Gigabyte product: B550 Fails to Sleep

That would be described here

:+1:

2 Likes

@Fabby
Okay, so I created the swap data. However, it still will not sleep. When I type the command to hibernate it, it seems to work, but then acts as if the system is restarting. Also, here’s what my system is.

System:
  Kernel: 5.10.63-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 
  root=UUID=533c52de-13af-4cd5-823c-29dcf5513486 rw quiet apparmor=1 
  security=apparmor udev.log_priority=3 
  Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Desktop System: Gigabyte product: B550 VISION D v: -CF 
  serial: <filter> 
  Mobo: Gigabyte model: B550 VISION D serial: <filter> 
  UEFI: American Megatrends LLC. v: F13g date: 03/25/2021 
Battery:
  Message: No system battery data found. Is one present? 
Memory:
  RAM: total: 62.81 GiB used: 2.59 GiB (4.1%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 8-Core model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3 
  family: 19 (25) model-id: 21 (33) stepping: 0 microcode: A201009 cache: 
  L2: 4 MiB bogomips: 121426 
  Speed: 2195 MHz min/max: 2200/3800 MHz boost: enabled Core speeds (MHz): 
  1: 2195 2: 2195 3: 2196 4: 2195 5: 2194 6: 2190 7: 2196 8: 2181 9: 2195 
  10: 2189 11: 2195 12: 2189 13: 2188 14: 2187 15: 2195 16: 2195 
  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1 
  bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy 
  constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total cqm_occup_llc 
  cr8_legacy cx16 cx8 de decodeassists erms extapic extd_apicid f16c 
  flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht hw_pstate ibpb ibrs ibs 
  invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor 
  movbe msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx ospke osvw 
  overflow_recov pae pat pausefilter pclmulqdq pdpe1gb perfctr_core 
  perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt pse pse36 rdpid rdpru 
  rdrand rdseed rdt_a rdtscp rep_good sep sha_ni skinit smap smca smep ssbd 
  sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor svm svm_lock syscall tce 
  topoext tsc tsc_scale umip v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall 
  vpclmulqdq wbnoinvd wdt xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, 
  STIBP: always-on, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: AMD Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] 
  vendor: Micro-Star MSI driver: amdgpu v: kernel bus-ID: 55:00.0 
  chip-ID: 1002:73bf class-ID: 0300 
  Device-2: EVGA EVGA XR1 Capture Box type: USB driver: snd-usb-audio,uvcvideo 
  bus-ID: 2-2:2 chip-ID: 3842:3103 class-ID: 0102 serial: <filter> 
  Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: 
  loaded: amdgpu,ati unloaded: modesetting,radeon alternate: fbdev,vesa 
  display-ID: :0 screens: 1 
  Screen-1: 0 s-res: 4480x2160 s-dpi: 96 s-size: 1185x571mm (46.7x22.5") 
  s-diag: 1315mm (51.8") 
  Monitor-1: DisplayPort-0 res: 2560x1440 hz: 240 dpi: 109 
  size: 597x336mm (23.5x13.2") diag: 685mm (27") 
  Monitor-2: DisplayPort-1 res: 1920x1080 hz: 60 dpi: 92 
  size: 531x299mm (20.9x11.8") diag: 609mm (24") 
  Monitor-3: HDMI-A-0 res: 1920x1080 hz: 60 dpi: 166 
  size: 294x165mm (11.6x6.5") diag: 337mm (13.3") 
  OpenGL: renderer: AMD Radeon RX 6900 XT (SIENNA_CICHLID DRM 3.40.0 
  5.10.63-1-MANJARO LLVM 12.0.1) 
  v: 4.6 Mesa 21.2.1 direct render: Yes 
Audio:
  Device-1: AMD Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT] 
  driver: snd_hda_intel v: kernel bus-ID: 55:00.1 chip-ID: 1002:ab28 
  class-ID: 0403 
  Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte 
  driver: snd_hda_intel v: kernel bus-ID: 57:00.4 chip-ID: 1022:1487 
  class-ID: 0403 
  Device-3: Conexant Systems (Rockwell) Hi-Res Audio type: USB 
  driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-8:8 chip-ID: 0572:1b09 
  class-ID: 0300 serial: <filter> 
  Device-4: EVGA EVGA XR1 Capture Box type: USB driver: snd-usb-audio,uvcvideo 
  bus-ID: 2-2:2 chip-ID: 3842:3103 class-ID: 0102 serial: <filter> 
  Sound Server-1: ALSA v: k5.10.63-1-MANJARO running: yes 
  Sound Server-2: JACK v: 1.9.19 running: no 
  Sound Server-3: PulseAudio v: 15.0 running: yes 
  Sound Server-4: PipeWire v: 0.3.35 running: yes 
Network:
  Device-1: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel 
  port: e000 bus-ID: 50:00.0 chip-ID: 8086:1539 class-ID: 0200 
  IF: enp80s0 state: down mac: <filter> 
  Device-2: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel 
  port: d000 bus-ID: 51:00.0 chip-ID: 8086:1539 class-ID: 0200 
  IF: enp81s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: dynamic noprefixroute scope: global 
  IP v6: <filter> type: dynamic noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  Device-3: Intel Wi-Fi 6 AX200 driver: N/A modules: iwlwifi port: d000 
  bus-ID: 52:00.0 chip-ID: 8086:2723 class-ID: 0280 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 
  bus-ID: 1-6.1:7 chip-ID: 8087:0029 class-ID: e001 
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 
  lmp-v: 5.1 sub-v: 100 hci-v: 5.1 rev: 100 
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff 
  link-mode: slave accept 
  service-classes: rendering, capturing, object transfer, audio, telephony 
Logical:
  Message: No logical block device data found. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 20.07 TiB used: 4.72 TiB (23.5%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung 
  model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B 
  logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> 
  rev: 2B2QEXM7 temp: 44.9 C scheme: GPT 
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST10000NM001G-2MW103 
  size: 9.1 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s 
  type: HDD rpm: 7200 serial: <filter> rev: SN03 scheme: GPT 
  ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital 
  model: WD My Book 25EE size: 9.1 TiB block-size: physical: 4096 B 
  logical: 512 B type: N/A serial: <filter> rev: 4009 scheme: GPT 
  ID-4: /dev/sdd maj-min: 8:48 type: USB vendor: SanDisk model: Ultra Fit 
  size: 57.84 GiB block-size: physical: 512 B logical: 512 B type: N/A 
  serial: <filter> rev: 1.00 scheme: GPT 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Optical-1: /dev/sr0 vendor: ASUS model: BW-16D1HT rev: 3.10 dev-links: cdrom 
  Features: speed: 48 multisession: yes audio: yes dvd: yes 
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
Partition:
  ID-1: / raw-size: 732.42 GiB size: 719.86 GiB (98.28%) 
  used: 25.92 GiB (3.6%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 
  label: MANJARO uuid: 533c52de-13af-4cd5-823c-29dcf5513486 
  ID-2: /boot/efi raw-size: 200 MiB size: 196 MiB (98.00%) 
  used: 24.9 MiB (12.7%) fs: vfat dev: /dev/nvme0n1p3 maj-min: 259:3 
  label: WINEFI uuid: 64D7-0DE0 
  ID-3: /run/media/wayne/Gaming raw-size: 5.72 TiB size: 5.72 TiB (100.00%) 
  used: 1.78 TiB (31.1%) fs: ntfs dev: /dev/sda2 maj-min: 8:2 label: Gaming 
  uuid: 6466086B66083FF2 
  ID-4: /run/media/wayne/Linux Data raw-size: 3.26 TiB size: 3.2 TiB (98.40%) 
  used: 288.87 GiB (8.8%) fs: ext4 dev: /dev/sda3 maj-min: 8:3 
  label: Linux Data uuid: c90b7810-45c2-4f04-8689-cd0254bf3e39 
  ID-5: /run/media/wayne/My Book raw-size: 9.1 TiB size: 9.1 TiB (100.00%) 
  used: 2.63 TiB (29.0%) fs: ntfs dev: /dev/sdb2 maj-min: 8:18 label: My Book 
  uuid: A4D445EBD445BFF2 
Swap:
  Alert: No swap data was found. 
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 300 MiB fs: vfat label: N/A 
  uuid: C11E-6C02 
  ID-2: /dev/nvme0n1p4 maj-min: 259:4 size: 128 MiB fs: <superuser required> 
  label: N/A uuid: N/A 
  ID-3: /dev/nvme0n1p5 maj-min: 259:5 size: 1.1 TiB fs: ntfs label: Windows 
  uuid: 5D85DC3C2CE42FC7 
  ID-4: /dev/sda1 maj-min: 8:1 size: 128 MiB fs: <superuser required> 
  label: N/A uuid: N/A 
  ID-5: /dev/sda4 maj-min: 8:4 size: 67.06 GiB fs: swsuspend label: N/A 
  uuid: 1e240563-85d6-4e47-a4fb-217ee074e4c6 
  ID-6: /dev/sdb1 maj-min: 8:17 size: 16 MiB fs: <superuser required> 
  label: N/A uuid: N/A 
  ID-7: /dev/sdd1 maj-min: 8:49 size: 15.62 GiB fs: vfat label: MINSTALL 
  uuid: 17FE-1A7D 
  ID-8: /dev/sdd2 maj-min: 8:50 size: 15.62 GiB fs: vfat label: WININSTALL 
  uuid: 187D-060E 
  ID-9: /dev/sdd3 maj-min: 8:51 size: 26.59 GiB fs: ntfs label: N/A 
  uuid: 017A8B19771B0D28 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 1-4:2 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  power: 100mA chip-ID: 1a40:0101 class-ID: 0900 
  Device-1: 1-4.4:4 info: Alcor Micro Multi Flash Reader type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 100mA 
  chip-ID: 058f:6366 class-ID: 0806 serial: <filter> 
  Device-2: 1-5:3 info: Logitech G502 Proteus Spectrum Optical Mouse 
  type: Mouse,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 
  speed: 12 Mb/s power: 300mA chip-ID: 046d:c332 class-ID: 0300 
  serial: <filter> 
  Hub-3: 1-6:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  power: 100mA chip-ID: 05e3:0608 class-ID: 0900 
  Device-1: 1-6.1:7 info: Intel AX200 Bluetooth type: Bluetooth driver: btusb 
  interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0029 
  class-ID: e001 
  Device-2: 1-7:6 info: Integrated Express ITE Device type: HID 
  driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s 
  power: 100mA chip-ID: 048d:5702 class-ID: 0300 
  Device-3: 1-8:8 info: Conexant Systems (Rockwell) Hi-Res Audio 
  type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 3 
  rev: 2.0 speed: 12 Mb/s power: 28mA chip-ID: 0572:1b09 class-ID: 0300 
  serial: <filter> 
  Hub-4: 1-10:9 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s 
  power: 100mA chip-ID: 05e3:0608 class-ID: 0900 
  Device-1: 1-10.1:10 info: SanDisk Ultra Fit type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s power: 224mA 
  chip-ID: 0781:5583 class-ID: 0806 serial: <filter> 
  Device-2: 1-10.3:11 info: Cooler Master ARGB Box type: HID,Keyboard 
  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s 
  power: 100mA chip-ID: 2516:1011 class-ID: 0300 serial: <filter> 
  Device-3: 1-10.4:12 info: Microsoft Xbox One Controller (Firmware 2015) 
  type: <vendor specific> driver: xpad interfaces: 3 rev: 2.0 speed: 12 Mb/s 
  power: 500mA chip-ID: 045e:02dd class-ID: ff00 serial: <filter> 
  Hub-5: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Device-1: 2-2:2 info: EVGA EVGA XR1 Capture Box type: Video,Audio 
  driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 3.0 speed: 5 Gb/s 
  power: 600mA chip-ID: 3842:3103 class-ID: 0102 serial: <filter> 
  Hub-6: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-7: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.1 speed: 10 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-8: 5-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Device-1: 5-2:2 info: Microsoft Natural Ergonomic Keyboard 4000 V1.0 
  type: Keyboard,HID driver: microsoft,usbhid interfaces: 2 rev: 2.0 
  speed: 1.5 Mb/s power: 100mA chip-ID: 045e:00db class-ID: 0300 
  Hub-9: 5-3:3 info: Genesys Logic Hub ports: 2 rev: 2.1 speed: 480 Mb/s 
  chip-ID: 05e3:0610 class-ID: 0900 
  Device-1: 5-4:4 info: Tablet Monitor type: Mouse,HID driver: uclogic,usbhid 
  interfaces: 3 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 256c:006d 
  class-ID: 0300 
  Hub-10: 6-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 
  speed: 10 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 
  Device-1: 6-1:2 info: Western Digital My Book 25EE type: Mass Storage 
  driver: usb-storage interfaces: 1 rev: 3.1 speed: 5 Gb/s power: 8mA 
  chip-ID: 1058:25ee class-ID: 0806 serial: <filter> 
  Hub-11: 6-3:3 info: Genesys Logic USB3.1 Hub ports: 2 rev: 3.2 speed: 5 Gb/s 
  chip-ID: 05e3:0620 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 35.5 C mobo: N/A gpu: amdgpu temp: 42.0 C 
  mem: 40.0 C 
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 0 
Info:
  Processes: 374 Uptime: 1m wakeups: 0 Init: systemd v: 249 tool: systemctl 
  Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1422 lib: 402 
  flatpak: 0 Shell: Zsh v: 5.8 default: Bash v: 5.1.8 running-in: konsole 
  inxi: 3.3.06 
1 Like

Well, but:

Are you sure that you activate it?

Try to suspend on the terminal:

systemctl suspend

Normally a swapfile/partition is not need for suspending.

About hibernation:

1 Like

@megavolt
I followed the instructions (or so I thought), and it’s showing as inactive. Where am I going wrong?


1 Like

Erm… look at the fstab file and think again… every line starts with UUID or /dev/ … so do you really think that a line which starts with sudo bash is in any way correct? It is a command which adds the line, not line itself. Understand? Run it on the terminal.

@megavolt Listen. I’m a little new to this Linux thing, so I’m not exactly familiar with the command line. In any case, I went ahead and ran it in the terminal. How long should I wait for this?

Ok no problem… then do it manually:

  1. This will print the UUID. Run it on terminal:
lsblk -no UUID /dev/sda4
  1. Now open the fstab file as root and add a new line there:
UUID=<paste the UUID here> none swap defaults 0 0
  1. Remove the wrong line.
  2. This activates the swap:
sudo swapon /dev/sda4

:wink:

Normally 50ms… there must be a problem with bash or the syntax is wrong (maybe hidden symbols pasted in?). Maybe not installed? I see you use zsh.

@megavolt All right I went ahead and did that, and the lights on my PC turn off for a split second and then came back on.

 /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system>             <mount point>  <type>  <options>  <dump>  <pass>
UUID=533c52de-13af-4cd5-823c-29dcf5513486 /              ext4    defaults,noatime 0 1
UUID=64D7-0DE0                            /boot/efi      vfat    umask=0077 0 2
UUID=44259802-2967-44c7-b17f-49f8843585b4 none swap defaults 0 0
/dev/disk/by-uuid/c90b7810-45c2-4f04-8689-cd0254bf3e39 /run/media/wayne/Linux\040Data/ auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/usb-WD_My_Book_25EE_3444475448504B5A-0:0-part2 /run/media/wayne/My\040Book/ auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-uuid/6466086B66083FF2 /run/media/wayne/Gaming/ auto nosuid,nodev,nofail,x-gvfs-show 0 0

erm… sorry, but what did you do? Typing the command

would not do this.

Please be more precise.

Also please, don’t put pictures of text in here. Copy and paste the text here as code with 3 backticks ` or tilde ~ on top and below. Like this:

code

Thanks.

@megavolt Sorry. When I clicked on the sleep button in the start menu.

@thecrimsoneye I am not familiar of what KDE would trigger at this button and where you can configure it, but this command should do suspend/sleep:

Run it on the terminal. Then you can be sure that its is not a problem of systemd.

@megavolt All right I entered the command, and now my computer seems to be in limbo. The displays are blank, but the computer LEDs are still on and the fans are spinning.

Ok, so there is a problem… the log would say more…

Reboot and enter this for the log of the previous boot:

journalctl --boot -1 --no-hostname --no-pager

If it is too long for pasting it here, upload it like that:

journalctl --boot -1 --no-hostname --no-pager | curl -F'file=@-' https://0x0.st

It will print a link on the terminal.

@megavolt Yeah it’s a long one…
https://0x0.st/-3_r.txt

So ok… now I see that the problem is the amdgpu module. Here is problematic part:

Sep 18 22:57:59 kernel: amdgpu 0000:55:00.0: amdgpu: Msg issuing pre-check failed and SMU may be not in the right state!
Sep 18 22:57:59 kernel: amdgpu 0000:55:00.0: amdgpu: Failed to enable gfxoff!
[...]
Sep 18 22:58:09 kernel: [drm:transmitter_control_v1_6 [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
Sep 18 22:58:09 kernel: [drm:set_pixel_clock_v7 [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
Sep 18 22:58:09 kernel: [drm:transmitter_control_v1_6 [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
Sep 18 22:58:09 kernel: [drm:set_pixel_clock_v7 [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
Sep 18 22:58:09 kernel: [drm:transmitter_control_v1_6 [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
Sep 18 22:58:09 kernel: [drm] free PSP TMR buffer
Sep 18 22:58:09 kernel: amdgpu 0000:55:00.0: amdgpu: MODE1 reset
Sep 18 22:58:09 kernel: amdgpu 0000:55:00.0: amdgpu: GPU smu mode1 reset
Sep 18 22:58:09 kernel: amdgpu 0000:55:00.0: amdgpu: Msg issuing pre-check failed and SMU may be not in the right state!
Sep 18 22:58:09 kernel: amdgpu 0000:55:00.0: amdgpu: GPU mode1 reset failed
Sep 18 22:58:09 kernel: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x40 [amdgpu] returns -5
Sep 18 22:58:09 kernel: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xb0 returns -5
Sep 18 22:58:09 kernel: PM: Device 0000:55:00.0 failed to freeze async: error -5
[...]
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!
Sep 18 22:58:09 kernel: amdgpu: Move buffer fallback to memcpy unavailable
Sep 18 22:58:09 kernel: [drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to process the buffer list -19!

I am not sure, but it seems to be a bug here.

Try to disable dpm (dynamic power management) by adding amdgpu.dpm=0 to the kernel parameter.

Open the grub config:

sudo nano /etc/default/grub

and add amdgpu.dpm=0 to the variable GRUB_CMDLINE_LINUX_DEFAULT=.

Then run sudo update-grub and reboot.

You can set the performance like that manually for now:

echo "high" | sudo tee -a /sys/class/drm/card0/device/power_dpm_force_performance_level
echo "low" | sudo tee -a /sys/class/drm/card0/device/power_dpm_force_performance_level

It looks like that the problem is related to this open bug: [navi2][5.10.20] amdgpu module crash on RX 6900 XT card (#1519) · Issues · drm / amd

However… maybe try kernel 5.4, since there are 4k pages used and not 64k, which seems to be a problem with this specific chipset.

sudo mhwd-kernel --install linux54

and choose on boot at the grub menu this kernel.

You missed a step and your kernel parameters should have resume=UUID=44259802-2967-44c7-b17f-49f8843585b4 (that’s yours)

Search for that here on the forum.

:crossed_fingers:

1 Like

Thanks @Fabby but the OP is asking for suspend and not hibernate. So that is in this case useless :slight_smile: If suspend (only RAM) does not work, then hibernate (only swap) will not work either.

1 Like

@megavolt I just tried everything you suggested, and the computer was stuck booting at that screen where it’s calculating the amount of files and the data.

REISUB and provide the following output:

journalctl --system --boot=0 --priority=err | tail --lines=35

:thinking:

Also please read this because of this and that. :stuck_out_tongue_winking_eye:

Welp. I had to reinstall Manjaro and I’ve redone everything up to including the swap partition int he fstab file. I should also note that in the Ubuntu live USB, I had the same issues.