Cannot boot into manjaro after fresh installation on SSD

Hi!
Check the bios boot order and change it to the sdd

After I install grub from live boot. I set manjaro at the top on the boot order. Restart the system same issue cannot boot no grub.
Also its weird if I again boot through USB the entry in efibootmgr for the manjaro gets lost.

After I install grub from live boot. I set manjaro at the top on the boot order. Restart the system same issue cannot boot no grub.
Also its weird if I again boot through USB the entry in efibootmgr for the manjaro gets lost.

boot wit USB iso manjaro ( live)
open a terminal and a browser on this topic

inxi -Fza 
sudo parted -l
sudo efibootmgr -v
test -d /sys/firmware/efi && echo efi || echo bios

inxi -Fza :
stem: Kernel: 5.8.6-1-MANJARO x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC driver=free nouveau.modeset=1
i915.modeset=1 radeon.modeset=1 misobasedir=manjaro misolabel=MANJARO_XFCE_201 quiet systemd.show_status=1
apparmor=1 security=apparmor
Desktop: Xfce 4.14.2 tk: Gtk 3.24.20 info: xfce4-panel wm: xfwm4 dm: LightDM 1.30.0 Distro: Manjaro Linux
Machine: Type: Laptop System: LENOVO product: 80EW v: Lenovo B50-80 serial: Chassis: type: 10 v: Lenovo B50-80
serial:
Mobo: LENOVO model: Lenovo B50-80 v: No DPK serial: UEFI: LENOVO v: A8CN30WW(V1.03) date: 01/08/2015
Battery: ID-1: BAT1 charge: 22.5 Wh condition: 22.5/31.7 Wh (71%) volts: 16.3/14.4 model: COMPAL PABAS0241231 type: Li-ion
serial: status: Full
CPU: Topology: Dual Core model: Intel Core i5-5200U bits: 64 type: MT MCP arch: Broadwell family: 6 model-id: 3D (61)
stepping: 4 microcode: 2F L2 cache: 3072 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 17565
Speed: 798 MHz min/max: 500/2700 MHz Core speeds (MHz): 1: 798 2: 799 3: 798 4: 798
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel HD Graphics 5500 vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:1616
Device-2: Advanced Micro Devices [AMD/ATI] Sun LE [Radeon HD 8550M / R5 M230] vendor: Lenovo driver: radeon
v: kernel alternate: amdgpu bus ID: 0a:00.0 chip ID: 1002:666f
Device-3: IMC Networks Lenovo EasyCamera type: USB driver: uvcvideo bus ID: 1-6:3 chip ID: 13d3:5727
serial:
Display: x11 server: X.Org 1.20.8 driver: ati,intel,radeon unloaded: modesetting alternate: fbdev,vesa
display ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") s-diag: 414mm (16.3")
Monitor-1: eDP1 res: 1366x768 hz: 60 dpi: 102 size: 340x190mm (13.4x7.5") diag: 389mm (15.3")
OpenGL: renderer: Mesa Intel HD Graphics 5500 (BDW GT2) v: 4.6 Mesa 20.1.7 direct render: Yes
Audio: Device-1: Intel Broadwell-U Audio vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:03.0 chip ID: 8086:160c
Device-2: Intel Wildcat Point-LP High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
bus ID: 00:1b.0 chip ID: 8086:9ca0
Sound Server: ALSA v: k5.8.6-1-MANJARO
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8169 v: kernel port: 4000
bus ID: 08:00.0 chip ID: 10ec:8168
IF: enp8s0 state: down mac:
Device-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter vendor: Lenovo driver: ath9k v: kernel
port: 4000 bus ID: 09:00.0 chip ID: 168c:0036
IF: wlp9s0 state: up mac:
Device-3: Qualcomm Atheros AR3012 Bluetooth 4.0 type: USB driver: btusb bus ID: 1-7:5 chip ID: 0cf3:3004
Drives: Local Storage: total: 1.17 TiB used: 126.4 MiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda vendor: Seagate model: ST1000LM024 HN-M101MBB size: 931.51 GiB block size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: rev: 0001 scheme: GPT
ID-2: /dev/sdb vendor: A-Data model: SU800 size: 238.47 GiB block size: physical: 512 B logical: 512 B
speed: 3.0 Gb/s serial: rev: 7ANR scheme: GPT
ID-3: /dev/sdc type: USB model: SMI USB size: 29.30 GiB block size: physical: 512 B logical: 512 B serial:
rev: 1100 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw size: N/A size: 5.77 GiB used: 126.4 MiB (2.1%) fs: overlay source: ERR-102
Swap: Alert: No Swap data was found.
Sensors: System Temperatures: cpu: 56.0 C mobo: N/A gpu: radeon temp: 44 C
Fan Speeds (RPM): N/A
Info: Processes: 198 Uptime: 4m Memory: 7.69 GiB used: 1.05 GiB (13.6%) Init: systemd v: 246 Compilers: gcc: N/A
Packages: pacman: 1135 lib: 312 flatpak: 0 Shell: Bash v: 5.0.18 running in: xfce4-terminal inxi: 3.1.05

sudo parted -l :
Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
2 1049kB 83.7GB 83.7GB ntfs msftdata
1 83.7GB 924GB 840GB ntfs msftdata
3 924GB 1000GB 76.5GB ntfs msftdata

Model: ATA ADATA SU800 (scsi)
Disk /dev/sdb: 256GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 1049kB 525MB 524MB fat32 boot, esp
2 525MB 4720MB 4194MB linux-swap(v1) swap
3 4720MB 256GB 251GB ext4

Model: SMI USB DISK (scsi)
Disk /dev/sdc: 31.5GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number Start End Size Type File system Flags
2 2809MB 2813MB 4194kB primary esp

sudo eibootmgr -v :
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0000* EFI USB Device (SMI USB DISK) PciRoot(0x0)/Pci(0x1d,0x0)/USB(0,0)/USB(2,0)/HD(1,MBR,0x0,0x53b7f4,0x2000)RC
Boot0001* manjaro HD(1,GPT,49a01ed9-5d4f-a74f-bcb4-7e49412b08f7,0x800,0xfa000)/File(\EFI\manjaro\grubx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC

test -d /sys/firmware/efi && echo efi || echo bios:
efi

can you check UUID

sudo lsblk -fs 
sudo manjaro-chroot -a ( type 1 if only one line 0 appears )
cat /etc/fstab 
exit ( end chroot )

NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT
loop0 squashfs 4.0 0 100% /run/miso/sfs/livefs
loop1 squashfs 4.0 0 100% /run/miso/sfs/mhwdfs
loop2 squashfs 4.0 0 100% /run/miso/sfs/desktopfs
loop3 squashfs 4.0 0 100% /run/miso/sfs/rootfs
sda1 ntfs New Volume AA9056B2905684AB
└─sda
sda2 ntfs 5225147E6D0E0D04
└─sda
sda3 ntfs 6E1653A057286C73
└─sda
sdb1 vfat FAT32 7ABC-205F
└─sdb
sdb2 swap 1 40bae0dd-5d5f-4c6e-8edf-7b3aa08c0b30
└─sdb
sdb3 ext4 1.0 b8d74c20-bb5c-4d8c-86aa-ecc95bc8ff07
└─sdb
sdc1 iso9660 Joliet Extension MANJARO_XFCE_201 2020-09-11-17-22-12-00
└─sdc iso9660 Joliet Extension MANJARO_XFCE_201 2020-09-11-17-22-12-00 0 100% /run/miso/bootmnt
sdc2 vfat FAT12 MISO_EFI 0DC8-2349
└─sdc iso9660 Joliet Extension MANJARO_XFCE_201 2020-09-11-17-22-12-00 0 100% /run/miso/bootmnt

[manjaro /]# cat /etc/fstab

/etc/fstab: static file system information.

Use ‘blkid’ to print the universally unique identifier for a device; this may

be used with UUID= as a more robust way to name devices that works even if

disks are added and removed. See fstab(5).

UUID=7ABC-205F /boot/efi vfat umask=0077 0 2
UUID=40bae0dd-5d5f-4c6e-8edf-7b3aa08c0b30 swap swap defaults,noatime 0 2
UUID=b8d74c20-bb5c-4d8c-86aa-ecc95bc8ff07 / ext4 defaults,noatime 0 1
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0

do a restore grub-install

sudo manjaro-chroot -a ( type 1 if only one line 0 appears )
grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=manjaro --recheck --verbose
efibootmgr -v
exit ( quit chroot )

Done.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0000* EFI USB Device (SMI USB DISK) PciRoot(0x0)/Pci(0x1d,0x0)/USB(0,0)/USB(2,0)/HD(1,MBR,0x0,0x53b7f4,0x2000)RC
Boot0001* manjaro HD(1,GPT,49a01ed9-5d4f-a74f-bcb4-7e49412b08f7,0x800,0xfa000)/File(\EFI\manjaro\grubx64.efi)
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC

Restarted. not working. Output of efibootmgr, there is no manjaro.
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,2002,2003
Boot0000* EFI USB Device (SMI USB DISK) PciRoot(0x0)/Pci(0x14,0x0)/USB(2,0)/HD(1,MBR,0x0,0x53b7f4,0x2000)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
Boot2003* EFI Network RC

can you do this

sudo manjaro-chroot -a ( type 1 if only one zero 0 appears )
cp /boot/grub/x86_64-efi/core.efi /boot/efi/EFI/boot/bootx64.efi
efibootmgr -c -d /dev/sdb -p 1 -L "manjaro" -l "\EFI\Manjaro\grubx64.efi"
exit ( quit chroot )

What do you mean by type 1 if only one zero 0 appeaes?

There is no /boot inside EFI directory. Created the directory. and executed cmds. Rebooted to no avail.

if you see 0 - manjaro , type 1 not 0

After restart, it takes me to the USB boot menu. Says no uefi files detected.
In the efibootmgr, the entry gets deleted each time I do a reboot.

do the bios show UEFI manjaro , have you also try detect boot disks from USB iso ?

No, bios doesnot show uefi manjaro. I am booting with USB currently.

What should I do? Its been 3 days.

LENNOVO is a GARBAGE laptop. Apparently, it doesnot boot if I put SSD in the DVD ROM place. I swapped HDD and SSD and it worked.
Thanks anyway.

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.