Gnome x11 session is blue and black

Tian · 1 December 2021 22:12

Just as the title says I can’t use the x11 session of gnome, every time I try it its just black with the white windows appearing blue, until recently I was using swaywm so maybe its config are destroying the x11 session? on the live media the x1 session works just fine so I doubt its a driver issue, xsession-errors does not shows anything newer than 2020, is there any other x session log I can look? the only “useful” piece of info I could gather was this

dic 01 15:24:11 luis-x453sa rambox.desktop[3440]: [3440:1201/152411.907474:ERROR:buffer_manager.cc(488)] [.DisplayCompositor]GL ERROR :GL_INVALID_OPERATION : glBufferData: <- error from previous GL command

from the manjaro log helper. I would like to post screenshots of the issue but when I take them they are just fine. This looks like an opengl error on x11 as wayland works just fine. Thanks in advice.

anon59284200 · 1 December 2021 22:14

Maybe start by reading the post on how to provide good information, so that we can see what hardware and kernel you’re working with.

Tian · 1 December 2021 22:17

tried to update the log, it did not let me, tried to post the info it also did not allowed me, too much characters, I am trying to post it right now

upload the log, sorry not english speaker

inxi -Fazy                                                                                                                      ✔  3s  
System:
  Kernel: 5.13.19-2-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64
  root=UUID=3bfd2053-4404-49ab-a024-fc509aee2a12 rw quiet splash apparmor=1
  security=apparmor udev.log_priority=3
  Desktop: GNOME 41.1 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 41.0
  Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: ASUSTeK product: X453SA v: 1.0
  serial: <superuser required>
  Mobo: ASUSTeK model: X453SA v: 1.0 serial: <superuser required>
  UEFI: American Megatrends v: X453SA.302 date: 04/19/2019
Battery:
  ID-1: BAT0 charge: 3.1 Wh (100.0%) condition: 3.1/31.7 Wh (9.6%) volts: 7.6
  min: 7.6 model: ASUSTeK X453-42 type: Li-ion serial: N/A status: Full
CPU:
  Info: Dual Core model: Intel Celeron N3050 bits: 64 type: MCP arch: Airmont
  family: 6 model-id: 4C (76) stepping: 3 microcode: 368 cache: L1: 112 KiB
  L2: 2 MiB
  flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 6402
  Speed: 2160 MHz min/max: 480/2160 MHz Core speeds (MHz): 1: 2160 2: 2140
  Vulnerabilities: Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1
  mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional,
  IBRS_FW, STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx
  Integrated Graphics
  vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:22b1
  class-ID: 0300
  Device-2: Realtek USB2.0 VGA UVC WebCam type: USB driver: uvcvideo
  bus-ID: 1-4:2 chip-ID: 0bda:57de class-ID: 0e02 serial: <filter>
  Display: wayland server: X.org 1.21.1.1 compositor: gnome-shell driver:
  loaded: modesetting alternate: fbdev,vesa display-ID: 0
  resolution: <missing: xdpyinfo>
  OpenGL: renderer: Mesa DRI Intel HD Graphics 400 (BSW) v: 4.6 Mesa 21.2.5
  compat-v: 3.0 direct render: Yes
Audio:
  Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series
  High Definition Audio
  vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
  chip-ID: 8086:2284 class-ID: 0403
  Sound Server-1: ALSA v: k5.13.19-2-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.40 running: yes
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: ASUSTeK
  driver: r8169 v: kernel port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8136
  class-ID: 0200
  IF: enp2s0 state: down mac: <filter>
  Device-2: Realtek RTL8723BE PCIe Wireless Network Adapter vendor: Lite-On
  driver: rtl8723be v: kernel port: d000 bus-ID: 03:00.0 chip-ID: 10ec:b723
  class-ID: 0280
  IF: wlp3s0 state: up mac: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
  bus-ID: 1-5:3 chip-ID: 0bda:b721 class-ID: e001 serial: <filter>
  Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
  rfk-block: hardware: no software: yes address: see --recommends
Drives:
  Local Storage: total: 525.24 GiB used: 382.31 GiB (72.8%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/mmcblk0 maj-min: 179:0 vendor: SanDisk model: SL64G
  size: 59.48 GiB block-size: physical: 512 B logical: 512 B type: SSD
  serial: <filter> scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ABF050
  size: 465.76 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
  type: HDD rpm: 5400 serial: <filter> rev: 1J scheme: GPT
Partition:
  ID-1: / raw-size: 24.12 GiB size: 23.57 GiB (97.73%) used: 12.23 GiB (51.9%)
  fs: ext4 dev: /dev/sda8 maj-min: 8:8
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
  used: 30.2 MiB (31.4%) fs: vfat dev: /dev/sda2 maj-min: 8:2
  ID-3: /home raw-size: 25.22 GiB size: 24.7 GiB (97.93%) used: 22 GiB (89.1%)
  fs: ext4 dev: /dev/sda9 maj-min: 8:9
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 4 GiB used: 8 MiB (0.2%) priority: -2
  dev: /dev/sda7 maj-min: 8:7
Sensors:
  System Temperatures: cpu: 6280.4 C mobo: 64.0 C
  Fan Speeds (RPM): cpu: 3700
Info:
  Processes: 206 Uptime: 32m wakeups: 1 Memory: 3.62 GiB
  used: 2.24 GiB (61.9%) Init: systemd v: 249 tool: systemctl Compilers:
  gcc: N/A Packages: pacman: 1320 lib: 369 flatpak: 0 Shell: Zsh v: 5.8
  running-in: gnome-terminal inxi: 3.3.09

anon59284200 · 1 December 2021 22:41

For starters, kernel 5.13 is no longer supported. The Intel drivers in linux513 might not support the newest xorg-server. Try linux510 or linux515. They both have long support life cycles.

Tian · 2 December 2021 00:46

Yeah, will try that, I just created a new account to see if my user config was the problem but the issue ws still there

Installed linux515, the problem persists

this is the log of the test account

[  2987.877] (--) Log file renamed from "/home/test/.local/share/xorg/Xorg.pid-6961.log" to "/home/test/.local/share/xorg/Xorg.0.log"
[  2987.881] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[  2987.881] 
X.Org X Server 1.21.1.1
X Protocol Version 11, Revision 0
[  2987.881] Current Operating System: Linux luis-x453sa 5.13.19-2-MANJARO #1 SMP PREEMPT Sun Sep 19 21:31:53 UTC 2021 x86_64
[  2987.882] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64 root=UUID=3bfd2053-4404-49ab-a024-fc509aee2a12 rw quiet splash apparmor=1 security=apparmor udev.log_priority=3
[  2987.883]  
[  2987.883] Current version of pixman: 0.40.0
[  2987.883] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2987.883] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2987.883] (==) Log file: "/home/test/.local/share/xorg/Xorg.0.log", Time: Wed Dec  1 17:34:38 2021
[  2987.921] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2987.921] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2987.948] (==) No Layout section.  Using the first Screen section.
[  2987.948] (==) No screen section available. Using defaults.
[  2987.948] (**) |-->Screen "Default Screen Section" (0)
[  2987.949] (**) |   |-->Monitor "<default monitor>"
[  2987.950] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2987.950] (==) Automatically adding devices
[  2987.951] (==) Automatically enabling devices
[  2987.951] (==) Automatically adding GPU devices
[  2987.951] (==) Automatically binding GPU devices
[  2987.951] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2987.952] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  2987.952] 	Entry deleted from font path.
[  2987.953] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  2987.953] 	Entry deleted from font path.
[  2987.953] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  2987.953] 	Entry deleted from font path.
[  2987.954] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[  2987.954] 	Entry deleted from font path.
[  2987.954] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[  2987.954] 	Entry deleted from font path.
[  2987.955] (==) FontPath set to:
	/usr/share/fonts/TTF
[  2987.955] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2987.955] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2987.956] (II) Module ABI versions:
[  2987.956] 	X.Org ANSI C Emulation: 0.4
[  2987.956] 	X.Org Video Driver: 25.2
[  2987.957] 	X.Org XInput driver : 24.4
[  2987.957] 	X.Org Server Extension : 10.0
[  2987.961] (++) using VT number 2

[  2987.969] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_39
[  2987.972] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2987.972] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[  2987.975] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[  2987.984] (--) PCI:*(0@0:2:0) 8086:22b1:1043:1cbd rev 33, Mem @ 0x80000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  2987.985] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2987.985] (II) LoadModule: "glx"
[  2988.038] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2988.073] (II) Module glx: vendor="X.Org Foundation"
[  2988.073] 	compiled for 1.21.1.1, module version = 1.0.0
[  2988.074] 	ABI class: X.Org Server Extension, version 10.0
[  2988.074] (==) Matched modesetting as autoconfigured driver 0
[  2988.074] (==) Matched fbdev as autoconfigured driver 1
[  2988.074] (==) Matched vesa as autoconfigured driver 2
[  2988.074] (==) Assigned the driver to the xf86ConfigLayout
[  2988.074] (II) LoadModule: "modesetting"
[  2988.075] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  2988.098] (II) Module modesetting: vendor="X.Org Foundation"
[  2988.098] 	compiled for 1.21.1.1, module version = 1.21.1
[  2988.099] 	Module class: X.Org Video Driver
[  2988.099] 	ABI class: X.Org Video Driver, version 25.2
[  2988.099] (II) LoadModule: "fbdev"
[  2988.102] (WW) Warning, couldn't open module fbdev
[  2988.102] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  2988.102] (II) LoadModule: "vesa"
[  2988.105] (WW) Warning, couldn't open module vesa
[  2988.105] (EE) Failed to load module "vesa" (module does not exist, 0)
[  2988.105] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2988.106] (II) modeset(0): using drv /dev/dri/card0
[  2988.106] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2988.107] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2988.107] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  2988.107] (==) modeset(0): RGB weight 888
[  2988.107] (==) modeset(0): Default visual is TrueColor
[  2988.107] (II) Loading sub module "glamoregl"
[  2988.108] (II) LoadModule: "glamoregl"
[  2988.108] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  2988.144] (II) Module glamoregl: vendor="X.Org Foundation"
[  2988.145] 	compiled for 1.21.1.1, module version = 1.0.1
[  2988.145] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2988.204] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) HD Graphics 400 (BSW)
[  2988.204] (II) modeset(0): glamor initialized
[  2988.204] (==) modeset(0): VariableRefresh: disabled
[  2988.204] (==) modeset(0): AsyncFlipSecondaries: disabled
[  2988.206] (II) modeset(0): Output eDP-1 has no monitor section
[  2988.206] (II) modeset(0): Output DP-1 has no monitor section
[  2988.208] (II) modeset(0): Output HDMI-1 has no monitor section
[  2988.209] (II) modeset(0): Output DP-2 has no monitor section
[  2988.210] (II) modeset(0): Output HDMI-2 has no monitor section
[  2988.229] (II) modeset(0): EDID for output eDP-1
[  2988.230] (II) modeset(0): Manufacturer: CMN  Model: 1493  Serial#: 0
[  2988.230] (II) modeset(0): Year: 2013  Week: 40
[  2988.230] (II) modeset(0): EDID Version: 1.4
[  2988.230] (II) modeset(0): Digital Display Input
[  2988.230] (II) modeset(0): 6 bits per channel
[  2988.230] (II) modeset(0): Digital interface is DisplayPort
[  2988.230] (II) modeset(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[  2988.230] (II) modeset(0): Gamma: 2.20
[  2988.230] (II) modeset(0): No DPMS capabilities specified
[  2988.230] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[  2988.230] (II) modeset(0): First detailed timing is preferred mode
[  2988.230] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[  2988.230] (II) modeset(0): redX: 0.575 redY: 0.335   greenX: 0.327 greenY: 0.580
[  2988.230] (II) modeset(0): blueX: 0.157 blueY: 0.137   whiteX: 0.313 whiteY: 0.329
[  2988.230] (II) modeset(0): Manufacturer's mask: 0
[  2988.230] (II) modeset(0): Supported detailed timing:
[  2988.231] (II) modeset(0): clock: 76.4 MHz   Image Size:  309 x 173 mm
[  2988.231] (II) modeset(0): h_active: 1366  h_sync: 1434  h_sync_end 1479 h_blank_end 1592 h_border: 0
[  2988.231] (II) modeset(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 800 v_border: 0
[  2988.231] (II) modeset(0):  N140BGE-E43
[  2988.231] (II) modeset(0):  CMN
[  2988.231] (II) modeset(0):  N140BGE-E43
[  2988.231] (II) modeset(0): EDID (in hex):
[  2988.231] (II) modeset(0): 	00ffffffffffff000dae931400000000
[  2988.231] (II) modeset(0): 	28170104951f1178027e459355539428
[  2988.231] (II) modeset(0): 	23505400000001010101010101010101
[  2988.231] (II) modeset(0): 	010101010101da1d56e250002030442d
[  2988.231] (II) modeset(0): 	470035ad10000018000000fe004e3134
[  2988.231] (II) modeset(0): 	304247452d4534330a20000000fe0043
[  2988.231] (II) modeset(0): 	4d4e0a202020202020202020000000fe
[  2988.231] (II) modeset(0): 	004e3134304247452d4534330a200095
[  2988.232] (II) modeset(0): Printing probed modes for output eDP-1
[  2988.232] (II) modeset(0): Modeline "1366x768"x60.0   76.42  1366 1434 1479 1592  768 772 779 800 -hsync -vsync (48.0 kHz eP)
[  2988.232] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[  2988.232] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[  2988.232] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[  2988.232] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[  2988.233] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  2988.233] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  2988.233] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  2988.233] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  2988.233] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[  2988.233] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[  2988.233] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[  2988.233] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[  2988.233] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[  2988.233] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  2988.233] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2988.234] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2988.234] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[  2988.234] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[  2988.234] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[  2988.234] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[  2988.234] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  2988.234] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[  2988.234] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[  2988.234] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  2988.234] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[  2988.234] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[  2988.234] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  2988.234] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2988.234] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[  2988.234] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[  2988.235] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[  2988.235] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[  2988.235] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[  2988.235] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[  2988.235] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[  2988.235] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[  2988.235] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[  2988.235] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[  2988.235] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  2988.235] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[  2988.235] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[  2988.235] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[  2988.235] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[  2988.235] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  2988.235] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  2988.235] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[  2988.236] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[  2988.236] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  2988.236] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[  2988.236] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[  2988.236] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[  2988.236] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[  2988.236] (II) modeset(0): EDID for output DP-1
[  2988.237] (II) modeset(0): EDID for output HDMI-1
[  2988.237] (II) modeset(0): EDID for output DP-2
[  2988.239] (II) modeset(0): EDID for output HDMI-2
[  2988.239] (II) modeset(0): Output eDP-1 connected
[  2988.239] (II) modeset(0): Output DP-1 disconnected
[  2988.239] (II) modeset(0): Output HDMI-1 disconnected
[  2988.239] (II) modeset(0): Output DP-2 disconnected
[  2988.239] (II) modeset(0): Output HDMI-2 disconnected
[  2988.239] (II) modeset(0): Using exact sizes for initial modes
[  2988.239] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[  2988.239] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  2988.239] (==) modeset(0): DPI set to (96, 96)
[  2988.239] (II) Loading sub module "fb"
[  2988.240] (II) LoadModule: "fb"
[  2988.240] (II) Module "fb" already built-in
[  2988.595] (==) modeset(0): Backing store enabled
[  2988.596] (==) modeset(0): Silken mouse enabled
[  2988.733] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[  2988.733] (==) modeset(0): DPMS enabled
[  2988.734] (II) modeset(0): [DRI2] Setup complete
[  2988.734] (II) modeset(0): [DRI2]   DRI driver: i965
[  2988.734] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[  2988.734] (II) Initializing extension Generic Event Extension
[  2988.735] (II) Initializing extension SHAPE
[  2988.736] (II) Initializing extension MIT-SHM
[  2988.737] (II) Initializing extension XInputExtension
[  2988.739] (II) Initializing extension XTEST
[  2988.740] (II) Initializing extension BIG-REQUESTS
[  2988.742] (II) Initializing extension SYNC
[  2988.743] (II) Initializing extension XKEYBOARD
[  2988.744] (II) Initializing extension XC-MISC
[  2988.745] (II) Initializing extension SECURITY
[  2988.746] (II) Initializing extension XFIXES
[  2988.747] (II) Initializing extension RENDER
[  2988.749] (II) Initializing extension RANDR
[  2988.751] (II) Initializing extension COMPOSITE
[  2988.752] (II) Initializing extension DAMAGE
[  2988.753] (II) Initializing extension MIT-SCREEN-SAVER
[  2988.754] (II) Initializing extension DOUBLE-BUFFER
[  2988.755] (II) Initializing extension RECORD
[  2988.756] (II) Initializing extension DPMS
[  2988.758] (II) Initializing extension Present
[  2988.759] (II) Initializing extension DRI3
[  2988.760] (II) Initializing extension X-Resource
[  2988.761] (II) Initializing extension XVideo
[  2988.762] (II) Initializing extension XVideo-MotionCompensation
[  2988.762] (II) Initializing extension GLX
[  2988.777] (II) AIGLX: Loaded and initialized i965
[  2988.777] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2988.777] (II) Initializing extension XFree86-VidModeExtension
[  2988.778] (II) Initializing extension XFree86-DGA
[  2988.779] (II) Initializing extension XFree86-DRI
[  2988.779] (II) Initializing extension DRI2
[  2988.782] (II) modeset(0): Damage tracking initialized
[  2988.782] (II) modeset(0): Setting screen physical size to 361 x 203
[  2989.000] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2989.000] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2989.000] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2989.000] (**) Power Button: Applying InputClass "system-keyboard"
[  2989.000] (II) LoadModule: "libinput"
[  2989.001] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2989.023] (II) Module libinput: vendor="X.Org Foundation"
[  2989.023] 	compiled for 1.21.1, module version = 1.2.0
[  2989.023] 	Module class: X.Org XInput Driver
[  2989.023] 	ABI class: X.Org XInput driver, version 24.4
[  2989.023] (II) Using input driver 'libinput' for 'Power Button'
[  2989.029] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 22 paused 0
[  2989.030] (**) Power Button: always reports core events
[  2989.030] (**) Option "Device" "/dev/input/event2"
[  2989.031] (**) Option "_source" "server/udev"
[  2989.041] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  2989.041] (II) event2  - Power Button: device is a keyboard
[  2989.042] (II) event2  - Power Button: device removed
[  2989.042] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  2989.043] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2989.043] (**) Option "xkb_layout" "latam"
[  2989.115] (II) event2  - Power Button: is tagged by udev as: Keyboard
[  2989.115] (II) event2  - Power Button: device is a keyboard
[  2989.118] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[  2989.118] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[  2989.118] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[  2989.118] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[  2989.118] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[  2989.124] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[  2989.124] (**) Asus Wireless Radio Control: always reports core events
[  2989.124] (**) Option "Device" "/dev/input/event4"
[  2989.124] (**) Option "_source" "server/udev"
[  2989.130] (II) event4  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[  2989.130] (II) event4  - Asus Wireless Radio Control: device is a keyboard
[  2989.131] (II) event4  - Asus Wireless Radio Control: device removed
[  2989.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8/event4"
[  2989.131] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[  2989.131] (**) Option "xkb_layout" "latam"
[  2989.141] (II) event4  - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[  2989.141] (II) event4  - Asus Wireless Radio Control: device is a keyboard
[  2989.147] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[  2989.147] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2989.147] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2989.147] (**) Video Bus: Applying InputClass "system-keyboard"
[  2989.147] (II) Using input driver 'libinput' for 'Video Bus'
[  2989.150] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 26 paused 0
[  2989.150] (**) Video Bus: always reports core events
[  2989.150] (**) Option "Device" "/dev/input/event7"
[  2989.150] (**) Option "_source" "server/udev"
[  2989.160] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[  2989.161] (II) event7  - Video Bus: device is a keyboard
[  2989.161] (II) event7  - Video Bus: device removed
[  2989.161] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event7"
[  2989.161] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  2989.162] (**) Option "xkb_layout" "latam"
[  2989.166] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[  2989.167] (II) event7  - Video Bus: device is a keyboard
[  2989.170] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  2989.170] (II) No input driver specified, ignoring this device.
[  2989.170] (II) This device may have been added with another device file.
[  2989.173] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[  2989.173] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  2989.173] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  2989.173] (**) Sleep Button: Applying InputClass "system-keyboard"
[  2989.173] (II) Using input driver 'libinput' for 'Sleep Button'
[  2989.180] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 27 paused 0
[  2989.181] (**) Sleep Button: always reports core events
[  2989.181] (**) Option "Device" "/dev/input/event1"
[  2989.181] (**) Option "_source" "server/udev"
[  2989.186] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[  2989.186] (II) event1  - Sleep Button: device is a keyboard
[  2989.186] (II) event1  - Sleep Button: device removed
[  2989.187] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[  2989.187] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  2989.187] (**) Option "xkb_layout" "latam"
[  2989.192] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[  2989.192] (II) event1  - Sleep Button: device is a keyboard
[  2989.198] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam: USB2.0 V (/dev/input/event12)
[  2989.198] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "evdev keyboard catchall"
[  2989.198] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "libinput keyboard catchall"
[  2989.198] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "system-keyboard"
[  2989.198] (II) Using input driver 'libinput' for 'USB2.0 VGA UVC WebCam: USB2.0 V'
[  2989.201] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 28 paused 0
[  2989.202] (**) USB2.0 VGA UVC WebCam: USB2.0 V: always reports core events
[  2989.202] (**) Option "Device" "/dev/input/event12"
[  2989.202] (**) Option "_source" "server/udev"
[  2989.207] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[  2989.208] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[  2989.208] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[  2989.208] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19/event12"
[  2989.208] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam: USB2.0 V" (type: KEYBOARD, id 10)
[  2989.208] (**) Option "xkb_layout" "latam"
[  2989.213] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[  2989.213] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[  2989.216] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[  2989.216] (II) No input driver specified, ignoring this device.
[  2989.216] (II) This device may have been added with another device file.
[  2989.217] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[  2989.217] (II) No input driver specified, ignoring this device.
[  2989.217] (II) This device may have been added with another device file.
[  2989.219] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[  2989.219] (II) No input driver specified, ignoring this device.
[  2989.219] (II) This device may have been added with another device file.
[  2989.221] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[  2989.221] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  2989.221] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  2989.221] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[  2989.221] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  2989.224] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 29 paused 0
[  2989.224] (**) Asus WMI hotkeys: always reports core events
[  2989.224] (**) Option "Device" "/dev/input/event8"
[  2989.224] (**) Option "_source" "server/udev"
[  2989.232] (II) event8  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[  2989.232] (II) event8  - Asus WMI hotkeys: device is a keyboard
[  2989.232] (II) event8  - Asus WMI hotkeys: device removed
[  2989.232] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
[  2989.232] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[  2989.232] (**) Option "xkb_layout" "latam"
[  2989.235] (II) event8  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[  2989.236] (II) event8  - Asus WMI hotkeys: device is a keyboard
[  2989.238] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[  2989.238] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2989.238] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  2989.238] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  2989.238] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  2989.241] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 30 paused 0
[  2989.241] (**) AT Translated Set 2 keyboard: always reports core events
[  2989.242] (**) Option "Device" "/dev/input/event3"
[  2989.242] (**) Option "_source" "server/udev"
[  2989.246] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  2989.246] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[  2989.253] (II) event3  - AT Translated Set 2 keyboard: device removed
[  2989.254] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[  2989.254] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  2989.254] (**) Option "xkb_layout" "latam"
[  2989.257] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  2989.258] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[  2989.263] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[  2989.263] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[  2989.263] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[  2989.263] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[  2989.271] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
[  2989.271] (**) ETPS/2 Elantech Touchpad: always reports core events
[  2989.271] (**) Option "Device" "/dev/input/event6"
[  2989.271] (**) Option "_source" "server/udev"
[  2989.275] (II) event6  - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[  2989.281] (II) event6  - ETPS/2 Elantech Touchpad: device is a touchpad
[  2989.281] (II) event6  - ETPS/2 Elantech Touchpad: device removed
[  2989.282] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event6"
[  2989.283] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[  2989.288] (**) Option "AccelerationScheme" "none"
[  2989.288] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[  2989.288] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  2989.288] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  2989.291] (II) event6  - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[  2989.296] (II) event6  - ETPS/2 Elantech Touchpad: device is a touchpad
[  2989.298] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  2989.298] (II) No input driver specified, ignoring this device.
[  2989.299] (II) This device may have been added with another device file.
[  2989.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[  2989.300] (II) No input driver specified, ignoring this device.
[  2989.300] (II) This device may have been added with another device file.
[  2991.378] (II) modeset(0): EDID vendor "CMN", prod id 5267
[  2991.378] (II) modeset(0): Printing DDC gathered Modelines:
[  2991.378] (II) modeset(0): Modeline "1366x768"x0.0   76.42  1366 1434 1479 1592  768 772 779 800 -hsync -vsync (48.0 kHz eP)
[  3007.477] (II) modeset(0): EDID vendor "CMN", prod id 5267
[  3007.477] (II) modeset(0): Printing DDC gathered Modelines:
[  3007.477] (II) modeset(0): Modeline "1366x768"x0.0   76.42  1366 1434 1479 1592  768 772 779 800 -hsync -vsync (48.0 kHz eP)
[  3154.503] (**) Option "fd" "22"
[  3154.503] (II) event2  - Power Button: device removed
[  3154.504] (**) Option "fd" "25"
[  3154.504] (II) event4  - Asus Wireless Radio Control: device removed
[  3154.504] (**) Option "fd" "26"
[  3154.504] (II) event7  - Video Bus: device removed
[  3154.504] (**) Option "fd" "27"
[  3154.504] (II) event1  - Sleep Button: device removed
[  3154.504] (**) Option "fd" "28"
[  3154.504] (II) event12 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[  3154.504] (**) Option "fd" "29"
[  3154.505] (II) event8  - Asus WMI hotkeys: device removed
[  3154.505] (**) Option "fd" "30"
[  3154.505] (II) event3  - AT Translated Set 2 keyboard: device removed
[  3154.505] (**) Option "fd" "31"
[  3154.521] (II) event6  - ETPS/2 Elantech Touchpad: device removed
[  3154.563] (II) UnloadModule: "libinput"
[  3154.563] (II) systemd-logind: releasing fd for 13:70
[  3154.997] (II) UnloadModule: "libinput"
[  3154.998] (II) systemd-logind: releasing fd for 13:67
[  3155.039] (II) UnloadModule: "libinput"
[  3155.039] (II) systemd-logind: releasing fd for 13:72
[  3155.065] (II) UnloadModule: "libinput"
[  3155.065] (II) systemd-logind: releasing fd for 13:76
[  3155.069] (II) UnloadModule: "libinput"
[  3155.069] (II) systemd-logind: releasing fd for 13:65
[  3155.071] (II) UnloadModule: "libinput"
[  3155.071] (II) systemd-logind: releasing fd for 13:71
[  3155.073] (II) UnloadModule: "libinput"
[  3155.073] (II) systemd-logind: releasing fd for 13:68
[  3155.077] (II) UnloadModule: "libinput"
[  3155.077] (II) systemd-logind: releasing fd for 13:66
[  3155.111] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  3155.111] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  3155.171] (II) Server terminated successfully (0). Closing log file.

anything unusual?

I just ran retroarch on x11 and realiced that instead of calling it black and blue is more accurrate to say that the green color is not being displayer, on the legend of zelda and retroarch the blue and red elements are presented (albeit with a satured look) but the green is nowhere to be found, is there any setting that could cause such issue? and no, is not a hardware problem, wayland works fine.

Yochanan · 2 December 2021 01:00

Please do not post multiple times in a row. Instead, edit your previous post. I’ve merged your consecutive posts.

I’ve also edited your first post to make it more legible. Please separate code blocks with the backticks above and below the text, not inline.

Tian · 2 December 2021 01:23

Sorry and thanks

Tian · 2 December 2021 03:10

Fixed, it was the gnome color calibration, no idea why, when or how it was activated but after disabling it on wayland the x11 session works fine, what still bothers me is when you create a new account should not all settings be at the default on that new account? anyway thanks for your time

system · 4 December 2021 17:10

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.