Budgie glitch

#1

When the panel is on the top or on the left and I click on the menu it leaves an outline of the menu after the menu closes, as shown in the image. When on the bottom it does not.

#2

System info?
inxi -Fxxxz
and updated?
sudo pacman-mirrors -f && sudo pacman -Syyuu

#3

This is my system, it's older, but I don't have problems with any other desktop.
Update ... I was wrong the menu outline does happen when the panel is on the bottom too.

 Host: mcfit-pc Kernel: 5.0.5-rt3-MANJARO x86_64 bits: 64 compiler: gcc 
  v: 8.2.1 Desktop: Budgie 10.5 info: budgie-panel wm: budgie-wm 
  dm: LightDM 1.28.0 Distro: Manjaro Linux 
Machine:
  Type: Desktop System: HP-Pavilion product: BK238AA-ABL HPE-142c v: N/A 
  serial: <filter> Chassis: Hewlett-Packard type: 3 serial: <filter> 
  Mobo: MSI model: IONA v: 1.0 serial: <filter> BIOS: American Megatrends 
  v: 5.15 date: 06/25/2010 
CPU:
  Topology: Dual Core model: Intel Core i5 650 bits: 64 type: MT MCP 
  arch: Nehalem rev: 2 L2 cache: 4096 KiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 25539 
  Speed: 1236 MHz min/max: 1200/3201 MHz boost: enabled Core speeds (MHz): 
  1: 1239 2: 1367 3: 1253 4: 1375 
Graphics:
  Device-1: AMD RV710 [Radeon HD 4350/4550] vendor: Micro-Star MSI 
  driver: radeon v: kernel bus ID: 01:00.0 chip ID: 1002:954f 
  Display: x11 server: X.org 1.20.4 driver: ati,radeon unloaded: modesetting 
  alternate: fbdev,vesa compositor: budgie-wm resolution: <xdpyinfo missing> 
  OpenGL: renderer: AMD RV710 (DRM 2.50.0 / 5.0.5-rt3-MANJARO LLVM 8.0.0) 
  v: 3.3 Mesa 19.0.1 compat-v: 3.0 direct render: Yes 
Audio:
  Device-1: Intel 5 Series/3400 Series High Definition Audio 
  vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0 
  chip ID: 8086:3b56 
  Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] 
  vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 01:00.1 
  chip ID: 1002:aa38 
  Sound Server: ALSA v: k5.0.5-rt3-MANJARO 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  vendor: Hewlett-Packard driver: r8168 v: 8.045.08-NAPI port: d800 
  bus ID: 02:00.0 chip ID: 10ec:8168 
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
  Device-2: Qualcomm Atheros AR928X Wireless Network Adapter driver: ath9k 
  v: kernel port: e800 bus ID: 04:00.0 chip ID: 168c:002a 
  IF: wlp4s0 state: down mac: <filter> 
Drives:
  Local Storage: total: 931.51 GiB used: 17.62 GiB (1.9%) 
  ID-1: /dev/sda vendor: Hitachi model: HDT721010SLA360 size: 931.51 GiB 
  speed: 3.0 Gb/s rotation: 7200 rpm serial: <filter> rev: A39D scheme: MBR 
RAID:
  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 
  port: b400 bus ID: 00:1f.2 chip ID: 8086.2822 rev: 06 
Partition:
  ID-1: / size: 907.23 GiB used: 17.62 GiB (1.9%) fs: ext4 dev: /dev/sda1 
  ID-2: swap-1 size: 8.80 GiB used: 1.8 MiB (0.0%) fs: swap dev: /dev/sda2 
Sensors:
  System Temperatures: cpu: 26.0 C mobo: N/A gpu: radeon temp: 62 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 224 Uptime: 1d 58m Memory: 7.72 GiB used: 1.94 GiB (25.2%) 
  Init: systemd v: 241 Compilers: gcc: 8.2.1 Shell: bash v: 5.0.2 
  running in: gnome-terminal inxi: 3.0.32
#4

I installed Budgie on my Mac using Virtualbox and the same problem happens.

Cheers

#5

I've seen the same thing - the bottom edge (sometimes also the right edge) of the menu persists after it hides. This was on two entirely different laptops, one high end with an NVidia 1080 and one portable which must be just integrated graphics. This is a brand new install (it did the same thing when I booted in from USB to do the install, and I hoped maybe an update would resolve - it didn't).

I had to choose nonfree drivers when installing (assume that's what it'd select for the actual install?), because it didn't seem to want to get past a black screen using the other drivers. I'm used to Linux Mint so I might be a little slow on the troubleshooting but I'm willing to entertain suggested resolutions.

manjaro-budgie-18.0.4-stable-x86_64

#6

Sorry for the 2nd reply as I can't seem to do an edit - but I want to add:

I've also installed Budgie onto my primary PC (not a laptop) which runs Linux Mint, and I haven't seen this. I'll try some of the suggestions in the post above later when I get a chance.

#7

This might be referred to here.

"For our Budgie users, we are now using Budgie git builds with GNOME 3.32 support. This support was graciously provided by the Ubuntu Budgie developers and we’re grateful for their contribution to the Budgie Desktop. We have performed a few changes on top of this new support to ensure we continue to use Budgie WM schemas (to make any transitions between stack upgrades and newer Budgie releases occur more smoothly), as well as fixed instances where we would not be performing a redraw on closing the Budgie Menu, resulting in artifacts."