I have just installed Manjaro XFCE on my desktop with the non-free drivers for my NVIDIA graphics card. I have not been able to log into the desktop as every time I attempt to login I get sent back to the login window.
I have attached the system info in the hidden section. I have attempted the steps as shown in other Manjaro forums.
I am able to access tty and ssh so I can access and use the terminal however still can’t seem to load into the desktop.
System Info
inxi -Fazy --no-host
System:
Kernel: 5.8.6-1-MANJARO x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.8-x86_64
root=UUID=1f1a51b1-4d44-466b-8c4a-29339a6c3fdd rw quiet apparmor=1
security=apparmor resume=UUID=d2a31c1e-3308-4bb1-8e34-912dad457424
udev.log_priority=3
Console: tty 0 DM: LightDM 1.30.0 Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: CROSSHAIR VI HERO v: Rev 1.xx
serial: <filter> UEFI: American Megatrends v: 7901 date: 07/31/2020
Battery:
ID-1: hidpp_battery_0 charge: N/A condition: N/A volts: 4.1/N/A
model: Logitech G502 LIGHTSPEED Wireless Gaming Mouse type: N/A
serial: <filter> status: Unknown
Device-1: sony_controller_battery_90:89:5f:a7:8c:55 model: N/A serial: N/A
charge: N/A status: Charging
CPU:
Topology: 8-Core model: AMD Ryzen 7 1800X bits: 64 type: MT MCP arch: Zen
family: 17 (23) model-id: 1 stepping: 1 microcode: 8001138
L2 cache: 4096 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 115019
Speed: 3696 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz):
1: 3691 2: 2121 3: 2112 4: 2104 5: 2186 6: 2194 7: 2192 8: 2190 9: 2121
10: 2110 11: 2194 12: 2206 13: 2200 14: 2196 15: 3693 16: 2105
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GP102 [GeForce GTX 1080 Ti] driver: nvidia v: 450.66
alternate: nouveau,nvidia_drm bus ID: 0b:00.0 chip ID: 10de:1b06
Display: server: X.org 1.20.8 driver: nvidia tty: 190x49
Message: Advanced graphics data unavailable in console. Try -G --display
Audio:
Device-1: NVIDIA GP102 HDMI Audio driver: snd_hda_intel v: kernel
bus ID: 0b:00.1 chip ID: 10de:10ef
Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel bus ID: 0d:00.3 chip ID: 1022:1457
Device-3: Logitech HD Pro Webcam C920 type: USB
driver: snd-usb-audio,uvcvideo bus ID: 1-13.1:6 chip ID: 046d:082d
serial: <filter>
Device-4: Sony DualShock 4 [CUH-ZCT2x] type: USB
driver: snd-usb-audio,sony,usbhid bus ID: 1-5:2 chip ID: 054c:09cc
Sound Server: ALSA v: k5.8.6-1-MANJARO
Network:
Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: 5.6.0-k
port: e000 bus ID: 05:00.0 chip ID: 8086:1539
IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Broadcom and subsidiaries BCM4352 802.11ac Wireless Network Adapter vendor: ASUSTeK driver: wl v: kernel modules: bcma port: e000
bus ID: 0a:00.0 chip ID: 14e4:43b1
IF: wlp10s0 state: dormant mac: <filter>
Drives:
Local Storage: total: 2.52 TiB used: 64.63 GiB (2.5%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 960 EVO 500GB size: 465.76 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4
serial: <filter> rev: 3B7QCXE7 scheme: GPT
ID-2: /dev/sda vendor: Seagate model: ST2000DM001-1CH164 size: 1.82 TiB
block size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
rotation: 7200 rpm serial: <filter> rev: CC24 scheme: GPT
ID-3: /dev/sdb vendor: SanDisk model: SDSSDA240G size: 223.57 GiB
block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter>
rev: 00RL scheme: GPT
ID-4: /dev/sdc type: USB vendor: Toshiba model: TOSHIBA USB DRV
size: 28.93 GiB block size: physical: 512 B logical: 512 B serial: <filter>
rev: PMAP scheme: MBR
Partition:
ID-1: / raw size: 401.47 GiB size: 394.16 GiB (98.18%) used: 7.39 GiB (1.9%)
fs: ext4 dev: /dev/nvme0n1p2
ID-2: /home raw size: 1.82 TiB size: 1.79 TiB (98.38%)
used: 57.24 GiB (3.1%) fs: ext4 dev: /dev/sda1
Swap:
Kernel: swappiness: 60 (default) cache pressure: 100 (default)
ID-1: swap-1 type: partition size: 64.00 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p1
Sensors:
System Temperatures: cpu: 20.5 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 277 Uptime: 51m Memory: 31.35 GiB used: 531.6 MiB (1.7%)
Init: systemd v: 246 Compilers: gcc: N/A Packages: pacman: 1076 lib: 333
flatpak: 0 Shell: Bash v: 5.0.18 running in: tty 0 (SSH) inxi: 3.1.05
mhwd -li
mhwd -li
> Installed PCI configs:
--------------------------------------------------------------------------------
NAME VERSION FREEDRIVER TYPE
--------------------------------------------------------------------------------
video-nvidia-450xx 2019.10.25 false PCI
network-broadcom-wl 2018.10.07 true PCI
Warning: No installed USB configs!
LightDM Status
systemctl status lightdm
● lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; vendor preset: disabled)
Active: active (running) since Sat 2020-09-12 09:14:01 AEST; 1h 8min ago
Docs: man:lightdm(1)
Main PID: 781 (lightdm)
Tasks: 5 (limit: 38425)
Memory: 55.2M
CGroup: /system.slice/lightdm.service
├─ 781 /usr/bin/lightdm
├─1483 /usr/lib/Xorg :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
└─1501 lightdm --session-child 12 19
Sep 12 09:14:00 arctic systemd[1]: Starting Light Display Manager...
Sep 12 09:14:01 arctic systemd[1]: Started Light Display Manager.
Sep 12 09:14:03 arctic lightdm[1260]: pam_unix(lightdm-greeter:session): session opened for user lightdm(uid=969) by (uid=0)
Sep 12 09:14:13 arctic lightdm[1305]: gkr-pam: unable to locate daemon control file
Sep 12 09:14:13 arctic lightdm[1305]: gkr-pam: stashed password to try later in open session
Sep 12 09:14:13 arctic lightdm[1305]: pam_systemd_home(lightdm:account): systemd-homed is not available: Unit dbus-org.freedesktop.home1.service not found.
Sep 12 09:14:13 arctic lightdm[1305]: pam_unix(lightdm:session): session opened for user arctic(uid=1000) by (uid=0)
Sep 12 09:14:13 arctic lightdm[1305]: gkr-pam: gnome-keyring-daemon started properly and unlocked keyring
Sep 12 09:14:14 arctic lightdm[1305]: pam_unix(lightdm:session): session closed for user arctic
Sep 12 09:14:16 arctic lightdm[1490]: pam_unix(lightdm-greeter:session): session opened for user lightdm(uid=969) by (uid=0)