FPS drop from 60 to 30

[seziumm]

Hello, Today I installed manjaro plasma desktop but when I have a maximazed window, fps drop from 60 to 30 fps. Or when I’m doing nothing fps drop. I can only get them up if I open the Konsole. What can I do?

sudo inxi --admin --verbosity=7 --filter --no-host --width                
System:
  Kernel: 6.5.13-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.5-x86_64
    root=UUID=d01c9a61-40f0-489a-83da-27a49cc912ce rw quiet splash
    udev.log_priority=3
  Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 wm: kwin_x11 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: All Series v: N/A serial: N/A
  Mobo: ASUSTeK model: H81M-K v: Rev X.0x serial: <filter>
    BIOS: American Megatrends v: 1002 date: 08/12/2014
Battery:
  Message: No system battery data found. Is one present?
Memory:
  System RAM: total: 16 GiB available: 15.55 GiB used: 1.95 GiB (12.5%)
  Array-1: capacity: 16 GiB slots: 2 modules: 2 EC: None
    max-module-size: 8 GiB note: est.
  Device-1: ChannelA-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64
    manufacturer: Kingston part-no: 99U5471-054.A00LF serial: <filter>
  Device-2: ChannelB-DIMM0 type: DDR3 detail: synchronous size: 8 GiB
    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64
    manufacturer: Kingston part-no: 99U5471-056.A00LF serial: <filter>
CPU:
  Info: model: Intel Core i5-4460 socket: BGA1155 (1150) note: check bits: 64
    type: MCP arch: Haswell gen: core 4 level: v3 note: check built: 2013-15
    process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
    microcode: 0x28
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
    desc: 1x6 MiB
  Speed (MHz): avg: 1579 high: 3193 min/max: 800/3400 base/boost: 3200/3900
    scaling: driver: intel_cpufreq governor: schedutil volts: 1.2 V
    ext-clock: 100 MHz cores: 1: 798 2: 3193 3: 1530 4: 798 bogomips: 25549
  Flags: abm acpi aes aperfmperf apic arat arch_perfmon avx avx2 bmi1 bmi2
    bts clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64
    dtherm dts epb erms est f16c flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs
    ida invpcid invpcid_single lahf_lm lm mca mce md_clear mmx monitor movbe
    msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm pdpe1gb pebs
    pge pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sdbg sep smep
    ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tsc tsc_adjust
    tsc_deadline_timer vme x2apic xsave xsaveopt xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX unsupported
  Type: l1tf mitigation: PTE Inversion
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GP108 [GeForce GT 1030] vendor: Gigabyte driver: nvidia
    v: 545.29.06 alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current
    (as of 2023-11; EOL~2026-12-xx) arch: Pascal code: GP10x process: TSMC 16nm
    built: 2016-2021 pcie: gen: 2 speed: 5 GT/s lanes: 4 bus-ID: 01:00.0
    chip-ID: 10de:1d01 class-ID: 0300
  Display: server: X.Org v: 21.1.9 compositor: kwin_x11 driver: X:
    loaded: nvidia gpu: nvidia display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 101 s-size: 483x272mm (19.02x10.71")
    s-diag: 554mm (21.82") monitors: <missing: xrandr>
  Monitor-1: Unknown-1 size-res: N/A modes: 640x480
  API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
    drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia
    inactive: wayland,device-1
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 545.29.06
    glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce GT 1030/PCIe/SSE2
    memory: 1.95 GiB
  API: Vulkan v: 1.3.269 layers: 1 device: 0 type: discrete-gpu
    name: NVIDIA GeForce GT 1030 driver: nvidia v: 545.29.06 device-ID: 10de:1d01
    surfaces: xcb,xlib
Audio:
  Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: ASUSTeK 8
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
    class-ID: 0403
  Device-2: NVIDIA GP108 High Definition Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 4
    bus-ID: 01:00.1 chip-ID: 10de:0fb8 class-ID: 0403
  API: ALSA v: k6.5.13-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: JACK v: 1.9.22 status: off tools: N/A
  Server-2: PipeWire v: 1.0.0 status: n/a (root, process)
    with: pipewire-media-session status: active tools: pw-cli
  Server-3: PulseAudio v: 16.1 status: active (root, process)
    with: pulseaudio-alsa type: plugin tools: pacat,pactl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK H81M-C driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  WAN IP: <filter>
Bluetooth:
  Message: No bluetooth data found.
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 328.56 GiB used: 10.27 GiB (3.1%)
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3320820AS
    family: Barracuda 7200.10 size: 298.09 GiB block-size: physical: 512 B
    logical: 512 B speed: 3.0 Gb/s tech: N/A serial: <filter> fw-rev: D
    temp: 40 C scheme: MBR
  SMART: yes state: enabled health: PASSED on: 361d 13h cycles: 2137 Old-Age:
    UDMA CRC errors: 161 Pre-Fail: attribute: Spin_Retry_Count value: 100
    worst: 100 threshold: 97
  ID-2: /dev/sdb maj-min: 8:16 vendor: PNY model: USB 2.0 FD size: 30.47 GiB
    block-size: physical: 512 B logical: 512 B type: USB rev: 2.0 spd: 480 Mb/s
    lanes: 1 mode: 2.0 tech: N/A serial: <filter> fw-rev: 1100 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 298.09 GiB size: 292.35 GiB (98.07%) used: 10.27 GiB (3.5%)
    fs: ext4 block-size: 4096 B dev: /dev/sda1 maj-min: 8:1 label: N/A
    uuid: d01c9a61-40f0-489a-83da-27a49cc912ce
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 3.63 GiB fs: iso9660
  ID-2: /dev/sdb2 maj-min: 8:18 size: 4 MiB fs: vfat label: MISO_EFI
    uuid: EA58-776D
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:8000
    class-ID: 0900
  Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:8008
    class-ID: 0900
  Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Device-1: 3-1:2 info: BY Tech Gaming Keyboard type: keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 258a:0049 class-ID: 0300
  Device-2: 3-9:3 info: PNY Flash Drive type: mass storage
    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s)
    lanes: 1 mode: 2.0 power: 500mA chip-ID: 154b:005b class-ID: 0806
    serial: <filter>
  Device-3: 3-10:4 info: Razer USA DeathAdder Essential type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 1532:0098 class-ID: 0300
  Hub-6: 4-0:1 info: super-speed hub ports: 2 rev: 3.0
    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 33.0 C mobo: N/A gpu: nvidia temp: 28 C
  Fan Speeds (rpm): N/A gpu: nvidia fan: 41%
Info:
  Processes: 183 Uptime: 8m wakeups: 0 Init: systemd v: 254 default: graphical
  tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6 Packages: pm: pacman
  pkgs: 1107 libs: 313 tools: pamac pm: flatpak pkgs: 0 Shell: Sudo (sudo)
  v: 1.9.15p2 default: Bash v: 5.2.21 running-in: konsole inxi: 3.3.31

[andreas85]

Welcome to Manjaro!

1. Please read the information behind this link. It will help you to post necessary information.

[HowTo] Request support

Difficulty: ★☆☆☆☆ Strong of its many members, the Manjaro support forum can provide you help whenever you have an issue with your Manjaro installation. But in order to work efficiently, we shall also ask you to follow three major points. Provide context Simply signaling an issue is rarely enough to understand how it occurred. It is thus important to provide details on how it happened: Detail prior actions leading to the issue. List solutions and guides you already tried, with links when…

2. Please press the three dots … below your post and then press the

• If you give us information about your system, we can see what we’re talking about and make better suggestions.
• You can do this by using inxi in a terminal or in console.

sudo inxi --admin --verbosity=7 --filter --no-host --width

• Personally identifiable information such as serial numbers and MAC addresses are filtered out by this command
• Presenting the information in this way allows everyone to be familiar with the format and quickly find the items they need without missing anything.

3. Copy the output from inxi (including the command) and paste it into your post.

• To make it more readable, add 3 backticks ``` on an extra line before and after the pasted text.

[HowTo] Post command output and file content as formatted text

Difficulty: ★☆☆☆☆ Formatting differences Discourse – this forum’s engine – uses Markdown to format its posts, and removes “unnecessary” whitespace. Terminal commands often produce output formatted so that they are better readable by the user, taking advantage of the monospaced font used. Programming code often rely on indentation to make it more readable. Using preformatting in Markdown Markdown includes a pattern to provide preformatting when necessary. You only need to put the part to f…

Have you already for your problem in the forum ? (Wisdom lies in asking → listening → reading )

[weingeist]

@seziumm

Screen-1: 0 s-res: 1920x1080 s-dpi: 101 s-size: 483x272mm (19.02x10.71")
    s-diag: 554mm (21.82") monitors: <missing: xrandr>
  Monitor-1: Unknown-1 size-res: N/A modes: 640x480

Have you installed nvidia-settings ?

[seziumm]

Yes, I still have the same problem.
I had the same problem on Arch Linux, but I couldn’t fix it

[Aicse]

It is problem with 545 Nvidia driver. Add to your .bash_profile this:
export KWIN_X11_FORCE_SOFTWARE_VSYNC=1