Thank you for jumping in. Please have a look at the outputs:
With Inxi -Gazy:
Graphics:
With sudo dmesg | grep -i nvidia:
[ 1.661566] audit: type=1400 audit(1618884064.530:9): apparmor=“STATUS” o
I am using optimus-manager-qt with hybrid mode loaded when laptop started.
Installed driver:
video-hybrid-intel-nvidia-prime
video-linux
video-modesetting
Thank you for your advice. I installed optimus-manager-qt and set the mode as hybrid at the moment. However, my laptop still can not detect an external monitor through HDMI port. Windows work normally.
The nvidia driver is not loaded yet.
hnthang:
Installed driver:
video-hybrid-intel-nvidia-prime
video-linux
video-modesetting
I only have video-hybrid-intel-nvidia-prime and video-modesetting,where video-linux comes from? try uninstall that to see if the driver loads.
pobrn
20 April 2021 14:03
9
This is a problem, the probe fails. Please try the following:
sudo rmmod nvidia-drm nvidia-modeset nvidia
sudo modprobe nvidia NVreg_ResmanDebugLevel=0
sudo dmesg | egrep -i '(nvrm|nvidia)'
I uninstalled video-linux and keep the driver as attached image, but still nothing happen after reboot.
Please have a look at the outputs:sudo rmmod nvidia-drm nvidia-modeset nvidia:
rmmod: ERROR: Module nvidia_drm is not currently loaded
With sudo modprobe nvidia NVreg_ResmanDebugLevel=0:
modprobe: ERROR: could not insert ‘nvidia’: No such device
With sudo dmesg | egrep -i '(nvrm|nvidia)':
[ 2.891733] nvidia: loading out-of-tree module taints kernel.
Something is wrong with my hardware configuration, right? It’s seem to be complex to me.
pobrn
21 April 2021 08:48
12
This is causing the probe failure. Interesting that it says “0M @ 0x0”, this is very probably not what it should be.
What’s the output of grep -r 'nouveau' /etc/modprobe.d/?
/etc/modprobe.d/mhwd-gpu.conf:blacklist nouveau
/etc/modprobe.d/blacklist-nvidia-nouveau.conf:blacklist nouveau
/etc/modprobe.d/blacklist-nvidia-nouveau.conf:options nouveau modeset=0
Here the output.
pobrn
21 April 2021 10:36
14
I suggest reporting the issue here with a title like “nvidia kernel driver cannot bind to RTX 3060 laptop GPU”, and make sure to include the output of inxi -Gazy, the output of sudo dmesg | egrep -i '(nvrm|nvidia)' that you posted previously, the nvidia driver version, and the kernel version.
Thank you for your help. That means we can not solve the problem right now and have to wait for the updated driver?
Could you tell me my problem regarding the NVIDIA card itself or just the driver not well support for Linux at the moment?
pobrn
21 April 2021 13:13
16
Unfortunately I have no idea, to both questions.
Thank you for your time. I will report to NVIDIA forum and post here when having the answers.
I posted in the NVIDIA forum and here is the answer:
[ 0.463197] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
Please try that advice from dmesg.
[ 3.737] (==) Matched modesetting as autoconfigured driver 0X.Org Foundation”X.Org Video DriverX.Org Video Driver, version 24.1
The intel driver cannot be found…
Sorry if this is too simple but how can I do a booting with pci=realloc? I checked my boot options but nothing regarding graphic card nor pci options.
Thang
pobrn
22 April 2021 14:19
19
If you use GRUB, then open /etc/default/grub, and append pci=realloc to GRUB_CMDLINE_LINUX_DEFAULT so that it says
GRUB_CMDLINE_LINUX_DEFAULT="<other stuff> pci=realloc"
.
Then run sudo update-grub and reboot.
Yeah, updated grub file with pci=realloc but still nothing happen when connecting to HDMI.
pobrn
22 April 2021 17:01
21
What’s the output of inxi -Gazy and sudo dmesg | grep -i pci now?
Please see the outputs:inxi -gazy
Graphics:
sudo dmesg | grep -i pci
[ 0.060255] [mem 0x9f800000-0xdfffffff] available for PCI devicesOSC: OS now controls [PCIeHotplug SHPCHotplu .PCI0.LPCB.EC__: Boot DSDT EC initialization comple#0 AttnBtn- PwrCtrl- MRL-#0 , RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+#0 , RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+#0 , RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
pobrn
22 April 2021 23:53
23
It still says that. Can you run cat /proc/cmdline and confirm that pci=realloc is indeed there?
Thank you so much for your support. It worked now with the option pci=realloc. I deleted from GRUB_CMDLINE_LINUX_DEFAULT="<other stuff> pci=realloc", reboot, and the monitor is out there.
So, the solution is append the option pci=realloc in /etc/default/grub as follows:
GRUB_CMDLINE_LINUX_DEFAULT=“pci=realloc”
We can close the issue now.
