Cant install wifi adapter drivers

So i installed manjaro today and at first i had no problem connecting to my wifi network but then i restarted the pc after installing some updates and i couldn't connect to my wifi again, its not detecting anything either, my adapter is a TL-WN350GD, im quite new to linux in general so i dont know where to get the drivers

Please post:
inxi -Fxxxz
from terminal, copy that text and paste it here. Use ``` above and scream it.

           v: 9.1.0 Desktop: KDE Plasma 5.16.2 tk: Qt 5.13.0 wm: kwin_x11 dm: SDDM 
           Distro: Manjaro Linux 
Machine:   Type: Desktop Mobo: ASUSTeK model: M5A97 EVO R2.0 v: Rev 1.xx serial: <filter> 
           UEFI: American Megatrends v: 2401 date: 03/18/2014 
CPU:       Topology: 6-Core model: AMD FX-6300 bits: 64 type: MCP arch: Bulldozer 
           L2 cache: 2048 KiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
           bogomips: 42157 
           Speed: 1404 MHz min/max: 1400/3500 MHz boost: enabled Core speeds (MHz): 
           1: 1404 2: 1401 3: 1501 4: 1514 5: 1404 6: 1405 
Graphics:  Device-1: AMD Tonga PRO [Radeon R9 285/380] vendor: ASUSTeK driver: amdgpu 
           v: kernel bus ID: 01:00.0 chip ID: 1002:6939 
           Display: x11 server: X.Org 1.20.5 driver: amdgpu FAILED: ati 
           unloaded: modesetting,radeon alternate: fbdev,vesa compositor: kwin_x11 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: AMD Radeon R9 380 Series (TONGA DRM 3.27.0 4.19.56-1-MANJARO 
           LLVM 8.0.0) 
           v: 4.5 Mesa 19.1.1 direct render: Yes 
Audio:     Device-1: AMD SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel 
           bus ID: 00:14.2 chip ID: 1002:4383 
           Device-2: AMD Tonga HDMI Audio [Radeon R9 285/380] vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 1002:aad8 
           Sound Server: ALSA v: k4.19.56-1-MANJARO 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: ASUSTeK P8 series driver: r8168 v: 8.047.01-NAPI port: d000 
           bus ID: 02:00.0 chip ID: 10ec:8168 
           IF: enp2s0 state: down mac: <filter> 
           Device-2: Qualcomm Atheros driver: N/A port: c000 bus ID: 06:05.0 
           chip ID: 168c:ff1a 
           IF-ID-1: enp5s0u1 state: unknown speed: N/A duplex: N/A mac: <filter> 
Drives:    Local Storage: total: 935.24 GiB used: 10.13 GiB (1.1%) 
           ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-75ZF5A0 size: 931.51 GiB 
           speed: 6.0 Gb/s serial: <filter> rev: 0A80 scheme: GPT 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: Cruzer Blade size: 3.73 GiB 
           serial: <filter> rev: 1.26 scheme: MBR 
Partition: ID-1: / size: 915.60 GiB used: 10.13 GiB (1.1%) fs: ext4 dev: /dev/sda2 
Sensors:   System Temperatures: cpu: 38.4 C mobo: N/A gpu: amdgpu temp: 62 C 
           Fan Speeds (RPM): cpu: 0 gpu: amdgpu fan: 1052 
Info:      Processes: 213 Uptime: 2h 18m Memory: 7.69 GiB used: 1.97 GiB (25.6%) 
           Init: systemd v: 242 Compilers: gcc: 9.1.0 Shell: bash v: 5.0.7 
           running in: konsole inxi: 3.0.34 ```

I think tbg will eventually come here and help you fully..Here is what I found
So the chipset of this wifi card is Atheros AR5007G.Was included in kernel since v 2.5 and supported by ath5k kernel module

Please execute sudo modprobe ath5k in terminal and check connection

Hi @masterfix.

Sorry I edited out my prior post info. I was going by the mobo model, as the adapter ID did not show up in the output from inxi. Your info could be completely correct, as we don't know the revision number of the adapter.

I got the info from here.Is it outdated? (

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.

Forum kindly sponsored by