With this update severe flickering at the edges of the screen with grid-like artifacts spanning the whole screen was introduced in full screen applications (mostly games). Previously a similar issue but without the grid-like artifacts occurred only in games based on the A4-Engine (Metro Series) and VLC. But now it also affects games based on UE4 (Deep Rock Galactic, The Mound Demo) and Gwenview. I would like to share a screenshot but the issue isn’t captured when taking one.
❯ inxi -v8z
System:
Kernel: 7.0.13-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 16.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-7.0-x86_64
root=UUID=2413756b-b507-4c4e-9d8e-06c30b85917f rw
cryptdevice=UUID=d6f489b2-4fa2-4ca6-a0b4-5f0e2b5306bd:luks-d6f489b2-4fa2-4ca6-a0b4-5f0e2b5306bd
root=/dev/mapper/luks-d6f489b2-4fa2-4ca6-a0b4-5f0e2b5306bd
udev.log_priority=3 lsm=landlock,lockdown,yama,integrity,apparmor,bpf
sysrq_always_enabled=1
Desktop: KDE Plasma v: 6.6.5 tk: Qt v: N/A info: frameworks v: 6.27.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Manjaro base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: PRO X870E-P WIFI (MS-7E70) v: 2.0
serial: <superuser required> uuid: <superuser required> Firmware: UEFI
vendor: American Megatrends LLC. v: 2.A31 date: 09/24/2025
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 64 GiB available: 60.38 GiB used: 6.24 GiB (10.3%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 128 GiB slots: 4 modules: 2 EC: None
max-module-size: 32 GiB note: est.
Device-1: DIMMA1 type: no module installed
Device-2: DIMMA2 type: DDR5 detail: synchronous unbuffered (unregistered)
size: 32 GiB speed: 4800 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: N/A
part-no: F5-6000J3040G32G serial: <filter>
Device-3: DIMMB1 type: no module installed
Device-4: DIMMB2 type: DDR5 detail: synchronous unbuffered (unregistered)
size: 32 GiB speed: 4800 MT/s volts: note: check curr: 1 min: 1 max: 1
width (bits): data: 64 total: 64 manufacturer: N/A
part-no: F5-6000J3040G32G serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 9800X3D bits: 64 type: MT MCP arch: Zen 5 gen: 5
level: v4 note: check built: 2024+ process: TSMC n4 (4nm) family: 0x1A (26)
model-id: 0x44 (68) stepping: 0 microcode: 0xB404035
Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
smt: enabled cache: L1: 640 KiB desc: d-8x48 KiB; i-8x32 KiB L2: 8 MiB
desc: 8x1024 KiB L3: 96 MiB desc: 1x96 MiB
Speed (MHz): avg: 603 min/max: 603/5272 boost: enabled scaling:
driver: amd-pstate-epp governor: performance cores: 1: 603 2: 603 3: 603
4: 603 5: 603 6: 603 7: 603 8: 603 9: 603 10: 603 11: 603 12: 603 13: 603
14: 603 15: 603 16: 603 bogomips: 150399
Flags: 3dnowprefetch abm adx aes amd_lbr_pmc_freeze amd_lbr_v2 aperfmperf
apic arat avic avx avx2 avx512_bf16 avx512_bitalg avx512_vbmi2
avx512_vnni avx512_vp2intersect avx512_vpopcntdq avx512bw avx512cd
avx512dq avx512f avx512ifma avx512vbmi avx512vl avx_vnni bmi1 bmi2 bpext
bus_lock_detect cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov
cmp_legacy constant_tsc cpb cppc cpuid cpuid_fault cqm cqm_llc
cqm_mbm_local cqm_mbm_total cqm_occup_llc cr8_legacy cx16 cx8 de
decodeassists erms extapic extd_apicid f16c flush_l1d flushbyasid fma fpu
fsgsbase fsrm fxsr fxsr_opt gfni ht hw_pstate ibpb ibrs ibrs_enhanced ibs
invpcid irperf lahf_lm lbrv lm mba mca mce misalignsse mmx mmxext monitor
movbe movdir64b movdiri msr mtrr mwaitx nonstop_tsc nopl npt nrip_save nx
ospke osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
perfctr_core perfctr_llc perfctr_nb perfmon_v2 pfthreshold pge pku pni
popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep
sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3
stibp succor svm svm_lock syscall tce topoext tsc tsc_adjust tsc_scale
umip user_shstk v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme
vmmcall vnmi vpclmulqdq wbnoinvd wdt x2avic xgetbv1 xsave xsavec
xsaveerptr xsaveopt xsaves xtopology
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: ghostwrite status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow mitigation: IBPB on VMEXIT only
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB:
conditional; STIBP: always-on; PBRSB-eIBRS: Not affected; BHI: Not
affected
Type: srbds status: Not affected
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape mitigation: IBPB on VMEXIT
Graphics:
Device-1: NVIDIA GB203 [GeForce RTX 5070 Ti] vendor: ASUSTeK driver: nvidia
v: 610.43.02 alternate: nouveau,nvidia_drm non-free: 550-580.xx+
status: current (as of 2025-11) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 5 speed: 32 GT/s lanes: 16
ports: active: DP-4,HDMI-A-2 empty: DP-5,DP-6 bus-ID: 01:00.0
chip-ID: 10de:2c05 class-ID: 0300
Device-2: Advanced Micro Devices [AMD/ATI] Granite Ridge [Radeon Graphics]
vendor: Micro-Star MSI driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: none empty: DP-1, DP-2, DP-3, HDMI-A-1,
Writeback-1 bus-ID: 7a:00.0 chip-ID: 1002:13c0 class-ID: 0300 temp: 43.0 C
Display: wayland server: X.org v: 1.21.1.23 with: Xwayland v: 24.1.12
compositor: kwin_wayland driver: X: loaded: nvidia
gpu: nv_platform,nvidia,nvidia-nvswitch d-rect: 3840x1080 display-ID: 0
Monitor-1: DP-4 pos: primary,left model: VG279 serial: <filter>
built: 2020 res: mode: 1920x1080 hz: 144 scale: 100% (1) dpi: 82 gamma: 1.2
chroma: red: x: 0.647 y: 0.341 green: x: 0.302 y: 0.639 blue: x: 0.149
y: 0.047 white: x: 0.314 y: 0.329 size: 598x336mm (23.54x13.23")
diag: 686mm (27") ratio: 16:9 modes: 1920x1080, 1680x1050, 1280x1024,
1440x900, 1280x960, 1280x800, 1152x864, 1280x720, 1024x768, 800x600,
720x576, 720x480, 640x480
Monitor-2: HDMI-A-2 pos: right model: Acer S222HQL serial: <filter>
built: 2011 res: mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 102 gamma: 1.2
chroma: red: x: 0.639 y: 0.349 green: x: 0.333 y: 0.604 blue: x: 0.145
y: 0.059 white: x: 0.314 y: 0.329 size: 477x268mm (18.78x10.55")
diag: 547mm (21.5") ratio: 16:9 modes: 1920x1080, 1280x1024, 1440x900,
1280x800, 1152x864, 1280x720, 1024x768, 800x600, 720x576, 720x480,
640x480
API: EGL v: 1.5 hw: drv: nvidia drv: amd radeonsi platforms: device: 0
drv: nvidia device: 2 drv: radeonsi device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia wayland: drv: nvidia x11: drv: nvidia
inactive: device-1
API: OpenGL v: 4.6.0 compat-v: 4.6 vendor: nvidia mesa v: 610.43.02
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 5070 Ti/PCIe/SSE2
memory: 15.55 GiB display-ID: :1.0
API: Vulkan v: 1.4.350 layers: 8 device: 0 type: discrete-gpu name: NVIDIA
GeForce RTX 5070 Ti driver: nvidia v: 610.43.02 device-ID: 10de:2c05
surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: nvidia-settings,nvidia-smi
wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: NVIDIA GB203 High Definition Audio driver: snd_hda_intel v: kernel
pcie: gen: 5 speed: 32 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:22e9
class-ID: 0403
Device-2: Advanced Micro Devices [AMD/ATI] Radeon High Definition Audio
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 7a:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-3: Advanced Micro Devices [AMD] Ryzen HD Audio
vendor: Micro-Star MSI driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 7a:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k7.0.13-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: JACK v: 1.9.22 status: off tools: N/A
Server-3: PipeWire v: 1.6.6 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8126 5GbE vendor: Micro-Star MSI driver: r8169
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 1 port: e000 bus-ID: 0e:00.0
chip-ID: 10ec:8126 class-ID: 0200
IF: enp14s0 state: down mac: <filter>
Device-2: Qualcomm WCN785x Wi-Fi 7 320MHz 2x2 [FastConnect 7800]
vendor: Foxconn Band Simultaneous Wireless driver: ath12k_wifi7_pci v: N/A
modules: ath12k_wifi7 pcie: gen: 3 speed: 8 GT/s lanes: 1 link-max:
lanes: 2 bus-ID: 0f:00.0 chip-ID: 17cb:1107 class-ID: 0280
IF: wlp15s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: proton0 state: unknown speed: N/A duplex: N/A mac: N/A
IP v4: <filter> type: noprefixroute scope: global
IF-ID-2: pvpnksintrf0 state: unknown speed: N/A duplex: N/A mac: <filter>
IP v4: <filter> type: noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
IF-ID-3: virbr0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
WAN IP: <filter>
Bluetooth:
Device-1: Foxconn / Hon Hai driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-6:2 chip-ID: 0489:e10a
class-ID: e001
Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
Device-1: luks-d6f489b2-4fa2-4ca6-a0b4-5f0e2b5306bd maj-min: 253:0
type: LUKS dm: dm-0 size: 150 GiB
Components:
p-1: nvme0n1p2 maj-min: 259:2 size: 150 GiB
Device-2: luks-9245fd73-c3e8-4b98-8ac2-e19b30d27a76 maj-min: 253:1
type: LUKS dm: dm-1 size: 1.67 TiB
Components:
p-1: nvme0n1p3 maj-min: 259:3 size: 1.67 TiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 4.55 TiB used: 1.82 TiB (40.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 9100 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 126 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 0B2QNXH7 temp: 35.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10EZEX-08WN4A0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 7200 serial: <filter>
fw-rev: 1A02 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DM008-2FR102
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: 0001 scheme: GPT
Optical-1: /dev/sr0 vendor: HL-DT-ST model: BD-RE BH16NS55 rev: 1.03
dev-links: cdrom
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
<Partiton Info>
Swap:
Alert: No swap data was found.
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-7:2 info: Micro Star MYSTIC LIGHT type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 0db0:0076 class-ID: 0300
serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 3-6:2 info: Foxconn / Hon Hai type: bluetooth driver: btusb
interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
power: 100mA chip-ID: 0489:e10a class-ID: e001
Device-2: 3-10:3 info: Logitech G502 SE HERO Gaming Mouse type: mouse,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 300mA chip-ID: 046d:c08b class-ID: 0300
serial: <filter>
Device-3: 3-12:4 info: Logitech G710 Gaming Keyboard type: keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 400mA chip-ID: 046d:c24d class-ID: 0300
Hub-4: 4-0:1 info: super-speed hub ports: 5 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-6: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
class-ID: 0900
Hub-7: 7-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-8: 8-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-9: 9-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-10: 10-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-11: 11-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Sensors:
System Temperatures: cpu: 48.0 C mobo: 38.0 C gpu: amdgpu temp: 43.0 C
Fan Speeds (rpm): N/A
Repos:
Packages: pm: pacman pkgs: 1793 libs: 435 tools: octopi,pamac pm: flatpak
pkgs: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://manjaro.mirror.wearetriple.com/stable/$repo/$arch
2: https://ftp.snt.utwente.nl/pub/linux/manjaro/stable/$repo/$arch
3: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
4: https://manjaro.mirrors.lavatech.top/stable/$repo/$arch
5: https://mirror.23m.com/manjaro/stable/$repo/$arch
6: https://ipng.mm.fcix.net/manjaro/stable/$repo/$arch
7: https://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/stable/$repo/$arch
8: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/stable/$repo/$arch
9: https://ftp.belnet.be/mirrors/manjaro/repos/stable/$repo/$arch
10: https://ftp.gwdg.de/pub/linux/manjaro/stable/$repo/$arch
11: https://mirror.bakertelekom.fr/manjaro/stable/$repo/$arch
12: https://mirror.futureweb.be/manjaro/stable/$repo/$arch
13: https://mirror.init7.net/manjaro/stable/$repo/$arch
14: https://ftp.free.org/mirrors/repo.manjaro.org/repos/stable/$repo/$arch
15: https://mirrors.dotsrc.org/manjaro/stable/$repo/$arch
16: https://mirror.alpix.eu/manjaro/stable/$repo/$arch
17: https://ftp.halifax.rwth-aachen.de/manjaro/stable/$repo/$arch
18: https://mirror.easyname.at/manjaro/stable/$repo/$arch
19: https://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch
20: https://mirror.raiolanetworks.com/manjaro/stable/$repo/$arch
21: https://mirror.alwyzon.net/manjaro/stable/$repo/$arch
22: https://mirror1.sox.rs/manjaro/stable/$repo/$arch
23: https://mirror.dkm.cz/manjaro/stable/$repo/$arch
24: https://mirrors.eric.ovh/manjaro/stable/$repo/$arch
25: https://ftp.lysator.liu.se/pub/manjaro/stable/$repo/$arch
26: https://mirrors.ft.uam.es/manjaro/stable/$repo/$arch
27: https://distrohub.kyiv.ua/manjaro/stable/$repo/$arch
28: https://mirror.it4i.cz/manjaro/stable/$repo/$arch
29: https://ftpmirror1.infania.net/mirror/manjaro/stable/$repo/$arch
30: https://mirror.telepoint.bg/manjaro/stable/$repo/$arch
31: https://ftp.linux.org.tr/manjaro/stable/$repo/$arch
32: https://manjaro.mirror.garr.it/manjaro/stable/$repo/$arch
33: https://mirror.datacenter.by/pub/mirrors/manjaro/stable/$repo/$arch
34: https://mirror.yandex.ru/mirrors/manjaro/stable/$repo/$arch
35: https://fosszone.csd.auth.gr/manjaro/stable/$repo/$arch
36: https://ba.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
37: http://ftp.uni-kl.de/pub/linux/manjaro/stable/$repo/$arch
38: https://ct.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
39: https://manjaro.ipacct.com/manjaro/stable/$repo/$arch
40: https://ftp.cc.uoc.gr/mirrors/linux/manjaro/stable/$repo/$arch
41: https://mirror.bouwhuis.network/manjaro/stable/$repo/$arch
42: https://mirror.truenetwork.ru/manjaro/stable/$repo/$arch
43: https://ftp.psnc.pl/linux/manjaro/stable/$repo/$arch
44: https://manjaro.mirror-services.net/pub/stable/$repo/$arch
45: https://mirror.kamtv.ru/manjaro/stable/$repo/$arch
46: https://mirrors.up.pt/pub/manjaro/stable/$repo/$arch
<Process Info>
Info:
Processes: 539 Power: uptime: 1h 45m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 1 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 24.03 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 260 default: graphical
tool: systemctl
Compilers: clang: 22.1.6 gcc: 16.1.1 alt: 15 Shell: Zsh v: 5.9.1
running-in: konsole inxi: 3.3.40
While being loaded, the AMD-GPU is currently not used by anything. Every application gets rendered on the nVidia-GPU.
Replies on the 610 release feedback over on nVidia’s dev forum suggest the issue may be caused by VRR: 610 release feedback & discussion - #50 by Rnk0 - Linux - NVIDIA Developer Forums
Disabling Adaptive sync in the system’s settings (Display & Monitor -> Display Configuration -> <Display name>) reduces the issue to only occur in very low/unstable FPS situations (e.g. loading screens) at the cost of slightly unstable frame rates in games.
Edit: Changed the inxi output as suggested
