Ethernet port doesn't work, driver is installed, not sure where to go from here

Support Network
1

From what I can see here there is a driver installed for the network adapter but for whatever reason the ethernet port itself is just unresponsive. IIRC this worked in a previous kernel but a bunch of other features didn’t because this is relatively new hardware. The port does work because if I boot into windows it works. Any assistance is much appreciated.

I’m in an Airbnb for a month, working from here. There is 400mbps internet service here but the gateway is in the basement and the wireless penetration to the main floor is terrible. I only get about 10mbps with horrendous latency and most pages/ git pushes are failing and need to be run or refreshed multiple times. Thanks for your help.

specs:
Operating System: Manjaro Linux
KDE Plasma Version: 5.27.9
KDE Frameworks Version: 5.111.0
Qt Version: 5.15.11
Kernel Version: 6.1.60-1-MANJARO (64-bit)
Graphics Platform: X11
Processors: 20 × 12th Gen Intel® Core™ i9-12900H
Memory: 31.0 GiB of RAM
Graphics Processor: NVIDIA GeForce RTX 3080 Ti Laptop GPU/PCIe/SSE2
Manufacturer: Razer
Product Name: Blade 17 (2022) - RZ09-0423
System Version: 8.04

inxi -i output:
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi
IF: wlo1 state: up mac: 50:84:92:2e:a3:1a
IP v4: 192.168.0.37/24 type: dynamic noprefixroute scope: global
IP v6: 2601:285:100:2a0:d68:4b13:ff80:34cd/64 type: dynamic noprefixroute
scope: global
IP v6: fe80::2eb5:2d68:db35:b455/64 type: noprefixroute scope: link
Device-2: Realtek RTL8125 2.5GbE driver: r8169
IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: 98:bb:1e:1f:0a:15
WAN IP: 73.153.58.132

2

Hi @badreg ,

I wonder whether you could post the entire command:
sudo inxi --admin --verbosity=7 --filter --no-host --width

with three backticks ``` before and after the output.

However, you can also post the output of the following terminal commands:

sudo dmesg | grep iwlwifi

and

sudo modprobe iwlwifi

Please, consider to read the following post:
‘Manjaro detected Intel Alder Lake-P PCH CNVi WiFi but the driver is N/A - #11 by jrichard326’

One of the comments says:
Adding ibt=off to your kernel parameters is required for >=5.18

Hope it help,

Regards

3

Not a direct response to the problem, but may be worth considering in the future:

for cases like this I have a set up a small travel router
(OpenWRT with the program/service “travelmate” installed)
This works like a WiFi extender - the router generally has better reception than a computer or Laptop and can be placed where reception is better.
It takes the original WiFi signal and creates another separate WiFi Network which you and any number of devices can connect to.

4

Thanks so much for the reply, and the link to the other post. I’ll will post the output of these commands you provided, and also check out the post. I’m not 100% sure how to adjust kernel parameters off the top of my head but I’m sure I can search that.

EDIT: I checked the post you shared, and also my previous topic, and I had the ibt issue earlier when moving to 6.1 and some kind folks helped me figure that out, so it’s currently set to off.

5

sudo inxi --admin --verbosity=7 --filter --no-host --width

  Kernel: 6.1.60-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
    root=UUID=a0bbd668-c1f7-496b-bb2b-f6fc3e5ab3ae rw acpi_backlight=vendor
    quiet apparmor=1 security=apparmor udev.log_priority=3 ibt=off
  Desktop: KDE Plasma v: 5.27.9 tk: Qt v: 5.15.11 wm: kwin_x11 dm: SDDM
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Razer product: Blade 17 (2022) - RZ09-0423 v: 8.04
    serial: <filter> Chassis: type: 10 serial: N/A
  Mobo: Razer model: DI780 v: 4 serial: N/A UEFI: Razer v: 1.07
    date: 02/16/2022
Battery:
  ID-1: BAT0 charge: 83.9 Wh (100.0%) condition: 83.9/82.1 Wh (102.2%)
    volts: 17.3 min: 15.4 model: Razer Blade type: Unknown serial: <filter>
    status: full
  ID-2: hidpp_battery_0 charge: 40% condition: N/A volts: 3.8 min: N/A
    model: Logitech G502 LIGHTSPEED Wireless Gaming Mouse type: N/A
    serial: <filter> status: discharging
Memory:
  System RAM: total: 32 GiB available: 31.04 GiB used: 10.51 GiB (33.9%)
  Array-1: capacity: 128 GiB slots: 2 modules: 2 EC: None
    max-module-size: 64 GiB note: est.
  Device-1: Controller0-ChannelA-DIMM0 type: DDR5 detail: synchronous
    size: 16 GiB speed: 4800 MT/s volts: curr: 1.1 min: 1.1 max: 1.1
    width (bits): data: 64 total: 64 manufacturer: Samsung
    part-no: M425R2GA3BB0-CQKOL serial: <filter>
  Device-2: Controller1-ChannelA-DIMM0 type: DDR5 detail: synchronous
    size: 16 GiB speed: 4800 MT/s volts: curr: 1.1 min: 1.1 max: 1.1
    width (bits): data: 64 total: 64 manufacturer: Samsung
    part-no: M425R2GA3BB0-CQKOL serial: <filter>
CPU:
  Info: model: 12th Gen Intel Core i9-12900H socket: U3E1 bits: 64
    type: MST AMCP arch: Alder Lake gen: core 12 level: v3 note: check
    built: 2021+ process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154)
    stepping: 3 microcode: 0x42C
  Topology: cpus: 1x cores: 14 mt: 6 tpc: 2 st: 8 threads: 20 smt: enabled
    cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32 KiB, 8x64 KiB
    L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB desc: 1x24 MiB
  Speed (MHz): avg: 688 high: 2736 min/max: 400/4900:5000:3800
    base/boost: 2475/5000 scaling: driver: intel_pstate governor: powersave
    volts: 1.0 V ext-clock: 100 MHz cores: 1: 614 2: 400 3: 400 4: 400 5: 400
    6: 400 7: 2736 8: 400 9: 1316 10: 400 11: 400 12: 400 13: 1661 14: 978
    15: 870 16: 400 17: 400 18: 400 19: 400 20: 400 bogomips: 116780
  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat
    arch_capabilities arch_lbr arch_perfmon art avx avx2 avx_vnni bmi1 bmi2
    bts cat_l2 cdp_l2 clflush clflushopt clwb cmov constant_tsc cpuid
    cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est
    f16c flexpriority flush_l1d fma fpu fsgsbase fsrm fxsr gfni hfi ht hwp
    hwp_act_window hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida
    intel_pt invpcid lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b
    movdiri msr mtrr nonstop_tsc nopl nx ospke pae pat pbe pclmulqdq pconfig
    pdcm pdpe1gb pebs pge pku pln pni popcnt pse pse36 pts rdpid rdrand rdseed
    rdt_a rdtscp rep_good sdbg sep serialize sha_ni smap smep smx
    split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm
    tm2 tme tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip
    vaes vme vmx vnmi vpclmulqdq vpid waitpkg x2apic xgetbv1 xsave xsavec
    xsaveopt xsaves xtopology xtpr
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GA103M [GeForce RTX 3080 Ti Mobile] vendor: Razer USA
    driver: nvidia v: 535.129.03 alternate: nouveau,nvidia_drm non-free: 545.xx+
    status: current (as of 2023-11; EOL~2026-12-xx) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-2023 pcie: gen: 4 speed: 16 GT/s
    lanes: 8 link-max: lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:2420
    class-ID: 0300
  Device-2: Logitech BRIO Ultra HD Webcam driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4:7
    chip-ID: 046d:085e class-ID: 0102 serial: <filter>
  Device-3: IMC Networks [] driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-8:9 chip-ID: 13d3:5279
    class-ID: 0e02 serial: <filter>
  Display: server: X.Org v: 21.1.9 with: Xwayland v: 23.2.2
    compositor: kwin_x11 driver: X: loaded: nvidia gpu: nvidia display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 3440x1440 s-dpi: 262 s-size: 334x140mm (13.15x5.51")
    s-diag: 362mm (14.26")
  Monitor-1: DP-4 size-res: N/A modes: N/A
  Monitor-2: DP-7 pos: primary res: 3440x1440 dpi: 109
    size: 800x340mm (31.5x13.39") diag: 869mm (34.22") modes: N/A
  API: EGL v: 1.5 hw: drv: nvidia platforms: gbm: drv: nvidia
  API: OpenGL v: 4.6.0 vendor: nvidia v: 535.129.03 glx-v: 1.4
    direct-render: yes renderer: NVIDIA GeForce RTX 3080 Ti Laptop GPU/PCIe/SSE2
    memory: 15.62 GiB
  API: Vulkan v: 1.3.269 layers: 6 device: 0 type: discrete-gpu name: NVIDIA
    GeForce RTX 3080 Ti Laptop GPU driver: nvidia v: 535.129.03
    device-ID: 10de:2420 surfaces: xcb,xlib
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Razer USA
    driver: sof-audio-pci-intel-tgl
    alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:51c8 class-ID: 0401
  Device-2: NVIDIA vendor: Razer USA driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.1
    chip-ID: 10de:2288 class-ID: 0403
  Device-3: Kingston [] driver: hid-generic,snd-usb-audio,usbhid type: USB
    rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-1.4:4 chip-ID: 0951:171d
    class-ID: 0300 serial: <filter>
  Device-4: Logitech BRIO Ultra HD Webcam driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-4:7
    chip-ID: 046d:085e class-ID: 0102 serial: <filter>
  API: ALSA v: k6.1.60-1-MANJARO status: kernel-api with: aoss
    type: oss-emulator tools: alsactl,alsamixer,amixer
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: JACK v: 1.9.22 status: off tools: N/A
  Server-3: PipeWire v: 0.3.83 status: n/a (root, process)
    with: pipewire-media-session status: active tools: pw-cli
  Server-4: PulseAudio v: 16.1 status: active (root, process)
    with: pulseaudio-alsa type: plugin tools: pacat,pactl
Network:
  Device-1: Intel Alder Lake-P PCH CNVi WiFi vendor: Rivet Networks
    driver: iwlwifi v: kernel bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: dynamic noprefixroute scope: global
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL8125 2.5GbE vendor: Razer USA driver: r8169 v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 04:00.0
    chip-ID: 10ec:8125 class-ID: 0200
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Intel [] driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 3-10:10 chip-ID: 8087:0033 class-ID: e001
  Report: rfkill ID: hci0 rfk-id: 1 state: up address: see --recommends
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 2.75 TiB used: 359.75 GiB (12.8%)
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVL21T0HCLR-00B00
    size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: GXA7601Q temp: 38.9 C
    scheme: GPT
  SMART: yes health: PASSED on: 36d 4h cycles: 648
    read-units: 12,420,093 [6.35 TB] written-units: 58,129,173 [29.7 TB]
  ID-2: /dev/nvme1n1 maj-min: 259:7 vendor: Seagate model: WDS200T1X0E-00AFY0
    size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 614900WD temp: 54.9 C
    scheme: MBR
  SMART: yes health: PASSED on: 18d 17h cycles: 590
    read-units: 737,789 [377 GB] written-units: 960,834 [491 GB]
  Message: No optical or floppy data found.
Partition:
  ID-1: / raw-size: 467.26 GiB size: 458.85 GiB (98.20%)
    used: 359.7 GiB (78.4%) fs: ext4 block-size: 4096 B dev: /dev/nvme0n1p6
    maj-min: 259:6 label: N/A uuid: a0bbd668-c1f7-496b-bb2b-f6fc3e5ab3ae
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 50.6 MiB (52.8%) fs: vfat block-size: 512 B dev: /dev/nvme0n1p2
    maj-min: 259:2 label: SYSTEM uuid: DC08-7AF9
Swap:
  Alert: No swap data was found.
Unmounted:
  ID-1: /dev/nvme0n1p1 maj-min: 259:1 size: 18.26 GiB fs: ntfs label: N/A
    uuid: 9C96A8EB96A8C6DC
  ID-2: /dev/nvme0n1p3 maj-min: 259:3 size: 16 MiB fs: N/A label: N/A
    uuid: N/A
  ID-3: /dev/nvme0n1p4 maj-min: 259:4 size: 467.26 GiB fs: ntfs
    label: Blade 17 uuid: 9ED60D98D60D71B7
  ID-4: /dev/nvme0n1p5 maj-min: 259:5 size: 1000 MiB fs: ntfs label: Winre
    uuid: A6EE0E2FEE0DF877
  ID-5: /dev/nvme1n1p1 maj-min: 259:8 size: 1.55 TiB fs: ntfs label: Aux
    uuid: F862BE0962BDCC9E
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 1 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-2: 2-0:1 info: super-speed hub ports: 3 rev: 3.1
    speed: 20 Gb/s (2.33 GiB/s) lanes: 2 mode: 3.2 gen-2x2 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-4: 3-1:2 info: Huasheng [] ports: 4 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
    chip-ID: 214b:7250 class-ID: 0900
  Device-1: 3-1.1:6 info: Kingston [] type: HID driver: hid-generic,usbhid
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 500mA chip-ID: 0951:171f class-ID: 0300
  Device-2: 3-1.4:4 info: Kingston [] type: audio,HID
    driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
    chip-ID: 0951:171d class-ID: 0300 serial: <filter>
  Device-3: 3-2:3 info: [] type: keyboard,HID,mouse
    driver: hid-generic,usbhid interfaces: 4 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 3297:1969 class-ID: 0300
  Device-4: 3-3:5 info: Logitech Lightspeed Receiver type: keyboard,mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0
    speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 98mA
    chip-ID: 046d:c539 class-ID: 0300
  Device-5: 3-4:7 info: Logitech BRIO Ultra HD Webcam type: video,audio
    driver: snd-usb-audio,uvcvideo interfaces: 5 rev: 2.1
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 500mA
    chip-ID: 046d:085e class-ID: 0102 serial: <filter>
  Device-6: 3-7:8 info: Razer USA [] type: keyboard,mouse
    driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s)
    lanes: 1 mode: 1.1 power: 500mA chip-ID: 1532:028b class-ID: 0300
  Device-7: 3-8:9 info: IMC Networks [] type: video driver: uvcvideo
    interfaces: 4 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0
    power: 500mA chip-ID: 13d3:5279 class-ID: 0e02 serial: <filter>
  Device-8: 3-10:10 info: Intel [] type: bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1
    power: 100mA chip-ID: 8087:0033 class-ID: e001
  Hub-5: 4-0:1 info: super-speed hub ports: 4 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-6: 5-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-7: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-8: 7-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
    class-ID: 0900
  Hub-9: 8-0:1 info: super-speed hub ports: 2 rev: 3.1
    speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 76.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 427 Uptime: 3h 33m wakeups: 0 Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: 1967 pm: pacman pkgs: 1930 libs: 535 tools: pamac,yay pm: appimage
  pkgs: 0 pm: flatpak pkgs: 6 pm: snap pkgs: 31 Shell: Sudo (sudo) v: 1.9.14p3
  default: Bash v: 5.2.15 running-in: yakuake inxi: 3.3.31```

sudo dmesg | grep iwlwifi

[    3.286126] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
[    3.286145] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.36
[    3.286490] iwlwifi 0000:00:14.3: loaded firmware version 72.a764baac.0 so-a0-gf4-a0-72.ucode op_mode iwlmvm
[    3.556945] iwlwifi 0000:00:14.3: Detected Killer(R) Wi-Fi 6E AX1690i 160MHz Wireless Network Adapter (411NGW), REV=0x370
[    3.732286] iwlwifi 0000:00:14.3: loaded PNVM version 181407b3
[    3.747835] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x3010d000
[    3.813364] iwlwifi 0000:00:14.3: base HW address: 50:84:92:2e:a3:1a
[    3.830587] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[ 2919.657004]  snd_pcm_dmaengine irqbypass crct10dif_pclmul snd_hda_intel crc32_pclmul mac80211 polyval_clmulni snd_intel_dspcfg pmt_telemetry snd_intel_sdw_acpi dcdbas polyval_generic iTCO_wdt gf128mul intel_pmc_bxt mei_hdcp mei_pxp hid_multitouch iTCO_vendor_support pmt_class dell_wmi_descriptor intel_rapl_msr wmi_bmof nvidia_wmi_ec_backlight libarc4 snd_hda_codec ghash_clmulni_intel sha512_ssse3 snd_hda_core aesni_intel processor_thermal_device_pci vfat crypto_simd snd_hwdep processor_thermal_device r8169 fat cryptd iwlwifi snd_pcm nvidia(POE) realtek processor_thermal_rfim rapl intel_cstate intel_uncore pcspkr spi_nor mdio_devres snd_timer mei_me processor_thermal_mbox snd i2c_i801 intel_lpss_pci cfg80211 mtd processor_thermal_rapl i2c_smbus intel_lpss int3400_thermal intel_hid thunderbolt i2c_hid_acpi libphy idma64 mei soundcore video intel_vsec igen6_edac int3403_thermal intel_rapl_common rfkill i2c_hid acpi_thermal_rel int340x_thermal_zone wmi acpi_pad sparse_keymap acpi_tad
[12088.228659] iwlwifi 0000:00:14.3: reached 20 old SN frames from 34:98:b5:c9:f2:c4 on queue 14, stopping BA session on TID 0
[12356.530028] iwlwifi 0000:00:14.3: reached 20 old SN frames from 34:98:b5:c9:f2:c4 on queue 14, stopping BA session on TID 0
[12484.391893] iwlwifi 0000:00:14.3: reached 20 old SN frames from 34:98:b5:c9:f2:c4 on queue 13, stopping BA session on TID 0
[12492.375117] iwlwifi 0000:00:14.3: reached 20 old SN frames from 34:98:b5:c9:f2:c4 on queue 1, stopping BA session on TID 0

sudo modprobe iwlwifi => this command yields no output

6

Thanks for the heads up, I’ve been considering something like this since this problem came up, really hasn’t been an issue before but now I will definitely get something like this set up and have it on hand

7

I’m wondering if any of these console outputs help? I’m out of ports here and hoping at least someone has a solution, thanks for your help!

8

Hi @badreg ,
The outputs you provided are correct, you have both connections up.

I could suggest you to read this posts, in order to solve your problem.
‘Slow wifi using Manjaro with Intel Alder Lake-P PCH CNVi WiFi’

‘Exceptionally slow WiFi despite good signal on fresh install - #2 by NGr’

Hope it help,
Regards