Dec 7 21:25:58 CST 2020
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001e800000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003bffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
[    0.000000] On node 0 totalpages: 1015808
[    0.000000]   DMA zone: 3840 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 245760 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12032 pages used for memmap
[    0.000000]   DMA32 zone: 770048 pages, LIFO batch:63
[    0.000000] percpu: Embedded 32 pages/cpu s91160 r8192 d31720 u131072
[    0.000000] pcpu-alloc: s91160 r8192 d31720 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999936
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:640x480M@60 smsc95xx.macaddr=DC:A6:32:60:BA:44 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=LABEL=ROOT_MNJRO rw rootwait console=ttyS0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 elevator=noop usbhid.mousepoll=8 snd-bcm2835.enable_compat_alsa=0 audit=0
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] audit: disabled (until reboot)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000038000000-0x000000003c000000] (64MB)
[    0.000000] Memory: 3624736K/4063232K available (11520K kernel code, 2390K rwdata, 3956K rodata, 3648K init, 1401K bss, 176352K reserved, 262144K cma-reserved)
[    0.000000] random: get_random_u64 called from cache_random_seq_create+0x90/0x190 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 35772 entries in 140 pages
[    0.000000] ftrace: allocated 140 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000250] Console: colour dummy device 80x25
[    0.000780] printk: console [tty1] enabled
[    0.000838] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000880] pid_max: default: 32768 minimum: 301
[    0.001091] LSM: Security Framework initializing
[    0.001336] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.001412] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002841] Disabling memory control group subsystem
[    0.004677] rcu: Hierarchical SRCU implementation.
[    0.005689] EFI services will not be available.
[    0.006181] smp: Bringing up secondary CPUs ...
[    0.007153] Detected PIPT I-cache on CPU1
[    0.007226] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.008430] Detected PIPT I-cache on CPU2
[    0.008478] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.009506] Detected PIPT I-cache on CPU3
[    0.009553] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.009700] smp: Brought up 1 node, 4 CPUs
[    0.009785] SMP: Total of 4 processors activated.
[    0.009808] CPU features: detected: 32-bit EL0 Support
[    0.009831] CPU features: detected: CRC32 instructions
[    0.009853] CPU features: detected: 32-bit EL1 Support
[    0.044131] CPU: All CPU(s) started at EL2
[    0.044213] alternatives: patching kernel code
[    0.046010] devtmpfs: initialized
[    0.056446] Enabled cp15_barrier support
[    0.056508] Enabled setend support
[    0.057251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.057295] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.064016] pinctrl core: initialized pinctrl subsystem
[    0.064900] DMI not present or invalid.
[    0.065288] NET: Registered protocol family 16
[    0.068286] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.068568] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.069491] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.070062] thermal_sys: Registered thermal governor 'step_wise'
[    0.070558] cpuidle: using governor menu
[    0.070804] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.070981] ASID allocator initialised with 65536 entries
[    0.071205] Serial: AMBA PL011 UART driver
[    0.099550] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.107764] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-12-15T18:28:46, variant start
[    0.111771] raspberrypi-firmware soc:firmware: Firmware hash is 4b4aff21f72c5b9ba39d83c7b0f8fa910a6ef99b
[    0.145673] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.149479] vgaarb: loaded
[    0.149931] SCSI subsystem initialized
[    0.150165] usbcore: registered new interface driver usbfs
[    0.150230] usbcore: registered new interface driver hub
[    0.150377] usbcore: registered new device driver usb
[    0.150691] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.152504] clocksource: Switched to clocksource arch_sys_counter
[    1.174220] VFS: Disk quotas dquot_6.6.0
[    1.174351] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.174528] FS-Cache: Loaded
[    1.174768] CacheFiles: Loaded
[    1.175729] simple-framebuffer 3ea9b000.framebuffer: framebuffer at 0x3ea9b000, 0x12c000 bytes, mapped to 0x(____ptrval____)
[    1.175764] simple-framebuffer 3ea9b000.framebuffer: format=a8r8g8b8, mode=640x480x32, linelength=2560
[    1.177886] Console: switching to colour frame buffer device 80x30
[    1.180658] simple-framebuffer 3ea9b000.framebuffer: fb0: simplefb registered!
[    1.192737] NET: Registered protocol family 2
[    1.194685] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.196920] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.199262] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.201841] TCP: Hash tables configured (established 32768 bind 32768)
[    1.203205] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.204413] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.205935] NET: Registered protocol family 1
[    1.208079] RPC: Registered named UNIX socket transport module.
[    1.209315] RPC: Registered udp transport module.
[    1.210484] RPC: Registered tcp transport module.
[    1.211610] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.212768] PCI: CLS 0 bytes, default 64
[    1.214129] Trying to unpack rootfs image as initramfs...
[    1.681642] Freeing initrd memory: 6876K
[    1.684712] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.687194] kvm [1]: IPA Size Limit: 44 bits
[    1.689543] kvm [1]: vgic interrupt IRQ9
[    1.690860] kvm [1]: Hyp mode initialized successfully
[    1.694198] Initialise system trusted keyrings
[    1.695572] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.702950] zbud: loaded
[    1.705873] FS-Cache: Netfs 'nfs' registered for caching
[    1.707655] NFS: Registering the id_resolver key type
[    1.708717] Key type id_resolver registered
[    1.709689] Key type id_legacy registered
[    1.710734] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.713838] Key type asymmetric registered
[    1.714771] Asymmetric key parser 'x509' registered
[    1.715725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.717809] io scheduler mq-deadline registered
[    1.718738] io scheduler kyber registered
[    1.719771] io scheduler bfq registered
[    1.724748] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.725742] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.727654] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.729637] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.778600] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.780003] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.781080] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.782114] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.784178] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.785524] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.790277] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.791418] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.792897] pci 0000:01:00.0: PME# supported from D0 D3cold
[    1.807613] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.808676] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.810650] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.811640] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.819863] iproc-rng200 fe104000.rng: hwrng registered
[    1.821258] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.824191] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.826720] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.839679] brd: module loaded
[    1.854274] loop: module loaded
[    1.856935] Loading iSCSI transport class v2.0-870.
[    1.860203] libphy: Fixed MDIO Bus: probed
[    1.862407] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.872526] libphy: bcmgenet MII bus: probed
[    1.928651] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.930845] usbcore: registered new interface driver r8152
[    1.931913] usbcore: registered new interface driver lan78xx
[    1.932975] usbcore: registered new interface driver smsc95xx
[    1.935550] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    1.936569] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
[    1.937647] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.938630] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.941324] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000018000000890
[    1.944541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.946572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.948619] usb usb1: Product: xHCI Host Controller
[    1.949637] usb usb1: Manufacturer: Linux 5.10.0-rc7-1-MANJARO-ARM xhci-hcd
[    1.950655] usb usb1: SerialNumber: 0000:01:00.0
[    1.952398] hub 1-0:1.0: USB hub found
[    1.953485] hub 1-0:1.0: 1 port detected
[    1.955080] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.956078] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.958050] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.959486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.961518] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.963648] usb usb2: Product: xHCI Host Controller
[    1.964765] usb usb2: Manufacturer: Linux 5.10.0-rc7-1-MANJARO-ARM xhci-hcd
[    1.965887] usb usb2: SerialNumber: 0000:01:00.0
[    1.967628] hub 2-0:1.0: USB hub found
[    1.968818] hub 2-0:1.0: 4 ports detected
[    1.971426] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.972782] dwc_otg: FIQ enabled
[    1.972793] dwc_otg: NAK holdoff enabled
[    1.972804] dwc_otg: FIQ split-transaction FSM enabled
[    1.972817] Module dwc_common_port init
[    1.973394] usbcore: registered new interface driver uas
[    1.974541] usbcore: registered new interface driver usb-storage
[    1.975747] mousedev: PS/2 mouse device common for all mice
[    1.978657] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.985986] sdhci: Secure Digital Host Controller Interface driver
[    1.986990] sdhci: Copyright(c) Pierre Ossman
[    1.988672] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.990177] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.993469] ledtrig-cpu: registered to indicate activity on CPUs
[    1.994100] hid: raw HID events driver (C) Jiri Kosina
[    1.994689] usbcore: registered new interface driver usbhid
[    1.995190] usbhid: USB HID core driver
[    1.995850] ashmem: initialized
[    2.000174] Initializing XFRM netlink socket
[    2.000775] NET: Registered protocol family 17
[    2.001336] Key type dns_resolver registered
[    2.002055] registered taskstats version 1
[    2.002563] Loading compiled-in X.509 certificates
[    2.003329] Key type ._fscrypt registered
[    2.003825] Key type .fscrypt registered
[    2.004285] Key type fscrypt-provisioning registered
[    2.011582] uart-pl011 fe201000.serial: there is not valid maps for state default
[    2.012644] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    2.013165] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
[    2.020093] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.021465] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.021953] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    2.049349] of_cfs_init
[    2.049985] of_cfs_init: OK
[    2.064520] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.066541] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.068537] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.071724] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.073969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.087045] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    2.093918] Freeing unused kernel memory: 3648K
[    2.094482] Run /init as init process
[    2.094927]   with arguments:
[    2.094932]     /init
[    2.094937]   with environment:
[    2.094941]     HOME=/
[    2.094945]     TERM=linux
[    2.094950]     selinux=0
[    2.094955]     kgdboc=ttyS0,115200
[    2.105721] random: fast init done
[    2.133346] mmc1: new high speed SDIO card at address 0001
[    2.189719] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[    2.191035] mmcblk0: mmc0:aaaa SC128 119 GiB
[    2.195091]  mmcblk0: p1 p2
[    2.296531] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.451097] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.451888] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.452300] usb 1-1: Product: USB2.0 Hub
[    2.453999] hub 1-1:1.0: USB hub found
[    2.454724] hub 1-1:1.0: 4 ports detected
[    2.748562] usb 1-1.3: new full-speed USB device number 3 using xhci_hcd
[    2.750598] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.859460] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[    2.860661] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.861792] usb 1-1.3: Product: USB Receiver
[    2.862380] usb 1-1.3: Manufacturer: Logitech
[    2.874249] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0001/input/input0
[    2.936915] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input0
[    2.947681] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input1
[    2.950114] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input2
[    3.008784] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0002/input/input3
[    3.011422] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input1
[    3.020329] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[    3.201332] systemd[1]: System time before build time, advancing clock.
[    3.289944] NET: Registered protocol family 10
[    3.292938] Segment Routing with IPv6
[    3.352568] systemd[1]: systemd 247.2-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.358732] systemd[1]: Detected architecture arm64.
[    3.396650] systemd[1]: Set hostname to <ManPi>.
[    4.103801] systemd[1]: /usr/lib/systemd/system/stop-dmesg.service:2: Unknown key name 'USER' in section 'Unit', ignoring.
[    4.126710] systemd[1]: Queued start job for default target Graphical Interface.
[    4.130947] random: systemd: uninitialized urandom read (16 bytes read)
[    4.163130] systemd[1]: Created slice system-getty.slice.
[    4.165153] random: systemd: uninitialized urandom read (16 bytes read)
[    4.166909] systemd[1]: Created slice system-modprobe.slice.
[    4.168659] random: systemd: uninitialized urandom read (16 bytes read)
[    4.170223] systemd[1]: Created slice User and Session Slice.
[    4.172201] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.174887] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.177537] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.179792] systemd[1]: Reached target Local Encrypted Volumes.
[    4.181419] systemd[1]: Reached target Login Prompts.
[    4.183061] systemd[1]: Reached target Paths.
[    4.184741] systemd[1]: Reached target Remote Encrypted Volumes.
[    4.186209] systemd[1]: Reached target Remote File Systems.
[    4.187654] systemd[1]: Reached target Slices.
[    4.189109] systemd[1]: Reached target Swap.
[    4.190713] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.192443] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.194153] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.200734] systemd[1]: Listening on Process Core Dump Socket.
[    4.208720] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    4.210815] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.213148] systemd[1]: Listening on Journal Socket.
[    4.215492] systemd[1]: Listening on Network Service Netlink Socket.
[    4.224099] systemd[1]: Listening on udev Control Socket.
[    4.225909] systemd[1]: Listening on udev Kernel Socket.
[    4.227635] systemd[1]: Listening on User Database Manager Socket.
[    4.229688] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.233980] systemd[1]: Mounting POSIX Message Queue File System...
[    4.239118] systemd[1]: Mounting Kernel Debug File System...
[    4.244354] systemd[1]: Mounting Kernel Trace File System...
[    4.250837] systemd[1]: Mounting Temporary Directory (/tmp)...
[    4.256329] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.262278] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.267701] systemd[1]: Starting Load Kernel Module configfs...
[    4.272967] systemd[1]: Starting Load Kernel Module drm...
[    4.278263] systemd[1]: Starting Load Kernel Module fuse...
[    4.298050] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.316032] systemd[1]: Starting Load Kernel Modules...
[    4.320901] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.320905] fuse: init (API version 7.32)
[    4.323560] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    4.328004] systemd[1]: Starting Coldplug All udev Devices...
[    4.336675] systemd[1]: Mounted POSIX Message Queue File System.
[    4.338999] systemd[1]: Mounted Kernel Debug File System.
[    4.340994] systemd[1]: Mounted Kernel Trace File System.
[    4.343107] systemd[1]: Mounted Temporary Directory (/tmp).
[    4.345929] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.352843] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.354432] systemd[1]: Finished Load Kernel Module configfs.
[    4.356731] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.358200] systemd[1]: Finished Load Kernel Module fuse.
[    4.362208] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.368889] systemd[1]: Mounting FUSE Control File System...
[    4.374922] systemd[1]: Mounting Kernel Configuration File System...
[    4.377387] i2c /dev entries driver
[    4.377694] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    4.387937] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.390135] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.394045] systemd[1]: Starting Load/Save Random Seed...
[    4.395919] systemd[1]: Condition check resulted in Create System Users being skipped.
[    4.399762] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.405588] systemd[1]: modprobe@drm.service: Succeeded.
[    4.407620] systemd[1]: Finished Load Kernel Module drm.
[    4.411178] systemd[1]: Finished Load Kernel Modules.
[    4.413646] systemd[1]: Mounted FUSE Control File System.
[    4.415684] systemd[1]: Mounted Kernel Configuration File System.
[    4.420157] systemd[1]: Starting Apply Kernel Variables...
[    4.455699] systemd[1]: Finished Apply Kernel Variables.
[    4.462247] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.467158] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    4.473414] systemd[1]: Starting Journal Service...
[    4.479239] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.573367] systemd[1]: Finished Coldplug All udev Devices.
[    4.606023] systemd[1]: Started Journal Service.
[    5.112934] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[    5.119456] random: crng init done
[    5.120034] random: 7 urandom warning(s) missed due to ratelimiting
[    5.121900] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[    5.123928] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[    5.128483] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[    5.180711] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    5.183116] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.186013] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    5.186719] [vc_sm_connected_init]: start
[    5.195446] [vc_sm_connected_init]: installed successfully
[    5.198144] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.203250] bcm2835_audio bcm2835_audio: card created with 4 channels
[    5.236961] mc: Linux media interface: v0.10
[    5.250715] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    5.273396] videodev: Linux video capture interface: v2.00
[    5.358616] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    5.359440] checking generic (3ea9b000 12c000) vs hw (0 ffffffffffffffff)
[    5.359446] fb0: switching to vc4drmfb from simple
[    5.373851] Console: switching to colour dummy device 80x25
[    5.382813] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[    5.388786] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.397554] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.397994] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.421917] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    5.423215] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.424173] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    5.433307] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    5.433335] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    5.433770] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    5.434112] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    5.434361] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    5.434538] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    5.434556] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    5.434566] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    5.434574] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    5.434590] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    5.434803] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    5.439667] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    5.439697] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    5.443776] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.447692] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    5.447729] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    5.500215] brcmfmac: F1 signature read @0x18000000=0x15264345
[    5.505361] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.505589] usbcore: registered new interface driver brcmfmac
[    5.583960] Console: switching to colour frame buffer device 80x30
[    5.626281] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[    5.708263] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.777834] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.791845] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea                                                                                            
[    6.001061] uart-pl011 fe201000.serial: no DMA platform data
[    6.195456] zram: Added device: zram0
[    6.218581] zram0: detected capacity change from 0 to 5986414592
[    6.288554] Adding 5846104k swap on /dev/zram0.  Priority:100 extents:1 across:5846104k SSFS
[    7.064179] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    7.064416] bcmgenet fd580000.ethernet eth0: Link is Down
[    7.106677] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[    7.984248] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.3/input2
[    8.108102] input: Logitech Wireless Device PID:406f Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input5
[    8.109067] input: Logitech Wireless Device PID:406f Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input6
[    8.109482] input: Logitech Wireless Device PID:406f Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input7
[    8.109703] input: Logitech Wireless Device PID:406f System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input8
[    8.110008] hid-generic 0003:046D:406F.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:01:00.0-1.3/input2:2
[    8.113007] input: Logitech Wireless Device PID:4024 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input12
[    8.114050] input: Logitech Wireless Device PID:4024 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input13
[    8.116854] input: Logitech Wireless Device PID:4024 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input14
[    8.117100] input: Logitech Wireless Device PID:4024 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input15
[    8.117363] hid-generic 0003:046D:4024.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4024] on usb-0000:01:00.0-1.3/input2:3
[    8.407504] input: Logitech MX Ergo as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input19
[    8.408112] logitech-hidpp-device 0003:046D:406F.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:01:00.0-1.3/input2:2
[    8.607539] input: Logitech K400 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0005/input/input20
[    8.608134] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:01:00.0-1.3/input2:3
[   28.520363] logitech-hidpp-device 0003:046D:4024.0005: HID++ 2.0 device connected.
[   29.035236] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[   52.388600] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Okay. Next step is to check journalctl -xe to see if there are any errors.

PS: From the screenshot, it looks like xfwm4 and the panel is not loading.

░░ 
░░ The job identifier is 1837.
Dec 29 21:22:14 ManPi systemd[1]: systemd-tmpfiles-clean.service: Succeeded.
░░ Subject: Unit succeeded
░░ Defined-By: systemd
░░ Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
░░ 
░░ The unit systemd-tmpfiles-clean.service has successfully entered the 'dead' state.
Dec 29 21:22:14 ManPi systemd[1]: Finished Cleanup of Temporary Directories.
░░ Subject: A start job for unit systemd-tmpfiles-clean.service has finished successfully
░░ Defined-By: systemd
░░ Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
░░ 
░░ A start job for unit systemd-tmpfiles-clean.service has finished successfully.
░░ 
░░ The job identifier is 1837.
Dec 29 21:27:10 ManPi nmbd[657]: [2020/12/29 21:27:10.941198,  0] ../../source3/nmbd/nmbd_namequery.c:109(query_nam>
Dec 29 21:27:10 ManPi nmbd[657]:   query_name_response: Multiple (2) responses received for a query on subnet 192.1>
Dec 29 21:27:10 ManPi nmbd[657]:   This response was from IP 192.168.20.18, reporting an IP address of 192.168.20.1>
Dec 29 21:32:11 ManPi nmbd[657]: [2020/12/29 21:32:11.279748,  0] ../../source3/nmbd/nmbd_namequery.c:109(query_nam>
Dec 29 21:32:11 ManPi nmbd[657]:   query_name_response: Multiple (2) responses received for a query on subnet 192.1>
Dec 29 21:32:11 ManPi nmbd[657]:   This response was from IP 192.168.20.18, reporting an IP address of 192.168.20.1>
Dec 29 21:37:20 ManPi nmbd[657]: [2020/12/29 21:37:20.525332,  0] ../../source3/nmbd/nmbd_namequery.c:109(query_nam>
Dec 29 21:37:20 ManPi nmbd[657]:   query_name_response: Multiple (2) responses received for a query on subnet 192.1>
Dec 29 21:37:20 ManPi nmbd[657]:   This response was from IP 192.168.20.18, reporting an IP address of 192.168.20.1>
lines 4827-4851/4851 (END)
0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.150691] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    1.826720] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.064520] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.066541] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.068537] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.071724] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.073969] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    4.103801] systemd[1]: /usr/lib/systemd/system/stop-dmesg.service:2: Unknown key name 'USER' in section 'Unit', ignoring.
[    5.180711] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    5.183116] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    5.397554] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.397994] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    5.421917] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    5.423215] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    5.424173] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    5.505361] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.708263] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.777834] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    5.791845] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
[    7.106677] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   29.035236] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled

I was able to login to root. I think I may of buggered my account by installing wireshark cli and add it to wireshark group,.

That’s a good possibility, depending on the command you used to add your user to the wireshark group.

Easy to check: create a new user.

this was the command

sudo usermod -a -G wireshark joel

I’m thinking of doing a reinstall on an different sd card in the new year. (few minutes for me.)

But going to keep the card with the broken install.