Trying to read data from an SD card, the card is recognised and mounts correctly but I’m unable to see .wav files that have been saved in a folder on the card. The folder is visible, as are some small .txt files, just not the .wav files. The files are visible when viewed on a Windows laptop.
I’ve tried using different card readers, file managers (Thunar and Files), rebooting with different kernels etc., no joy. This haven’t always been a problem - it used to work fine. Please help!
$ inxi --full --admin --filter --width
System:
Kernel: 6.1.62-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1-x86_64
root=UUID=8643e13d-67fa-4e6a-a82c-e45ef5ea0cb9 rw apparmor=1
security=apparmor udev.log_priority=3
bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash
snd_hda_intel.dmic_detect=0
Desktop: GNOME v: 45.1 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM v: 45.0.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Convertible System: HP product: HP Spectre x360 Convertible 13-ap0xxx
v: N/A serial: <superuser required> Chassis: type: 31
serial: <superuser required>
Mobo: HP model: 8514 v: 09.68 serial: <superuser required> UEFI: AMI
v: F.34 date: 10/08/2019
Battery:
ID-1: BAT0 charge: 48.8 Wh (93.5%) condition: 52.2/52.2 Wh (100.0%)
volts: 16.8 min: 15.4 model: HP Primary type: Li-ion serial: N/A
status: not charging
Device-1: hid-0018:04F3:2810.0001-battery model: ELAN2514:00 04F3:2810
serial: N/A charge: N/A status: N/A
CPU:
Info: model: Intel Core i7-8565U bits: 64 type: MT MCP arch: Whiskey Lake
gen: core 8 level: v3 note: check built: 2018 process: Intel 14nm family: 6
model-id: 0x8E (142) stepping: 0xB (11) microcode: 0xF4
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 400 min/max: 400/4600 scaling: driver: intel_pstate
governor: performance cores: 1: 400 2: 400 3: 400 4: 400 5: 400 6: 400 7: 400
8: 400 bogomips: 32012
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:3ea0
class-ID: 0300
Device-2: Quanta HP Wide Vision FHD Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:2 chip-ID: 0408:5251
class-ID: 0e02 serial: <filter>
Display: x11 server: X.org v: 1.21.1.9 with: Xwayland v: 23.2.2
compositor: gnome-shell driver: X: loaded: modesetting alternate: fbdev,vesa
dri: iris gpu: i915 display-ID: :1 screens: 1
Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
Monitor-1: eDP-1 model: AU Optronics 0x272b built: 2018 res: 1920x1080
hz: 60 dpi: 166 gamma: 1.2 size: 293x165mm (11.54x6.5") diag: 336mm (13.2")
ratio: 16:9 modes: 3840x2160
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
Device-1: Intel Cannon Point-LP High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 00:1f.3 chip-ID: 8086:9dc8 class-ID: 0401
API: ALSA v: k6.1.62-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: N/A
Server-2: PipeWire v: 0.3.84 status: off with: pipewire-media-session
status: active tools: pw-cli
Server-3: PulseAudio v: 16.1 status: active with: 1: pulseaudio-alsa
type: plugin 2: pulseaudio-jack type: module tools: pacat,pactl,pavucontrol
Network:
Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:9df0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
IF-ID-1: docker0 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) driver: btusb v: 0.8
type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10:5
chip-ID: 8087:0aaa class-ID: e001
Report: rfkill ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Drives:
Local Storage: total: 2.07 TiB used: 1.64 TiB (79.0%)
ID-1: /dev/mmcblk0 maj-min: 179:0 model: SC256 size: 238.3 GiB block-size:
physical: 512 B logical: 512 B tech: SSD serial: <filter> scheme: MBR
SMART Message: Unknown smartctl error. Unable to generate data.
SMART Message: Unable to run smartctl. Root privileges required.
ID-2: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba model: N/A
size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: AAHA4102 temp: 34.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: PSSD T7 size: 931.51 GiB
block-size: physical: 512 B logical: 512 B type: USB rev: 3.2 spd: 10 Gb/s
lanes: 1 mode: 3.2 gen-2x1 tech: SSD serial: <filter> scheme: MBR
Partition:
ID-1: / raw-size: 953.57 GiB size: 937.53 GiB (98.32%)
used: 880.62 GiB (93.9%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 280 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: file size: 20 GiB used: 8.2 MiB (0.0%) priority: -2
file: /swapfile
Sensors:
System Temperatures: cpu: 72.0 C pch: 59.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 294 Uptime: 1h 11m wakeups: 0 Memory: total: 16 GiB note: est.
available: 15.28 GiB used: 4.76 GiB (31.2%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 alt: 6
clang: 16.0.6 Packages: 2546 pm: dpkg pkgs: 0 pm: pacman pkgs: 2533 libs: 565
tools: pamac,yay pm: rpm pkgs: 0 pm: flatpak pkgs: 0 pm: snap pkgs: 13
Shell: Bash v: 5.2.15 running-in: gnome-terminal inxi: 3.3.31