Could not Initialize GLX

Howdy,
Its my first post here. I have searched for answers to this. Here and in the Arch forums. I found a similar issue from an Arch user, and it appeared to be Graphics issues (this user had Nvidia drivers installed) I don't appear to have Nvidia drivers. I do think I'm looking at a graphics issue here.
Brand new installation; The only changes I've made are in troubleshooting this. Any help would be great.

The error I get when I try to run the Eve launcher is first; followed by system configuration data which I see regularly requested on these forums. I'd be happy to provide more info should anyone need it to help me.

[glen@freedomLAP evelauncher]$ sh ./evelauncher.sh
QObject::startTimer: Timers can only be used with threads started with QThread
Could not initialize GLX
./evelauncher.sh: line 14: 16827 Aborted                 (core dumped) "$dirname/$appname" "$@"

My System's setup:

inxi -Fxz
System:
  Host: freedomLAP Kernel: 5.4.6-2-MANJARO x86_64 bits: 64 compiler: gcc 
  v: 9.2.0 Desktop: KDE Plasma 5.17.4 Distro: Manjaro Linux 
Machine:
  Type: Laptop System: TOSHIBA product: Satellite P55W-C v: PSPVTU-008001 
  serial: <filter> 
  Mobo: FF40 model: 0693 v: 2.0 serial: <filter> UEFI: INSYDE v: 1.20 
  date: 10/07/2015 
Battery:
  ID-1: BAT0 charge: 37.0 Wh condition: 37.0/45.5 Wh (81%) 
  model: TKBSS G71C000JW110 status: Unknown 
CPU:
  Topology: Dual Core model: Intel Core i7-6500U bits: 64 type: MT MCP 
  arch: Skylake rev: 3 L2 cache: 4096 KiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 20810 
  Speed: 800 MHz min/max: 400/3100 MHz Core speeds (MHz): 1: 800 2: 800 
  3: 800 4: 800 
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Toshiba 
  driver: i915 v: kernel bus ID: 00:02.0 
  Display: x11 server: X.Org 1.20.6 driver: intel unloaded: modesetting 
  resolution: 2560x1440~60Hz 
  OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2) 
  v: 4.6 Mesa 19.3.1 direct render: Yes 
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Toshiba 
  driver: snd_hda_intel v: kernel bus ID: 00:1f.3 
  Sound Server: ALSA v: k5.4.6-2-MANJARO 
Network:
  Device-1: Intel Wireless 7265 driver: iwlwifi v: kernel port: 3040 
  bus ID: 01:00.0 
  IF: wlp1s0 state: up mac: <filter> 
Drives:
  Local Storage: total: 894.25 GiB used: 64.92 GiB (7.3%) 
  ID-1: /dev/sda vendor: SanDisk model: Ultra II 960GB size: 894.25 GiB 
Partition:
  ID-1: / size: 671.86 GiB used: 64.92 GiB (9.7%) fs: ext4 dev: /dev/sda1 
  ID-2: swap-1 size: 14.65 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda3 
Sensors:
  System Temperatures: cpu: 48.0 C mobo: N/A 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 188 Uptime: 2d 54m Memory: 11.56 GiB used: 2.11 GiB (18.2%) 
  Init: systemd Compilers: gcc: 9.2.0 clang: 9.0.0 Shell: bash v: 5.0.11 
  inxi: 3.0.37

lspci:

lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

---Glen

This is a Windows game and looking here gives me the impression that this is unofficial and/or just a wine wrapper. After finding this game on Lutris reveals that it is a Steam game, so just install it from Steam instead and see if it launches. Make sure you enable Steam Play for unsupported titles in the Steam settings.

1 Like

Hi,

Thanks for replying. I'll try to run it on steam. Even steam has issues though - there are things which are not displaying correctly on steam. I'm thinking the issue is going to persist. I'll update after attempting your solution. Thanks.

1 Like

No problem and take your time!

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by