CD drive opens opon wakeup

Not sure where to post this, so move if needed. I recently replaced the power supply in my machine. Since then, whenever I wake up from suspend, the cd drive is poled first and then, after the os has started to come back up, the drive opens. In the BIOS the cd drive is disabled as a boot device and does not do anything when the computer is booted. before the power supply was replaced, this did not happen. Haven’t been able to find a solution, hopefully someone here can help. OS is Manjaro Cinnamon on a desktop pc.

After a recent large update my CDROM tray ejects when resuming from suspend. Would appreciate help determining what is causing that.

:+1: Welcome to Manjaro! :+1:

  1. Please read this:
    How to provide good information
    and post some more information so we can see what’s really going on. Now we know the symptom of the disease, but we need some more probing to know where the origin lies… :grin:

  2. An inxi --admin --verbosity=7 --filter --no-host --width would be the minimum required information for us to be able to help you. (Personally Identifiable Information like serial numbers and MAC addresses will be filtered out by the above command)
    Also, please copy-paste that output in-between 3 backticks ``` at the beginning and end of the code/text.

  3. The output of:

    journalctl --system --boot=0 --priority=3 | tail --lines=50
    

    ASAP after it comes back from resume, would be helpful as well.

:+1:

P.S. If you enter a bit more details in your profile, we can also see which Desktop Environment you’re using, which CPU/GPU or Kernel, … you have without typing it every time

System:
  Kernel: 5.10.49-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10-x86_64 
  root=UUID=7d4b09c8-83e8-4ec2-b097-a2386696c288 rw quiet apparmor=1 
  security=apparmor udev.log_priority=3 
  Desktop: Cinnamon 5.0.4 tk: GTK 3.24.30 vt: 7 dm: LightDM 1.30.0 
  Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Desktop Mobo: ASUSTeK model: M5A97 R2.0 v: Rev 1.xx serial: <filter> 
  BIOS: American Megatrends v: 2603 date: 06/26/2015 
Battery:
  Message: No system battery data found. Is one present? 
Memory:
  RAM: total: 15.53 GiB used: 1.45 GiB (9.3%) 
  RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
CPU:
  Info: 8-Core model: AMD FX-8350 bits: 64 type: MCP arch: Bulldozer 
  family: 15 (21) model-id: 2 stepping: 0 microcode: 6000852 cache: L2: 2 MiB 
  bogomips: 64241 
  Speed: 1404 MHz min/max: 1400/4000 MHz boost: enabled Core speeds (MHz): 
  1: 1404 2: 1403 3: 1404 4: 1401 5: 1404 6: 1400 7: 1402 8: 1400 
  Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov 
  cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists 
  extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht hw_pstate 
  ibpb ibs lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor msr mtrr 
  nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat pausefilter 
  pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni popcnt pse 
  pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 svm 
  svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean vme vmmcall wdt 
  xop xsave 
  Vulnerabilities: Type: itlb_multihit status: Not affected 
  Type: l1tf status: Not affected 
  Type: mds status: Not affected 
  Type: meltdown status: Not affected 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP: 
  disabled, RSB filling 
  Type: srbds status: Not affected 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: NVIDIA GK104 [GeForce GTX 670] vendor: eVga.com. driver: nvidia 
  v: 470.42.01 alternate: nouveau,nvidia_drm bus-ID: 01:00.0 
  chip-ID: 10de:1189 class-ID: 0300 
  Display: x11 server: X.Org 1.20.11 driver: loaded: nvidia display-ID: :0 
  screens: 1 
  Screen-1: 0 s-res: 2960x1050 s-dpi: 96 s-size: 783x278mm (30.8x10.9") 
  s-diag: 831mm (32.7") 
  Monitor-1: DVI-I-1 res: 1680x1050 hz: 60 dpi: 90 
  size: 474x296mm (18.7x11.7") diag: 559mm (22") 
  Monitor-2: DVI-D-0 res: 1280x1024 hz: 60 dpi: 96 
  size: 338x270mm (13.3x10.6") diag: 433mm (17") 
  OpenGL: renderer: NVIDIA GeForce GTX 670/PCIe/SSE2 v: 4.6.0 NVIDIA 470.42.01 
  direct render: Yes 
Audio:
  Device-1: NVIDIA GK104 HDMI Audio vendor: eVga.com. driver: snd_hda_intel 
  v: kernel bus-ID: 01:00.1 chip-ID: 10de:0e0a class-ID: 0403 
  Device-2: C-Media CMI8788 [Oxygen HD Audio] vendor: ASUSTeK CMI8786 
  driver: snd_oxygen v: kernel bus-ID: 05:05.0 chip-ID: 13f6:8788 
  class-ID: 0401 
  Sound Server-1: ALSA v: k5.10.49-1-MANJARO running: yes 
  Sound Server-2: JACK v: 0.125.0 running: no 
  Sound Server-3: PulseAudio v: 14.2 running: yes 
  Sound Server-4: PipeWire v: 0.3.31 running: no 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: ASUSTeK P8 series driver: r8168 v: 8.049.02-NAPI modules: r8169 
  port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  IP v4: <filter> type: dynamic noprefixroute scope: global 
  broadcast: <filter> 
  IP v6: <filter> type: dynamic noprefixroute scope: global 
  IP v6: <filter> type: dynamic noprefixroute scope: global 
  IP v6: <filter> type: noprefixroute scope: link 
  WAN IP: <filter> 
Bluetooth:
  Message: No bluetooth data found. 
Logical:
  Permissions: Unable to run lvs. Root privileges required. 
RAID:
  Message: No RAID data found. 
Drives:
  Local Storage: total: 1.36 TiB used: 154.09 GiB (11.0%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 500GB 
  size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s 
  rotation: SSD serial: <filter> rev: 2B6Q scheme: MBR 
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital 
  model: WD1003FZEX-00K3CA0 size: 931.51 GiB block-size: physical: 4096 B 
  logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: 1A01 
  scheme: MBR 
  Optical-1: /dev/sr0 vendor: ASUS model: DRW-24B1ST j rev: 1.00 
  dev-links: cdrom 
  Features: speed: 48 multisession: yes audio: yes dvd: yes 
  rw: cd-r,cd-rw,dvd-r,dvd-ram state: running 
Partition:
  ID-1: / raw-size: 465.76 GiB size: 457.45 GiB (98.22%) 
  used: 154.09 GiB (33.7%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A 
  uuid: 7d4b09c8-83e8-4ec2-b097-a2386696c288 
Swap:
  Kernel: swappiness: 1 (default 60) cache-pressure: 100 (default) 
  ID-1: swap-1 type: file size: 512 MiB used: 0 KiB (0.0%) priority: -2 
  file: /swapfile 
Unmounted:
  ID-1: /dev/sdb1 maj-min: 8:17 size: 931.51 GiB fs: <superuser required> 
  label: N/A uuid: 6d3612e4-c744-44f3-9bca-9b5129348b4e 
USB:
  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 5 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 speed: 12 Mb/s 
  chip-ID: 1d6b:0001 class-ID: 0900 
  Device-1: 4-3:2 info: Logitech Advanced Corded Mouse M500s type: Mouse,HID 
  driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s 
  power: 300mA chip-ID: 046d:c093 class-ID: 0300 serial: <filter> 
  Device-2: 4-5:3 info: Holtek USB Gaming Keyboard type: Keyboard,HID 
  driver: hid-generic,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s 
  power: 350mA chip-ID: 04d9:a0d1 class-ID: 0300 
  Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 5 rev: 1.1 speed: 12 Mb/s 
  chip-ID: 1d6b:0001 class-ID: 0900 
  Hub-6: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s 
  chip-ID: 1d6b:0001 class-ID: 0900 
  Hub-7: 7-0:1 info: Full speed (or root) Hub ports: 4 rev: 1.1 speed: 12 Mb/s 
  chip-ID: 1d6b:0001 class-ID: 0900 
  Hub-8: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-9: 9-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 speed: 5 Gb/s 
  chip-ID: 1d6b:0003 class-ID: 0900 
  Hub-10: 10-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 
  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 
  Hub-11: 11-0:1 info: Full speed (or root) Hub ports: 2 rev: 3.0 
  speed: 5 Gb/s chip-ID: 1d6b:0003 class-ID: 0900 
Sensors:
  System Temperatures: cpu: 27.0 C mobo: 27.0 C gpu: nvidia temp: 37 C 
  Fan Speeds (RPM): cpu: 1099 fan-2: 2177 fan-3: 0 gpu: nvidia fan: 50% 
  Power: 12v: N/A 5v: N/A 3.3v: 3.31 vbat: 3.29 
Info:
  Processes: 239 Uptime: 3m wakeups: 0 Init: systemd v: 248 tool: systemctl 
  Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1371 lib: 406 
  flatpak: 0 Shell: Bash v: 5.1.8 running-in: gnome-terminal inxi: 3.3.05 

on the second command, all I get is “unable to locate daemon control file”.

Your inxi output looks fine, so I definitely need the output of this:

Have you tried with sudo yet?

:scream:

same answer with sudo.

Maybe @MrBruce can provide the output to:

journalctl --system --boot=0 --priority=3 | tail --lines=50

:question:

Thanks for getting me started. Please see pastbin URL: https://pastebin.com/2LJtnACM

After a recent large update my CDROM tray ejects when resuming from suspend. Would appreciate help determining what is causing that.

Mine is doing the same thing. Tray ejects upon resume.

1 Like

Having the same problem. Posted problem in “Latest Stable Update” forum area. Had no useful response or solution given. Using XFCE. Thinking of just unplugging the CD-ROM since I hardly ever use it. Would like to find a solution though.

Hello there

Could you try this workaround to the problem? CD/DVD DRIVE Opening Automatically Several Times / Newbie Corner / Arch Linux Forums

1 Like

That workaround solves the problem. The post mentioned the eject button would no longer work, but it does indeed still work, as well as the eject command line program and K3b.

Workaround worked for me as well, thanks very much for the help.

Fabby, my profile is updated. Didn’t realize my old hardware was still there. Thank you as well.