also check bios power-saving features regarding pcie turned them off, no change
Temps are not an issue, the activity need not be taxing or long.
Solid state drive/NVMe - ArchWiki Requires replacing stuff i dont understand in the first place (when in doubt, dont), of the stuff i could do, powersaving issue does not appear to be the issue ie got all zero’s timings in log.
SSD slow (NVME/PCIe4.0) (does not apply, not having a speed issue)
Just in case heres the output
00:01.1 PCI bridge: Adva…
This worked for awhile, then not.
Edit:
As a workaround, add the kernel parameter iommu=soft to use a software replacement for the hardware IOMMU. (For further details, see this documentation .) This has the potential to cause some slight processing overhead.https://wiki.archlinux.org/title/Solid_state_drive/NVMe
New Edit
Switched back to windows briefly to see if the issue existed on windows… NOPE. Everything worked fine. I dont want to go back to windows… ~but~ there does not seem to be a solution Atleast in my grasp… Do i put up with jank os or stalker os…
Hi @Rocherd87 ,
I, myself, have a Samsung NVMe and have absolutely 0
$ fdisk -l
[...]
Disk /dev/nvme0n1: 232.89 GiB, 250059350016 bytes, 488397168 sectors
Disk model: Samsung SSD 960 EVO 250GB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 5053CB27-A627-1B45-9E5E-131BA81C39E6
Device Start End Sectors Size Type
/dev/nvme0n1p1 1026048 17410047 16384000 7.8G Linux swap
/dev/nvme0n1p2 17410048 488392031 470981984 224.6G Linux filesystem
/dev/nvme0n1p3 2048 1026047 1024000 500M Microsoft basic data
Partition table entries are not in disk order.
So I’m going to go ahead and give it my best guess:
Since it seems intermittent and a bit random to me, I’m going with a hardware defect.
If this has been ruled out, I’m still going with it because that’s what fits in my book.
1 Like
I would be concerned about that, but when the issue reappeared, I borrowed the Misses desktop, plugged it in, and iso’ed (backed up) and reformatted it and windows was able to use it and tax it just fine. ran for hours under load no problems then put the restored image, returned to my desktop, and… 30 minutes max maybe 5 mins sometimes.
In that case and seeing as you previously spoke to people much more knowledgeable than I, I have to say: I’m sorry, but I don’t know what else.
count your blessings, lol.https://bugzilla.kernel.org/show_bug.cgi?id=195039
Seems like i am not the only one.
I’m counting, I’m counting.
