Hello. I am a new user of borg vorta.
I have setup backup of my /home folder. Recently I had mounted an external HDD on /home/Me/MountPoint
Thereafter daily incremental backup started as per schedule, and vorta started backup of entire external hdd to flood my backup folder /mnt/MyBackupMedia/Backup-using-borg-vorta/
Problem : After I manually deleted files of last backup, vorta has stopped daily incremental backup. I get “ERROR: Cache , or information obtained from the security directory is newer than repository - this is either a attack or unsafe (multiple repos with same ID)”
To resolve the issue, I followed Frequently asked questions — Borg - Deduplicating Archiver 1.2.6 documentation
borg config repo id
Repository /home/Me/repo does not exist.
I do have a folder named
/home/Me/.config/borg/security/c94bbf7402c738a97e27ee8522bc337a4c0666e43ea8368a121355bef8b934b5/
What is REPO / REPO_ID? I need hand holding to help me restart incremental backup. Thank you.
Here is Linux (Manjaro KDE Plasma) system information using inxi command :
System:
Kernel: 6.1.41-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1-x86_64
root=UUID=f3b83d2a-757a-4910-9d47-34478e12b69a rw rootflags=subvol=@ quiet
splash resume=UUID=bfbc27d0-b1c1-40cd-bc59-63d31357fc12
udev.log_priority=3
Desktop: KDE Plasma v: 5.27.6 tk: Qt v: 5.15.10 wm: kwin_wayland vt: 1
dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: OMEN by HP Gaming Laptop 16-n0xxx v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 8A42 v: 38.62 serial: <superuser required> UEFI: AMI
v: F.16 date: 03/20/2023
Battery:
ID-1: BAT0 charge: 62.5 Wh (87.4%) condition: 71.5/71.5 Wh (100.0%)
power: 32.5 W volts: 16.3 min: 15.4 model: HP Primary type: Li-ion
serial: <filter> status: discharging cycles: 6
Memory:
System RAM: total: 16 GiB note: est. available: 14.85 GiB
used: 6.72 GiB (45.2%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 7 6800H with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3+ gen: 4 level: v3 note: check built: 2022 process: TSMC n6 (7nm)
family: 0x19 (25) model-id: 0x44 (68) stepping: 1 microcode: 0xA404102
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB
desc: 1x16 MiB
Speed (MHz): avg: 1723 high: 4184 min/max: 1600/4784 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1600 2: 1396
3: 1415 4: 1399 5: 1747 6: 1518 7: 1394 8: 1600 9: 1811 10: 1425 11: 1600
12: 1600 13: 1506 14: 4184 15: 1781 16: 1600 bogomips: 102241
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 23 [Radeon RX 6650 XT / 6700S 6800S]
vendor: Hewlett-Packard driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16
ports: active: none empty: HDMI-A-1,eDP-1 bus-ID: 03:00.0
chip-ID: 1002:73ef class-ID: 0300
Device-2: AMD Rembrandt [Radeon 680M] vendor: Hewlett-Packard
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-2
empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, DP-7, DP-8 bus-ID: 08:00.0
chip-ID: 1002:1681 class-ID: 0300 temp: 42.0 C
Device-3: Luxvisions Innotech HP Wide Vision HD Camera driver: uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3:2
chip-ID: 30c9:0069 class-ID: fe01 serial: <filter>
Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.2
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu,amdgpu display-ID: 0
Monitor-1: eDP-2 res: 1920x1080 size: N/A modes: N/A
API: OpenGL v: 4.6 Mesa 23.0.4 renderer: AMD Radeon Graphics (rembrandt
LLVM 15.0.7 DRM 3.49 6.1.41-1-MANJARO) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 03:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Rembrandt Radeon High Definition Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 08:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x,
snd_pci_acp5x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 08:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-4: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 08:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.1.41-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.75 status: off with: wireplumber status: active
tools: pw-cli,wpctl
Server-3: PulseAudio v: 16.1 status: active with: pulseaudio-alsa
type: plugin tools: pacat,pactl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
vendor: Foxconn driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 06:00.0 chip-ID: 14c3:0616 class-ID: 0280
IF: wlp6s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: dynamic noprefixroute scope: global
IP v6: <filter> type: noprefixroute scope: link
WAN IP: <filter>
Bluetooth:
Device-1: Foxconn / Hon Hai Wireless_Device driver: btusb v: 0.8 type: USB
rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4:3 chip-ID: 0489:e0e0
class-ID: e001 serial: <filter>
Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 953.87 GiB used: 286.38 GiB (30.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVL21T0HCLR-00BH1
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: HPS3NGXH temp: 38.9 C
scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 683.59 GiB size: 683.59 GiB (100.00%)
used: 286.38 GiB (41.9%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
label: N/A uuid: f3b83d2a-757a-4910-9d47-34478e12b69a
ID-2: /boot/efi raw-size: 550 MiB size: 548.9 MiB (99.80%)
used: 580 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p8 maj-min: 259:8 label: N/A
uuid: 9E3C-6373
ID-3: /home raw-size: 683.59 GiB size: 683.59 GiB (100.00%)
used: 286.38 GiB (41.9%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
label: N/A uuid: f3b83d2a-757a-4910-9d47-34478e12b69a
ID-4: /var/cache raw-size: 683.59 GiB size: 683.59 GiB (100.00%)
used: 286.38 GiB (41.9%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
label: N/A uuid: f3b83d2a-757a-4910-9d47-34478e12b69a
ID-5: /var/log raw-size: 683.59 GiB size: 683.59 GiB (100.00%)
used: 286.38 GiB (41.9%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
label: N/A uuid: f3b83d2a-757a-4910-9d47-34478e12b69a
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 17.53 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p7 maj-min: 259:7 label: N/A
uuid: bfbc27d0-b1c1-40cd-bc59-63d31357fc12
Unmounted:
ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 260 MiB fs: vfat label: SYSTEM
uuid: 1A0F-3826
ID-2: /dev/nvme0n1p2 maj-min: 259:2 size: 16 MiB fs: <superuser required>
label: N/A uuid: N/A
ID-3: /dev/nvme0n1p3 maj-min: 259:3 size: 201.03 GiB fs: bitlocker
label: N/A uuid: N/A
ID-4: /dev/nvme0n1p4 maj-min: 259:4 size: 625 MiB fs: ntfs
label: Windows RE tools uuid: A0FA127AFA124CC2
ID-5: /dev/nvme0n1p5 maj-min: 259:5 size: 50.29 GiB fs: bitlocker
label: N/A uuid: N/A
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Device-1: 1-3:2 info: Luxvisions Innotech HP Wide Vision HD Camera
type: video driver: uvcvideo interfaces: 3 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
chip-ID: 30c9:0069 class-ID: fe01 serial: <filter>
Device-2: 1-4:3 info: Foxconn / Hon Hai Wireless_Device type: bluetooth
driver: btusb interfaces: 3 rev: 2.1 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
mode: 2.0 power: 100mA chip-ID: 0489:e0e0 class-ID: e001 serial: <filter>
Hub-2: 2-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 3 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-4: 3-2:2 info: Realtek RTS5411 Hub ports: 2 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0bda:5411
class-ID: 0900
Hub-5: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-6: 4-2:2 info: Realtek Hub ports: 2 rev: 3.2
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0bda:0411
class-ID: 0900
Hub-7: 5-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-8: 6-0:1 info: Linux Foundation 3.0 root hub ports: N/A rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-9: 7-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-10: 8-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-11: 9-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-12: 10-0:1 info: super-speed hub ports: 1 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 46.0 C mobo: N/A
Fan Speeds (RPM): fan-1: 2143 fan-2: 0
GPU: device: amdgpu temp: 42.0 C device: amdgpu temp: 43.0 C mem: 40.0 C
fan: 0 watts: 4.00
Repos:
Packages: 1241 pm: pacman pkgs: 1235 libs: 377 tools: pamac pm: flatpak
pkgs: 6
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.init7.net/manjaro/stable/$repo/$arch
2: https://ask4.mm.fcix.net/manjaro/stable/$repo/$arch
3: https://ftpmirror1.infania.net/mirror/manjaro/stable/$repo/$arch
Processes:
CPU top: 5 of 388
1: cpu: 18.8% command: firefox pid: 17874 mem: 658.6 MiB (4.3%)
2: cpu: 2.2% command: kwin_wayland pid: 17379 mem: 343.3 MiB (2.2%)
3: cpu: 2.2% command: kate pid: 22741 mem: 251.4 MiB (1.6%)
4: cpu: 1.7% command: xwayland pid: 17429 mem: 158.6 MiB (1.0%)
5: cpu: 1.5% command: firefox pid: 22503 mem: 243.2 MiB (1.5%)
Memory top: 5 of 388
1: mem: 662.3 MiB (4.3%) command: thunderbird pid: 18633 cpu: 0.7%
2: mem: 658.6 MiB (4.3%) command: firefox pid: 17874 cpu: 18.8%
3: mem: 414.4 MiB (2.7%) command: firefox pid: 18131 cpu: 0.3%
4: mem: 414.0 MiB (2.7%) command: firefox pid: 18159 cpu: 0.2%
5: mem: 369.9 MiB (2.4%) command: plasmashell pid: 17511 cpu: 0.3%
Info:
Processes: 388 Uptime: 13h 32m wakeups: 12709 Init: systemd v: 253
default: graphical tool: systemctl Compilers: gcc: 13.1.1 clang: 15.0.7
Shell: Zsh v: 5.9 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.28